Tool Belts for Every Trade

Occidental Leather 5055 Features

• Even load distribution for reduced hip and back fatigue
• Padded, contoured yoke lined with Dri-Lex for moisture wicking
• Chest pockets for pencils and clip-on items on both sides
• Easy on-off with adjustable chest strap
• Heavy-duty D-ring for hanging the rig
• One size fits most
• Made in USA

Occidental Leather 5055 Applications

• Support and stabilize loaded tool belts during long shifts
• Improve comfort and reduce strain for framing and carpentry work
• Keep suspenders and straps securely positioned while moving
• Hang up belt rig between tasks using center D-ring

Occidental Leather 5055 Installation Overview

1. Attach the leather loop connectors to your work belt (up to 3 in).
2. Clip the suspender straps to the belt loops.
3. Adjust the chest strap for a secure, comfortable fit.
4. Set strap lengths to distribute weight evenly across shoulders.
5. Confirm all connections are secure; D-ring is for hanging only.

Occidental Leather 5035 SM Key Features

• 3 in wide main belt for support
• 2 in leather tongue with steel roller buckle
• Premium 12-14 oz bridle leather construction
• Edge stitched for long-term durability
• Ideal foundation for tool and fastener bags
• Made in USA

Occidental Leather 5035 SM Applications

• Base belt for professional tool carry systems
• Construction and carpentry tool rigs
• Framing, finish work, and general trades
• Pairing with pouches, holsters, and fastener bags

Occidental Leather 5035 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. Thread tool bags and accessories onto the 2 in tongue/loop.
4. Buckle at the midpoint hole; adjust within the 4 in range each way.
5. Ensure comfortable fit over work clothing before use.

Occidental Leather 5009 Features

• Heavy duty bridle leather construction
• Large wool lined shoulder pads for comfort
• Spring clip attachment with loop hardware
• Fully adjustable straps
• Made in USA

Occidental Leather 5009 Applications

• Distribute tool belt weight for reduced strain
• Stabilize heavy tool rigs during carpentry or framing
• Attach to Occidental and other work belts using clips
• Comfort support for long jobsite days

Occidental Leather 5009 Installation Overview

1. Attach spring clips and loop hardware to your work belt.
2. Position suspenders so pads rest on shoulders.
3. Clip suspenders to belt front and rear attachment points.
4. Adjust strap length evenly for desired fit.
5. Check all clips and loops for secure connection before use.

Occidental Leather 5002 M Features

• Premium 12-14 oz bridle leather, custom tanned in the USA
• Edge stitched for durability and clean look
• Heavy duty 2 in steel roller buckle with nickel finish
• Slim 2 in width for compact tool bag setups
• Made in the USA

Occidental Leather 5002 M Applications

• Base belt for tool rigs and pouch systems
• Replacement belt for Occidental Leather setups
• Low profile carry for compact tool bags
• General jobsite wear requiring a durable work belt

Occidental Leather 5002 M Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the most used hole.
2. Select the size closest to that midpoint measurement.
3. If no belt to measure, add 4 in to pant waist for approximate midpoint.
4. Thread the buckle and secure at the midpoint hole; adjust as needed.

Occidental Leather 1546 Features

• Ultra-light industrial nylon construction with padded shoulders
• Even weight distribution for improved comfort
• Chest-height pockets for pencils or clip-on items
• Heavy duty spring clips for quick on/off
• Leather loop attachment system fits up to 3 inch tool belts
• Made in USA

Occidental Leather 1546 Applications

• Support and balance heavy tool belt loads
• Reduce back and hip strain during prolonged wear
• Hold small items at chest height for quick access
• Integrate with tool belts up to 3 inches wide
• Jobsite use for carpenters, electricians, and general trades

Occidental Leather 1546 Installation Overview

1. Slide your tool belt through the leather loop attachments.
2. Secure the heavy duty spring clips.
3. Adjust shoulder straps and back/front buckles for fit.
4. Fasten the chest strap.
5. Load tools and confirm balanced weight distribution.

Occidental Leather 8580M Features

• Hand-specific tool holder layout for efficient workflow
• Padded two-ply bags maintain shape when empty or loaded
• Extremely abrasion-resistant industrial nylon exterior
• Full leather boot with distinctive FatLip leather mouth
• 3 in HD Ranger belt with rear 2-in-1 tool and hammer holder
• Pockets and tool holders: 25
• Made in USA

Occidental Leather 8580M Applications

• Framing and production carpentry
• General carpentry and remodeling
• Jobsite organization for tools and fasteners
• Finish work requiring hand-specific pouch layout

Occidental Leather 8580M Installation Overview

1. Put on the belt over your typical work clothing and note the hole you use.
2. Remove the belt, lay it flat, and measure from the end of the buckle to that hole.
3. Select Medium if your measurement is near 37 in; adjust using the midpoint hole for fit.

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 9850 Key Features

• FatLip leather mouth stays open and resists abrasion
• Main bags are 10 in deep with full leather boot
• Adjust-to-Fit belt for 32 in to 41 in waist sizes
• Rear 2-in-1 Tool and Hammer Holder
• Includes Oxy Tool Shield for sharp tool protection
• 24 total pockets and tool holders
• Crafted from high density neoprene, rugged nylon, and full grain leather
• Made in the USA

Occidental Leather 9850 Applications

• Carpentry and framing tool organization
• Remodeling and general construction tasks
• Jobsite fastener and hand tool carry
• Use with suspenders via preinstalled D-rings

Occidental Leather 9850 Installation Overview

1. Measure where you wear your tool belt to confirm size.
2. Adjust the belt to fit 32 in to 41 in waist range.
3. Position tool and fastener bags to your handed layout.
4. Attach the 2-in-1 holder and Oxy Tool Shield as desired.
5. Check D-rings and belt security before use.

Occidental Leather 8582 Key Features

• 10 in deep bag with full leather boot for structure and durability
• Leather FatLip mouth holds shape, stays open, and protects against abrasion
• Right-side layout for tools most accessed with the right hand
• 13 total pockets and holders for organized storage
• Made in the USA

Occidental Leather 8582 Applications

• Organizing and carrying hand tools on the jobsite
• Carpentry and framing tool storage
• General construction and remodeling
• Punch list and service work

Occidental Leather 8582 Installation Overview

1. Thread the pouch onto your work belt.
2. Wear on the right side for right-hand access.
3. Load tools into the dedicated pockets and holders.
4. Verify secure fit and balanced weight before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5018DB Features

• 11 total pockets and tool holders for efficient organization
• Integrated tape holster fits tapes up to a 35 ft FatMax
• Hammer loop for quick access
• Premium leather construction, made in USA
• Right-side wear for dominant hand access; left-hand version available

Occidental Leather 5018DB Applications

• General carpentry and framing tool organization
• Finish work where frequent tool access is required
• Jobsite carry for measuring, marking, and cutting tools

Occidental Leather 5018DB Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Position on the right side for dominant hand access.
3. Secure the tape, hammer, and hand tools in designated holders.
4. Confirm balance and adjust placement for comfort.

Occidental Leather 9525XXL Key Features

• 25 pockets and tool holders
• Round bottom, full capacity bags maintain shape
• Includes 2003 Oxy Tool Shield
• Hand specific tool layout for work rhythm
• 12 oz belting leather with steel roller buckle and padded nylon belt

Occidental Leather 9525XXL Applications

• Trim installation and finish carpentry
• Light framing and punch list tasks
• Cabinet, door, and window setting
• General tool carry and organization on site

Occidental Leather 9525XXL Installation Overview

1. Measure existing belt from buckle to the hole used to determine belt size.
2. Adjust the work belt so pouches ride at a comfortable height.
3. Place fastener bag on left and tool bag on right for standard layout.
4. Attach Oxy Tool Shield and 2-in-1 holder to preferred positions.
5. Load tools and confirm balance and comfort before use.

Occidental Leather 8018DB Features

• Popular OxyLights configuration with right-hand layout
• Dedicated holders for common hand tools and tape up to 35 ft
• Main bag corners reinforced for durability
• Leather and industrial nylon construction
• Made in the USA

Occidental Leather 9855 Key Features

• FatLip bag mouth stays open and resists abrasion
• Main bags 10 in deep with full leather boot
• Adjust-to-Fit belt fits 32 in to 41 in waist sizes
• D rings pre installed for suspension system compatibility
• Includes rear 2 in 1 Tool and Hammer Holder and Oxy Tool Shield
• 24 total pockets and tool holders
• Made in USA

Occidental Leather 9855 Applications

• Carry and organize hand tools, fasteners, and accessories on the jobsite
• Framing and general carpentry tasks
• Remodeling and punch list work requiring frequent tool access
• Use with suspension systems for added support

Occidental Leather 9855 Installation Overview

1. Measure where you wear your tool belt and select the Adjust to Fit range accordingly.
2. Place belt over work clothing and buckle at a comfortable midpoint hole.
3. Adjust belt tabs to fit 32 in to 41 in waist sizes.
4. Position tool and fastener bags on preferred sides and secure.
5. Attach the 2 in 1 holder and Oxy Tool Shield; add suspenders to D rings if desired.

Occidental Leather 5530 XL Features

• Round bottom full-capacity leather bags for greater storage and wear
• Premium top-grain leather with heritage-quality construction
• Hand-specific NoSpill tool holder system
• 3 in English bridle leather belt with steel roller buckle
• Pockets and tool holders: 28
• Includes Oxy Tool Shield and 2-in-1 tool and hammer holder
• Belt size: XL

Occidental Leather 5530 XL Applications

• Framing and rough carpentry tool carry
• Trim carpentry and finish work organization
• General construction and remodeling
• On-belt storage for measuring, cutting, and fastening tools
• Daily professional jobsite use

Occidental Leather 5530 XL Installation Overview

1. Size the belt to XL fit and fasten the steel roller buckle.
2. Slide tool and fastener bags onto the belt and position as preferred.
3. Attach the 2-in-1 tool and hammer holder and Oxy Tool Shield to the belt or bag loops.
4. Load tools into hand-specific pockets to prevent spills.
5. Adjust belt and bag placement for balance and comfort.

Occidental Leather 2500 Features

• Wide padded shoulder support lined with Dri Lex for comfort
• Fully adjustable straps for a personalized fit
• Even load distribution to reduce fatigue
• 17 pockets and holders to minimize tool clutter
• Quick release chest strap buckle for fast on off
• Heavy duty D ring for hanging storage

Occidental Leather 2500 Applications

• Framing tasks where balanced tool carry is needed
• Electrical work requiring quick access to hand tools
• Concrete work and general construction
• Trim and finish work in tight spaces

Occidental Leather 2500 Installation Overview

1. Adjust shoulder straps and chest buckle for a comfortable fit.
2. Attach compatible tool bags to the 3 inch leather belting as needed.
3. Load tools evenly across pockets to balance weight.
4. Snap the chest strap buckle to secure the vest.
5. Use the D ring for hanging storage when not in use.

Occidental Leather 5355 Key Features

• Suspension system redistributes belt load for reduced strain
• Hip Buddies padding softens impact on hips and lower back
• Accepts any bag up to 7.5 inches wide
• Made in USA; leather and nylon construction
• Available colors: OxyRed and Black
• Not compatible with Adjust-to-Fit systems or Stronghold Comfort Belts; does not fit 5525 or B5611 bags

Occidental Leather 5355 Applications

• Comfort upgrade for heavy tool belt setups
• Reducing hip and lower back fatigue on long shifts
• General construction, carpentry, electrical, and remodeling work
• Supporting weight evenly during climbing, bending, and overhead tasks

Occidental Leather 5355 Installation Overview

1. Attach the 9008 Hip Buddies around your work belt at the hip areas.
2. Clip the 5055 suspension straps to the belt D-rings or belt loops per your setup.
3. Adjust front and rear strap lengths for even weight distribution.
4. Secure the chest strap for stability and fine tune fit.
5. Verify bag width does not exceed 7.5 inches and confirm compatibility.

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.

Occidental Leather 5525 Key Features

• Round-bottom design increases internal volume and stability
• 10 pockets and holders optimized for fasteners and layout tools
• Tape pocket fits tapes up to 35 ft
• Includes Oxy Tool Shield to protect sharp tools, bags, and body
• Right-hand layout; worn on the left side
• Premium leather construction; Made in the USA

Occidental Leather 5525 Applications

• Fastener storage for framing and carpentry tasks
• Organizing layout tools like squares and bits
• Measuring and marking with quick tape access
• Daily jobsite carry on a work belt

Occidental Leather 5525 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed use.
3. Insert the Oxy Tool Shield into the designated holder.
4. Load fasteners and tools into the appropriate pockets.
5. Confirm secure fit and balance before use.

Occidental Leather 5526 Key Features

• Round-bottom leather construction adds volume and resists collapse
• Tool-specific storage: torpedo level slot, bit holders, pencil and chisel pockets
• Right-hand layout; worn on the right side
• Includes Oxy Tool Shield for safe carry of sharp tools
• Not available in a left-hand model

Occidental Leather 5526 Applications

• Carpentry and framing tool organization on a work belt
• Right-hand access to frequently used tools
• Jobsite fastener and small tool storage
• General construction and remodeling tasks

Occidental Leather 5526 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for dominant-hand access.
3. Insert the Oxy Tool Shield into the designated pocket.
4. Load tools into dedicated holders and pockets.
5. Check balance and security before working.

Occidental Leather 2580 Key Features

• Maximum comfort with wide padded shoulder yoke lined with Dri-Lex for moisture control
• Even load distribution reduces back fatigue and increases carry efficiency
• Fully adjustable straps; one size fits most
• Quick release chest buckle for fast on/off
• Heavy-duty storage D-ring for hanging
• 36 pockets and tool holders for organized access
• Made in USA

Occidental Leather 2580 Applications

• Framing tasks requiring balanced tool carry
• Electrical installations and service work
• Concrete forming and layout
• Trim carpentry and finish work

Occidental Leather 2580 Installation Overview

1. Adjust shoulder straps and side straps for a comfortable fit.
2. Attach included tool and fastener bags to the leather belting.
3. Secure the chest buckle; verify even weight distribution.
4. Load essential tools into pockets and holders.
5. Use the D-ring to hang the vest when storing off the clock.

Occidental Leather 5585 Key Features

• Divided upright interior — 16 screwdriver loops and 9 center compartments
• Exterior storage — 6 outside pockets and 6 outside tool loops
• Rugged build — heavy lock-stitched nylon thread and reinforced bottom
• Leather luggage-style handle for comfortable carry
• Steel Dee hardware for optional shoulder strap
• Includes snap clip and location strap for clip-on items
• Made in the USA

Occidental Leather 5585 Applications

• Organizing and transporting hand tools on the jobsite
• Electrician, maintenance, and service technician tool carry
• Workshop storage for frequently used tools and fasteners
• Clip-on accessory expansion with included 9501 bag and Tool Shields

Occidental Leather 5585 Installation Overview

1. Load tools into divided interior and loops for balanced weight.
2. Attach 9501 clip-on bag and Tool Shields to desired locations.
3. Use the leather handle for carry; add a shoulder strap to Dee rings if desired.
4. Inspect rivets and stitching periodically to ensure secure carry.

Occidental Leather 8584 Key Features

• 10 in deep main pouch with structured FatLip leather mouth
• Full leather boot for rugged longevity
• 13 pockets and tool holders for everyday layout tools
• Right-side layout; left-hand version available as 8584LH
• Made in the USA

Occidental Leather 8584 Applications

• Organizing and carrying hand tools on a tool belt
• Framing and general carpentry tasks
• Remodeling and jobsite maintenance work
• Right-hand dominant tool layouts

Occidental Leather 8584 Installation Overview

1. Slide the bag onto a compatible work belt through the leather belt slot.
2. Position on the right side for right-hand use (or choose 8584LH for left-hand use).
3. Load tools by category into interior and exterior holders.
4. Secure any clips or add-on holders as needed and check balance.

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.