Occidental Leather Electrician Tool Belts & Bags

Occidental Leather 5589 Key Features

• All leather commercial grade electricians case
• 25 pockets and holders for comprehensive tool organization
• Heavy duty electrical tape chain and metal utility clip
• Right side wear layout for right handed users
• Black leather tool holders with reinforced stitching
• Made in USA

Occidental Leather 5589 Applications

• Commercial and residential electrical work
• Organizing and carrying pliers, strippers, screwdrivers, and meters
• Quick access to electrical tape, markers, and small tools

Occidental Leather 5589 Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Position on the right side for right handed workflow.
3. Load frequently used tools into front holders; place bulk items in the main bag.
4. Attach electrical tape to the chain and clip small items to the utility clip.
5. Adjust placement on belt for comfort and balance.

Occidental Leather 5590M Key Features

• Hand-specific layout promotes efficient workflow
• NoSpill leather holders for secure, form-fit tool retention
• 37 pockets and holders for full jobsite loadouts
• Rugged leather build with select industrial nylon components
• Made in USA

Occidental Leather 5590M Applications

• Commercial electrical installation and service
• Tool and fastener organization on the jobsite
• Journeyman-level daily use
• General maintenance and troubleshooting

Occidental Leather 5590M Installation Overview

1. Measure from belt buckle end to the hole you use on your current tool belt.
2. Select the medium size if your measurement aligns with 37 in midpoint.
3. Position tool bags for hand-specific workflow.
4. Secure hammer holder and accessories to the belt.
5. Load tools and adjust fit for comfort.

Occidental Leather 5006 Features

• Thick-pile sheepskin lining for maximum comfort
• Heavy harness leather exterior for durability
• No leading edge to prevent pressure points
• Slots accept belts up to 3 in wide
• Requires 1 to 2 in extra belt length
• Lighter than full belt liner model 5005
• Handmade in USA

Occidental Leather 5006 Applications

• Increase comfort when wearing loaded tool belts
• Reduce hip pressure during carpentry and framing work
• Use under tool bags to cushion heavy setups
• Improve circulation on long wear days

Occidental Leather 5006 Installation Overview

1. Loosen or remove tool bags from the work belt.
2. Slide each hip pad onto the belt using the end slots and position at the hips.
3. Reattach tool bags over the pads as needed.
4. Adjust belt length to account for 1 to 2 in extra length.
5. Check fit and comfort before use.

Occidental Leather 9501 Key Features

• Cost efficient fastener management
• Single clip-on design for quick swaps between applications
• Keep multiple pouches preloaded and clipped to your toolbox or truck
• Adds fastener storage or sub divides existing main bags
• Secure steel clip fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9501 Applications

• Add fastener capacity to any belt setup
• Sub-divide larger tool bags for better organization
• Preload pouches for task-specific jobs and swap quickly
• Clip to toolboxes or bags for mobile storage
• Use on belts up to 2 inches wide

Occidental Leather 9501 Installation Overview

1. Load fasteners or small parts into the pouch.
2. Position the steel clip over a belt up to 2 inches wide or onto a toolbox/bag edge.
3. Press firmly to seat the clip securely.
4. Arrange multiple preloaded pouches as needed for the task.
5. Remove and swap pouches when changing applications.

Occidental Leather 9596 Key Features

• All-leather construction built for commercial electricians
• Adjust-to-Fit belt fits 32 to 40 inch pant waists
• NoSpill leather holders help prevent tool drops
• Hand-specific layout for fast, efficient access
• Balanced design for all-day comfort
• Made in the USA

Occidental Leather 9596 Applications

• Electrical install and service tasks
• Rough-in and finish wiring work
• Panel, fixture, and device installation
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use.
2. Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
3. Position pouches and holders for hand-specific access.
4. Cinch belt to a comfortable, balanced fit and verify tool retention.

Occidental Leather 5053 Key Features

• Five pockets and tool holders in a compact layout
• Dedicated test meter pocket fits most compact testers
• Snap loop carry hangs over belts up to 2 inches wide or carry standalone
• All-leather, professional grade construction
• Made in USA

Occidental Leather 5053 Applications

• Estimating and inspections
• Troubleshooting and service calls
• Trim-out and finish electrical tasks

Occidental Leather 5053 Installation Overview

1. Open snap loop and place over a belt up to 2 inches wide or carry by hand.
2. Seat the caddy against the belt and close the snap securely.
3. Load tools into the five pockets, placing the test meter in the larger pocket.
4. Verify all tools are seated and the snap is fully engaged before use.

Occidental Leather 5500 Key Features

• All leather construction for durability
• 15 pockets and tool holders for everyday electrical tools
• Flashlight loop, electrical tape chain, and quick release tool snap
• Heavy duty hammer holder
• Tunnel loop mount fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5500 Applications

• Daily electrical service and installation
• Organized belt carry for screwdrivers, pliers, and testers
• Maintenance and facility repair work
• Remodeling and jobsite troubleshooting

Occidental Leather 5500 Installation Overview

1. Thread work belt through the tunnel loop; fits up to 3 in. width.
2. Load core tools into dedicated pockets and sleeves.
3. Attach small tools to the quick release snap as needed.
4. Hang electrical tape rolls on the chain for quick access.
5. Confirm balance and secure fit before use.

Occidental Leather 5036SM Key Features

• Premium top grain leather tool bags
• 12 oz belting leather belt with steel roller buckle
• NoSpill tool holder system keeps tools upright
• Hand specific organization engineered for electricians
• Made in USA

Occidental Leather 5036SM Applications

• Electrical install and service work
• Wire termination and panel assembly
• Commercial and residential troubleshooting
• Tool and fastener organization on the jobsite

Occidental Leather 5036SM Installation Overview

1. Measure an existing work belt from buckle end to the most used hole to find belt size.
2. Wear over normal work clothes and note the hole used for fastening.
3. Select Small size if your measured midpoint is about 34 in.
4. Assemble components on the belt in your preferred hand specific layout.

Occidental Leather 5022 Key Features

• Top-grain leather construction for comfort and durability
• Non-marring surface helps prevent floor scuffs
• High-density padding with inner plastic shield minimizes pressure points
• Quick release fasteners for easy on and off
• Made in the USA

Occidental Leather 5022 Applications

• Interior remodeling and finish work
• Flooring installation without scuffing surfaces
• General jobsite knee protection

Occidental Leather 5022 Installation Overview

1. Place pads over knees with curved edge down.
2. Secure quick release buckles and straps.
3. Adjust for snug, comfortable fit; avoid overtightening.
4. Verify pads do not shift during movement.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather 5010 Features

• 1 inch wide leather loop supports a safety release snap
• Ideal for saw keys, small wrenches, and similar items
• Keeps frequently used tools within easy reach
• Durable leather construction
• Made in USA

Occidental Leather 5010 Applications

• Hang keys, small wrenches, and accessories from a belt or bag
• Add quick access clip point to tool belts or pouches
• Organize frequently used small tools on the jobsite

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt, strap, or D ring.
2. Secure the loop so the snap hangs freely.
3. Clip keys or small tools to the safety release snap.
4. Verify the snap opens and closes smoothly before use.

Occidental Leather 5585 Key Features

• Divided upright interior — 16 screwdriver loops and 9 center compartments
• Exterior storage — 6 outside pockets and 6 outside tool loops
• Rugged build — heavy lock-stitched nylon thread and reinforced bottom
• Leather luggage-style handle for comfortable carry
• Steel Dee hardware for optional shoulder strap
• Includes snap clip and location strap for clip-on items
• Made in the USA

Occidental Leather 5585 Applications

• Organizing and transporting hand tools on the jobsite
• Electrician, maintenance, and service technician tool carry
• Workshop storage for frequently used tools and fasteners
• Clip-on accessory expansion with included 9501 bag and Tool Shields

Occidental Leather 5585 Installation Overview

1. Load tools into divided interior and loops for balanced weight.
2. Attach 9501 clip-on bag and Tool Shields to desired locations.
3. Use the leather handle for carry; add a shoulder strap to Dee rings if desired.
4. Inspect rivets and stitching periodically to ensure secure carry.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 5031 Key Features

• Belt-worn utility attachment for spring-snap tools
• Fits up to a 3 inch work belt
• 3/4 inch dee ring for secure clipping
• Leather strap construction for durability
• Snap closure secures around belt
• Made in USA

Occidental Leather 5031 Applications

• Carry telephone butt-sets and testers from a belt
• Attach meters, small tools, or lanyards via spring snaps
• Add a quick-access ring point to tool belts
• Organize clip-on accessories for electricians and technicians
• Temporary attachment point for keys or ID holders on the job

Occidental Leather 5031 Installation Overview

1. Open the strap and place it around your work belt.
2. Position the dee ring where you want access.
3. Snap the closure to secure the strap to the belt.
4. Attach the spring snap from your tool or lanyard to the dee ring.
5. Confirm the snap and ring are fully engaged before use.

Occidental Leather 9511 Key Features

• Cost efficient fastener management
• Modular clip-on design for easy swap between tasks
• Slightly deeper and narrower than the 9501
• Clips to belts up to 2 in wide; also clips to toolboxes or truck interiors
• Made in USA

Occidental Leather 9511 Applications

• Carrying nails, screws, and small fasteners
• Modular add-on storage for tool belts
• Quick-change setups for varied tasks
• Clipping to a truck or toolbox for organized access

Occidental Leather 9511 Installation Overview

1. Verify your belt is no wider than 2 in.
2. Slide the clip over the belt edge until fully seated.
3. Load fasteners into the pouch.
4. Adjust position on belt for comfort and reach.
5. Remove and reclip as needed for different applications.

Occidental Leather 2580LH Features

• Wide padded shoulder support lined with Dri Lex for moisture management
• Fully adjustable straps for a comfortable fit on most builders
• Balanced load carry to reduce strain and lower back fatigue
• 36 pockets and holders keep essential tools accessible
• Quick release chest buckle and heavy duty D ring for hanging storage

Occidental Leather 2580LH Applications

• Framing tasks needing high capacity tool access
• Electrical work with balanced weight distribution
• Concrete forming and layout
• Trim and finish work in tight spaces

Occidental Leather 2580LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure, comfortable fit.
2. Attach B8064LH and B8017LH bags to the 3 in leather belting.
3. Ensure tunnel loop attachments are seated; tighten as needed.
4. Load tools into the 36 pockets and holders to balance weight.
5. Use the D ring for hanging storage when removing the vest.

Occidental Leather 1355 Key Features

• Five color coded pouches for quick sorting
• Durable industrial nylon construction
• Zip top closure with leather pull
• Compact 12 x 7 in size for small tools and parts
• Made in USA

Occidental Leather 1355 Applications

• Organizing small tools and accessories
• Separating fasteners, anchors, and hardware
• Storing bits, blades, and connectors
• Jobsite grab and go parts management

Occidental Leather 1355 Installation Overview

1. Load items into each pouch by category or color code.
2. Zip closed and attach together via ring or store in tool bag.
3. Grab the needed pouch on the job and return to storage after use.