Go Light for Summer

Occidental Leather 5055 Features

• Even load distribution for reduced hip and back fatigue
• Padded, contoured yoke lined with Dri-Lex for moisture wicking
• Chest pockets for pencils and clip-on items on both sides
• Easy on-off with adjustable chest strap
• Heavy-duty D-ring for hanging the rig
• One size fits most
• Made in USA

Occidental Leather 5055 Applications

• Support and stabilize loaded tool belts during long shifts
• Improve comfort and reduce strain for framing and carpentry work
• Keep suspenders and straps securely positioned while moving
• Hang up belt rig between tasks using center D-ring

Occidental Leather 5055 Installation Overview

1. Attach the leather loop connectors to your work belt (up to 3 in).
2. Clip the suspender straps to the belt loops.
3. Adjust the chest strap for a secure, comfortable fit.
4. Set strap lengths to distribute weight evenly across shoulders.
5. Confirm all connections are secure; D-ring is for hanging only.

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 9850 Key Features

• FatLip leather mouth stays open and resists abrasion
• Main bags are 10 in deep with full leather boot
• Adjust-to-Fit belt for 32 in to 41 in waist sizes
• Rear 2-in-1 Tool and Hammer Holder
• Includes Oxy Tool Shield for sharp tool protection
• 24 total pockets and tool holders
• Crafted from high density neoprene, rugged nylon, and full grain leather
• Made in the USA

Occidental Leather 9850 Applications

• Carpentry and framing tool organization
• Remodeling and general construction tasks
• Jobsite fastener and hand tool carry
• Use with suspenders via preinstalled D-rings

Occidental Leather 9850 Installation Overview

1. Measure where you wear your tool belt to confirm size.
2. Adjust the belt to fit 32 in to 41 in waist range.
3. Position tool and fastener bags to your handed layout.
4. Attach the 2-in-1 holder and Oxy Tool Shield as desired.
5. Check D-rings and belt security before use.

Occidental Leather 9855 Key Features

• FatLip bag mouth stays open and resists abrasion
• Main bags 10 in deep with full leather boot
• Adjust-to-Fit belt fits 32 in to 41 in waist sizes
• D rings pre installed for suspension system compatibility
• Includes rear 2 in 1 Tool and Hammer Holder and Oxy Tool Shield
• 24 total pockets and tool holders
• Made in USA

Occidental Leather 9855 Applications

• Carry and organize hand tools, fasteners, and accessories on the jobsite
• Framing and general carpentry tasks
• Remodeling and punch list work requiring frequent tool access
• Use with suspension systems for added support

Occidental Leather 9855 Installation Overview

1. Measure where you wear your tool belt and select the Adjust to Fit range accordingly.
2. Place belt over work clothing and buckle at a comfortable midpoint hole.
3. Adjust belt tabs to fit 32 in to 41 in waist sizes.
4. Position tool and fastener bags on preferred sides and secure.
5. Attach the 2 in 1 holder and Oxy Tool Shield; add suspenders to D rings if desired.

Occidental Leather 9515 Features

• Adjustable fit for pant waist 32 to 41
• Fixed bag design prevents shifting
• D rings pre-installed for suspender attachment
• Padded two-ply bags hold their shape
• Extremely abrasion-resistant industrial nylon
• Leather tool holders and corner reinforcement
• Includes High Mount Hammer Holder 5059
• Hand-specific tool placement for efficient workflow
• Left-handed model available as 9515LH

Occidental Leather 9515 Applications

• Framing and rough carpentry
• Jobsite tool and fastener organization
• Use with suspender systems via pre-installed D rings
• Seasonal gear changes requiring belt size adjustment
• Daily professional construction work

Occidental Leather 9515 Installation Overview

1. Measure where you wear your tool belt and set belt size to fit 32 to 41 pant waist.
2. Position tool bag on dominant side and fastener bag on opposite side.
3. Secure the belt and lock the adjust-to-fit crossover system.
4. Attach the removable hammer holder and any suspenders to D rings.
5. Load tools and fasteners; confirm bags are fixed and balanced.

Occidental Leather 2500 Features

• Wide padded shoulder support lined with Dri Lex for comfort
• Fully adjustable straps for a personalized fit
• Even load distribution to reduce fatigue
• 17 pockets and holders to minimize tool clutter
• Quick release chest strap buckle for fast on off
• Heavy duty D ring for hanging storage

Occidental Leather 2500 Applications

• Framing tasks where balanced tool carry is needed
• Electrical work requiring quick access to hand tools
• Concrete work and general construction
• Trim and finish work in tight spaces

Occidental Leather 2500 Installation Overview

1. Adjust shoulder straps and chest buckle for a comfortable fit.
2. Attach compatible tool bags to the 3 inch leather belting as needed.
3. Load tools evenly across pockets to balance weight.
4. Snap the chest strap buckle to secure the vest.
5. Use the D ring for hanging storage when not in use.

Occidental Leather 9596 Key Features

• All-leather construction built for commercial electricians
• Adjust-to-Fit belt fits 32 to 40 inch pant waists
• NoSpill leather holders help prevent tool drops
• Hand-specific layout for fast, efficient access
• Balanced design for all-day comfort
• Made in the USA

Occidental Leather 9596 Applications

• Electrical install and service tasks
• Rough-in and finish wiring work
• Panel, fixture, and device installation
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use.
2. Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
3. Position pouches and holders for hand-specific access.
4. Cinch belt to a comfortable, balanced fit and verify tool retention.

Key Features

• Hand-specific tool holders for efficient access
• Padded two-ply, foam-core bags maintain shape
• Abrasion-resistant industrial nylon construction
• Adjust-to-Fit belt allows quick sizing changes
• D-rings pre-installed for suspension system compatibility
• Left-handed model available as 9540LH
• Made in USA

Applications

• Finish carpentry setups
• Trim installation
• Light framing tasks
• General jobsite tool and fastener organization

Installation Overview

1. Adjust belt to fit over typical work clothing.
2. Position left fastener and right tool bags for reach preference.
3. Attach the high mount hammer holder at the center back.
4. Clip Oxy Tool Shields to bags or belt as needed.
5. Load tools and fasteners evenly; connect suspenders to D-rings if used.

Occidental Leather 8003 SM Key Features

• 3 in. padded industrial nylon belt body for comfort and support
• 2 in. heavy leather tongue with nickel plated steel roller buckle
• Lightweight design reduces fatigue during long wear
• Works with most tool bags and suspenders
• Made in USA

Occidental Leather 8003 SM Applications

• Foundation belt for building custom tool rig setups
• Daily jobsite tool carry for tradespeople
• Use with suspenders for added load distribution
• Compatible base for professional tool and fastener bags

Occidental Leather 8003 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine belt size.
2. Select size Small if your midpoint measurement is 34 in. (approx. pant waist 29 in. to 32 in.).
3. Thread the leather tongue through the roller buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags to the belt body as needed.
5. Optional: connect suspenders to distribute weight.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.