Tool Belts for Every Trade

Occidental Leather 9596 Key Features

• All-leather construction built for commercial electricians
• Adjust-to-Fit belt fits 32 to 40 inch pant waists
• NoSpill leather holders help prevent tool drops
• Hand-specific layout for fast, efficient access
• Balanced design for all-day comfort
• Made in the USA

Occidental Leather 9596 Applications

• Electrical install and service tasks
• Rough-in and finish wiring work
• Panel, fixture, and device installation
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use.
2. Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
3. Position pouches and holders for hand-specific access.
4. Cinch belt to a comfortable, balanced fit and verify tool retention.

Key Features

• Hand-specific tool holders for efficient access
• Padded two-ply, foam-core bags maintain shape
• Abrasion-resistant industrial nylon construction
• Adjust-to-Fit belt allows quick sizing changes
• D-rings pre-installed for suspension system compatibility
• Left-handed model available as 9540LH
• Made in USA

Applications

• Finish carpentry setups
• Trim installation
• Light framing tasks
• General jobsite tool and fastener organization

Installation Overview

1. Adjust belt to fit over typical work clothing.
2. Position left fastener and right tool bags for reach preference.
3. Attach the high mount hammer holder at the center back.
4. Clip Oxy Tool Shields to bags or belt as needed.
5. Load tools and fasteners evenly; connect suspenders to D-rings if used.

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 5525 Key Features

• Round-bottom design increases internal volume and stability
• 10 pockets and holders optimized for fasteners and layout tools
• Tape pocket fits tapes up to 35 ft
• Includes Oxy Tool Shield to protect sharp tools, bags, and body
• Right-hand layout; worn on the left side
• Premium leather construction; Made in the USA

Occidental Leather 5525 Applications

• Fastener storage for framing and carpentry tasks
• Organizing layout tools like squares and bits
• Measuring and marking with quick tape access
• Daily jobsite carry on a work belt

Occidental Leather 5525 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed use.
3. Insert the Oxy Tool Shield into the designated holder.
4. Load fasteners and tools into the appropriate pockets.
5. Confirm secure fit and balance before use.

Occidental Leather 5526 Key Features

• Round-bottom leather construction adds volume and resists collapse
• Tool-specific storage: torpedo level slot, bit holders, pencil and chisel pockets
• Right-hand layout; worn on the right side
• Includes Oxy Tool Shield for safe carry of sharp tools
• Not available in a left-hand model

Occidental Leather 5526 Applications

• Carpentry and framing tool organization on a work belt
• Right-hand access to frequently used tools
• Jobsite fastener and small tool storage
• General construction and remodeling tasks

Occidental Leather 5526 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for dominant-hand access.
3. Insert the Oxy Tool Shield into the designated pocket.
4. Load tools into dedicated holders and pockets.
5. Check balance and security before working.

Occidental Leather 2580 Key Features

• Maximum comfort with wide padded shoulder yoke lined with Dri-Lex for moisture control
• Even load distribution reduces back fatigue and increases carry efficiency
• Fully adjustable straps; one size fits most
• Quick release chest buckle for fast on/off
• Heavy-duty storage D-ring for hanging
• 36 pockets and tool holders for organized access
• Made in USA

Occidental Leather 2580 Applications

• Framing tasks requiring balanced tool carry
• Electrical installations and service work
• Concrete forming and layout
• Trim carpentry and finish work

Occidental Leather 2580 Installation Overview

1. Adjust shoulder straps and side straps for a comfortable fit.
2. Attach included tool and fastener bags to the leather belting.
3. Secure the chest buckle; verify even weight distribution.
4. Load essential tools into pockets and holders.
5. Use the D-ring to hang the vest when storing off the clock.

Occidental Leather 5585 Key Features

• Divided upright interior — 16 screwdriver loops and 9 center compartments
• Exterior storage — 6 outside pockets and 6 outside tool loops
• Rugged build — heavy lock-stitched nylon thread and reinforced bottom
• Leather luggage-style handle for comfortable carry
• Steel Dee hardware for optional shoulder strap
• Includes snap clip and location strap for clip-on items
• Made in the USA

Occidental Leather 5585 Applications

• Organizing and transporting hand tools on the jobsite
• Electrician, maintenance, and service technician tool carry
• Workshop storage for frequently used tools and fasteners
• Clip-on accessory expansion with included 9501 bag and Tool Shields

Occidental Leather 5585 Installation Overview

1. Load tools into divided interior and loops for balanced weight.
2. Attach 9501 clip-on bag and Tool Shields to desired locations.
3. Use the leather handle for carry; add a shoulder strap to Dee rings if desired.
4. Inspect rivets and stitching periodically to ensure secure carry.

Occidental Leather 8003 SM Key Features

• 3 in. padded industrial nylon belt body for comfort and support
• 2 in. heavy leather tongue with nickel plated steel roller buckle
• Lightweight design reduces fatigue during long wear
• Works with most tool bags and suspenders
• Made in USA

Occidental Leather 8003 SM Applications

• Foundation belt for building custom tool rig setups
• Daily jobsite tool carry for tradespeople
• Use with suspenders for added load distribution
• Compatible base for professional tool and fastener bags

Occidental Leather 8003 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine belt size.
2. Select size Small if your midpoint measurement is 34 in. (approx. pant waist 29 in. to 32 in.).
3. Thread the leather tongue through the roller buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags to the belt body as needed.
5. Optional: connect suspenders to distribute weight.

Occidental Leather B8080DBSM Key Features

• Hand-specific tool holder layout for efficient workflow
• Double-wall padded nylon bags maintain structure
• Abrasion-resistant industrial nylon construction
• 12 oz belting leather belt with steel roller buckle
• Leather-reinforced corners and tool holders

Occidental Leather B8080DBSM Applications

• Framing and rough carpentry
• General construction tool carry
• Jobsite fastener and tool organization

Occidental Leather B8080DBSM Installation Overview

1. Measure belt fit from buckle end to your most used hole to confirm size.
2. Attach both outer bags to the belt in your preferred handed layout.
3. Secure the hammer holder at rear center and tighten belt at midpoint hole.
4. Load tools and fasteners; adjust pouch positions for balance and access.
5. Verify all rivets, snaps, and holders are seated before use.

Occidental Leather 8584 Key Features

• 10 in deep main pouch with structured FatLip leather mouth
• Full leather boot for rugged longevity
• 13 pockets and tool holders for everyday layout tools
• Right-side layout; left-hand version available as 8584LH
• Made in the USA

Occidental Leather 8584 Applications

• Organizing and carrying hand tools on a tool belt
• Framing and general carpentry tasks
• Remodeling and jobsite maintenance work
• Right-hand dominant tool layouts

Occidental Leather 8584 Installation Overview

1. Slide the bag onto a compatible work belt through the leather belt slot.
2. Position on the right side for right-hand use (or choose 8584LH for left-hand use).
3. Load tools by category into interior and exterior holders.
4. Secure any clips or add-on holders as needed and check balance.

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.

Occidental Leather 5135 XXL Key Features

• 5 in. wide belt for enhanced back support
• Built-in suspender attachment loops
• Thick padded wool liner for comfort and moisture control
• Heavy duty buckles and belt loops minimize bag sliding
• Edge stitched leather for added strength

Occidental Leather 5135 XXL Applications

• Securely carry tool bags and pouches
• Provide back support during long workdays
• Use with suspenders for balanced load distribution
• Carpentry, framing, and general construction tasks
• Comfortable wear over layered work clothing

Occidental Leather 5135 XXL Installation Overview

1. Measure your current tool belt from buckle end to the hole you use.
2. Select size based on midpoint measurement; size up if between.
3. Wear over typical work clothing and fasten at the midpoint hole.
4. Attach tool bags to the overbelt loops; tighten to prevent sliding.
5. Clip suspenders to built-in loops for added support if needed.

Occidental Leather 8585M Key Features

• Hand specific tool holders for efficient layout
• Padded two ply bags hold shape under load
• Industrial nylon with leather holders and reinforced corners
• Leather FatLip mouth keeps the bag formed and protected
• Full leather boot for rugged wear
• Left handed version available as 8585LH
• Made in USA

Occidental Leather 8585M Applications

• Carpentry and framing tool organization
• Jobsite fastener and small parts carry
• Daily use for production builders
• General construction tool storage
• Remodeling and trim work setups

Occidental Leather 8585M Installation Overview

1. Lay your current belt flat and measure from buckle end to your most used hole.
2. Select Medium if the mid range near 37 in. matches your measurement.
3. Adjust using the 9 holes to fine tune fit across 4 in. of range each way.
4. Attach bags and hammer holder to preferred positions.
5. Load tools and confirm balance and comfort before use.

Key Features

• Wide 5 in belt for enhanced back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• Heavy-duty buckles and belt loops minimize bag sliding
• 2 in all-leather overbelt; edge-stitched for strength
• Made in the USA

Applications

• Supporting tool bags and pouches on the jobsite
• Use with suspenders via integrated attachment loops
• Comfortable heavy-duty belt for framing, finish, or general carpentry

Installation Overview

1. Put the belt on over typical work clothing where you will wear it.
2. Measure from the buckle to the hole you use; that measurement is your belt size.
3. Select size XL (approx. 45 in belt size) and adjust using the 9-hole range.
4. Attach tool bags to the overbelt and secure through the belt loops.
5. Clip suspenders to the attachment loops if desired and check fit.

Occidental Leather 5135 LG Key Features

• 5 in wide belt for back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy-duty buckles and belt loops minimize bag movement
• Edge-stitched leather construction
• Made in USA

Occidental Leather 5135 LG Applications

• Daily wear with Occidental tool bags and systems
• Added back support for heavy tool loads
• Suspender-compatible setups for long shifts
• Carpentry, framing, electrical, and general construction

Occidental Leather 5135 LG Installation Overview

1. Measure an existing tool belt from buckle tip to your used hole to confirm size.
2. Select Large (41 in mid range) and adjust using the 9-hole range.
3. Attach tool bags to the overbelt and secure using belt loops.
4. Connect suspenders to the attachment loops as needed.
5. Check fit and tighten buckles to prevent sliding.

Occidental Leather B8018DB Key Features

• Most popular OxyLights tool bag
• Integrated tape holder fits up to 35 ft FatMax
• Tool-specific holders plus hammer loop for fast access
• Right-side orientation; not offered in left-hand model
• Durable leather and nylon construction

Occidental Leather B8018DB Applications

• Everyday carry of layout and cutting tools
• Framing and finish tasks requiring fast access to hand tools
• Jobsite organization with right-hand dominant layouts
• Tape, level, and marking tool storage on belt systems

Occidental Leather B8018DB Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into the dedicated holders and main pockets.
4. Place a tape measure in the leather holder; verify secure fit.
5. Check balance and adjust belt for comfortable carry.

Occidental Leather 5135 XL Key Features

• Wide 5 in belt enhances back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy duty buckles and belt loops minimize bag sliding
• Edge stitched leather construction
• Made in USA

Occidental Leather 5135 XL Applications

• Supporting tool bags for carpentry and construction
• Improving lower back support during long work days
• Use with suspenders for added load distribution
• Jobsite wear requiring durable leather work belts

Occidental Leather 5135 XL Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole.
2. Select the size closest to that mid-range measurement.
3. Put the belt on over normal work clothes and adjust to comfort.
4. Attach suspenders to the built-in loops if desired.
5. Secure tool bags to the overbelt and verify they do not slide.

Occidental Leather 5064 Key Features

• Beltless design integrates with Stronghold Beltless System
• 3-pouch layout with dual outer bags for organization
• Right-side orientation for quick access to frequently used tools
• 10 pockets and holders for hand tools and layout gear
• Premium leather construction; made in the USA

Occidental Leather 5064 Applications

• Right-side carry for hammers, knives, chisels, and pencils
• Beltless setups using Stronghold hubs and suspenders
• Carpentry, framing, trim, and general construction tasks

Occidental Leather 5064 Installation Overview

1. Attach the bag to your Stronghold Beltless System hubs or suspenders.
2. Position on the right side for preferred access.
3. Load tools into the main and dual outer pouches for balance.
4. Confirm rings and connectors are fully seated before use.