Clip-On Tool Holders & Accessories

Occidental Leather 2003 Key Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, or diagonal cutter plus one pencil
• Compact, lightweight, jobsite-ready build
• Fits most Occidental Leather bags and many other tool bags

Occidental Leather 2003 Applications

• Safe storage of sharp hand tools on tool belts or bags
• Protecting clothing and pouches from blade damage
• Keeping chisels and cutters accessible while preventing injury
• Organizing a pencil alongside a primary cutting tool

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it onto a tool bag edge or pocket.
2. Insert the chosen tool into the main compartment until fully seated.
3. Place one round pencil into the integrated slot if desired.
4. Confirm the clip is secure and the tool is retained before use.

Occidental Leather 5523 Key Features

• 4-in-1 capacity for tape, pencil, crayon/screwdriver, and sharp tools
• Includes Oxy Tool Shield for chisels, knives, or cutters
• Extra heavy-duty steel clip fits belts up to 2" wide
• Sturdy American leather construction for long-term durability
• Clip-on design for quick attachment and removal
• Made in the USA

Occidental Leather 5523 Applications

• Carry and access a tape measure on the job
• Keep pencils and lumber crayons within easy reach
• Holster a screwdriver or similar hand tool
• Safely store sharp tools using the included shield
• Clip to work belts for carpentry, framing, or finish work

Occidental Leather 5523 Installation Overview

1. Attach the steel clip to a belt up to 2" wide.
2. Insert tape measure into the main pocket.
3. Place pencil and crayon/screwdriver in side holders.
4. Mount sharp tools in the Oxy Tool Shield.
5. Confirm secure fit before use.

Occidental Leather 5046 Key Features

• Clip-on design installs without removing your belt
• Proprietary extra-long, wide steel clip resists accidental release
• High-mount position reduces swing and improves mobility
• Heirloom-quality leather withstands tough jobsite conditions
• Made in the USA

Occidental Leather 5046 Applications

• Securely carry a tape measure on tool belts up to 2″ wide
• Framing and carpentry measuring tasks
• General construction and remodeling
• Jobsite mobility with quick tape access

Occidental Leather 5046 Installation Overview

1. Position the clip over your belt (fits up to 2″ wide).
2. Slide the holster down until the clip locks onto the belt.
3. Insert the tape measure into the leather holster.
4. Confirm secure engagement and comfortable placement.

Occidental Leather 5040 Features

• Clip-on design enables quick on/off installation anywhere
• Full-grain leather backing with high-strength steel loop
• Heavy-duty 2.5 inch loop accommodates most standard hammers
• Spring steel clip fits belts up to 2" wide
• Made in the USA

Occidental Leather 5040 Applications

• Hands-free hammer carry on tool belts
• Quick add-on holder for ladders, overhead, or mobile tasks
• Temporary or supplemental hammer storage without removing belt
• Jobsite use for pros and serious DIYers

Occidental Leather 5040 Installation Overview

1. Slide the spring steel clip over a belt up to 2" wide.
2. Position the holder at your preferred carry point.
3. Seat the hammer in the steel loop and check balance.
4. Confirm a secure fit before working.

Occidental Leather 9501 Features

• Cost-efficient fastener management
• Single clip-on design for fast application changes
• Keeps multiple pouches preloaded and organized
• Adds fastener storage or sub-divides larger bags
• Secure steel clip mounts to belts up to 2" wide; can clip to toolboxes or bags
• Compact and lightweight for tight setups
• Made in USA

Occidental Leather 9501 Applications

• Expand fastener storage on existing tool belts
• Organize task-specific screws, nails, and small parts
• Sub-divide main tool bags for better part separation
• Clip to toolbox or truck interior for on-the-go organization

Occidental Leather 9501 Installation Overview

1. Verify the mounting surface (belt up to 2" wide, toolbox edge, or bag rim).
2. Position the steel clip over the edge or belt.
3. Press down until the clip fully engages and the pouch is secure.
4. Load fasteners and confirm balanced, accessible placement.

Occidental Leather 5137 Key Features

• Belt-worn, high-mount design for improved mobility
• Sized for 35' FatMax tape measures
• Premium, durable leather construction
• Fits belts up to 3″ wide
• Handcrafted in the USA

Occidental Leather 5137 Applications

• Secure tape measure carry for framing & carpentry
• General construction measuring tasks
• Jobsite mobility where quick access is essential
• Tool belt organization for professional trades

Occidental Leather 5137 Installation Overview

1. Slide the holster onto a work belt up to 3″ wide.
2. Position high on the belt for comfortable reach.
3. Insert your 35' FatMax tape into the pocket.
4. Confirm secure fit before use.

Occidental Leather 5328 Features

• 10 oz Latigo belting leather for durability
• Heavy-duty spring steel belt clip for secure attachment
• Italian-style drop clasp for protected, quick access
• Fits iPhone 6 Plus, 7 Plus & similarly sized phones (verify dimensions)
• Clips to belts up to 2" wide
• Made in the USA

Occidental Leather 5328 Applications

• Hands-free phone carry on work belts
• Protection for larger smartphones on jobsites
• Daily use for tradespeople, contractors, and field techs

Occidental Leather 5328 Installation Overview

1. Clip the holster onto a belt up to 2" wide.
2. Insert phone into the pouch.
3. Close and secure the drop clasp.
4. Verify the clip is firmly attached before use.

Occidental Leather 5026 Features

• Versatile clip-on attachment point for tape measures, clip-on bags, and meter cases
• Fits work belts up to 3" wide
• Accepts clips up to 1" wide
• Premium leather strap with rivet reinforcement
• Rectangular metal loop hardware for secure clipping
• Lightweight, low-profile design (approx. 0.1 lb)
• Made in USA

Occidental Leather 5026 Applications

• Add a clip-on anchor point to a compatible work belt
• Keep tape measures and small tools within easy reach
• Hang clip-on pouches or meter cases to expand storage
• Organize frequently used accessories at your side

Occidental Leather 5026 Installation Overview

1. Slide the loop onto a work belt up to 3" wide.
2. Position it on the belt where access is most convenient.
3. Clip your accessory to the rectangular metal loop.
4. Confirm the accessory’s clip is 1" wide or less.
5. Test the attachment for a secure hold before use.

Occidental Leather 9504 Features

• Cost-efficient fastener and tool management
• Versatile multi-pouch layout with holders for pencils, utility knife, and angle square
• Quick clip-on attachment to belts or waistbands up to 2" wide
• Lightweight, jobsite-tough nylon construction
• Made in the USA

Occidental Leather 9504 Applications

• Small tasks and punch-list work
• Trim and finish carpentry essentials
• Maintenance and repair duties
• Weekend DIY projects
• Service calls where minimal tools are needed

Occidental Leather 9504 Installation Overview

1. Attach: Clip the pouch to a belt or waistband up to 2" wide.
2. Load: Place fasteners and small tools into the main and outer bags.
3. Organize: Use dedicated holders for pencil, utility knife, and angle square.
4. Check: Ensure the clip is fully seated and the pouch is secure before use.
5. Remove: Unclip when finished and store in a dry place.

Occidental Leather 9502 Features

• Double clip-on design adds fastener capacity and subdivides existing bags
• Leather clip-on patch ideal for phone, notebook, or small tools
• Clips securely to belts up to 2″ or to toolboxes
• Industrial nylon construction for lightweight durability
• Made in the USA

Occidental Leather 9502 Applications

• Add-on fastener storage for existing tool belts
• Organize small tools & hardware on the job
• Sub-divide main bags for better workflow
• Preload and clip to toolbox or truck for quick access
• Use on work belts up to 2″ wide

Occidental Leather 9502 Installation Overview

1. Position pouch clip on a work belt up to 2″ wide or on a toolbox edge.
2. Secure the clip fully and check for a tight hold.
3. Load fasteners or small tools into the main and outer bags.
4. Optionally use it to sub-divide items in your primary bags.
5. Remove and store when not in use.

Occidental Leather 5010 Features

• 1″ wide full-grain leather loop with safety release snap
• Quick access for saw keys, hex wrenches, tag tools, and more
• Slides onto most standard work belts
• Durable leather construction with metal snap hardware
• Lightweight, low-profile accessory — Made in USA

Occidental Leather 5010 Applications

• Quick-access storage for small hand tools
• Organizing keys and tag tools on a work belt
• Adding utility to tool belts, vests, and rigs

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt or rig.
2. Position it where it is most accessible.
3. Clip your tool or key to the safety snap and verify it is secure.

Occidental Leather 6568 Features

• All-leather construction with reinforced stitching for durability
• Secure snap closure keeps devices protected
• Clip-on attachment for quick belt or pocket mounting
• Fits Construction Master models I, II, III, IV and other brands
• Also available as a belt-worn model (5068)

Occidental Leather 6568 Applications

• Carry and protect construction calculators on the jobsite
• Quick access to calculator during layout and measurement tasks
• Hands-free storage while climbing ladders or moving materials

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the flap and snap to secure.
3. Slide the metal clip over your belt or waistband until fully seated.
4. Verify the case is firmly attached before working.

Occidental Leather 8505 Key Features

• Clip-on mount fastens to belt or pocket
• 4 pockets for utility knife, pencils, and 35’ tape
• Lightweight, jobsite-tough design
• Made in the USA

Occidental Leather 8505 Applications

• Keep tape, knife, and pencils within reach while working
• Add-on clip pouch for belts, pockets, or vests
• Organized storage for measuring and marking tasks

Occidental Leather 8505 Installation Overview

1. Attach the clip to your belt or pocket.
2. Load tools into the designated pockets.
3. Verify secure fit and adjust position for comfort.

Occidental Leather 5031 Features

• Belt-worn dee provides a secure snap point for tools and testers
• Fits work belts up to 3″ wide
• 3/4″ dee ring sized for common spring snaps
• Leather strap with metal hardware for durability

Occidental Leather 5031 Applications

• Attaching telephone butt-sets and testers
• Securing small tools with spring snaps
• Adding an auxiliary connection point to a work belt

Occidental Leather 5031 Installation Overview

1. Slide the leather loop onto a work belt up to 3″ wide.
2. Position at the desired location on the belt.
3. Attach your tool’s spring snap or lanyard to the 3/4″ dee ring.
4. Verify the snap is fully engaged before use.

Occidental Leather 1550 Features

• 7 pockets & tool holders for organized storage
• Clip-on gear pockets for quick modular access
• Integrated glasses holder and a secure-closure pouch
• Lightweight design — only .83 lbs
• Made in the USA

Occidental Leather 1550 Applications

• Hands-free tool carry for carpentry, electrical, and general trades
• Organized access to small tools, fasteners, and accessories
• Belt-free setup for mobility on jobsites and in workshops

Occidental Leather 1550 Installation Overview

1. Wear the Insta-Vest and adjust straps for a secure, comfortable fit.
2. Attach clip-on gear pockets to the suspenders/vest positions as desired.
3. Load tools and accessories evenly across pockets and holders.
4. Secure flaps/closures and confirm clear range of motion before use.

Occidental Leather 8574 Features

• Velcro® closure for quick, secure access
• Expandable elastic sides — up to 1-1/2” of flex
• 2” spring steel belt clip for firm attachment
• Handcrafted full-grain leather construction
• Made in the USA

Occidental Leather 8574 Applications

• Daily carry on belt or waistband
• Jobsite phone protection and quick access
• Secure storage for compact smartphones
• Walking, commuting, and on-the-go use

Occidental Leather 8574 Installation Overview

1. Slide or clip the 2” steel clip onto belt/waistband.
2. Place phone into the pocket.
3. Close the flap and press the Velcro® to secure.
4. Confirm a snug fit before use.

Occidental Leather 8578 Key Features

• Clip-on mount with spring steel clip for chest attachment to Stronghold suspenders
• Padded smartphone sleeve with velcro flap for secure carry
• Organizers for pencils, notepad, and driver bits
• Seven total pockets/tool holders
• Easy to install and remove
• Made in the USA

Occidental Leather 8578 Applications

• Chest-mounted storage on Stronghold suspenders
• Quick access to phone, pencils, notepad, and driver bits
• Staying organized while climbing ladders or moving on the jobsite
• Lightweight carry for everyday trade essentials

Occidental Leather 8578 Installation Overview

1. Position the spring steel clip over the chest strap of Stronghold suspenders.
2. Press to fully seat the clip until the pocket is secure.
3. Load tools, phone, and accessories into the designated sleeves.
4. Close the phone flap and check retention before use.
5. Remove by lifting the clip when you need to reposition or store.

Occidental Leather 9511 Features

• Cost-efficient fastener management
• Single clip-on design enables quick swaps between tasks
• Deeper, narrower profile than model 9501 for added capacity with a compact footprint
• Heavy-duty clip secures to belts up to 2" wide; also clips to toolboxes or truck interiors
• Quick-access storage for nails, screws, and small fasteners
• Made in the USA

Occidental Leather 9511 Applications

• Carry and organize nails, screws, and small hardware
• Create modular, swap-in/out fastener setups by task
• Clip-on storage for belts, toolboxes, or vehicle interiors
• General carpentry, framing, finish work, and DIY projects

Occidental Leather 9511 Installation Overview

1. Attach the pouch clip to a work belt up to 2" wide or a secure edge on a toolbox/truck panel.
2. Load with fasteners and ensure the pouch is seated and balanced.
3. Verify the clip is fully engaged before use.

Key Features

• Optional strap for Journeyman’s Tote and compatible carry bags
• Hand crafted from durable bridle leather
• Adjustable shoulder pad for added comfort
• High–quality nickel–plated swivel steel clips for easy on/off
• 1″ wide strap adjusts 45″ – 57.5″
• Detaches in seconds for storage in your gear
• Made in the USA

Applications

• Shoulder carry upgrade for totes and tool bags
• Travel and everyday carry where a durable strap is needed
• Replacement strap for compatible Occidental Leather bags

Installation Overview

1. Attach each swivel clip to the bag’s D–rings or strap anchors.
2. Adjust the strap length between 45″ and 57.5″ to fit.
3. Position the shoulder pad for comfort on the carry point.
4. Verify clips are fully closed and secure before use.
5. Detach clips to remove and store the strap when not in use.

Occidental Leather 8570 Features

• Fits most standard cell phones and gadgets
• Heavy-duty elastic side panels provide a snug, flexible fit
• Velcro® closure keeps device secure
• 2″ spring steel clip attaches to belts or waistbands

Occidental Leather 8570 Applications

• Everyday belt carry for phones on the jobsite
• Hands-free phone access while working
• Secure storage to prevent drops or loss
• Quick clip-on use with work belts or waistbands

Occidental Leather 8570 Installation Overview

1. Slide the 2″ spring steel clip over your belt or waistband.
2. Insert phone into the holster; elastic sides will expand to grip.
3. Close the Velcro® flap to secure the device.
4. Ensure the clip is fully seated and the flap is fastened before use.