Occidental Leather Nail & Fastener Bags

Occidental Leather 8581 Key Features

• FatLip leather mouth keeps the bag formed, open, and protected from abrasion
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated sleeves and pouches for tri-square, cat's paw, nail sets, and driver bits
• Accepts belts up to 3 in wide
• Made in the USA

Occidental Leather 8581 Applications

• Carrying nails, screws, and common fasteners
• Organization for angle square, tri-square, and layout tools
• Holstering cat's paw and driver bits for framing and drywall tasks
• General construction use on the non-dominant side

Occidental Leather 8581 Installation Overview

1. Slide the bag onto a work belt up to 3 in wide.
2. Wear on the left side for right-handed setups.
3. Load fasteners and tools into main and outer compartments.
4. Seat the angle square in the built-in holster and secure small bits in dedicated pouches.
5. Verify comfortable position and accessibility before work.

Occidental Leather 5062 Features

• 4 pouch layout for compact, expanded capacity
• 10 pockets and tool holders for fasteners and layout gear
• Tool-specific slots for blade square, angle square, driver bits, and cat's paw
• Full-grain leather construction for long-term durability
• Worn on the non-dominant side; available as left-hand 5062LH
• Made in the USA

Occidental Leather 5062 Applications

• Framing and general carpentry tool and fastener carry
• Organizing layout tools like blade and angle squares
• Quick access to driver bits, nail sets, and cat's paw
• Left-side fastener storage for right-handed users

Occidental Leather 5062 Installation Overview

1. Slide the pouch onto a 3 in belt or compatible work belt.
2. Position on the left side for right-handed use or select 5062LH for left-handed layout.
3. Load fasteners and tools into the four stacked compartments.
4. Place blade square and angle square in designated holders; store bits and cat's paw in slots.
5. Confirm secure fit and balanced carry before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 8062 Features

• 4 pouch layout with main, middle, outer, and upper bags
• 10 total pockets and tool holders
• Dedicated holders for blade square, angle square, cat's paw, and driver bits
• Streamlined profile for compact, efficient storage
• Designed to be worn on the left side for right handed users; left handed option available
• Made in USA

Occidental Leather 8062 Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry where compact, organized storage is preferred
• Keeping squares, bits, and cat's paw readily accessible on the non dominant side

Occidental Leather 5061 Key Features

• All leather construction built for daily jobsite durability
• Top tape pocket for quick access
• Nine total pockets and holders for fasteners and layout tools
• Two lower bags to sort small tools and nails
• Tool slots for angle square, cat's paw, driver bits, and more
• Available in right- or left-hand setups
• Made in the USA

Occidental Leather 5061 Applications

• Framing and general carpentry layouts
• Finish work where organized fastener access is needed
• Jobsite fastener and small tool organization on a tool belt

Occidental Leather 5061 Specifications

Occidental Leather 9520 Key Features

• Compact 2 in 1 design adds fastener capacity without extra bulk
• Round bottom nylon pouches hold shape and resist collapse
• Speed square slot for inside or outside carry
• Includes Oxy Tool Shield for sharp tool protection
• 11 total pockets and tool holders
• Available in right or left hand layouts
• Made in USA

Occidental Leather 9520 Applications

• Trim carpentry and finish installations
• General framing and layout tasks
• Organizing fasteners, bits, and small tools
• Speed square carry and quick measurement access

Occidental Leather 9520 Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Choose left or right hand layout to match your setup.
3. Place fasteners in the main and outer bags; organize small tools in holders.
4. Insert sharp tools into the Oxy Tool Shield.
5. Seat the speed square in the dedicated slot for quick access.

Occidental Leather 8583 Key Features

• FatLip leather mouth keeps the bag open and protected
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Tri-square sleeve, cat's paw loop, and external pouches for nail sets or driver bits
• Designed as the left-side fastener bag for right-handed setups; left-handed version available as 8583LH
• Made in USA

Occidental Leather 8583 Applications

• Framing and structural carpentry fastener storage
• Drywall and general construction small tool organization
• Quick-access holster for angle squares on the jobsite
• Left-side carry for right-handed belt systems

Occidental Leather 8583 Specifications

Occidental Leather 5525 Key Features

• Round-bottom design increases internal volume and stability
• 10 pockets and holders optimized for fasteners and layout tools
• Tape pocket fits tapes up to 35 ft
• Includes Oxy Tool Shield to protect sharp tools, bags, and body
• Right-hand layout; worn on the left side
• Premium leather construction; Made in the USA

Occidental Leather 5525 Applications

• Fastener storage for framing and carpentry tasks
• Organizing layout tools like squares and bits
• Measuring and marking with quick tape access
• Daily jobsite carry on a work belt

Occidental Leather 5525 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed use.
3. Insert the Oxy Tool Shield into the designated holder.
4. Load fasteners and tools into the appropriate pockets.
5. Confirm secure fit and balance before use.

Occidental Leather 8060 Features

• 3-pouch layout for fasteners and small tools
• Tool-specific holders for blade square, angle square, cat's paw, and bits
• Lightweight OxyLights construction with leather reinforcements
• Optimized for framing and general carpentry
• Made in USA

Occidental Leather 8060 Applications

• Framing: Keep nails, layout square, and bits at hand
• General Carpentry: Organized storage for everyday fasteners
• Layout Work: Dedicated blade square and angle square holders
• Punch list tasks: Compact carry of small tools and hardware

Occidental Leather 8060 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed setups or per preference.
3. Load fasteners and layout tools into the main, outer, and upper pouches.
4. Use dedicated holders for blade square, angle square, bits, and cat's paw.
5. Check balance and retention before starting work.

Occidental Leather 6101 Features

• Trim-ready compact leather design for finish work
• Tool-specific holders for nail sets, blade square, and cat's paw
• Streamlined layout reduces bulk and keeps tools organized
• No angle square holster
• Made in USA
• Left-hand version available as 6101LH

Occidental Leather 6101 Applications

• Trim and finish carpentry
• Light framing tasks
• Interior remodel and punch list work
• Organizing fasteners and layout tools on the left side

Occidental Leather 6101 Installation Overview

1. Attach the bag securely to your work belt.
2. Load fasteners and layout tools into dedicated pockets.
3. Wear on the left side for easy left-hand access.

Occidental Leather 5564 Key Features

• All leather main bag with divided nylon double outer pouch
• Six black leather tool holders; four pouches total
• Optimized for wire nuts, couplers, and small fasteners
• Left side wear for fast access with the left hand
• Full grain leather and industrial nylon construction

Occidental Leather 5564 Applications

• Organizing and carrying fasteners and small parts
• Keeping layout and marking tools at hand
• Electrical and mechanical fittings storage
• Daily jobsite use with hybrid leather and nylon durability

Occidental Leather 5564 Installation Overview

1. Slide the belt loop over your work belt.
2. Position on the left side for non dominant hand access.
3. Distribute tools and fasteners among the divided pouches.
4. Secure frequently used layout tools in the leather holders.

Occidental Leather B5611 Features

• All leather construction with classic black finish
• Integrated Oxy Tool Shield for sharp tools
• Upper bag with sleeve pockets and drill bit holsters
• Side by side 35 ft tape holster and angle square holster
• Reinforced back wall at stress points
• Pockets & tool holders: 10
• Available left-hand version: B5611LH

Occidental Leather B5611 Applications

• Fastener and small tool organization for framing and carpentry
• Quick access to tape, angle square, and drill bits
• Left-side wear for tools commonly accessed with the left hand

Occidental Leather B8064 Features

• Patented 2-in-1 outer pouch with angle square holster
• Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
• Four-bag layout for layered storage
• Holds fasteners and tools commonly accessed with the left hand
• Made in USA

Occidental Leather B8064 Applications

• Framing: Keep nails, square, and layout tools organized
• General carpentry: Quick access to bits, nail sets, and cat's paw
• Layout work: Integrated angle square holster for fast measurement
• Jobsite organization: Layered pouches separate fasteners and small tools

Occidental Leather B8064 Installation Overview

1. Select right- or left-handed variant to match your setup.
2. Slide the bag onto a compatible work belt and secure.
3. Position fastener bag on the left side for right-handed users; right side for left-handed users.
4. Load fasteners and layout tools into the designated sleeves and pouches.
5. Verify comfortable reach and adjust placement as needed.

Occidental Leather B8064LH Key Features

• Patented 2-in-1 outer pouch with built-in angle square holster
• Four-bag layout: main, outer, upper, and 2-in-1 pouch
• Dedicated holders for tri-square, cat's paw, nail sets, and driver bits
• Left-handed configuration; worn on right side
• Industrial nylon with leather reinforcements; Made in USA

Occidental Leather B8064LH Applications

• Framing and general carpentry fastener storage
• Organizing layout tools such as angle and tri-squares
• Jobsite carry for nail sets, driver bits, and pry tools
• Left-handed belt setups worn on the right hip

Occidental Leather B8064LH Installation Overview

1. Orient the pouch for right-side wear for left-handed users.
2. Thread onto your work belt and position for comfortable reach.
3. Secure adjacent holders as needed and load tools by category.
4. Confirm clear access to the 2-in-1 outer pouch and square holster.

Occidental Leather B5080DBLH M Key Features

• Premium top grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand specific tool layout for efficient workflow
• Copper rivets reinforce stress points
• Function driven design for professional framers

Occidental Leather B5080DBLH M Applications

• Framing and rough carpentry
• General jobsite tool and fastener carry
• Remodeling and construction tasks
• Layout work with tape and square holsters
• Left handed workflow setups

Occidental Leather B5080DBLH M Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to determine belt size.
2. Select Medium if your midpoint measurement is about 37 in.
3. Attach tool and fastener bags to the belt with tool bag on the left and fastener bag on the right for left handed use.
4. Secure hammer holder and adjust belt to a comfortable fit.
5. Load tools and verify access and balance.

Occidental Leather 8564 Key Features

• 9 pockets and tool holders for fasteners and small tools
• Patented 2-in-1 outer bag with angle square holster; 3 bags total
• Durable nylon body with OxyRed leather-reinforced corners
• Clip-on design fits the 2535 Builders Vest
• Made in USA

Occidental Leather 8564 Applications

• Organizing nails, screws, and driver bits
• Carrying angle and tri-squares
• Stowing a cats paw or similar pry tool
• Left-side fastener access on Builders Vest systems

Occidental Leather 8564 Installation Overview

1. Align the clip-on tabs with the attachment points on the 2535 Builders Vest.
2. Securely clip the pouch to the vest until it locks in place.
3. Verify the pouch is seated and does not shift.
4. Load tools and fasteners; place frequently used items for left-hand access.

Occidental Leather B5060LH Key Features

• Left-handed layout worn on the right side for quick access
• Three stacked pouches with top-access tier
• 9 pockets and tool holders for common layout tools
• Premium leather construction for long-term durability
• Made in the USA

Occidental Leather B5060LH Applications

• Framing and rough carpentry fastener storage
• General carpentry and remodel tasks
• Organizing layout squares, bits, and small tools

Occidental Leather B5060LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side to suit left-handed setups.
3. Load fasteners and layout tools into the designated pockets.
4. Check balance and adjust position for comfort.

Occidental Leather B8060 Features

• Lightweight OxyLights construction for comfort
• 3 pouch layout for main, outer, and upper storage
• 9 pockets and holders for efficient organization
• Dedicated holders for blade square, angle square, cat paw, driver bits
• Made in USA

Occidental Leather B8060 Applications

• Framing tasks requiring fastener and layout tool access
• General carpentry tool and fastener organization
• Left-side fastener bag use for right-handed setups

Occidental Leather B8060 Installation Overview

1. Attach the pouch to a compatible work belt through the top slot.
2. Load fasteners and layout tools into designated pockets and holders.
3. Position on the left side for right-handed users or per preference.

Occidental Leather 5061LH Key Features

• Left handed layout with tape holster positioned on the left; worn on the right side
• All-leather construction for daily jobsite durability
• 9 total pockets and holders for fasteners and layout tools
• Dedicated slots for angle square, cat's paw, driver bits, and more
• Made in the USA

Occidental Leather 5061LH Applications

• Framing and rough carpentry setups
• Finish carpentry and trim work
• General construction and remodeling

Occidental Leather 5061LH Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Wear on the right side for left handed setups.
3. Load fasteners and tools into the main, outer, and small holders.
4. Position tape in the upper tape pocket for quick access.
5. Adjust placement on the belt for comfort and reach.

Occidental Leather B5018DB Key Features

• Right-side layout for tools most accessed with the right hand
• Integrated tape holster fits up to 35 ft tape
• Double outer bags for added organization
• Durable all-leather construction with reinforced stitching
• Made in the USA

Occidental Leather B5018DB Applications

• Daily carry of carpentry and framing hand tools
• Finish and trim work tool organization
• General construction and remodeling
• Measuring and layout tasks on site

Occidental Leather B5018DB Installation Overview

1. Slide the pouch onto your work belt.
2. Position on the right side for dominant-hand access.
3. Load tools into main and outer pockets; place tape in the holster.
4. Adjust belt for comfort and secure fit before use.

Occidental Leather 5530 XXL Key Features

• Round bottom full capacity bags for added space and durability
• NoSpill hand specific tool holder layout
• Premium top grain leather throughout
• 3 inch heavy duty English bridle leather belt with steel roller buckle
• Purpose built for framing, trim, and general carpentry
• Made in the USA

Occidental Leather 5530 XXL Applications

• Framing tasks requiring high capacity tool storage
• Trim work and finish carpentry organization
• General carpentry and remodeling
• Jobsite tool protection and quick access
• Daily professional use in demanding conditions

Occidental Leather 5530 XXL Installation Overview

1. Select correct belt size and position belt at working height.
2. Attach Big Oxy tool and fastener bags to the belt loops.
3. Clip on the Oxy Tool Shield and mount the 2 in 1 Tool and Hammer Holder.
4. Load tools into hand specific holders and adjust belt for comfort.
5. Verify secure fit and balance before use.

Occidental Leather 5530 XXXL Key Features

• Round bottom full capacity bags for added space and durability
• NoSpill hand specific tool holder system
• Premium top grain leather construction
• 3 in heavy duty work belt made of 12 oz English bridle leather with steel roller buckle
• Function engineered for framing, trim, and general carpentry

Occidental Leather 5530 XXXL Applications

• Framing and rough carpentry setups
• Trim and finish carpentry tool organization
• General construction and remodeling
• Jobsite tool carry and protection

Occidental Leather 5530 XXXL Installation Overview

1. Measure where you wear the belt to confirm size.
2. Attach the fastener and tool bags to the belt in preferred positions.
3. Clip on the 2-in-1 tool and hammer holder to the belt center or side.
4. Load tools and adjust belt for comfort and balance.
5. Check all rivets, clips, and holders before use.

Occidental Leather 8583LH Features

• 10 inch deep main bag with full leather boot
• Leather FatLip mouth keeps bag formed, open, and abrasion resistant
• Patented 2 in 1 outer bag with built in angle square holster
• Tri square sleeve, cats paw loop, and external pouches for nail sets or driver bits
• Left handed layout worn on the right side
• Made in USA

Occidental Leather 8583LH Applications

• Framing and carpentry fastener organization
• Drywall installation tool and bit storage
• General construction fastener and small tool management

Occidental Leather 8583LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into designated pockets.
4. Confirm the FatLip mouth and compartments are clear for access.

Occidental Leather 8060LH Features

• 9 pockets and tool holders for organized storage
• Industrial nylon body with leather trim for durability
• Left handed layout, worn on right side
• Dedicated holders for blade square, angle square, cat's paw, driver bits
• Made in the USA

Occidental Leather 8060LH Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry tool and fastener organization
• Left handed setups worn on the right side of the belt

Occidental Leather 8060LH Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into the designated pockets and holders.
4. Check access and balance before starting work.