Occidental Leather Left-Handed Tool Belts

Occidental Leather 5061 Key Features

• All leather construction built for daily jobsite durability
• Top tape pocket for quick access
• Nine total pockets and holders for fasteners and layout tools
• Two lower bags to sort small tools and nails
• Tool slots for angle square, cat's paw, driver bits, and more
• Available in right- or left-hand setups
• Made in the USA

Occidental Leather 5061 Applications

• Framing and general carpentry layouts
• Finish work where organized fastener access is needed
• Jobsite fastener and small tool organization on a tool belt

Occidental Leather 5061 Specifications

Occidental Leather 8060 Features

• 3-pouch layout for fasteners and small tools
• Tool-specific holders for blade square, angle square, cat's paw, and bits
• Lightweight OxyLights construction with leather reinforcements
• Optimized for framing and general carpentry
• Made in USA

Occidental Leather 8060 Applications

• Framing: Keep nails, layout square, and bits at hand
• General Carpentry: Organized storage for everyday fasteners
• Layout Work: Dedicated blade square and angle square holders
• Punch list tasks: Compact carry of small tools and hardware

Occidental Leather 8060 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed setups or per preference.
3. Load fasteners and layout tools into the main, outer, and upper pouches.
4. Use dedicated holders for blade square, angle square, bits, and cat's paw.
5. Check balance and retention before starting work.

Occidental Leather 9855LH Features

• Adjust-to-Fit belt for pant waist 32 in to 41 in
• D rings pre installed for suspenders
• FatLip bag design with structured mouth
• Hand specific tool holders for improved rhythm
• Rear 2 in 1 tool and hammer holder; includes Oxy Tool Shield
• Made in USA

Occidental Leather 9855LH Applications

• Production carpentry tool carry and organization
• Framing and layout work
• General jobsite fastening and measuring tasks
• Use with suspension systems for extended wear

Occidental Leather 9855LH Installation Overview

1. Measure and adjust belt to fit within 32 in to 41 in range.
2. Position tool and fastener bags for left handed layout.
3. Attach hammer holder and accessories to belt loops.
4. Load tools and fasteners; confirm balanced carry.
5. Optionally connect suspenders to pre installed D rings.

Occidental Leather B5018DBLH Features

• 11 pockets and tool holders for common carpentry tools
• Main bag 9 x 8; outer bags 5 x 5.5 for organized access
• Integrated tape holster fits tapes up to 35 ft
• Premium black leather construction; left hand model
• Made in the USA

Occidental Leather B5018DBLH Applications

• Carry and organize chisels, knives, pencils and markers
• Secure holster for 35 ft tape measures
• Hold torpedo level and hammer for framing and finish work
• Left-side wear for left-hand tool access

Occidental Leather B5018DBLH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the left side for left-hand access.
3. Load tools into designated pockets and holders.
4. Place tape measure in the built-in holster.
5. Verify balance and adjust belt for comfort.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather 9525LHM Key Features

• 25 pockets and tool holders
• Innovative round-bottom, full-capacity tool bags
• Includes 2003 Oxy Tool Shield in each bag
• Hand-specific tool holder layout for left-handed users
• Engineered for trim, finish, and light framing tasks
• 12 oz belting leather with steel roller buckle and padded nylon 3 inch work belt

Occidental Leather 9525LHM Applications

• Trim carpentry and punch list work
• Finish carpentry and cabinet install
• Light framing and layout
• General tool organization on the jobsite

Occidental Leather 9525LHM Installation Overview

1. Measure an existing belt you wear over work clothes to find belt size.
2. Buckle the belt on your waist where it will be worn and note the hole used.
3. Measure from the buckle to that hole; select the belt size that matches.
4. Position tool and fastener bags for a left-handed layout; secure holders.
5. Load tools and check balance and fit; adjust for comfort.

Occidental Leather B8017DBLH Key Features

• Left handed layout worn on the left side for quick access
• Holders for pencils, work knife, chisel, level, and lumber crayon
• Heavy duty hammer loop for secure carry
• OxyRed leather reinforced corners and internal holders for durability
• Lightweight OxyLights hybrid nylon and leather construction
• Three pouch design for compact organization
• Made in USA

Occidental Leather B8017DBLH Applications

• Organizing everyday carpenter and framer hand tools
• Left side carry on work belts and belt systems
• Keeping pencils, knives, chisels, and levels at the ready
• Jobsite use where lightweight yet durable storage is needed
• General construction and finishing tasks

Occidental Leather B8017DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the belt and adjust placement for comfort.
4. Load tools into dedicated holders and pouches.
5. Confirm hammer loop and tools are seated securely before use.

Occidental Leather 2580LH Features

• Wide padded shoulder support lined with Dri Lex for moisture management
• Fully adjustable straps for a comfortable fit on most builders
• Balanced load carry to reduce strain and lower back fatigue
• 36 pockets and holders keep essential tools accessible
• Quick release chest buckle and heavy duty D ring for hanging storage

Occidental Leather 2580LH Applications

• Framing tasks needing high capacity tool access
• Electrical work with balanced weight distribution
• Concrete forming and layout
• Trim and finish work in tight spaces

Occidental Leather 2580LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure, comfortable fit.
2. Attach B8064LH and B8017LH bags to the 3 in leather belting.
3. Ensure tunnel loop attachments are seated; tighten as needed.
4. Load tools into the 36 pockets and holders to balance weight.
5. Use the D ring for hanging storage when removing the vest.

Occidental Leather 9521LH Key Features

• Compact finisher layout ideal for trim, light framing and finish work
• Round bottom, full capacity main and outer bags with two ply foam core retain shape
• Clip on leather tab for tape; driver bit and nail set pouches included
• Metal hammer holder
• Left handed configuration worn on left side for fast tool access

Occidental Leather 9521LH Applications

• Trim carpentry organization
• Light framing tool carry
• Finish carpentry and punch list work

Occidental Leather 9521LH Installation Overview

1. Position on your work belt at the left hip for left handed access.
2. Secure the bag onto the belt and load tools into the dedicated pockets.
3. Attach the included Oxy Tool Shield where needed for sharp tool protection.

Key Features

• Popular 3 pouch pro layout without a tape pocket
• Double outer bags for added capacity and organization
• Tool holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Left handed configuration; worn on the left side
• Made in the USA

Applications

• Carpentry and framing tool organization
• General construction and remodeling
• Finish work tool carry
• Jobsite hand tool access and storage

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders and pouches.
4. Check balance and tighten belt for a secure fit.

Occidental Leather 2500LH Key Features

• Wide padded shoulder support lined with Dri-Lex for comfort
• Fully adjustable straps for freedom of movement
• Even weight distribution across the body
• 17 pockets and holders keep tools accessible
• Quick-release chest strap buckle; rear D ring for hanging
• Left-handed layout

Occidental Leather 2500LH Applications

• Framing and general carpentry
• Electrical installation and service work
• Concrete forming and finishing tasks
• Trim and finish carpentry
• Jobsite tool organization without a traditional belt

Occidental Leather 2500LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure fit.
2. Load essential tools into the built-in pockets and holders.
3. Attach compatible tool bags to the leather belting as needed.
4. Balance load between sides for even weight distribution.
5. Use rear D ring to hang the vest when storing.

Occidental Leather 5080DBLH LG Key Features

• Left handed, hand specific layout
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Built in tape holster for tapes up to 30 ft
• Pockets and tool holders: 21
• Made in USA

Occidental Leather 5080DBLH LG Applications

• Framing and rough carpentry
• General construction tool carry
• Remodeling and jobsite setup
• Efficient organization of tools and fasteners
• Left handed trades needing balanced access

Occidental Leather 5080DBLH LG Installation Overview

1. Measure your current tool belt from buckle end to the used hole to determine belt size.
2. Select size to match the midpoint measurement for proper adjustment.
3. Position tool bag on dominant left side and fastener bag on right.
4. Secure the belt using the steel roller buckle and adjust for comfort.
5. Load tools and tapes into the hand specific holders and verify balanced carry.

Occidental Leather B8064LH Key Features

• Patented 2-in-1 outer pouch with built-in angle square holster
• Four-bag layout: main, outer, upper, and 2-in-1 pouch
• Dedicated holders for tri-square, cat's paw, nail sets, and driver bits
• Left-handed configuration; worn on right side
• Industrial nylon with leather reinforcements; Made in USA

Occidental Leather B8064LH Applications

• Framing and general carpentry fastener storage
• Organizing layout tools such as angle and tri-squares
• Jobsite carry for nail sets, driver bits, and pry tools
• Left-handed belt setups worn on the right hip

Occidental Leather B8064LH Installation Overview

1. Orient the pouch for right-side wear for left-handed users.
2. Thread onto your work belt and position for comfortable reach.
3. Secure adjacent holders as needed and load tools by category.
4. Confirm clear access to the 2-in-1 outer pouch and square holster.

Occidental Leather 8086LHLG Key Features

• Hand specific tool holders for a left handed layout
• Padded two ply bags maintain shape
• Industrial nylon body for high abrasion resistance
• Leather tool holders with leather reinforced corners
• Seven bag configuration with patented 2-in-1 outer pouch

Occidental Leather 8086LHLG Installation Overview

1. Lay your current belt flat and measure from the buckle end to the most used hole.
2. Select the belt size whose mid range is closest to that measurement.
3. If you do not have a belt, use your approximate mid range waist measurement to choose size.

Occidental Leather 5080LH LG Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout promotes work rhythm
• Made in USA

Occidental Leather 5080LH LG Applications

• Framing and general carpentry
• Fastener and small tool organization on site
• Measuring and layout tasks
• Daily carry for hammers, tapes, and hand tools

Occidental Leather 5080LH LG Installation Overview

1. Put the belt on over work clothes where you normally wear it.
2. Note the hole used to fasten the belt.
3. Measure from the buckle to that hole to determine belt size.
4. Load tools into hand specific holders and adjust fit for comfort.

Occidental Leather 5087LHLG Features

• 21 pockets & tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout for left handed users
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087LHLG Applications

• Framing and rough carpentry
• General construction and remodeling
• Left handed jobsite tool organization
• Efficient fastener and tool access

Occidental Leather 5087LHLG Installation Overview

1. Select correct belt size and thread through pouches and holders.
2. Position tape holder on right and double pouch tool bag on left.
3. Attach hammer holder and adjust locations as preferred.
4. Buckle belt and adjust for a snug, comfortable fit.
5. Load tools and fasteners; verify balanced weight and access.

Occidental Leather 9550LH Features

• Premium top-grain leather bags
• Copper rivets reinforce main bags
• Adjust-to-fit belt allows seasonal clothing changes
• D rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• Removable high mount hammer holder on rear
• Rugged commercial nylon and high-density neoprene padding

Occidental Leather 9550LH Applications

• Framing and general carpentry setups
• Left-handed tool belt organization on the jobsite
• Use with suspension systems via pre-installed D rings

Occidental Leather 9550LH Installation Overview

1. Adjust belt to pant waist size using the crossover system until locked.
2. Position tool and fastener bags on left/right sides per left-handed layout.
3. Attach the high mount hammer holder to rear as desired.
4. Connect suspenders to D rings if using a suspension system.
5. Load tools and verify bags remain fixed without slipping.