Occidental Leather Clip-On Utility Pouches & Cases

Occidental Leather 5328 Key Features

• Made in the USA
• 10 oz Latigo belting leather construction
• Heavy-duty spring steel belt clip
• Italian-style drop clasp
• Clips to belts up to 2 inches wide
• Sized for larger smartphones (iPhone Plus and similar)

Occidental Leather 5328 Applications

• Keep smartphones secure and accessible on the jobsite
• Belt-mounted carry for larger phones
• Protection from bumps, dust, and debris
• Everyday use for trades and field work

Occidental Leather 5328 Installation Overview

1. Attach the holster by clipping it to a belt up to 2 inches wide.
2. Place the phone inside the holster.
3. Close the drop clasp to secure the phone.
4. Check that the clip is fully engaged before use.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 8505 Features

• Clip-on mount attaches to belt or pocket for quick access
• 4 tool pockets sized for knife, pencils, and 35 ft tape
• FatMax compatible tape pocket
• Ultra-lightweight at 0.2 lbs for all-day comfort
• Durable nylon with leather reinforcement; made in USA

Occidental Leather 8505 Applications

• Carry and organize measuring tape, utility knife, and pencils
• Quick tool access on belt or pocket during layout and marking
• Jobsite or shop use where compact organization is needed

Occidental Leather 8505 Installation Overview

1. Clip the holder onto your belt or pocket.
2. Place tape measure, knife, and pencils into designated pockets.
3. Confirm the clip is secure and pockets are seated.
4. Adjust tool placement for comfortable reach.

Occidental Leather 8574 Key Features

• Clip-on leather holster for phones
• Velcro closure to fit many phone sizes
• Heavy duty elastic sides expand up to 1-1/2 in
• 2 in spring steel belt clip for secure attachment
• Made in USA

Occidental Leather 8574 Applications

• Everyday belt carry for standard size smartphones
• Jobsite phone protection with secure closure
• Hands-free access while working or commuting
• Clips to belts or waistbands up to 2 in wide

Occidental Leather 8574 Installation Overview

1. Slide the spring steel clip over your belt or waistband.
2. Place your phone inside the pocket.
3. Close the flap and press the Velcro to secure.
4. Confirm the elastic sides hold the phone snugly.
5. Check access and adjust position as needed.

Occidental Leather 5114K Key Features

• Low profile sleeve keeps tool snug to the body
• DIY install kit with copper rivets and instructions
• Premium leather construction, handcrafted
• Made in the USA

Occidental Leather 5114K Applications

• Framing and structural carpentry carry
• Roofing tasks requiring secure pry bar access
• Finish carpentry and trim work
• Mounting to tool pouches, vests, or belt rigs

Occidental Leather 5114K Installation Overview

1. Gather tools: smooth face hammer, side cutters, 9/32 deep socket, pick, drill with 3/16 bit, and a hard surface.
2. Drill out and remove the two outer rivets on the nondominant side bag.
3. Position sleeve; push a new rivet through the hanger and sleeve holes.
4. Seat washer using a hammer and socket or small pipe.
5. Trim excess rivet length to about 1/8 - 3/16 in.
6. Peen the rivet on a hard surface until tight; repeat for remaining rivet.

Occidental Leather B5114K Features

• Low-profile carry keeps tool snug and secure
• DIY installation with copper rivets and guidance
• Premium, handcrafted leather construction
• Made in USA

Occidental Leather B5114K Applications

• Framing work requiring fast cat's paw access
• Roofing tasks where low-swing storage is preferred
• General carpentry and trim installation
• Outfitting tool belts, vests, and rigs with a dedicated sleeve

Occidental Leather B5114K Installation Overview

1. Gather tools: smooth face hammer, cutters, 9/32 socket, pick, drill with 3/16 bit, and hard surface.
2. Drill out two outer rivets from the non-dominant side bag.
3. Insert the new rivet through the hanger and through the sleeve hole.
4. Seat washer using a hammer and socket or small pipe.
5. Trim rivet to leave about 1/8 to 3/16 length.
6. Peen rivet on a hard surface with a smooth face hammer to finish.

Occidental Leather 5570 Features

• Full grain leather construction for durability
• Dedicated holders for circle cutter, metal snips, saw, knife, Surform, Oxy tool shield, C-clamps, pencils, and hammer
• Designed for right hand use
• Optimized for drywall professionals
• Keeps all essential tools within easy reach
• Made in the USA

Occidental Leather B5068 Features

• All-leather construction for long-term durability
• Snap closure secures calculator and allows quick access
• Fits up to a 3 inch work belt
• Compatible with Construction Master models I, II, III, IV and other brands
• Also available as clip-on model B6568

Occidental Leather B5068 Applications

• Jobsite calculator protection and portability
• Belt-mounted storage for quick measurement access
• Secure carry while walking, climbing, or working

Occidental Leather B5068 Installation Overview

1. Slide the case onto a belt up to 3 inches wide.
2. Insert the calculator into the pouch.
3. Close the snap to secure and check fit.