Shop Your Trade

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 8581 Key Features

• FatLip leather mouth keeps the bag formed, open, and protected from abrasion
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated sleeves and pouches for tri-square, cat's paw, nail sets, and driver bits
• Accepts belts up to 3 in wide
• Made in the USA

Occidental Leather 8581 Applications

• Carrying nails, screws, and common fasteners
• Organization for angle square, tri-square, and layout tools
• Holstering cat's paw and driver bits for framing and drywall tasks
• General construction use on the non-dominant side

Occidental Leather 8581 Installation Overview

1. Slide the bag onto a work belt up to 3 in wide.
2. Wear on the left side for right-handed setups.
3. Load fasteners and tools into main and outer compartments.
4. Seat the angle square in the built-in holster and secure small bits in dedicated pouches.
5. Verify comfortable position and accessibility before work.

Occidental Leather 5062 Features

• 4 pouch layout for compact, expanded capacity
• 10 pockets and tool holders for fasteners and layout gear
• Tool-specific slots for blade square, angle square, driver bits, and cat's paw
• Full-grain leather construction for long-term durability
• Worn on the non-dominant side; available as left-hand 5062LH
• Made in the USA

Occidental Leather 5062 Applications

• Framing and general carpentry tool and fastener carry
• Organizing layout tools like blade and angle squares
• Quick access to driver bits, nail sets, and cat's paw
• Left-side fastener storage for right-handed users

Occidental Leather 5062 Installation Overview

1. Slide the pouch onto a 3 in belt or compatible work belt.
2. Position on the left side for right-handed use or select 5062LH for left-handed layout.
3. Load fasteners and tools into the four stacked compartments.
4. Place blade square and angle square in designated holders; store bits and cat's paw in slots.
5. Confirm secure fit and balanced carry before use.

Occidental Leather 8089 LG Key Features

• Hand specific tool layout for efficient workflow
• Padded two ply bags maintain shape
• Extremely abrasion resistant industrial nylon body
• Leather tool holders and corner reinforcements
• 12 oz belting leather with steel roller buckle
• Pockets and tool holders: 22
• Weight: 4.1 lbs

Occidental Leather 8089 LG Applications

• Framing and general carpentry tool organization
• Jobsite fastener and hand tool carry
• Daily wear belt system for professional builders

Occidental Leather 8089 LG Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. If you do not have a belt, add 4 inches to pant waist to estimate mid range.
4. Adjust the 5035 belt using the roller buckle for a secure fit.

Occidental Leather 5080DB-XL Key Features

• Premium top-grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand-specific layout supports natural workflow
• Copper-riveted reinforcement at stress points
• Built-in tape holster fits tapes up to 30 ft FatMax
• Made in USA

Occidental Leather 5080DB-XL Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Daily professional construction use

Occidental Leather 5080DB-XL Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm XL sizing.
2. Position tool bag on dominant hand side; fastener bag on opposite side.
3. Adjust belt to midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners; use NoSpill holders and tape holster as intended.
5. Re-check fit and balance before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5522 Key Features

• 4-in-1 functionality for tape, pencil, crayon or screwdriver, plus sharp tools
• Full-grain American leather for long service life
• Free Oxy Tool Shield included for chisels, knives, cutters
• Belt-ready tunnel loop fits up to 3 in. belts
• Made in USA

Occidental Leather 5522 Applications

• On-belt organization for measuring and marking tools
• Carpentry and framing jobs requiring quick access to tape and pencil
• General construction and DIY tool carry
• Safe storage of sharp tools using the included shield

Occidental Leather 5522 Installation Overview

1. Slide the holder onto a belt up to 3 in. wide.
2. Seat the Oxy Tool Shield in the lower pocket.
3. Place tape measure in the main pocket.
4. Insert pencil and crayon or screwdriver in side sleeves.
5. Load sharp tools into the shield and verify secure fit.

Occidental Leather 9525XXL Key Features

• 25 pockets and tool holders
• Round bottom, full capacity bags maintain shape
• Includes 2003 Oxy Tool Shield
• Hand specific tool layout for work rhythm
• 12 oz belting leather with steel roller buckle and padded nylon belt

Occidental Leather 9525XXL Applications

• Trim installation and finish carpentry
• Light framing and punch list tasks
• Cabinet, door, and window setting
• General tool carry and organization on site

Occidental Leather 9525XXL Installation Overview

1. Measure existing belt from buckle to the hole used to determine belt size.
2. Adjust the work belt so pouches ride at a comfortable height.
3. Place fastener bag on left and tool bag on right for standard layout.
4. Attach Oxy Tool Shield and 2-in-1 holder to preferred positions.
5. Load tools and confirm balance and comfort before use.

Occidental Leather 5589 Key Features

• All leather commercial grade electricians case
• 25 pockets and holders for comprehensive tool organization
• Heavy duty electrical tape chain and metal utility clip
• Right side wear layout for right handed users
• Black leather tool holders with reinforced stitching
• Made in USA

Occidental Leather 5589 Applications

• Commercial and residential electrical work
• Organizing and carrying pliers, strippers, screwdrivers, and meters
• Quick access to electrical tape, markers, and small tools

Occidental Leather 5589 Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Position on the right side for right handed workflow.
3. Load frequently used tools into front holders; place bulk items in the main bag.
4. Attach electrical tape to the chain and clip small items to the utility clip.
5. Adjust placement on belt for comfort and balance.

Occidental Leather 5020 Key Features

• Two tools, one footprint for belt space efficiency
• Slides easily onto standard tool belts
• 12 oz English bridle leather construction for durability
• Purpose built for pros and DIY users
• Made in USA

Occidental Leather 5020 Applications

• Carry a hammer and pliers or similar hand tool at the ready
• Carpentry and framing work on site
• General construction and remodel tasks
• Workshop and home project tool carry

Occidental Leather 5020 Installation Overview

1. Thread the holder loop onto your work belt.
2. Position at the preferred hip location.
3. Insert hammer into the metal loop.
4. Place a hand tool into the leather pocket.
5. Check clearance and adjust belt position for comfort.

Occidental Leather 5191 M Features

• Unique one-piece toolbelt assembly for balanced load
• Premium top-grain leather construction
• Sheepskin-lined interior for comfort
• Hand-specific tool holders with NoSpill system
• Copper-riveted main bags for durability
• Function-engineered layout based on 5060 and 5018 bags
• Made in USA

Occidental Leather 5191 M Applications

• Framing and general carpentry tool organization
• Remodeling projects requiring quick tool access
• Finish and trim work with hand-specific layout
• Jobsite setups needing secure, no-spill holders
• Daily professional use in demanding outdoor conditions

Occidental Leather 5191 M Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove and lay belt flat; measure from buckle end to the used hole.
3. Match measurement to size chart; select Medium if midpoint is 37 in.
4. Adjust fit using the midpoint hole with 4 in range each way.

Occidental Leather 5523 Key Features

• 4-in-1 capacity for tape, pencil, crayon or screwdriver, plus sharp tool
• Includes Oxy Tool Shield for chisel, knife, or cutter protection
• Extra heavy duty steel clip fits belts up to 2 in wide
• Sturdy American leather construction for long service life
• Compact clip-on design saves belt space
• Made in USA

Occidental Leather 5523 Applications

• Everyday carry of tape measure and small hand tools
• Safe transport of chisels or knives with the included shield
• Carpentry and trim layout tasks
• General construction and remodeling

Occidental Leather 5523 Installation Overview

1. Slide the steel clip onto a belt up to 2 in wide.
2. Place tape measure in the main pocket.
3. Insert pencil and crayon or screwdriver into their sleeves.
4. Seat sharp tools inside the Oxy Tool Shield.
5. Adjust position on belt for comfort and access.

Occidental Leather 5590M Key Features

• Hand-specific layout promotes efficient workflow
• NoSpill leather holders for secure, form-fit tool retention
• 37 pockets and holders for full jobsite loadouts
• Rugged leather build with select industrial nylon components
• Made in USA

Occidental Leather 5590M Applications

• Commercial electrical installation and service
• Tool and fastener organization on the jobsite
• Journeyman-level daily use
• General maintenance and troubleshooting

Occidental Leather 5590M Installation Overview

1. Measure from belt buckle end to the hole you use on your current tool belt.
2. Select the medium size if your measurement aligns with 37 in midpoint.
3. Position tool bags for hand-specific workflow.
4. Secure hammer holder and accessories to the belt.
5. Load tools and adjust fit for comfort.

Occidental Leather 9520 Key Features

• Compact 2 in 1 design adds fastener capacity without extra bulk
• Round bottom nylon pouches hold shape and resist collapse
• Speed square slot for inside or outside carry
• Includes Oxy Tool Shield for sharp tool protection
• 11 total pockets and tool holders
• Available in right or left hand layouts
• Made in USA

Occidental Leather 9520 Applications

• Trim carpentry and finish installations
• General framing and layout tasks
• Organizing fasteners, bits, and small tools
• Speed square carry and quick measurement access

Occidental Leather 9520 Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Choose left or right hand layout to match your setup.
3. Place fasteners in the main and outer bags; organize small tools in holders.
4. Insert sharp tools into the Oxy Tool Shield.
5. Seat the speed square in the dedicated slot for quick access.

Occidental Leather 5066 Features

• Premium full grain leather construction for long term durability
• Angled ergonomic design for improved balance and access
• Two built in holders for drill or driver bits
• Fits most cordless drills
• Available in right or left handed versions; left handed model 5066LH
• Made in the USA

Occidental Leather 5066 Applications

• Hands free carry of cordless drills on the jobsite
• Quick access drilling for framing and carpentry
• Tool organization for electricians and installers
• General construction and remodeling tasks

Occidental Leather 5066 Installation Overview

1. Slide holster onto your work belt at the preferred position.
2. Adjust placement for comfortable angled access.
3. Secure the retention strap snap if desired.
4. Insert drill fully; place bits in the dedicated holders.
5. Test movement to ensure secure, unobstructed access.

Occidental Leather 8583 Key Features

• FatLip leather mouth keeps the bag open and protected
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Tri-square sleeve, cat's paw loop, and external pouches for nail sets or driver bits
• Designed as the left-side fastener bag for right-handed setups; left-handed version available as 8583LH
• Made in USA

Occidental Leather 8583 Applications

• Framing and structural carpentry fastener storage
• Drywall and general construction small tool organization
• Quick-access holster for angle squares on the jobsite
• Left-side carry for right-handed belt systems

Occidental Leather 8583 Specifications

Occidental Leather 9596 Key Features

• All-leather construction built for commercial electricians
• Adjust-to-Fit belt fits 32 to 40 inch pant waists
• NoSpill leather holders help prevent tool drops
• Hand-specific layout for fast, efficient access
• Balanced design for all-day comfort
• Made in the USA

Occidental Leather 9596 Applications

• Electrical install and service tasks
• Rough-in and finish wiring work
• Panel, fixture, and device installation
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use.
2. Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
3. Position pouches and holders for hand-specific access.
4. Cinch belt to a comfortable, balanced fit and verify tool retention.

Occidental Leather 5500 Key Features

• All leather construction for durability
• 15 pockets and tool holders for everyday electrical tools
• Flashlight loop, electrical tape chain, and quick release tool snap
• Heavy duty hammer holder
• Tunnel loop mount fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5500 Applications

• Daily electrical service and installation
• Organized belt carry for screwdrivers, pliers, and testers
• Maintenance and facility repair work
• Remodeling and jobsite troubleshooting

Occidental Leather 5500 Installation Overview

1. Thread work belt through the tunnel loop; fits up to 3 in. width.
2. Load core tools into dedicated pockets and sleeves.
3. Attach small tools to the quick release snap as needed.
4. Hang electrical tape rolls on the chain for quick access.
5. Confirm balance and secure fit before use.

Key Features

• Hand-specific tool holders for efficient access
• Padded two-ply, foam-core bags maintain shape
• Abrasion-resistant industrial nylon construction
• Adjust-to-Fit belt allows quick sizing changes
• D-rings pre-installed for suspension system compatibility
• Left-handed model available as 9540LH
• Made in USA

Applications

• Finish carpentry setups
• Trim installation
• Light framing tasks
• General jobsite tool and fastener organization

Installation Overview

1. Adjust belt to fit over typical work clothing.
2. Position left fastener and right tool bags for reach preference.
3. Attach the high mount hammer holder at the center back.
4. Clip Oxy Tool Shields to bags or belt as needed.
5. Load tools and fasteners evenly; connect suspenders to D-rings if used.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather 8567 Key Features

• Right-hand layout
• Fits a 3 in belt
• Hybrid construction: industrial nylon body with leather reinforcement
• 4 pockets and holders for drill, bits, and small tools
• Compatible with select Bosch, Hitachi, Makita, and Milwaukee compact drills and drivers
• Made in USA

Occidental Leather 8567 Applications

• Hands-free carry of cordless drills and impact drivers
• Bit and small fastener organization on the belt
• Framing, punch-out, and general construction tasks

Occidental Leather 8567 Installation Overview

1. Slide the holster onto a work belt up to 3 inches wide.
2. Secure the leather strap/snaps as designed.
3. Place the drill or driver in the main pocket.
4. Store bits and small tools in the exterior sleeves.

Key Features

• 12 pockets and tool holders in a compact, jobsite-efficient layout
• Two-ply foam-core construction maintains structure when empty or loaded
• Clip-on leather tab for tape or accessory pouches
• Steel hammer loop; interior leather tool sleeves
• Right-hand layout; left-hand model available as 9521LH

Applications

• Trim carpentry and finish work
• Light framing tasks
• Cabinetry and punch-list work
• Right-side tool carry for dominant-hand access

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for standard orientation.
3. Attach clip-on leather tab accessories as needed.
4. Insert the Oxy Tool Shield for chisels or knives.
5. Load tools and check balance and access.

Occidental Leather 5057 Features

• 4 pocket layout keeps small tools separated and easy to grab
• Premium leather construction with reinforced stitching
• In pocket carry or snap loop for belt use
• Fits most belts up to 2.5 inches wide
• Lightweight, compact design for everyday tasks
• Made in USA

Occidental Leather 5057 Applications

• Small repairs and service calls
• Electrical and shop maintenance
• Gardening and farm upkeep
• Cabinet and finish work

Occidental Leather 5057 Installation Overview

1. Load tools into the four pockets as needed.
2. Place the caddy in a front or rear pocket, or
3. Attach via the snap loop to a belt up to 2.5 inches wide.
4. Adjust position for comfortable access and secure carry.

Occidental Leather 8080DB XXL Key Features

• 21 pockets and tool holders
• Hand specific tool holder layout
• Padded two ply nylon bags maintain structure
• Abrasion resistant industrial nylon
• Leather tool holders and corner reinforcement
• Made in USA

Occidental Leather 8080DB XXL Applications

• Framing tasks and general carpentry
• Organizing and carrying essential jobsite tools and fasteners
• Efficient workflow with hand specific pouch layout

Occidental Leather 8080DB XXL Installation Overview

1. Size the Ranger Work Belt to your belt measurement and secure at a comfortable hole.
2. Attach tool and fastener bags and the hammer holder to the belt.
3. Load tools and fasteners into hand specific pockets for your workflow.
4. Check balance and adjust bag positions for comfort and access.