Belt-Free Tool Systems & Rigs

Occidental Leather 5055 Features

• Even load distribution for reduced hip and back fatigue
• Padded, contoured yoke lined with Dri-Lex for moisture wicking
• Chest pockets for pencils and clip-on items on both sides
• Easy on-off with adjustable chest strap
• Heavy-duty D-ring for hanging the rig
• One size fits most
• Made in USA

Occidental Leather 5055 Applications

• Support and stabilize loaded tool belts during long shifts
• Improve comfort and reduce strain for framing and carpentry work
• Keep suspenders and straps securely positioned while moving
• Hang up belt rig between tasks using center D-ring

Occidental Leather 5055 Installation Overview

1. Attach the leather loop connectors to your work belt (up to 3 in).
2. Clip the suspender straps to the belt loops.
3. Adjust the chest strap for a secure, comfortable fit.
4. Set strap lengths to distribute weight evenly across shoulders.
5. Confirm all connections are secure; D-ring is for hanging only.

Key Features

• Purpose built to fasten leather straps to the 5055 Suspender pad
• Simple, field-ready installation using Chicago screws
• Leather washers help protect and secure the strap connection
• Compact, lightweight kit for replacements or spares
• Made in USA

Applications

• Attach leather suspender straps to the 5055 pad
• Replace missing or worn hardware on the 5055 system
• Tighten or refresh existing strap connections

Installation Overview

1. Position strap and pad per the 5055 layout.
2. Align holes and place leather washer at the connection point.
3. Insert Chicago screw post through the pad and strap.
4. Thread and tighten the screw until secure; do not overtighten.
5. Repeat for the second connection and verify a snug, secure fit.

Occidental Leather 5093 Key Features

• Padded shoulder yoke lined with Dri-Lex for moisture management
• Fully adjustable straps for a personalized fit
• Even weight distribution to reduce lower back strain
• 25 total pockets and holders keep tools accessible
• Right-handed layout; hand-specific tool placement
• Includes 5156 Cradle Hammer Holder on rear
• One size fits most; expansion kit 5045 available for builders over 6 ft 2 in
• Made in the USA

Occidental Leather 5093 Applications

• Framing and general carpentry tool carry
• Remodeling projects requiring high-capacity organization
• Jobsites where belt-free load distribution is preferred
• All-day wear to reduce hip and lower back fatigue
• Use with clip-on holders and accessories for custom setups

Occidental Leather 5093 Installation Overview

1. Adjust shoulder straps and chest strap for a secure, comfortable fit.
2. Attach fastener and tool bags to the suspension rings.
3. Clip on the hammer holder and accessory holders as desired.
4. Load tools evenly across both sides to balance weight.
5. Fine-tune strap tension and verify unrestricted movement.

Occidental Leather 2500 Features

• Wide padded shoulder support lined with Dri Lex for comfort
• Fully adjustable straps for a personalized fit
• Even load distribution to reduce fatigue
• 17 pockets and holders to minimize tool clutter
• Quick release chest strap buckle for fast on off
• Heavy duty D ring for hanging storage

Occidental Leather 2500 Applications

• Framing tasks where balanced tool carry is needed
• Electrical work requiring quick access to hand tools
• Concrete work and general construction
• Trim and finish work in tight spaces

Occidental Leather 2500 Installation Overview

1. Adjust shoulder straps and chest buckle for a comfortable fit.
2. Attach compatible tool bags to the 3 inch leather belting as needed.
3. Load tools evenly across pockets to balance weight.
4. Snap the chest strap buckle to secure the vest.
5. Use the D ring for hanging storage when not in use.

Occidental Leather 5355 Key Features

• Suspension system redistributes belt load for reduced strain
• Hip Buddies padding softens impact on hips and lower back
• Accepts any bag up to 7.5 inches wide
• Made in USA; leather and nylon construction
• Available colors: OxyRed and Black
• Not compatible with Adjust-to-Fit systems or Stronghold Comfort Belts; does not fit 5525 or B5611 bags

Occidental Leather 5355 Applications

• Comfort upgrade for heavy tool belt setups
• Reducing hip and lower back fatigue on long shifts
• General construction, carpentry, electrical, and remodeling work
• Supporting weight evenly during climbing, bending, and overhead tasks

Occidental Leather 5355 Installation Overview

1. Attach the 9008 Hip Buddies around your work belt at the hip areas.
2. Clip the 5055 suspension straps to the belt D-rings or belt loops per your setup.
3. Adjust front and rear strap lengths for even weight distribution.
4. Secure the chest strap for stability and fine tune fit.
5. Verify bag width does not exceed 7.5 inches and confirm compatibility.

Occidental Leather 5595 Key Features

• Go beltless using bags that accept a 3 inch belt
• Enables use of traditional Occidental bags
• Made in USA
• Does not accommodate 5611 or B5611

Occidental Leather 5595 Applications

• Upgrade existing tool bags to a beltless carry system
• Improve comfort for extended wear on the jobsite
• Customize tool bag setups without a waist belt

Occidental Leather 5595 Installation Overview

1. Verify your bags accept a 3 inch belt.
2. Attach kit hangers to compatible bags.
3. Connect the harness and clips per layout.
4. Adjust straps for fit and balance.
5. Confirm secure attachment before loading tools.

Occidental Leather 9501 Key Features

• Cost efficient fastener management
• Single clip-on design for quick swaps between applications
• Keep multiple pouches preloaded and clipped to your toolbox or truck
• Adds fastener storage or sub divides existing main bags
• Secure steel clip fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9501 Applications

• Add fastener capacity to any belt setup
• Sub-divide larger tool bags for better organization
• Preload pouches for task-specific jobs and swap quickly
• Clip to toolboxes or bags for mobile storage
• Use on belts up to 2 inches wide

Occidental Leather 9501 Installation Overview

1. Load fasteners or small parts into the pouch.
2. Position the steel clip over a belt up to 2 inches wide or onto a toolbox/bag edge.
3. Press firmly to seat the clip securely.
4. Arrange multiple preloaded pouches as needed for the task.
5. Remove and swap pouches when changing applications.

Occidental Leather 5592 Features

• Go beltless with the 5055 Stronghold Suspension System
• Works with bags designed for a 3 inch belt
• Wide hangers provide stable bag support
• Made in USA

Occidental Leather 5592 Applications

• Convert a traditional belt rig to a beltless setup
• Customize tool bag layout for carpentry and construction
• Reduce waist bulk while maintaining bag capacity
• Integrate existing bags with a suspension system

Occidental Leather 5592 Installation Overview

1. Attach the Retro Tabs to the 5055 Stronghold Suspension System per manufacturer guidance.
2. Hang traditional bags that accept a 3 inch belt onto the tabs.
3. Adjust suspension straps for balanced load and comfort.
4. Verify all connections are secure before use.

Occidental Leather 9504 Key Features

• Cost efficient organization for small tools and fasteners
• Seven-pocket, multi-pouch design with holders for pencil, utility knife, and angle square
• Heavy-duty clip attaches quickly to belts or waistbands
• Fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9504 Applications

• Small repairs and punch list tasks
• Trim and finish work
• General maintenance rounds
• Weekend DIY projects

Occidental Leather 9504 Installation Overview

1. Load tools and fasteners into main and outer pockets.
2. Clip the pouch to your belt or waistband.
3. Ensure clip is fully engaged; adjust placement for comfort.

Occidental Leather 2580 Key Features

• Maximum comfort with wide padded shoulder yoke lined with Dri-Lex for moisture control
• Even load distribution reduces back fatigue and increases carry efficiency
• Fully adjustable straps; one size fits most
• Quick release chest buckle for fast on/off
• Heavy-duty storage D-ring for hanging
• 36 pockets and tool holders for organized access
• Made in USA

Occidental Leather 2580 Applications

• Framing tasks requiring balanced tool carry
• Electrical installations and service work
• Concrete forming and layout
• Trim carpentry and finish work

Occidental Leather 2580 Installation Overview

1. Adjust shoulder straps and side straps for a comfortable fit.
2. Attach included tool and fastener bags to the leather belting.
3. Secure the chest buckle; verify even weight distribution.
4. Load essential tools into pockets and holders.
5. Use the D-ring to hang the vest when storing off the clock.

Occidental Leather 5045 Key Features

• Converts Beltless systems to fit larger body sizes
• 10 inch straps add about 5 inches to suspender length
• Back strap adds up to 6 inches between bags
• Durable leather and nylon construction
• Made in USA

Occidental Leather 5045 Applications

• Extend Beltless suspenders for big and tall users
• Accommodate winter layers or bulky clothing
• Increase spacing between tool bags for comfort

Occidental Leather 5045 Installation Overview

1. Attach each leather extension to the existing Beltless suspender clips.
2. Fasten the back strap between the bags using the leather loops.
3. Adjust the buckle to set desired spacing and length.
4. Test fit and fine-tune for comfort and balance.

Occidental Leather 8578 Features

• Clip-on mount with spring steel attachment for suspenders
• Padded phone sleeve with velcro flap
• Holders for pencils, notepad, and driver bits
• Seven total pockets and holders
• Easy to install and remove as needed
• Made in USA

Occidental Leather 8578 Applications

• Chest-mounted carry for daily jobsite essentials
• Secure phone storage while climbing or moving
• Quick access to pencils, notepad, and driver bits
• Organization add-on for Stronghold suspenders

Occidental Leather 8578 Installation Overview

1. Position the pocket on the chest strap of Stronghold suspenders.
2. Clip the spring steel attachment over the strap until secure.
3. Place phone in padded sleeve and close velcro flap.
4. Load pencils, notepad, and bits into the designated holders.
5. Check fit and accessibility before use.

Occidental Leather 9511 Key Features

• Cost efficient fastener management
• Modular clip-on design for easy swap between tasks
• Slightly deeper and narrower than the 9501
• Clips to belts up to 2 in wide; also clips to toolboxes or truck interiors
• Made in USA

Occidental Leather 9511 Applications

• Carrying nails, screws, and small fasteners
• Modular add-on storage for tool belts
• Quick-change setups for varied tasks
• Clipping to a truck or toolbox for organized access

Occidental Leather 9511 Installation Overview

1. Verify your belt is no wider than 2 in.
2. Slide the clip over the belt edge until fully seated.
3. Load fasteners into the pouch.
4. Adjust position on belt for comfort and reach.
5. Remove and reclip as needed for different applications.

Occidental Leather 2580LH Features

• Wide padded shoulder support lined with Dri Lex for moisture management
• Fully adjustable straps for a comfortable fit on most builders
• Balanced load carry to reduce strain and lower back fatigue
• 36 pockets and holders keep essential tools accessible
• Quick release chest buckle and heavy duty D ring for hanging storage

Occidental Leather 2580LH Applications

• Framing tasks needing high capacity tool access
• Electrical work with balanced weight distribution
• Concrete forming and layout
• Trim and finish work in tight spaces

Occidental Leather 2580LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure, comfortable fit.
2. Attach B8064LH and B8017LH bags to the 3 in leather belting.
3. Ensure tunnel loop attachments are seated; tighten as needed.
4. Load tools into the 36 pockets and holders to balance weight.
5. Use the D ring for hanging storage when removing the vest.

Occidental Leather 8071XL Features

• Extra-long back strap for the 5592 Beltless Retro Kit only
• 6 inches longer than the standard 8071 strap
• Heavy-duty build for jobsite durability
• Made in the United States

Occidental Leather 8071XL Applications

• Extend rear strap length on 5592 Beltless Retro Kit
• Improve bag swing and comfort for larger frames
• Replace worn or damaged back strap on compatible kits

Occidental Leather 8071XL Installation Overview

1. Detach the existing back strap from the Beltless Retro Kit.
2. Loop the 8071XL strap through the rear buckle/attachment points.
3. Secure using the provided leather tabs and hardware.
4. Adjust length for desired bag swing and fit.
5. Check connections to ensure secure attachment before use.

Occidental Leather 5044XL Key Features

• Adds extra length to existing suspenders for a better fit
• Compatible with Occidental 5009 and 5055 suspenders and systems
• Durable leather straps with metal hardware
• Quick clip-on connection for easy setup
• Sold as a matched pair; Made in USA

Occidental Leather 5044XL Applications

• Extend fit range for big and tall builders
• Upgrade or replace worn suspender extensions
• Improve comfort when wearing heavy tool belts

Occidental Leather 5044XL Installation Overview

1. Detach suspenders from your belt or vest if needed.
2. Clip each extension to the suspender connection point.
3. Attach the opposite end to your belt or harness D-rings.
4. Adjust suspender length for a comfortable fit.
5. Verify all clips are fully seated before use.

Occidental Leather 2500LH Key Features

• Wide padded shoulder support lined with Dri-Lex for comfort
• Fully adjustable straps for freedom of movement
• Even weight distribution across the body
• 17 pockets and holders keep tools accessible
• Quick-release chest strap buckle; rear D ring for hanging
• Left-handed layout

Occidental Leather 2500LH Applications

• Framing and general carpentry
• Electrical installation and service work
• Concrete forming and finishing tasks
• Trim and finish carpentry
• Jobsite tool organization without a traditional belt

Occidental Leather 2500LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure fit.
2. Load essential tools into the built-in pockets and holders.
3. Attach compatible tool bags to the leather belting as needed.
4. Balance load between sides for even weight distribution.
5. Use rear D ring to hang the vest when storing.

Occidental Leather 8552 Key Features

• 2 inch belt clip for fast on off attachment
• Drawstring closure keeps contents secure yet accessible
• Dual layer 1000D nylon sides and 1050D nylon bottom for wear resistance
• Medium size: 6 in diameter x 7 in high
• Made in the USA

Occidental Leather 8552 Applications

• Carry fasteners, anchors, and small hardware
• Quick access storage for bits and small hand tools
• Add on pouch for tool belts and vests
• Jobsite organization for installers and carpenters

Occidental Leather 8552 Installation Overview

1. Slide the 2 inch clip over your belt, pocket, or strap.
2. Load hardware or tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Release the clip to reposition or remove as needed.

Occidental Leather 5055P Key Features

• Replacement shoulder pad for Stronghold Suspension System
• Ambidextrous design fits left or right shoulder
• Industrial nylon construction for long service life
• Made in USA

Occidental Leather 5055P Applications

• Replace worn or damaged pad on the 5055 Stronghold system
• Improve comfort during extended tool belt use
• Configure suspension setup for left or right shoulder wear

Occidental Leather 5055P Installation Overview

1. Remove the existing shoulder pad from the 5055 system.
2. Position the replacement pad on the desired shoulder side.
3. Attach using the system hardware per manufacturer guidance.
4. Adjust straps for a secure and comfortable fit.
5. Verify movement and load distribution before use.

Occidental Leather B8551 Features

• 2-inch belt clip for quick attachment and removal
• Drawstring top keeps fasteners and small tools secure
• Dual-layer 1000D nylon sides with 1050D nylon bottom
• Small size: 5 in diameter x 6 in high; color: black
• Proudly made in the USA

Occidental Leather B8551 Applications

• Carry nails, screws, and small fasteners
• Store small hand tools and accessories
• Quick-grab pouch for trim and finish tasks
• Add-on storage for tool belts and work vests

Occidental Leather B8551 Installation Overview

1. Slide or clip the pouch onto a work belt using the 2-inch belt clip.
2. Load fasteners or small tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Adjust pouch position for comfortable reach.

Occidental Leather 5064 Key Features

• Beltless design integrates with Stronghold Beltless System
• 3-pouch layout with dual outer bags for organization
• Right-side orientation for quick access to frequently used tools
• 10 pockets and holders for hand tools and layout gear
• Premium leather construction; made in the USA

Occidental Leather 5064 Applications

• Right-side carry for hammers, knives, chisels, and pencils
• Beltless setups using Stronghold hubs and suspenders
• Carpentry, framing, trim, and general construction tasks

Occidental Leather 5064 Installation Overview

1. Attach the bag to your Stronghold Beltless System hubs or suspenders.
2. Position on the right side for preferred access.
3. Load tools into the main and dual outer pouches for balance.
4. Confirm rings and connectors are fully seated before use.

Key Features

• Patented 2-in-1 pouch with angle square holster
• 38 total pockets & tool holders for full organization
• Comfortable foam shoulder pads lined with Dri-Lex to wick perspiration
• Weight carried on upper body for reduced lower-back strain
• Removable left and right bags; clip together for freestanding access
• Vest can hang by D-ring at jobsite; bags removable for vest-only wear
• Ergonomic, belt-free design fits over seasonal clothing
• Not offered in a left-handed model

Applications

• Hands-free tool carry and organization on the jobsite
• Working in tight areas with freestanding, clip-together bags
• Reducing lower-back load by shifting weight to shoulders/chest
• General construction, remodeling, and maintenance tasks

Installation Overview

1. Adjust vest straps for a secure, comfortable fit over workwear.
2. Load tools and fasteners into the 38 pockets/holders as needed.
3. Clip removable bags to the vest or to each other for freestanding access.
4. Use the D-ring to hang the vest at the jobsite when not worn.
5. Re-adjust for seasonal layers to maintain unrestricted movement.