Occidental Leather Utility Pouches & Tool Organizers

Occidental Leather 5053 Key Features

• Five pockets and tool holders in a compact layout
• Dedicated test meter pocket fits most compact testers
• Snap loop carry hangs over belts up to 2 inches wide or carry standalone
• All-leather, professional grade construction
• Made in USA

Occidental Leather 5053 Applications

• Estimating and inspections
• Troubleshooting and service calls
• Trim-out and finish electrical tasks

Occidental Leather 5053 Installation Overview

1. Open snap loop and place over a belt up to 2 inches wide or carry by hand.
2. Seat the caddy against the belt and close the snap securely.
3. Load tools into the five pockets, placing the test meter in the larger pocket.
4. Verify all tools are seated and the snap is fully engaged before use.

Occidental Leather 5019 Features

• All-leather construction for durability
• Clean interior with no tool holders or dividers
• Compact size suited for fasteners and small tools
• Made in USA
• Riveted and stitched for strength

Occidental Leather 5019 Applications

• Carry loose fasteners on the job
• Store small hand tools or accessories
• Add-on third bag for tool belt systems
• General utility storage for carpentry or trade work

Occidental Leather 5019 Installation Overview

1. Slide pouch onto compatible work belt or mount per your rig setup.
2. Position for comfortable reach and balance.
3. Load with fasteners or small tools; avoid overfilling.
4. Check stitching and rivets periodically for wear.

Occidental Leather 6104 Key Features

• Streamlined 2-pouch utility design
• No tool holders inside or outside for simple storage
• Durable leather construction
• Lightweight and compact for belt setups
• Made in the USA

Occidental Leather 6104 Applications

• Storing fasteners and small hardware
• Carrying loose hand tools
• Expanding capacity on a tool belt
• Organizing overflow items on the jobsite

Occidental Leather 6104 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position for preferred access on your belt setup.
3. Load fasteners or small tools into main and outer pouches.
4. Check balance and adjust placement as needed.

Occidental Leather 5057 Features

• 4 pocket layout keeps small tools separated and easy to grab
• Premium leather construction with reinforced stitching
• In pocket carry or snap loop for belt use
• Fits most belts up to 2.5 inches wide
• Lightweight, compact design for everyday tasks
• Made in USA

Occidental Leather 5057 Applications

• Small repairs and service calls
• Electrical and shop maintenance
• Gardening and farm upkeep
• Cabinet and finish work

Occidental Leather 5057 Installation Overview

1. Load tools into the four pockets as needed.
2. Place the caddy in a front or rear pocket, or
3. Attach via the snap loop to a belt up to 2.5 inches wide.
4. Adjust position for comfortable access and secure carry.

Occidental Leather 9920 Key Features

• Pro Leather construction for long service life
• Bull pin loop on each side for convenient access
• Tunnel loop accepts work belts up to 3 inches
• Three total pockets and holders for organized storage
• Made in the USA

Occidental Leather 9920 Applications

• Carrying bolts and heavy fasteners on steel erection and ironwork
• Keeping bull pins and drift pins accessible on the job
• General construction tasks requiring a rugged fastener pouch

Occidental Leather 9920 Installation Overview

1. Thread the tunnel loop onto a work belt up to 3 inches wide.
2. Position the bag at preferred location on the belt.
3. Load bolts and fasteners into the main pocket.
4. Place bull pins in the side loops for quick access.

Occidental Leather B9019 Key Features

• Compact single-compartment pouch for fast access
• Padded, double wall industrial nylon for structure and durability
• Lightweight design suited for small jobs or as a third bag
• Slides onto work belts; compatible up to 3 in. belts
• Made in the USA

Occidental Leather B9019 Applications

• Carry fasteners, parts, or small hand tools
• Add-on storage for tool belt systems
• Service calls and light-duty tasks
• Organizing essentials for trim or punch list work

Occidental Leather B9019 Installation Overview

1. Thread the bag onto your work belt (fits up to 3 in.).
2. Position at preferred location for access.
3. Load with small tools, fasteners, or parts.
4. Check balance and adjust as needed on the belt.

Occidental Leather 9025 Key Features

• Compact 6-in-1 design combines pockets and holders
• Padded nylon fastener bag for added capacity
• Holds tape, hammer, knife or chisel, pencils and fasteners
• Space-saving add-on for tool belts or vests
• Ideal for trim, punch list, and small tasks

Occidental Leather 9025 Applications

• Carry essentials for quick service calls
• Trim and finish work where a light setup is needed
• Punch list tasks and small repairs
• Supplemental pouch for tool belts or vests

Occidental Leather 5023B Key Features

• Two-pouch leather bag with open, holder-free layout
• Durable full-leather construction for long service life
• Streamlined design for fasteners and small tools
• Made in the USA
• Lightweight and compact for everyday carry

Occidental Leather 5023B Applications

• Fastener storage for carpentry and framing
• Small tool organization for service and maintenance
• Trim and finish work where a compact pouch is preferred
• General jobsite use with minimal bulk

Occidental Leather 5023B Installation Overview

1. Place the pouch on your work belt or system per your preferred layout.
2. Load fasteners or small tools into the main and outer pockets.
3. Adjust placement for comfortable access during work.

Occidental Leather 9512 Features

• Tool-specific storage for tape, pad, pens, pencils, screwdriver, utility knife, and pliers
• Accepts work belts up to 2 inches wide
• Industrial 2-ply Cordura fabric with foam core for structure
• Made in the USA

Occidental Leather 9512 Applications

• Punch list jobs and service calls
• Inspections and light-duty tasks
• Field technician essentials carry
• Belt-mounted tool organization

Occidental Leather 9512 Installation Overview

1. Slide the pouch onto a work belt up to 2 inches wide.
2. Position the pouch for comfortable access.
3. Load tools into the dedicated holders.
4. Ensure items are seated securely before use.

Occidental Leather 5024 Features

• Extra deep 10 in open pouch for maximum capacity
• Full grain leather construction for long term durability
• Minimalist design without internal tool holders
• Belt mount for easy integration with tool belts
• Made in the USA

Occidental Leather 5024 Applications

• Carrying fasteners and hardware
• Stowing bulky or odd shaped tools
• General purpose jobsite carry on a work belt

Occidental Leather 5024 Installation Overview

1. Slide the pouch onto your work belt through the belt loop.
2. Position for preferred reach on dominant or opposite side.
3. Load tools or fasteners into the main pocket.
4. Adjust load for balance and secure carry.

Occidental Leather B5057 Features

• Compact 4 pocket organizer protects you, your tools, and your clothes
• Creates an instant mini tool carrier for pliers, screwdrivers, and more
• Snap loop attaches to belts up to 2 inches wide
• Durable leather construction for daily use
• Made in USA

Occidental Leather B5057 Applications

• Small repair jobs
• Shop and maintenance work
• Gardening and yard upkeep
• Cabinetmaking and finish tasks
• Farm and field repairs

Occidental Leather B5057 Installation Overview

1. Load tools into the four pockets to suit your task.
2. Place the caddy in your pant pocket or position at the belt line.
3. Wrap the snap loop around a belt up to 2 inches wide, if preferred, and close the snap.
4. Adjust tool placement for balance and quick access.
5. After use, remove debris and store dry.

Occidental Leather G9019 Key Features

• Compact single-compartment layout for quick access
• Padded, double-wall nylon adds structure and durability
• Lightweight design for comfortable all-day wear
• Great as a third bag or for small jobs
• Made in the USA

Occidental Leather G9019 Applications

• Extra storage on a tool belt for fasteners or small parts
• Light-duty service and punch-list tasks
• Add-on third bag for flexible belt setups
• General utility carrying on the jobsite

Occidental Leather G9019 Installation Overview

1. Slide the bag onto your work belt through the rear loop.
2. Position at the preferred location for access and balance.
3. Load with small tools or fasteners and confirm a secure fit.