Occidental Leather Mechanical Tool Pouches

Occidental Leather 5520 Key Features

• 5-in-1 functionality — organize hammer, pliers, pencil, crayon or screwdriver, and a sharp tool
• Removable Oxy Tool Shield protects chisels, knives, and other sharp edges
• Full-grain American leather for long service life
• Space-efficient footprint on your belt
• Slides onto work belts up to 3 inches wide
• Made in the USA

Occidental Leather 5520 Applications

• Framing and general carpentry hand tool carry
• Electrical trim and service work
• Punch list and maintenance tasks
• Everyday belt carry for essential hand tools

Occidental Leather 5520 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position for preferred hand access on your belt system.
3. Load hammer, pliers, pencil, and crayon or screwdriver into the dedicated sleeves.
4. Insert chisels or knives into the removable Oxy Tool Shield.
5. Check fasteners and leather for secure fit before use.

Occidental Leather 5037 Key Features

• High mount design keeps tape measure secure and accessible
• Top grain leather construction for durability
• Holds up to a 35 ft tape or FatMax
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5037 Applications

• Carrying and securing a tape measure on a work belt
• Framing, carpentry, and general construction tasks
• Remodeling and finish work where fast tape access is needed

Occidental Leather 5037 Installation Overview

1. Thread the holder onto your work belt (up to 3 in wide).
2. Position at preferred height for access.
3. Insert tape measure into pocket with clip facing outward.
4. Verify snug fit and comfortable reach before use.

Occidental Leather 5589 Key Features

• All leather commercial grade electricians case
• 25 pockets and holders for comprehensive tool organization
• Heavy duty electrical tape chain and metal utility clip
• Right side wear layout for right handed users
• Black leather tool holders with reinforced stitching
• Made in USA

Occidental Leather 5589 Applications

• Commercial and residential electrical work
• Organizing and carrying pliers, strippers, screwdrivers, and meters
• Quick access to electrical tape, markers, and small tools

Occidental Leather 5589 Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Position on the right side for right handed workflow.
3. Load frequently used tools into front holders; place bulk items in the main bag.
4. Attach electrical tape to the chain and clip small items to the utility clip.
5. Adjust placement on belt for comfort and balance.

Occidental Leather 5590M Key Features

• Hand-specific layout promotes efficient workflow
• NoSpill leather holders for secure, form-fit tool retention
• 37 pockets and holders for full jobsite loadouts
• Rugged leather build with select industrial nylon components
• Made in USA

Occidental Leather 5590M Applications

• Commercial electrical installation and service
• Tool and fastener organization on the jobsite
• Journeyman-level daily use
• General maintenance and troubleshooting

Occidental Leather 5590M Installation Overview

1. Measure from belt buckle end to the hole you use on your current tool belt.
2. Select the medium size if your measurement aligns with 37 in midpoint.
3. Position tool bags for hand-specific workflow.
4. Secure hammer holder and accessories to the belt.
5. Load tools and adjust fit for comfort.

Occidental Leather 5040 Key Features

• Quality leather and steel construction for durability
• Clip-on design allows quick on and off installation
• Spring steel clip fits belts up to 2 in wide
• Heavy-duty steel loop accommodates most hammers
• Made in USA

Occidental Leather 5040 Applications

• Keep a hammer secured to your belt for fast access
• Ideal for framing, carpentry, and general construction
• Convenient tool carry when working on ladders or overhead

Occidental Leather 5040 Installation Overview

1. Slide the spring clip onto your work belt.
2. Confirm the clip is fully seated and secure.
3. Place the hammer head through the steel loop.
4. Position for comfortable reach and adjust as needed.
5. Lift the clip to remove the holder when finished.

Occidental Leather 9501 Key Features

• Cost efficient fastener management
• Single clip-on design for quick swaps between applications
• Keep multiple pouches preloaded and clipped to your toolbox or truck
• Adds fastener storage or sub divides existing main bags
• Secure steel clip fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9501 Applications

• Add fastener capacity to any belt setup
• Sub-divide larger tool bags for better organization
• Preload pouches for task-specific jobs and swap quickly
• Clip to toolboxes or bags for mobile storage
• Use on belts up to 2 inches wide

Occidental Leather 9501 Installation Overview

1. Load fasteners or small parts into the pouch.
2. Position the steel clip over a belt up to 2 inches wide or onto a toolbox/bag edge.
3. Press firmly to seat the clip securely.
4. Arrange multiple preloaded pouches as needed for the task.
5. Remove and swap pouches when changing applications.

Occidental Leather 9596 Key Features

• All-leather construction built for commercial electricians
• Adjust-to-Fit belt fits 32 to 40 inch pant waists
• NoSpill leather holders help prevent tool drops
• Hand-specific layout for fast, efficient access
• Balanced design for all-day comfort
• Made in the USA

Occidental Leather 9596 Applications

• Electrical install and service tasks
• Rough-in and finish wiring work
• Panel, fixture, and device installation
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use.
2. Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
3. Position pouches and holders for hand-specific access.
4. Cinch belt to a comfortable, balanced fit and verify tool retention.

Occidental Leather 5053 Key Features

• Five pockets and tool holders in a compact layout
• Dedicated test meter pocket fits most compact testers
• Snap loop carry hangs over belts up to 2 inches wide or carry standalone
• All-leather, professional grade construction
• Made in USA

Occidental Leather 5053 Applications

• Estimating and inspections
• Troubleshooting and service calls
• Trim-out and finish electrical tasks

Occidental Leather 5053 Installation Overview

1. Open snap loop and place over a belt up to 2 inches wide or carry by hand.
2. Seat the caddy against the belt and close the snap securely.
3. Load tools into the five pockets, placing the test meter in the larger pocket.
4. Verify all tools are seated and the snap is fully engaged before use.

Occidental Leather 5500 Key Features

• All leather construction for durability
• 15 pockets and tool holders for everyday electrical tools
• Flashlight loop, electrical tape chain, and quick release tool snap
• Heavy duty hammer holder
• Tunnel loop mount fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5500 Applications

• Daily electrical service and installation
• Organized belt carry for screwdrivers, pliers, and testers
• Maintenance and facility repair work
• Remodeling and jobsite troubleshooting

Occidental Leather 5500 Installation Overview

1. Thread work belt through the tunnel loop; fits up to 3 in. width.
2. Load core tools into dedicated pockets and sleeves.
3. Attach small tools to the quick release snap as needed.
4. Hang electrical tape rolls on the chain for quick access.
5. Confirm balance and secure fit before use.

Occidental Leather 5137 Key Features

• High mount belt design for better mobility
• Extra Large fit for 35 ft FatMax style tape measures
• Premium durable leather construction
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5137 Applications

• Daily tape measure carry on tool belts
• Framing and layout tasks
• General carpentry and jobsite measuring

Occidental Leather 5137 Installation Overview

1. Slide holster onto a belt up to 3 in wide and position at desired height.
2. Insert tape measure into the holster with the base aligned to the cutout.
3. Confirm secure fit and accessibility before use.

Occidental Leather 5036SM Key Features

• Premium top grain leather tool bags
• 12 oz belting leather belt with steel roller buckle
• NoSpill tool holder system keeps tools upright
• Hand specific organization engineered for electricians
• Made in USA

Occidental Leather 5036SM Applications

• Electrical install and service work
• Wire termination and panel assembly
• Commercial and residential troubleshooting
• Tool and fastener organization on the jobsite

Occidental Leather 5036SM Installation Overview

1. Measure an existing work belt from buckle end to the most used hole to find belt size.
2. Wear over normal work clothes and note the hole used for fastening.
3. Select Small size if your measured midpoint is about 34 in.
4. Assemble components on the belt in your preferred hand specific layout.

Occidental Leather 5022 Key Features

• Top-grain leather construction for comfort and durability
• Non-marring surface helps prevent floor scuffs
• High-density padding with inner plastic shield minimizes pressure points
• Quick release fasteners for easy on and off
• Made in the USA

Occidental Leather 5022 Applications

• Interior remodeling and finish work
• Flooring installation without scuffing surfaces
• General jobsite knee protection

Occidental Leather 5022 Installation Overview

1. Place pads over knees with curved edge down.
2. Secure quick release buckles and straps.
3. Adjust for snug, comfortable fit; avoid overtightening.
4. Verify pads do not shift during movement.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather 8567 Key Features

• Right-hand layout
• Fits a 3 in belt
• Hybrid construction: industrial nylon body with leather reinforcement
• 4 pockets and holders for drill, bits, and small tools
• Compatible with select Bosch, Hitachi, Makita, and Milwaukee compact drills and drivers
• Made in USA

Occidental Leather 8567 Applications

• Hands-free carry of cordless drills and impact drivers
• Bit and small fastener organization on the belt
• Framing, punch-out, and general construction tasks

Occidental Leather 8567 Installation Overview

1. Slide the holster onto a work belt up to 3 inches wide.
2. Secure the leather strap/snaps as designed.
3. Place the drill or driver in the main pocket.
4. Store bits and small tools in the exterior sleeves.

Occidental Leather 9008 Key Features

• High density cushion technology for hip comfort
• Light weight pads retrofit quickly to existing belt sets
• Accepts any bag up to 7.5 in wide
• Does not accommodate the 5525 Big Oxy Fastener Bag or B5611 Green Building Fastener Bag
• Made in the USA

Occidental Leather 9008 Applications

• Increase hip comfort on heavy tool belt setups
• Retrofit comfort upgrade for existing Occidental or other belt worn systems
• Use with compatible tool bags up to 7.5 in wide

Occidental Leather 9008 Installation Overview

1. Remove tool bags from your belt.
2. Slide a Hip Buddy onto each side of the belt at the hip locations.
3. Reinstall tool bags ensuring each is 7.5 in wide or less.
4. Adjust position for comfort and secure all attachments.

Key Features

• Upright storage with 3 internal compartments for quick access
• 45 pockets and tool holders for organized carry
• All-leather main body with water-resistant rubber base
• Handcrafted leather handle that molds to your grip
• D-rings for shoulder strap attachment (strap not included)

Applications

• Carpentry and finish work tool organization
• Jobsite transport of hand tools, fasteners, and accessories
• Shop or service vehicle tool storage

Installation Overview

1. Attach clip-on accessories to exterior mounting points as needed.
2. Organize tools within the three compartments and outer pockets.
3. Secure small parts in the side zip pouch and tool shields.
4. Connect a compatible shoulder strap to D-rings if desired.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather 5057 Features

• 4 pocket layout keeps small tools separated and easy to grab
• Premium leather construction with reinforced stitching
• In pocket carry or snap loop for belt use
• Fits most belts up to 2.5 inches wide
• Lightweight, compact design for everyday tasks
• Made in USA

Occidental Leather 5057 Applications

• Small repairs and service calls
• Electrical and shop maintenance
• Gardening and farm upkeep
• Cabinet and finish work

Occidental Leather 5057 Installation Overview

1. Load tools into the four pockets as needed.
2. Place the caddy in a front or rear pocket, or
3. Attach via the snap loop to a belt up to 2.5 inches wide.
4. Adjust position for comfortable access and secure carry.

Occidental Leather 5010 Features

• 1 inch wide leather loop supports a safety release snap
• Ideal for saw keys, small wrenches, and similar items
• Keeps frequently used tools within easy reach
• Durable leather construction
• Made in USA

Occidental Leather 5010 Applications

• Hang keys, small wrenches, and accessories from a belt or bag
• Add quick access clip point to tool belts or pouches
• Organize frequently used small tools on the jobsite

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt, strap, or D ring.
2. Secure the loop so the snap hangs freely.
3. Clip keys or small tools to the safety release snap.
4. Verify the snap opens and closes smoothly before use.

Occidental Leather 5585 Key Features

• Divided upright interior — 16 screwdriver loops and 9 center compartments
• Exterior storage — 6 outside pockets and 6 outside tool loops
• Rugged build — heavy lock-stitched nylon thread and reinforced bottom
• Leather luggage-style handle for comfortable carry
• Steel Dee hardware for optional shoulder strap
• Includes snap clip and location strap for clip-on items
• Made in the USA

Occidental Leather 5585 Applications

• Organizing and transporting hand tools on the jobsite
• Electrician, maintenance, and service technician tool carry
• Workshop storage for frequently used tools and fasteners
• Clip-on accessory expansion with included 9501 bag and Tool Shields

Occidental Leather 5585 Installation Overview

1. Load tools into divided interior and loops for balanced weight.
2. Attach 9501 clip-on bag and Tool Shields to desired locations.
3. Use the leather handle for carry; add a shoulder strap to Dee rings if desired.
4. Inspect rivets and stitching periodically to ensure secure carry.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 5518 Features

• Long sleeve style keeps tools upright and close to the body
• Reduces tool swing to avoid knee capping
• Heavy duty full leather construction
• Fits belts up to 3 in wide
• Made in the USA

Occidental Leather 5518 Applications

• Carry and secure framing or finish hammers
• Holster for hammer tackers on the jobsite
• Flat bar storage up to 1-5/8 in diameter
• Reduce tool sway while climbing or walking
• Add a hammer sleeve to any 3 in belt

Occidental Leather 5518 Installation Overview

1. Slide the holder onto a work belt up to 3 in wide.
2. Position the sleeve where the tool is easy to reach.
3. Insert the hammer, tacker, or flat bar handle into the sleeve.
4. Confirm the tool sits securely and does not swing.
5. Tighten belt as needed for stable carry.

Occidental Leather 5085 Key Features

• 17 pockets and holders for organized storage inside and out
• Divided interior for separated, easy-to-reach tool access
• Quick-release snap and strap for electrical tape
• Holster fits a 35 ft x 1 in tape measure
• Constructed from 8 oz top grain leather; Made in USA
• Tunnel loop fits up to a 3 in work belt

Occidental Leather 5085 Applications

• Organizing hand tools for jobsite or shop use
• Carrying screwdrivers, pliers, knives, chisels, markers, and strippers
• Holding torpedo level, hammer, and tape measure
• Attaching to belts up to 3 in for hands-free access

Occidental Leather 5085 Installation Overview

1. Thread a work belt (up to 3 in wide) through the tunnel loop.
2. Position the case at preferred location on your belt.
3. Load tools into divided pockets for balanced weight.
4. Secure tape to the strap and attach items to the quick-release snap as needed.
5. Verify pockets and snap are closed before use.

Occidental Leather 5031 Key Features

• Belt-worn utility attachment for spring-snap tools
• Fits up to a 3 inch work belt
• 3/4 inch dee ring for secure clipping
• Leather strap construction for durability
• Snap closure secures around belt
• Made in USA

Occidental Leather 5031 Applications

• Carry telephone butt-sets and testers from a belt
• Attach meters, small tools, or lanyards via spring snaps
• Add a quick-access ring point to tool belts
• Organize clip-on accessories for electricians and technicians
• Temporary attachment point for keys or ID holders on the job

Occidental Leather 5031 Installation Overview

1. Open the strap and place it around your work belt.
2. Position the dee ring where you want access.
3. Snap the closure to secure the strap to the belt.
4. Attach the spring snap from your tool or lanyard to the dee ring.
5. Confirm the snap and ring are fully engaged before use.