Occidental Leather Hammer & Tape Measure Holders

High Mount Hammer Holder Key Features

• High-mount profile reduces hammer swing
• 10 oz full-grain belting leather construction
• Heavy-duty 2.5 inch steel loop fits most hammers
• Fits work belts up to 3 inches wide
• Compact, comfortable carry; Made in the USA

High Mount Hammer Holder Applications

• Framing and roofing tasks
• Overhead work and ladder use
• Tight-space maneuvering
• General jobsite tool belt organization

High Mount Hammer Holder Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position at preferred height for a high-mount carry.
3. Insert hammer through the 2.5 inch steel loop.
4. Verify secure fit and comfortable clearance while moving.

Occidental Leather 5012 Features

• Dual-layer 12 oz leather construction with steel hardware
• Plated steel rivets and stitched leather back for durability
• Reinforced steel loop accommodates most standard hammers
• Fits belts up to 3 inches wide
• Made in USA

Occidental Leather 5012 Applications

• Framing and general carpentry
• Roofing tasks requiring quick hammer access
• Sheet metal and rigging tool carry
• Daily construction work belt organization

Occidental Leather 5012 Installation Overview

1. Thread work belt through the two slots on the holder.
2. Position at preferred location on the belt.
3. Ensure the steel loop faces outward for easy tool access.
4. Insert hammer and check for secure, minimal movement.

Occidental Leather 5037 Key Features

• High mount design keeps tape measure secure and accessible
• Top grain leather construction for durability
• Holds up to a 35 ft tape or FatMax
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5037 Applications

• Carrying and securing a tape measure on a work belt
• Framing, carpentry, and general construction tasks
• Remodeling and finish work where fast tape access is needed

Occidental Leather 5037 Installation Overview

1. Thread the holder onto your work belt (up to 3 in wide).
2. Position at preferred height for access.
3. Insert tape measure into pocket with clip facing outward.
4. Verify snug fit and comfortable reach before use.

Occidental Leather 5020 Key Features

• Two tools, one footprint for belt space efficiency
• Slides easily onto standard tool belts
• 12 oz English bridle leather construction for durability
• Purpose built for pros and DIY users
• Made in USA

Occidental Leather 5020 Applications

• Carry a hammer and pliers or similar hand tool at the ready
• Carpentry and framing work on site
• General construction and remodel tasks
• Workshop and home project tool carry

Occidental Leather 5020 Installation Overview

1. Thread the holder loop onto your work belt.
2. Position at the preferred hip location.
3. Insert hammer into the metal loop.
4. Place a hand tool into the leather pocket.
5. Check clearance and adjust belt position for comfort.

Occidental Leather 5523 Key Features

• 4-in-1 capacity for tape, pencil, crayon or screwdriver, plus sharp tool
• Includes Oxy Tool Shield for chisel, knife, or cutter protection
• Extra heavy duty steel clip fits belts up to 2 in wide
• Sturdy American leather construction for long service life
• Compact clip-on design saves belt space
• Made in USA

Occidental Leather 5523 Applications

• Everyday carry of tape measure and small hand tools
• Safe transport of chisels or knives with the included shield
• Carpentry and trim layout tasks
• General construction and remodeling

Occidental Leather 5523 Installation Overview

1. Slide the steel clip onto a belt up to 2 in wide.
2. Place tape measure in the main pocket.
3. Insert pencil and crayon or screwdriver into their sleeves.
4. Seat sharp tools inside the Oxy Tool Shield.
5. Adjust position on belt for comfort and access.

Occidental Leather 5040 Key Features

• Quality leather and steel construction for durability
• Clip-on design allows quick on and off installation
• Spring steel clip fits belts up to 2 in wide
• Heavy-duty steel loop accommodates most hammers
• Made in USA

Occidental Leather 5040 Applications

• Keep a hammer secured to your belt for fast access
• Ideal for framing, carpentry, and general construction
• Convenient tool carry when working on ladders or overhead

Occidental Leather 5040 Installation Overview

1. Slide the spring clip onto your work belt.
2. Confirm the clip is fully seated and secure.
3. Place the hammer head through the steel loop.
4. Position for comfortable reach and adjust as needed.
5. Lift the clip to remove the holder when finished.

Occidental Leather 5047 Key Features

• Combo layout holds utility knife, two pencils, and a tape measure
• Accepts 35 ft tape or 25 ft FatMax; works as a chalk line holster
• Streamlined, lightweight design for finish work and tight spaces
• Rugged leather construction; riveted for durability
• Fits belts up to 3 inches wide; made in USA

Occidental Leather 5047 Applications

• Finish carpentry and punch list tasks
• Carrying tape, knife, and pencils for quick measurements and marking
• Chalk line holstering for layout work
• Streamlining tool access on compact belt setups

Occidental Leather 5047 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Seat the tape measure in the front pocket; remove the tape clip if needed for proper fit.
3. Allow leather to break in for snug, secure seating.
4. Insert utility knife and two pencils into their sleeves.
5. Verify comfortable placement and retention before use.

Occidental Leather 5137 Key Features

• High mount belt design for better mobility
• Extra Large fit for 35 ft FatMax style tape measures
• Premium durable leather construction
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5137 Applications

• Daily tape measure carry on tool belts
• Framing and layout tasks
• General carpentry and jobsite measuring

Occidental Leather 5137 Installation Overview

1. Slide holster onto a belt up to 3 in wide and position at desired height.
2. Insert tape measure into the holster with the base aligned to the cutout.
3. Confirm secure fit and accessibility before use.

Occidental Leather 5156 Key Features

• Steel cradle style holder for secure hammer carry
• 2 in. belt slot sized for narrow belts
• Steel hardware riveted to extra heavy leather back
• Compatible with 2 in. Leather Work Belt 5002 and Stronghold Beltless rear strap
• Made in the USA

Occidental Leather 5156 Applications

• Secure hammer carry on 2 in. belts
• Framing and carpentry belt setups
• Use with beltless suspenda style rear straps
• General construction and remodeling

Occidental Leather 5156 Installation Overview

1. Thread a 2 in. belt through the two vertical slots.
2. Position holder at desired location on the belt or rear strap.
3. Tighten belt and ensure the holder sits flat against your side.
4. Insert hammer into steel cradle and check for secure fit.

Occidental Leather 5518 Features

• Long sleeve style keeps tools upright and close to the body
• Reduces tool swing to avoid knee capping
• Heavy duty full leather construction
• Fits belts up to 3 in wide
• Made in the USA

Occidental Leather 5518 Applications

• Carry and secure framing or finish hammers
• Holster for hammer tackers on the jobsite
• Flat bar storage up to 1-5/8 in diameter
• Reduce tool sway while climbing or walking
• Add a hammer sleeve to any 3 in belt

Occidental Leather 5518 Installation Overview

1. Slide the holder onto a work belt up to 3 in wide.
2. Position the sleeve where the tool is easy to reach.
3. Insert the hammer, tacker, or flat bar handle into the sleeve.
4. Confirm the tool sits securely and does not swing.
5. Tighten belt as needed for stable carry.

Occidental Leather 5237 Key Features

• High-mount, clip-on design installs without removing your belt
• Sized to fit 35 ft FatMax tape measures
• Proprietary steel belt clip fits belts up to 2 inches wide
• Heirloom-quality leather for long-lasting durability
• Made in USA

Occidental Leather 5237 Applications

• Secure belt carry for 35 ft tape measures on the jobsite
• Fast access measuring for framing, trim, and general carpentry
• Upgrade or replacement holster for tool belts and work pants

Occidental Leather 5237 Installation Overview

1. Slide or clip the steel clip over your belt (up to 2 inches wide).
2. Position the holster high on the belt for reduced swing.
3. Insert the tape measure into the pouch opening until fully seated.
4. Check retention and adjust holster position for comfort.
5. Remove by lifting the clip tab and sliding off the belt.