Occidental Leather Durable Nylon Tool Bags

Occidental Leather 8582 Key Features

• 10 in deep bag with full leather boot for structure and durability
• Leather FatLip mouth holds shape, stays open, and protects against abrasion
• Right-side layout for tools most accessed with the right hand
• 13 total pockets and holders for organized storage
• Made in the USA

Occidental Leather 8582 Applications

• Organizing and carrying hand tools on the jobsite
• Carpentry and framing tool storage
• General construction and remodeling
• Punch list and service work

Occidental Leather 8582 Installation Overview

1. Thread the pouch onto your work belt.
2. Wear on the right side for right-hand access.
3. Load tools into the dedicated pockets and holders.
4. Verify secure fit and balanced weight before use.

Occidental Leather 8018DB Features

• Popular OxyLights configuration with right-hand layout
• Dedicated holders for common hand tools and tape up to 35 ft
• Main bag corners reinforced for durability
• Leather and industrial nylon construction
• Made in the USA

Occidental Leather 9501 Key Features

• Cost efficient fastener management
• Single clip-on design for quick swaps between applications
• Keep multiple pouches preloaded and clipped to your toolbox or truck
• Adds fastener storage or sub divides existing main bags
• Secure steel clip fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9501 Applications

• Add fastener capacity to any belt setup
• Sub-divide larger tool bags for better organization
• Preload pouches for task-specific jobs and swap quickly
• Clip to toolboxes or bags for mobile storage
• Use on belts up to 2 inches wide

Occidental Leather 9501 Installation Overview

1. Load fasteners or small parts into the pouch.
2. Position the steel clip over a belt up to 2 inches wide or onto a toolbox/bag edge.
3. Press firmly to seat the clip securely.
4. Arrange multiple preloaded pouches as needed for the task.
5. Remove and swap pouches when changing applications.

Occidental Leather 9504 Key Features

• Cost efficient organization for small tools and fasteners
• Seven-pocket, multi-pouch design with holders for pencil, utility knife, and angle square
• Heavy-duty clip attaches quickly to belts or waistbands
• Fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9504 Applications

• Small repairs and punch list tasks
• Trim and finish work
• General maintenance rounds
• Weekend DIY projects

Occidental Leather 9504 Installation Overview

1. Load tools and fasteners into main and outer pockets.
2. Clip the pouch to your belt or waistband.
3. Ensure clip is fully engaged; adjust placement for comfort.

Key Features

• 12 pockets and tool holders in a compact, jobsite-efficient layout
• Two-ply foam-core construction maintains structure when empty or loaded
• Clip-on leather tab for tape or accessory pouches
• Steel hammer loop; interior leather tool sleeves
• Right-hand layout; left-hand model available as 9521LH

Applications

• Trim carpentry and finish work
• Light framing tasks
• Cabinetry and punch-list work
• Right-side tool carry for dominant-hand access

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for standard orientation.
3. Attach clip-on leather tab accessories as needed.
4. Insert the Oxy Tool Shield for chisels or knives.
5. Load tools and check balance and access.

Occidental Leather 9503 Key Features

• Angle square holster for quick access
• Single clip-on, large capacity main bag
• Attaches to belts or waistbands for grab-and-go use
• Industrial nylon construction
• Made in USA

Occidental Leather 9503 Applications

• Carry nails, screws, and small hand tools
• Light-duty service calls and punch-list tasks
• DIY and weekend project setups
• Quick add-on storage to existing work belts

Occidental Leather 9503 Installation Overview

1. Clip the pouch onto a belt or waistband.
2. Seat the angle square in the holster slot.
3. Load fasteners or small tools into the main bag.
4. Verify secure attachment before use.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather B9019 Key Features

• Compact single-compartment pouch for fast access
• Padded, double wall industrial nylon for structure and durability
• Lightweight design suited for small jobs or as a third bag
• Slides onto work belts; compatible up to 3 in. belts
• Made in the USA

Occidental Leather B9019 Applications

• Carry fasteners, parts, or small hand tools
• Add-on storage for tool belt systems
• Service calls and light-duty tasks
• Organizing essentials for trim or punch list work

Occidental Leather B9019 Installation Overview

1. Thread the bag onto your work belt (fits up to 3 in.).
2. Position at preferred location for access.
3. Load with small tools, fasteners, or parts.
4. Check balance and adjust as needed on the belt.

Occidental Leather 9025 Key Features

• Compact 6-in-1 design combines pockets and holders
• Padded nylon fastener bag for added capacity
• Holds tape, hammer, knife or chisel, pencils and fasteners
• Space-saving add-on for tool belts or vests
• Ideal for trim, punch list, and small tasks

Occidental Leather 9025 Applications

• Carry essentials for quick service calls
• Trim and finish work where a light setup is needed
• Punch list tasks and small repairs
• Supplemental pouch for tool belts or vests

Occidental Leather 9512 Features

• Tool-specific storage for tape, pad, pens, pencils, screwdriver, utility knife, and pliers
• Accepts work belts up to 2 inches wide
• Industrial 2-ply Cordura fabric with foam core for structure
• Made in the USA

Occidental Leather 9512 Applications

• Punch list jobs and service calls
• Inspections and light-duty tasks
• Field technician essentials carry
• Belt-mounted tool organization

Occidental Leather 9512 Installation Overview

1. Slide the pouch onto a work belt up to 2 inches wide.
2. Position the pouch for comfortable access.
3. Load tools into the dedicated holders.
4. Ensure items are seated securely before use.

Key Features

• Tool side: Five tool slots in main pouch (3 back, 2 front), outside lower pouch with slot, rear tool loop; pencil/utility combo with three small slots and a deep pocket; hammer sleeve
• Fastener side: Speed square slot, lower tool slot, dual outside pouches, slots in each fastener pouch, reinforced bar slot underneath for slim tools
• 1000D CORDURA® nylon with water-repellent finish; USA-made tactical webbing bottom reinforcements
• Contoured padded belt with metal COBRA® buckle for secure, fast adjustment
• Overall bag length approximately 11"; lightweight yet durable build

Applications

• Trim and finish carpentry setups
• Cabinet and door installation
• Punch-list and service work
• Remodeling and general carpentry tasks
• Jobsite tool and fastener organization

Installation Overview

1. Open the COBRA® buckle and position the contoured belt around your waist.
2. Adjust the belt to the desired fit; secure the buckle.
3. Place frequently used tools in the tool-side pouch and fasteners in the fastener-side pouch.
4. Seat the hammer in the sleeve and store narrow tools in the underside bar/webbing slot.
5. Confirm pouches sit comfortably at hip height and re-adjust for balanced load.

Key Features

• Tool side: 5 tool slots in main pouch — three along inside back and two inside front; single outside lower pouch with tool slot; rear tool loop; pencil/utility combo with three small slots and one deep pocket
• Fastener side: 3 elastic nail-set slots in tape pouch; speed square slot; lower tool slot; side-by-side outer pouches; slots in each fastener pouch; reinforced bar slot on bag underside
• Metal COBRA buckles; contoured belt design for secure fit
• American-made foam, tactical webbing, military-grade hardware, and heavyweight thread
• 1000 Denier CORDURA® nylon with water-repellent coating; reinforced pouch bottoms for puncture & abrasion resistance
• Padded hammer sleeve on the tool side; lightweight and durable

Applications

• General carpentry and remodeling
• Framing tasks requiring high-capacity fastener storage
• Finish work with organized tool access
• Jobsite setup needing durable, water-repellent nylon gear
• Daily use across multiple trades

Installation Overview

1. Select the medium size and position the contoured belt pad around your waist.
2. Secure the metal COBRA buckle and adjust the webbing for a snug fit.
3. Arrange tool and fastener bags to your dominant/non-dominant sides.
4. Load pouches and slots with tools, fasteners, and a hammer in the padded sleeve.
5. Verify balance and comfort; re-adjust belt tension as needed.

Occidental Leather 461010 M Features

• Tool side layout: 5 main tool slots, outside lower pouch with tool slot, rear tool loop, front pencil and utility organizer
• Fastener side layout: tape pouch with 3 elastic nail set slots, speed square slot, lower tool slot, dual outer pouches, and additional internal slots
• Contoured belt with metal COBRA buckle for fast, secure closure
• 1000 denier Cordura nylon with water repellent coating
• Reinforced pouch bottoms with tactical webbing for puncture and abrasion resistance
• Padded hammer sleeve on the tool side
• Lightweight, tough construction with military grade webbings and hardware

Occidental Leather 461010 M Applications

• General carpentry from framing through finish tasks
• Organized carry of hand tools, fasteners, and measuring tools
• Jobsite use where a durable, water repellent tool belt is required
• Trades that need balanced tool and fastener storage

Occidental Leather 461010 M Installation Overview

1. Adjust the belt to your waist size and secure the COBRA buckle.
2. Position tool and fastener bags on the preferred sides.
3. Load tools and fasteners into dedicated slots and pouches.
4. Place hammer in the padded sleeve and check balance and comfort.

Occidental Leather 461010 LG Key Features

• 1000 denier Cordura nylon with water repellent coating
• Metal COBRA buckle for secure, quick fastening
• Reinforced pouch bottoms with USA made tactical webbing
• Tool side: 5 main tool slots, lower outer pouch, rear tool loop
• Pencil/utility combo with three small slots and deep pocket
• Fastener side: elastic nail set slots, speed square and lower tool slots
• Dual outer pouches and slots in each fastener pouch
• Padded hammer sleeve on tool side
• Lightweight yet abrasion resistant materials
• Made in USA components and construction

Occidental Leather 461010 LG Applications

• General carpentry and daily jobsite tasks
• Framing work requiring fast access to tools and fasteners
• Finish and trim carpentry organization
• Remodeling and construction punch list work
• Measuring, layout and fastening operations

Occidental Leather 461010 LG Installation Overview

1. Size the belt to your waist and position the padded section for comfort.
2. Secure the COBRA buckle and confirm a snug fit.
3. Arrange tool and fastener bags on dominant and non-dominant sides.
4. Load tools and fasteners into designated pockets and sleeves.
5. Make final adjustments for balance and easy access before work.

Key Features

• Tool side: 5 tool slots in main pouch (3 rear, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo with 3 small slots and one deep pocket
• Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, side-by-side outer pouches, slots in each fastener pouch, reinforced bar slot under bag
• Metal COBRA buckle; contoured padded belt for comfort
• 1000D CORDURA® nylon with water-repellent finish; USA-made foam and tactical webbing reinforcements
• Hammer sleeve on tool side; lightweight yet highly durable construction

Applications

• General carpentry and remodeling
• Framing tasks requiring fastener and tool organization
• Finish work where quick access to small tools is needed
• Jobsite tool and fastener carry for multi-trade use

Installation Overview

1. Measure at belt height to confirm Large size (fits 42"–46").
2. Adjust the padded belt and secure the metal COBRA buckle.
3. Load dominant-side pouch with hand tools; stock fasteners in the opposite pouch.
4. Place speed square, tape, and nail sets in designated slots.
5. Use hammer sleeve and rear loops to secure long-handled tools.

Key Features

• Tool side: 5 tool slots in main pouch (3 along back, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo up front with three small slots and one deep pocket
• Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, dual outside pouches, slots in each fastener pouch, reinforced bar slot underneath
• Contoured belt with Austrian-made metal COBRA® buckle
• American-made foam, military-grade tactical webbing and hardware; heavyweight thread
• 1000 Denier CORDURA® Nylon with water-repellent coating; reinforced pouch bottoms for puncture and abrasion resistance
• Padded hammer sleeve on tool side; lightweight yet rugged construction

Applications

• General carpentry and remodeling
• Framing and rough-in tasks
• Finish work and trim installation
• Jobsite tool and fastener organization
• Multi-trade construction tasks requiring mobility

Installation Overview

1. Select the correct size and place the contoured belt at waist/hips.
2. Position tool and fastener pouches to dominant and non-dominant sides.
3. Secure the COBRA® buckle and snug the belt for a comfortable fit.
4. Load tools and fasteners into designated slots and pouches.
5. Fine-tune belt and pouch placement for balance and access.

Occidental Leather G9019 Key Features

• Compact single-compartment layout for quick access
• Padded, double-wall nylon adds structure and durability
• Lightweight design for comfortable all-day wear
• Great as a third bag or for small jobs
• Made in the USA

Occidental Leather G9019 Applications

• Extra storage on a tool belt for fasteners or small parts
• Light-duty service and punch-list tasks
• Add-on third bag for flexible belt setups
• General utility carrying on the jobsite

Occidental Leather G9019 Installation Overview

1. Slide the bag onto your work belt through the rear loop.
2. Position at the preferred location for access and balance.
3. Load with small tools or fasteners and confirm a secure fit.