Sort by:
Occidental Leather 8581 Description
FatLip Fastener Bag built with a 10 in deep main pocket, a full leather boot, and a leather-reinforced FatLip mouth that keeps the bag open and abrasion resistant. Features a patented 2-in-1 outer bag with integrated angle square holster plus sleeves for tri-square, cat's paw, and driver bits. Worn on the left side for right-handed users. Made in the USA.
Occidental Leather 8581 Includes
- (1) FatLip Fastener Bag 8581
Occidental Leather 8581 Key Features
- FatLip leather mouth keeps the bag formed, open, and protected from abrasion
- Full leather boot for long-term durability
- Patented 2-in-1 outer bag with built-in angle square holster
- Dedicated sleeves and pouches for tri-square, cat's paw, nail sets, and driver bits
- Accepts belts up to 3 in wide
- Made in the USA
Occidental Leather 8581 Applications
- Carrying nails, screws, and common fasteners
- Organization for angle square, tri-square, and layout tools
- Holstering cat's paw and driver bits for framing and drywall tasks
- General construction use on the non-dominant side
Occidental Leather 8581 Installation Overview
- Slide the bag onto a work belt up to 3 in wide.
- Wear on the left side for right-handed setups.
- Load fasteners and tools into main and outer compartments.
- Seat the angle square in the built-in holster and secure small bits in dedicated pouches.
- Verify comfortable position and accessibility before work.
Occidental Leather 8581 Specifications
| Pockets and Holders | 10 |
| Main Bag | 10 in x 10 in |
| Outer Bag | 9 in x 6 in |
| Upper Bag | 5 in x 4.5 in |
| Weight | 1.7 lb |
| Materials | Industrial nylon with leather boot and trim |
| Belt Compatibility | Up to 3 in wide |
| Color | Black |
| Country of Origin | USA |
Occidental Leather 8062 Description
The OxyLights 4 Pouch Fastener Bag adds an extra outer pouch to the classic 8060 layout for increased organization. It provides 10 total pockets and tool holders with dedicated spots for squares, driver bits, and cat's paws, and is designed to be worn on the non dominant side for efficient access during framing and general carpentry. Made in USA.
Occidental Leather 8062 Includes
- (1) 8062 OxyLights 4 Pouch Fastener Bag
Occidental Leather 8062 Features
- 4 pouch layout with main, middle, outer, and upper bags
- 10 total pockets and tool holders
- Dedicated holders for blade square, angle square, cat's paw, and driver bits
- Streamlined profile for compact, efficient storage
- Designed to be worn on the left side for right handed users; left handed option available
- Made in USA
Occidental Leather 8062 Applications
- Framing tasks requiring quick access to fasteners and layout tools
- General carpentry where compact, organized storage is preferred
- Keeping squares, bits, and cat's paw readily accessible on the non dominant side
Occidental Leather 8062 Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 in x 8 in |
| Middle Bag | 8 in x 6 in |
| Outer Bag | 5.5 in x 5.5 in |
| Upper Bag | 4.5 in x 4.5 in |
| Weight | 1.3 lbs |
| Made In | USA |
| Handedness | Right handed 8062; Left handed 8062LH |
NOTE: Wear on the left side for right handed use; select the left handed 8062LH variant for left side dominance.
Occidental Leather 9520 Oxy Finisher Fastener Bag Description
Lightweight and compact, this reinforced nylon fastener bag is purpose built for trim, framing, and finish work. It features round bottom main and outer pouches that keep their shape, a patented 2 in 1 outer bag for added capacity, and built in holders for nail sets, driver bits, a cat paw, and a speed square. Includes an Oxy Tool Shield for safe storage of sharp tools. Made in USA.
Occidental Leather 9520 Includes
- (1) OxyFinisher Fastener Bag
- (1) Oxy Tool Shield
Occidental Leather 9520 Key Features
- Compact 2 in 1 design adds fastener capacity without extra bulk
- Round bottom nylon pouches hold shape and resist collapse
- Speed square slot for inside or outside carry
- Includes Oxy Tool Shield for sharp tool protection
- 11 total pockets and tool holders
- Available in right or left hand layouts
- Made in USA
Occidental Leather 9520 Applications
- Trim carpentry and finish installations
- General framing and layout tasks
- Organizing fasteners, bits, and small tools
- Speed square carry and quick measurement access
Occidental Leather 9520 Installation Overview
- Slide the pouch onto a compatible work belt.
- Choose left or right hand layout to match your setup.
- Place fasteners in the main and outer bags; organize small tools in holders.
- Insert sharp tools into the Oxy Tool Shield.
- Seat the speed square in the dedicated slot for quick access.
Occidental Leather 9520 Specifications
| Pockets and Tool Holders | 11 |
| Main Bag | 9.5 in W x 7.5 in H |
| Outer Bag | 9 in W x 6 in H |
| Weight | 1.0 lb |
| Material | Reinforced nylon with leather reinforcements |
| Handedness | Right hand 9520, Left hand 9520LH |
| Country of Manufacture | USA |
Occidental Leather 8583 Heritage FatLip Fastener Bag Description
A rugged fastener pouch built for durability and access. The 10 in deep main bag pairs industrial nylon with a full leather boot, while the distinctive FatLip leather mouth holds its shape, stays open, and resists abrasion. A patented 2-in-1 outer bag integrates an angle square holster, with added sleeves and loops for essential small tools.
Occidental Leather 8583 Includes
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8583 Key Features
- FatLip leather mouth keeps the bag open and protected
- Full leather boot for long-term durability
- Patented 2-in-1 outer bag with built-in angle square holster
- Tri-square sleeve, cat's paw loop, and external pouches for nail sets or driver bits
- Designed as the left-side fastener bag for right-handed setups; left-handed version available as 8583LH
- Made in USA
Occidental Leather 8583 Applications
- Framing and structural carpentry fastener storage
- Drywall and general construction small tool organization
- Quick-access holster for angle squares on the jobsite
- Left-side carry for right-handed belt systems
Occidental Leather 8583 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 10 in W x 10 in H |
| Outer Bag | 9 in W x 6 in H |
| Upper Bag | 5 in W x 4.5 in H |
| Weight | 1.7 lb |
| Material | Industrial nylon with leather FatLip mouth and full leather boot |
| UPC | 759244282009 |
| Country of Origin | USA |
| Color | Hunter Green |
Occidental Leather 8060 Description
The OxyLights 3 Pouch Fastener Bag is a lightweight, organized pouch designed for framing and general carpentry. It features dedicated holders for a 1" blade square, angle square, cat's paw, and driver bits, keeping fasteners and layout tools accessible on the left side.
Occidental Leather 8060 Includes
- (1) OxyLights 3 Pouch Fastener Bag
Occidental Leather 8060 Features
- 3-pouch layout for fasteners and small tools
- Tool-specific holders for blade square, angle square, cat's paw, and bits
- Lightweight OxyLights construction with leather reinforcements
- Optimized for framing and general carpentry
- Made in USA
Occidental Leather 8060 Applications
- Framing: Keep nails, layout square, and bits at hand
- General Carpentry: Organized storage for everyday fasteners
- Layout Work: Dedicated blade square and angle square holders
- Punch list tasks: Compact carry of small tools and hardware
Occidental Leather 8060 Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for right-handed setups or per preference.
- Load fasteners and layout tools into the main, outer, and upper pouches.
- Use dedicated holders for blade square, angle square, bits, and cat's paw.
- Check balance and retention before starting work.
Occidental Leather 8060 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.2 lbs |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Industrial nylon with leather reinforcements |
| Country of Origin | USA |
Occidental Leather 5564 Description
Hybrid fastener bag combining an all leather main pouch with a divided industrial nylon outer pouch. Provides six tool holders and four total pouches with ample capacity for wire nuts, conduit couplers, and small fittings. Designed to be worn on the left side for quick access with the non dominant hand. Made in USA.
Occidental Leather 5564 Includes
- (1) Bag
Occidental Leather 5564 Key Features
- All leather main bag with divided nylon double outer pouch
- Six black leather tool holders; four pouches total
- Optimized for wire nuts, couplers, and small fasteners
- Left side wear for fast access with the left hand
- Full grain leather and industrial nylon construction
Occidental Leather 5564 Applications
- Organizing and carrying fasteners and small parts
- Keeping layout and marking tools at hand
- Electrical and mechanical fittings storage
- Daily jobsite use with hybrid leather and nylon durability
Occidental Leather 5564 Installation Overview
- Slide the belt loop over your work belt.
- Position on the left side for non dominant hand access.
- Distribute tools and fasteners among the divided pouches.
- Secure frequently used layout tools in the leather holders.
Occidental Leather 5564 Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 x 7.5 in |
| Outer Bag | 8 x 6 in |
| Upper Bag | 4.5 x 4.5 in |
| Material | Full grain leather main bag; industrial nylon divided outer pouch |
| Hand Orientation | Left side wear |
| Weight | 1.8 lb |
| Country of Origin | USA |
Occidental Leather B8064 Description
The OxyLights Fastener Bag with Double Outer Bag delivers compact, high-capacity organization for framing and general carpentry. A unique patented 2-in-1 outer pouch integrates an angle square holster between the main and outer compartments, with dedicated sleeves for tri-square, cat's paw, nail sets, and driver bits. Designed to be worn on the left side for right-handed setups. Made in USA.
Occidental Leather B8064 Includes
- (1) OxyLights Fastener Bag with Double Outer Bag
Occidental Leather B8064 Features
- Patented 2-in-1 outer pouch with angle square holster
- Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
- Four-bag layout for layered storage
- Holds fasteners and tools commonly accessed with the left hand
- Made in USA
Occidental Leather B8064 Applications
- Framing: Keep nails, square, and layout tools organized
- General carpentry: Quick access to bits, nail sets, and cat's paw
- Layout work: Integrated angle square holster for fast measurement
- Jobsite organization: Layered pouches separate fasteners and small tools
Occidental Leather B8064 Installation Overview
- Select right- or left-handed variant to match your setup.
- Slide the bag onto a compatible work belt and secure.
- Position fastener bag on the left side for right-handed users; right side for left-handed users.
- Load fasteners and layout tools into the designated sleeves and pouches.
- Verify comfortable reach and adjust placement as needed.
Occidental Leather B8064 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Leather/Nylon |
| Made In | USA |
| Handed Variants | B8064 Right-handed, B8064LH Left-handed |
NOTE: Choose the correct handed variant to align with your tool belt layout
Occidental Leather 8552 Description
Built for quick access and durability, the Oxy Pro Pouch Medium clips to your belt with a 2 inch metal clip and secures contents with a drawstring top. Dual layer 1000D nylon sides and a 1050D nylon bottom stand up to harsh jobsite wear. Sized at 6 in diameter by 7 in high and made in the USA.
Occidental Leather 8552 Includes
- (1) Oxy Pro Pouch, Medium - Green
Occidental Leather 8552 Key Features
- 2 inch belt clip for fast on off attachment
- Drawstring closure keeps contents secure yet accessible
- Dual layer 1000D nylon sides and 1050D nylon bottom for wear resistance
- Medium size: 6 in diameter x 7 in high
- Made in the USA
Occidental Leather 8552 Applications
- Carry fasteners, anchors, and small hardware
- Quick access storage for bits and small hand tools
- Add on pouch for tool belts and vests
- Jobsite organization for installers and carpenters
Occidental Leather 8552 Installation Overview
- Slide the 2 inch clip over your belt, pocket, or strap.
- Load hardware or tools into the pouch.
- Cinch the drawstring to secure contents.
- Release the clip to reposition or remove as needed.
Occidental Leather 8552 Specifications
| Size | Medium |
| Color | Green |
| Dimensions | 6 in diameter x 7 in high |
| Material - Sides | Dual layer 1000D nylon |
| Material - Bottom | Dual layer 1050D nylon |
| Closure | Drawstring |
| Belt Clip | 2 inch metal clip |
| Made In | USA |
| UPC | 759244388909 |
| Model | 8552 |
Occidental Leather 5018DBLH Left Handed 3 Pouch Pro Tool Bag with Tape Measure Pouch
Occidental Leather 5018DBLH Left Handed 3 Pouch Pro Tool Bag with Tape Measure Pouch
Occidental Leather 5018DBLH Description
Left handed 3 pouch professional leather tool bag with double outer bags, dedicated holders for common hand tools, and a built in tape measure holster sized for tapes up to 35 ft.
Occidental Leather 5018DBLH Includes
- (1) Left Handed 3 Pouch Pro Tool Bag
Occidental Leather 5018DBLH Key Features
- Double outer bag design for organized storage
- Holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
- Integrated tape holster fits tapes up to 35 ft
- Left handed layout worn on the left side
- Premium leather construction
Occidental Leather 5018DBLH Applications
- Daily carry of hand tools on the jobsite
- Framing and carpentry tool organization
- Finish work where quick access to small tools is needed
- Measuring and marking with onboard tape and pencil holders
Occidental Leather 5018DBLH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for left handed access.
- Secure the tape measure in the holster.
- Load essential tools into designated pockets and holders.
- Confirm balanced weight and comfortable reach before use.
Occidental Leather 5018DBLH Specifications
| Pockets and Tool Holders | 11 |
| Main Bag | 9 in x 8 in |
| Outer Bag | 5 in x 5.5 in |
| Handedness | Left handed |
| Material | Leather |
| Country of Origin | United States |
Occidental Leather B8551 Description
Compact Oxy Pro Pouch engineered for quick access and durability. A 2-inch belt clip allows fast attach and release, while a drawstring closure secures contents. Built with dual-layer 1000D nylon sides and a rugged 1050D nylon bottom for long service on tough jobsites. Size Small measuring 5 in diameter x 6 in high. Made in the USA.
Occidental Leather B8551 Includes
- (1) Oxy Pro Pouch, Small - Black
Occidental Leather B8551 Features
- 2-inch belt clip for quick attachment and removal
- Drawstring top keeps fasteners and small tools secure
- Dual-layer 1000D nylon sides with 1050D nylon bottom
- Small size: 5 in diameter x 6 in high; color: black
- Proudly made in the USA
Occidental Leather B8551 Applications
- Carry nails, screws, and small fasteners
- Store small hand tools and accessories
- Quick-grab pouch for trim and finish tasks
- Add-on storage for tool belts and work vests
Occidental Leather B8551 Installation Overview
- Slide or clip the pouch onto a work belt using the 2-inch belt clip.
- Load fasteners or small tools into the pouch.
- Cinch the drawstring to secure contents.
- Adjust pouch position for comfortable reach.
Occidental Leather B8551 Specifications
| Size | Small |
| Color | Black |
| Dimensions | 5 in diameter x 6 in high |
| Material | Dual-layer 1000D nylon sides; 1050D nylon bottom |
| Belt Clip Size | 2 in |
| Country of Origin | USA |
| UPC | 759244388503 |
Occidental Leather 462020 M Sawdust Sage Trimmer Set — Medium
A streamlined Trimmer Set built for comfort and efficiency. Constructed from 1000 Denier CORDURA® nylon with water-repellent coating and reinforced with USA-made tactical webbing for puncture and abrasion resistance. Includes a contoured belt with metal COBRA® buckle and thoughtfully organized tool and fastener pouches.
Includes
- (1) Trimmer Tool Bag Set (Sawdust Sage, Medium)
Key Features
- Tool side: Five tool slots in main pouch (3 back, 2 front), outside lower pouch with slot, rear tool loop; pencil/utility combo with three small slots and a deep pocket; hammer sleeve
- Fastener side: Speed square slot, lower tool slot, dual outside pouches, slots in each fastener pouch, reinforced bar slot underneath for slim tools
- 1000D CORDURA® nylon with water-repellent finish; USA-made tactical webbing bottom reinforcements
- Contoured padded belt with metal COBRA® buckle for secure, fast adjustment
- Overall bag length approximately 11"; lightweight yet durable build
Applications
- Trim and finish carpentry setups
- Cabinet and door installation
- Punch-list and service work
- Remodeling and general carpentry tasks
- Jobsite tool and fastener organization
Installation Overview
- Open the COBRA® buckle and position the contoured belt around your waist.
- Adjust the belt to the desired fit; secure the buckle.
- Place frequently used tools in the tool-side pouch and fasteners in the fastener-side pouch.
- Seat the hammer in the sleeve and store narrow tools in the underside bar/webbing slot.
- Confirm pouches sit comfortably at hip height and re-adjust for balanced load.
Specifications
| Model | 462020 M |
| Type | Trimmer Set |
| Size | Medium |
| Color | Sawdust Sage |
| Material | 1000D CORDURA® nylon with water-repellent coating |
| Padded Portion of Belt | 33" (84 cm) |
| Fits Waist Size | Approx. mid-30s range (see sizing notes) |
| Tool/Bag Length | Approximately 11" |
| Buckle | Metal COBRA® |
| Country of Manufacture | USA (buckle foreign-made) |
Occidental Leather 461020 M Description
The Carpenter Set is a versatile nylon tool belt system built for efficiency and comfort from framing through finish work. Constructed with 1000 Denier CORDURA® nylon and military-grade webbing, this medium-size set features a contoured belt with metal COBRA buckles, dedicated tool and fastener sides, and a padded hammer sleeve.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch — three along inside back and two inside front; single outside lower pouch with tool slot; rear tool loop; pencil/utility combo with three small slots and one deep pocket
- Fastener side: 3 elastic nail-set slots in tape pouch; speed square slot; lower tool slot; side-by-side outer pouches; slots in each fastener pouch; reinforced bar slot on bag underside
- Metal COBRA buckles; contoured belt design for secure fit
- American-made foam, tactical webbing, military-grade hardware, and heavyweight thread
- 1000 Denier CORDURA® nylon with water-repellent coating; reinforced pouch bottoms for puncture & abrasion resistance
- Padded hammer sleeve on the tool side; lightweight and durable
Applications
- General carpentry and remodeling
- Framing tasks requiring high-capacity fastener storage
- Finish work with organized tool access
- Jobsite setup needing durable, water-repellent nylon gear
- Daily use across multiple trades
Installation Overview
- Select the medium size and position the contoured belt pad around your waist.
- Secure the metal COBRA buckle and adjust the webbing for a snug fit.
- Arrange tool and fastener bags to your dominant/non-dominant sides.
- Load pouches and slots with tools, fasteners, and a hammer in the padded sleeve.
- Verify balance and comfort; re-adjust belt tension as needed.
Specifications
| Size | Medium |
| Padded Portion of Belt | 33" (84 cm) |
| Belt Height Measurement | 34" – 38" (86 – 96 cm) |
| Color | Sawdust Sage |
| Type | Carpenter Set |
| Material | 1000D CORDURA® nylon with water-repellent coating |
| Buckle | Metal COBRA |
| Country of Origin | USA |
| Weight | 0.15 lbs |
Occidental Leather 461010 M Description
The Gunmetal Grey Carpenter Set in size Medium combines a contoured belt with a metal COBRA buckle and rugged 1000 denier Cordura nylon pouches. Purpose built for carpentry, it features organized tool and fastener storage, reinforced pouch bottoms for durability, and a padded hammer sleeve to keep essentials secure and accessible.
Occidental Leather 461010 M Includes
- (1) Carpenter Tool Belt Set
Occidental Leather 461010 M Features
- Tool side layout: 5 main tool slots, outside lower pouch with tool slot, rear tool loop, front pencil and utility organizer
- Fastener side layout: tape pouch with 3 elastic nail set slots, speed square slot, lower tool slot, dual outer pouches, and additional internal slots
- Contoured belt with metal COBRA buckle for fast, secure closure
- 1000 denier Cordura nylon with water repellent coating
- Reinforced pouch bottoms with tactical webbing for puncture and abrasion resistance
- Padded hammer sleeve on the tool side
- Lightweight, tough construction with military grade webbings and hardware
Occidental Leather 461010 M Applications
- General carpentry from framing through finish tasks
- Organized carry of hand tools, fasteners, and measuring tools
- Jobsite use where a durable, water repellent tool belt is required
- Trades that need balanced tool and fastener storage
Occidental Leather 461010 M Installation Overview
- Adjust the belt to your waist size and secure the COBRA buckle.
- Position tool and fastener bags on the preferred sides.
- Load tools and fasteners into dedicated slots and pouches.
- Place hammer in the padded sleeve and check balance and comfort.
Occidental Leather 461010 M Specifications
| Brand | Occidental Leather |
| Model | 461010 M |
| Type | Carpenter Set |
| Color | Gunmetal Grey |
| Size | Medium |
| Padded Portion of Belt Size | 33 in |
| Belt Height | 34 in - 38 in |
| Material | 1000 denier Cordura nylon with water repellent coating; military grade webbings and hardware |
| UPC | 759244330809 |
Occidental Leather 461010 LG Description
Gunmetal Grey Carpenter Set built from 1000 denier Cordura nylon with water repellent coating. Features Austrian metal COBRA buckles, American made foam and tactical webbing reinforcements, plus a padded hammer sleeve. Tool side provides 5 tool slots and organized pencil/utility pockets. Fastener side includes tape pouch with elastic nail set slots, speed square slot, lower tool slot, and dual outer pouches. Designed for efficiency, durability and comfort.
Occidental Leather 461010 LG Includes
- (1) Carpenter Tool Belt Set
Occidental Leather 461010 LG Key Features
- 1000 denier Cordura nylon with water repellent coating
- Metal COBRA buckle for secure, quick fastening
- Reinforced pouch bottoms with USA made tactical webbing
- Tool side: 5 main tool slots, lower outer pouch, rear tool loop
- Pencil/utility combo with three small slots and deep pocket
- Fastener side: elastic nail set slots, speed square and lower tool slots
- Dual outer pouches and slots in each fastener pouch
- Padded hammer sleeve on tool side
- Lightweight yet abrasion resistant materials
- Made in USA components and construction
Occidental Leather 461010 LG Applications
- General carpentry and daily jobsite tasks
- Framing work requiring fast access to tools and fasteners
- Finish and trim carpentry organization
- Remodeling and construction punch list work
- Measuring, layout and fastening operations
Occidental Leather 461010 LG Installation Overview
- Size the belt to your waist and position the padded section for comfort.
- Secure the COBRA buckle and confirm a snug fit.
- Arrange tool and fastener bags on dominant and non-dominant sides.
- Load tools and fasteners into designated pockets and sleeves.
- Make final adjustments for balance and easy access before work.
Occidental Leather 461010 LG Specifications
| Type | Carpenter Set |
| Size | Large |
| Color | Gunmetal Grey |
| Material | 1000 denier Cordura nylon, water repellent |
| Weight | 3.5 lb (approx. 1572 g) |
Occidental Leather 461020 LG Sawdust Sage Carpenter Set Description
A versatile carpenter tool belt set in Sawdust Sage built from 1000 Denier CORDURA® nylon with water-repellent coating and rugged tactical webbing reinforcements. Features a metal COBRA buckle, padded contoured belt, and thoughtfully organized tool and fastener pouches for efficient workflow from framing through finish work. Size: Large.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch (3 rear, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo with 3 small slots and one deep pocket
- Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, side-by-side outer pouches, slots in each fastener pouch, reinforced bar slot under bag
- Metal COBRA buckle; contoured padded belt for comfort
- 1000D CORDURA® nylon with water-repellent finish; USA-made foam and tactical webbing reinforcements
- Hammer sleeve on tool side; lightweight yet highly durable construction
Applications
- General carpentry and remodeling
- Framing tasks requiring fastener and tool organization
- Finish work where quick access to small tools is needed
- Jobsite tool and fastener carry for multi-trade use
Installation Overview
- Measure at belt height to confirm Large size (fits 42"–46").
- Adjust the padded belt and secure the metal COBRA buckle.
- Load dominant-side pouch with hand tools; stock fasteners in the opposite pouch.
- Place speed square, tape, and nail sets in designated slots.
- Use hammer sleeve and rear loops to secure long-handled tools.
Specifications
| Size | Large |
| Padded Portion of Belt | 41" (104 cm) |
| Your Measurement at Belt Height | 42"–46" (107–117 cm) |
| Color | Sawdust Sage |
| Type | Carpenter Set |
| Fabric | 1000D CORDURA® nylon, water-repellent |
| Buckle | Metal COBRA |
| Reinforcement | USA-made tactical webbing on pouch bottoms |
| Hammer Sleeve | On tool side |
| Made In | USA (COBRA buckle is Austrian-made) |
NOTE: Verify fit at belt height and load-out before use to ensure comfort and balance.
Occidental Leather 461020 SM Sawdust Sage Carpenter Set Description
A durable, lightweight carpenter tool belt set built from 1000D CORDURA® nylon with water-repellent coating. Designed for all-day comfort and organization, it features purpose-built tool and fastener pouches, a padded hammer sleeve, and a metal COBRA® buckle on a contoured belt for secure, quick adjustment.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch (3 along back, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo up front with three small slots and one deep pocket
- Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, dual outside pouches, slots in each fastener pouch, reinforced bar slot underneath
- Contoured belt with Austrian-made metal COBRA® buckle
- American-made foam, military-grade tactical webbing and hardware; heavyweight thread
- 1000 Denier CORDURA® Nylon with water-repellent coating; reinforced pouch bottoms for puncture and abrasion resistance
- Padded hammer sleeve on tool side; lightweight yet rugged construction
Applications
- General carpentry and remodeling
- Framing and rough-in tasks
- Finish work and trim installation
- Jobsite tool and fastener organization
- Multi-trade construction tasks requiring mobility
Installation Overview
- Select the correct size and place the contoured belt at waist/hips.
- Position tool and fastener pouches to dominant and non-dominant sides.
- Secure the COBRA® buckle and snug the belt for a comfortable fit.
- Load tools and fasteners into designated slots and pouches.
- Fine-tune belt and pouch placement for balance and access.
Specifications
| Brand | Occidental Leather |
| Model | 461020 SM |
| Type | Carpenter Set |
| Size | Small |
| Color | Sawdust Sage |
| Padded Portion of Belt | 29″ (74 cm) |
| Belt Height Measurement | 30″ – 34″ |
| Material | 1000D CORDURA® Nylon, tactical webbing, foam padding |
| Buckle | Metal COBRA® quick-release |
| Country of Origin | USA (buckle foreign-made) |
Occidental Leather B8018DB Black OxyLights 3 Pouch Tool Bag with Tape Measure Pouch
Occidental Leather B8018DB Black OxyLights 3 Pouch Tool Bag with Tape Measure Pouch
Occidental Leather B8018DB Description
The Black OxyLights 3 Pouch Tool Bag combines lightweight industrial nylon with leather reinforcements and an integrated tape holder. Designed for right-side wear, it organizes everyday hand tools with dedicated holders for pencils, knife, chisel, crayon, torpedo level, hammer, and a tape up to a 35 ft FatMax.
Occidental Leather B8018DB Includes
- (1) B8018DB Tool Bag
Occidental Leather B8018DB Key Features
- Most popular OxyLights tool bag
- Integrated tape holder fits up to 35 ft FatMax
- Tool-specific holders plus hammer loop for fast access
- Right-side orientation; not offered in left-hand model
- Durable leather and nylon construction
Occidental Leather B8018DB Applications
- Everyday carry of layout and cutting tools
- Framing and finish tasks requiring fast access to hand tools
- Jobsite organization with right-hand dominant layouts
- Tape, level, and marking tool storage on belt systems
Occidental Leather B8018DB Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the right side for right-hand access.
- Load tools into the dedicated holders and main pockets.
- Place a tape measure in the leather holder; verify secure fit.
- Check balance and adjust belt for comfortable carry.
Occidental Leather B8018DB Specifications
| Pockets & Tool Holders | 10 |
| Main Tool Bag | 9 in x 8 in |
| Outer Bag | 5 in x 5.5 in |
| Color | Black |
| Material | Leather and nylon |
| Number of Pouches | 3 |
| Orientation | Right side; not available in left-hand model |
| Tape Holder Capacity | Up to 35 ft FatMax |
Occidental Leather 8018DBLH Description
Left handed OxyLights 3 pouch tool bag designed for the left side carry. Organizes everyday tools with dedicated holders for pencils, knife, crayon, chisel, torpedo level, hammer, and a tape holster compatible with tapes up to 35 ft.
Occidental Leather 8018DBLH Includes
- (1) 8018DBLH OxyLights 3 Pouch Tool Bag
Occidental Leather 8018DBLH Features
- Left handed layout for wear on the left side
- Holders for pencils, utility knife, crayon, chisel, torpedo level, and hammer
- Tape holster fits up to a 35 ft FatMax
- Compact 3 pouch configuration with organized storage
- Lightweight OxyLights construction
Occidental Leather 8018DBLH Applications
- Daily tool organization for carpentry and framing tasks
- Measuring and layout work with quick tape access
- Punch list and trim installs requiring compact storage
Occidental Leather 8018DBLH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for left handed access.
- Load tools into dedicated holders for secure carry.
Occidental Leather 8018DBLH Specifications
| Pockets and Tool Holders | 10 |
| Main Tool Bag | 9 x 8 in |
| Outer Bag | 5 x 5.5 in |
| Weight | 1.3 lb |
| Hand | Left |
| Series | OxyLights |
| Pouch Count | 3 |
Occidental Leather 8060LH OxyLights 3 Pouch Fastener Bag - Left Handed
Occidental Leather 8060LH OxyLights 3 Pouch Fastener Bag - Left Handed
Occidental Leather 8060LH Description
The OxyLights 3 pouch fastener bag for left handed users is built from industrial nylon with leather reinforcements. Designed for framing and general carpentry, it provides dedicated holders for a 1 inch blade square, angle square, cat's paw loop, driver bits and more. Left handed layout is worn on the right side for quick access.
Occidental Leather 8060LH Includes
- (1) 8060LH OxyLights 3 Pouch Fastener Bag
Occidental Leather 8060LH Features
- 9 pockets and tool holders for organized storage
- Industrial nylon body with leather trim for durability
- Left handed layout, worn on right side
- Dedicated holders for blade square, angle square, cat's paw, driver bits
- Made in the USA
Occidental Leather 8060LH Applications
- Framing tasks requiring quick access to fasteners and layout tools
- General carpentry tool and fastener organization
- Left handed setups worn on the right side of the belt
Occidental Leather 8060LH Installation Overview
- Thread the bag onto a compatible work belt.
- Position on the right side for left handed use.
- Load fasteners and tools into the designated pockets and holders.
- Check access and balance before starting work.
Occidental Leather 8060LH Specifications
| Pockets and Tool Holders | 9 |
| Material | Leather, Nylon |
| Color | Brown, Green |
| Weight | 1.2 lbs |
| Main Bag Size | 9 x 8 in |
| Outer Bag Size | 8 x 6 in |
| Upper Bag Size | 4.5 x 4.5 in |
| Orientation | Left Handed, worn on right side |
| Country of Origin | USA |
Occidental Leather 8583LH Description
Left handed Heritage FatLip fastener bag with a 10 inch deep main compartment, full leather boot, and a leather reinforced FatLip mouth that stays open and resists abrasion. The patented 2 in 1 outer bag integrates an angle square holster, with added sleeves and loops for tri square, cats paw, and driver bits.
Occidental Leather 8583LH Includes
- (1) 8583LH Left Handed Heritage FatLip Fastener Bag
Occidental Leather 8583LH Features
- 10 inch deep main bag with full leather boot
- Leather FatLip mouth keeps bag formed, open, and abrasion resistant
- Patented 2 in 1 outer bag with built in angle square holster
- Tri square sleeve, cats paw loop, and external pouches for nail sets or driver bits
- Left handed layout worn on the right side
- Made in USA
Occidental Leather 8583LH Applications
- Framing and carpentry fastener organization
- Drywall installation tool and bit storage
- General construction fastener and small tool management
Occidental Leather 8583LH Installation Overview
- Slide the bag onto your work belt.
- Position on the right side for left handed use.
- Load fasteners and tools into designated pockets.
- Confirm the FatLip mouth and compartments are clear for access.
Occidental Leather 8583LH Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 10 in x 10 in |
| Outer Bag | 9 in x 6 in |
| Upper Bag | 5 in x 4.5 in |
| Material | Leather and Nylon Hybrid |
| Weight | Approx. 1.7 lb |
| Color | Hunter Green |
| Handedness | Left handed, wear on right side |
