Occidental Leather Specialty Tool Accessories

Occidental Leather 2003 Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, diagonal cutter; plus one round pencil
• Lightweight, compact, and jobsite-ready
• Made in the USA

Occidental Leather 2003 Applications

• Safe storage of sharp edge tools on the belt or in bags
• Protecting tool pouches and clothing from blade damage
• Keeping a round pencil handy alongside primary tool
• Organizing chisels, knives, and cutters for quick access

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it to a tool bag edge or pocket.
2. Insert the primary tool into the main compartment.
3. Place a round pencil in the dedicated side slot.
4. Ensure the clip is fully seated and the tool is secure before use.

Occidental Leather 5520 Key Features

• 5-in-1 functionality — organize hammer, pliers, pencil, crayon or screwdriver, and a sharp tool
• Removable Oxy Tool Shield protects chisels, knives, and other sharp edges
• Full-grain American leather for long service life
• Space-efficient footprint on your belt
• Slides onto work belts up to 3 inches wide
• Made in the USA

Occidental Leather 5520 Applications

• Framing and general carpentry hand tool carry
• Electrical trim and service work
• Punch list and maintenance tasks
• Everyday belt carry for essential hand tools

Occidental Leather 5520 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position for preferred hand access on your belt system.
3. Load hammer, pliers, pencil, and crayon or screwdriver into the dedicated sleeves.
4. Insert chisels or knives into the removable Oxy Tool Shield.
5. Check fasteners and leather for secure fit before use.

Occidental Leather 5053 Key Features

• Five pockets and tool holders in a compact layout
• Dedicated test meter pocket fits most compact testers
• Snap loop carry hangs over belts up to 2 inches wide or carry standalone
• All-leather, professional grade construction
• Made in USA

Occidental Leather 5053 Applications

• Estimating and inspections
• Troubleshooting and service calls
• Trim-out and finish electrical tasks

Occidental Leather 5053 Installation Overview

1. Open snap loop and place over a belt up to 2 inches wide or carry by hand.
2. Seat the caddy against the belt and close the snap securely.
3. Load tools into the five pockets, placing the test meter in the larger pocket.
4. Verify all tools are seated and the snap is fully engaged before use.

Occidental Leather 2006 Features

• Protects pouches and bags from knives, chisels, scribes and other sharp tools
• Rigid polypropylene provides smooth, snag free tool access
• Universal fit for most tool bags and vest pockets
• Lightweight and durable for daily jobsite use
• Made in the USA

Occidental Leather 2006 Applications

• Line tool pockets to prevent punctures from sharp tools
• Outfit work vests and pouches for better tool organization
• Extend lifespan of tool bags by adding internal protection
• Keep chisels and knives upright for faster retrieval

Occidental Leather 2006 Installation Overview

1. Choose the pocket or pouch that holds sharp tools.
2. Drop the Pocket Shield into the pocket with the curve matching the pocket shape.
3. Seat it fully against the inner wall.
4. Load tools; verify smooth insertion and removal.
5. Reposition or replace the insert as it wears.

Occidental Leather 5022 Key Features

• Top-grain leather construction for comfort and durability
• Non-marring surface helps prevent floor scuffs
• High-density padding with inner plastic shield minimizes pressure points
• Quick release fasteners for easy on and off
• Made in the USA

Occidental Leather 5022 Applications

• Interior remodeling and finish work
• Flooring installation without scuffing surfaces
• General jobsite knee protection

Occidental Leather 5022 Installation Overview

1. Place pads over knees with curved edge down.
2. Secure quick release buckles and straps.
3. Adjust for snug, comfortable fit; avoid overtightening.
4. Verify pads do not shift during movement.

Occidental Leather 5026 Key Features

• Quick clip point for tape measures, clip on pouches and meters
• Fits belts up to 3 inches; accepts clips up to 1 inch
• Leather loop with steel rectangular ring for durability
• Compact add on for any tool belt
• Made in USA

Occidental Leather 5026 Applications

• Attach tape measures to your belt
• Hang small clip on bags or meter cases
• Add an extra hook point to existing tool belts
• Organize frequently used clip on tools

Occidental Leather 5026 Installation Overview

1. Slide the loop onto a work belt up to 3 inches wide.
2. Position where convenient on your belt.
3. Attach clip on tools or accessories with clips up to 1 inch wide.

Occidental Leather 5057 Features

• 4 pocket layout keeps small tools separated and easy to grab
• Premium leather construction with reinforced stitching
• In pocket carry or snap loop for belt use
• Fits most belts up to 2.5 inches wide
• Lightweight, compact design for everyday tasks
• Made in USA

Occidental Leather 5057 Applications

• Small repairs and service calls
• Electrical and shop maintenance
• Gardening and farm upkeep
• Cabinet and finish work

Occidental Leather 5057 Installation Overview

1. Load tools into the four pockets as needed.
2. Place the caddy in a front or rear pocket, or
3. Attach via the snap loop to a belt up to 2.5 inches wide.
4. Adjust position for comfortable access and secure carry.

Occidental Leather 5010 Features

• 1 inch wide leather loop supports a safety release snap
• Ideal for saw keys, small wrenches, and similar items
• Keeps frequently used tools within easy reach
• Durable leather construction
• Made in USA

Occidental Leather 5010 Applications

• Hang keys, small wrenches, and accessories from a belt or bag
• Add quick access clip point to tool belts or pouches
• Organize frequently used small tools on the jobsite

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt, strap, or D ring.
2. Secure the loop so the snap hangs freely.
3. Clip keys or small tools to the safety release snap.
4. Verify the snap opens and closes smoothly before use.

Occidental Leather 5031 Key Features

• Belt-worn utility attachment for spring-snap tools
• Fits up to a 3 inch work belt
• 3/4 inch dee ring for secure clipping
• Leather strap construction for durability
• Snap closure secures around belt
• Made in USA

Occidental Leather 5031 Applications

• Carry telephone butt-sets and testers from a belt
• Attach meters, small tools, or lanyards via spring snaps
• Add a quick-access ring point to tool belts
• Organize clip-on accessories for electricians and technicians
• Temporary attachment point for keys or ID holders on the job

Occidental Leather 5031 Installation Overview

1. Open the strap and place it around your work belt.
2. Position the dee ring where you want access.
3. Snap the closure to secure the strap to the belt.
4. Attach the spring snap from your tool or lanyard to the dee ring.
5. Confirm the snap and ring are fully engaged before use.