Sort by:
Occidental Leather 5055 Description
The Occidental Leather 5055 Stronghold Suspender System delivers even load distribution and all?day comfort for heavy tool rigs. A contoured, padded yoke lined with Dri?Lex® wicks perspiration while keeping straps secure to reduce hip & lower?back strain. Includes leather loop attachments for belts up to 3″ and a heavy?duty center D?ring for hanging your rig.
Occidental Leather 5055 Includes
- (1) 5055 Stronghold Suspender System
- (1) Leather loop belt attachment set (fits up to 3″ belts)
Occidental Leather 5055 Key Features
- Even weight distribution to relieve hips & lower back
- Contoured, padded yoke lined with Dri?Lex® for moisture management
- Adjustable chest strap for quick on?off and secure fit
- Tool?friendly chest pockets on both sides
- Heavy?duty center D?ring for hanging the rig (not for safety use)
- Leather loop attachment system fits up to 3″ work belts
- Available in OxyRed or OxyBlack; Standard & Small sizes
- Made in USA
Occidental Leather 5055 Applications
- Support heavy tool belts with balanced weight distribution
- Increase jobsite comfort during framing, carpentry, and finish work
- Stabilize tool rig to keep straps in place while moving
- Hang up complete rig between tasks using center D?ring
Occidental Leather 5055 Installation Overview
- Attach the included leather loops to your tool belt (up to 3″ wide).
- Connect the suspender straps to the belt loops and adjust length.
- Position the padded yoke centered on shoulders for comfort.
- Secure the adjustable chest strap; confirm straps stay in place.
- Use the center D?ring to hang the rig when not in use (do not use for safety).
Occidental Leather 5055 Specifications
| Product Type | Suspenders / Suspender System |
| Material | Leather with Dri?Lex® moisture?wicking yoke lining |
| Belt Compatibility | Leather loop attachment for belts up to 3″ |
| Sizes | Standard, Small |
| Colors | OxyRed, OxyBlack |
| Weight | Approx. 2.0 lb (Standard ~928 g; Small ~832 g) |
| Pockets | Chest pockets for pencils/clip?on items on both sides |
| Country of Origin | USA |
NOTE: The center D?ring is for hanging the rig only and must not be used as a safety connection.
FEATURES:
• 2" wide heavy leather tongue
• Nickel plated steel roller buckle
• Constructed entirely of the highest quality 12-14 oz. bridle leather to provide support and comfort.
• Edge stitched for quality, appearance and strength.
SPECIFICATIONS:
A quality ranger style 3" work belt.
Sizing Your Belt
To size your tool belt, place your existing tool belt on an even surface and measure it from the end of the buckle to the most commonly used hole. Select the belt size (the "mid range" column below) that is closest to your measurement.
If you do not have a current tool belt to measure, you can get an approximate mid range measurement by adding 4" to your pant waist size.
| Size | Mid Range |
Approx. Pant Waist |
Over All Length |
| Small | 34" | (29" to 32") | 41.5" |
| Medium | 37" | (33" to 35") | 44.5" |
| Large | 41" | (36" to 39") | 48.5" |
| X-Large | 45" | (40" to 44") | 52.5" |
| XX-Large | 49" | (45" to 49") | 57.5" |
| XXX-Large | 53" | (50" to 54") | 61.5" |
Occidental Leather 5009 Leather Work Suspenders Description
Heavy-duty, hand-crafted bridle leather suspenders with wool-lined shoulder pads and spring clip connections for direct attachment to your work belt. Fully adjustable for a secure, comfortable fit. Made in USA.
Occidental Leather 5009 Includes
- (1) Set of Leather Work Suspenders
Occidental Leather 5009 Features
- Traditional heavy-duty leather construction
- Hand crafted from bridle leather for long service life
- Large, wool-lined shoulder pads for comfort
- Heavy-duty spring clips with direct connection loop hardware
- Fully adjustable straps for personalized fit
- Made in USA
Occidental Leather 5009 Applications
- Distributes tool belt weight across shoulders to reduce hip strain
- Keeps belts securely positioned during active work
- Ideal for carpentry, framing, and general construction
Occidental Leather 5009 Installation Overview
- Attach spring clips to your work belt’s loop hardware/D-rings.
- Center the back yoke and route straps over shoulders.
- Adjust front and side buckles for preferred height and tension.
- Secure the direct connection loop hardware and check clip engagement.
- Confirm comfortable fit and even weight distribution.
Occidental Leather 5009 Specifications
| Material | Bridle leather |
| Shoulder Pads | Wool-lined, large |
| Hardware | Heavy-duty spring clips; direct connection loop hardware |
| Adjustability | Fully adjustable |
| Size Options | Standard (5009), Small (5009 SM) |
| Weight | Standard: 888 g; Small: 839 g |
| Barcodes | Standard: 759244005202; Small: 759244356304 |
| Origin | USA |
Occidental Leather 1546 Stronghold Lights Description
Ultra-light industrial nylon suspenders designed for tool belts, the Stronghold Lights deliver exceptional comfort and balanced weight distribution. Chest-height pockets keep small items handy, while heavy-duty spring clips and a leather loop attachment system make on/off and belt integration fast and secure.
Occidental Leather 1546 Includes
- (1) Set of Suspenders
Occidental Leather 1546 Features
- Ultra-light industrial nylon construction for reduced fatigue
- Chest-height pockets for pencils and clip-on accessories
- Even weight distribution for all-day comfort
- Heavy-duty spring clips for quick attachment and removal
- Slides onto your tool belt for easy setup
- Leather loop attachment system fits up to 3" tool belts
- Made in USA
Occidental Leather 1546 Applications
- Support and distribute tool belt weight on the shoulders
- Keep small tools and pencils accessible at chest height
- Enhance comfort during prolonged wear on jobsites
Occidental Leather 1546 Installation Overview
- Slide suspenders onto the tool belt using the leather loop attachment points (fits up to 3" belts).
- Clip the heavy-duty spring clips to the belt or attachment loops.
- Adjust shoulder and front straps for a balanced, comfortable fit.
- Stow pencils or clip-on items in the chest pockets.
Occidental Leather 1546 Specifications
| Material | Ultra-light industrial nylon |
| Attachment | Leather loop system for up to 3" tool belts |
| Weight | 1.4 lb |
| GTIN | 759244184600 |
| Country of Manufacture | USA |
Occidental Leather 8581 Description
The FatLip™ Nylon Fastener Bag from Occidental Leather delivers rugged capacity and smart organization. A 10″ deep main bag with a full leather boot and leather-reinforced FatLip mouth stays open and resists abrasion. The patented 2-in-1 outer bag integrates an angle square holster, with dedicated sleeves for a tri-square, cat’s paw, and external pouches for driver bits or nail sets.
Occidental Leather 8581 Includes
- (1) Occidental Leather 8581 FatLip Nylon Fastener Bag
Occidental Leather 8581 Features
- FatLip™ leather mouth keeps the bag formed, open, and protected
- Full leather boot for long-term durability
- Patented 2-in-1 outer bag with built-in angle square holster
- Tri-square sleeve, cat’s paw loop, and external nail set/driver bit pouches
- 10 pockets & tool holders for efficient organization
- Designed to be worn on the non-dominant side for fastener access
- Made in the USA
Occidental Leather 8581 Applications
- Framing: Keep nails, angle square, and layout tools at hand
- Drywall installation: Store fasteners and driver bits for quick access
- General construction: Organize common hand tools and fasteners
- Remodeling: Versatile pouch setup for mixed trades
Occidental Leather 8581 Installation Overview
- Thread the bag onto a compatible 3″ work belt.
- Position on the non-dominant side for fastener access.
- Load tools and fasteners into main, outer, and upper pockets.
- Seat the angle square in the integrated holster; place tri-square and cat’s paw in their sleeves.
- Verify comfortable reach and balance before use.
Occidental Leather 8581 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 10″ W x 10″ H |
| Outer Bag | 9″ W x 6″ H |
| Upper Bag | 5″ W x 4.5″ H |
| Weight | 1.7–1.8 lbs (varies by source) |
| Materials | Nylon with leather FatLip mouth & full leather boot |
| Compatibility | Fits 3″ work belts |
| Country of Origin | USA |
| SKU | 8581 |
| Color | Black |
Occidental Leather 8003 Description
The 3" Leather & Nylon Work Belt delivers padded comfort with rugged durability. It features a 3" wide industrial-strength padded nylon body, a heavy 2" leather tongue, and a nickel-plated steel roller buckle for a secure fit. Designed to pair with most tool and fastener bags and compatible with suspenders.
Occidental Leather 8003 Includes
- (1) 3" Leather & Nylon Work Belt (Medium)
Occidental Leather 8003 Key Features
- 3" wide padded nylon belt body for balanced load support
- 2" heavy-duty leather tongue with nickel-plated steel roller buckle
- Lightweight industrial nylon reduces fatigue
- Works with most tool and fastener bags; suspenders compatible
- Made in USA
Occidental Leather 8003 Applications
- Foundation belt for tool and fastener bag setups
- Daily jobsite wear requiring comfort and support
- Use with suspenders for heavier rigs
Occidental Leather 8003 Installation Overview
- Measure your current tool belt from buckle end to the hole you use most.
- Select the size closest to that midpoint measurement.
- Attach your tool/fastener bags and suspenders as needed.
- Adjust to the midpoint hole; fine-tune within the 4" range.
Occidental Leather 8003 Specifications
| Belt Body Width | 3" padded industrial nylon |
| Leather Tongue Width | 2" heavy-duty leather |
| Buckle | Nickel-plated steel roller |
| Material | Industrial-strength padded nylon with steel hardware |
| Compatibility | Most tool & fastener bags; suspenders |
| Made In | USA |
| Sizes | Small, Medium, Large, X-Large, XX-Large, XXX-Large |
| Mid Range (belt size) | SM: 34" | M: 37" | L: 41" | XL: 45" | XXL: 49" | XXXL: 53" |
| Approx. Pant Waist | SM: 29"–32" | M: 33"–35" | L: 36"–39" | XL: 40"–44" | XXL: 45"–49" | XXXL: 50"–54" |
| Overall Length | SM: 41.5" | M: 44.5" | L: 48.5" | XL: 52.5" | XXL: 57.5" | XXXL: 61.5" |
Occidental Leather 5062 Description
The 4 Pouch Pro Fastener Bag (model 5062) is an all–leather, high?capacity pouch featuring 10 pockets and tool holders in a compact stacked layout. Weighing only 2.1 lbs, it organizes fasteners, layout tools, and bits while riding comfortably on your work belt.
Occidental Leather 5062 Includes
- (1) 5062 4 Pouch Pro Fastener Bag
Occidental Leather 5062 Key Features
- 4-pouch stacked layout for expanded capacity
- 10 pockets and tool holders sized for fasteners and layout gear
- Dedicated slots for 1" blade square, angle square, driver bits, and cat’s paw
- Full-grain leather construction for durability
- Designed to be worn on the non-dominant side
- Made in the USA
Occidental Leather 5062 Applications
- Framing and general carpentry fastener storage
- Organizing layout tools and driver bits on belt
- Daily jobsite use where rugged leather pouches are preferred
Occidental Leather 5062 Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the non-dominant side for balanced access.
- Load fasteners and tools into the designated pockets and holders.
- Check that the pouch is secure and pockets are seated before work.
Occidental Leather 5062 Specifications
| Material | Full-grain leather |
| Pockets/Tool Holders | 10 |
| Weight | 2.1 lbs |
| Main Bag | 9" W x 8" H |
| Middle Bag | 7" W x 6" H |
| Outer Bag | 5.5" W x 5.5" H |
| Upper Bag | 4.5" W x 4.5" H |
| Hand Orientation | Worn on the non-dominant side |
| Model Options | 5062 (Right handed), 5062LH (Left handed) |
| Country of Manufacture | USA |
Occidental Leather 8582 FatLip Nylon Tool Bag
A 10" deep hybrid nylon/leather tool pouch featuring a full leather boot and the signature leather FatLip mouth that holds its shape for easy access and abrasion resistance. Purpose-built for right-side carry with organized storage for daily-use tools.
Includes
- (1) FatLip Nylon Tool Bag (8582)
Key Features
- 10" deep main pouch for high capacity
- FatLip leather-reinforced mouth stays open and resists wear
- Full leather boot adds structure and durability
- 13 pockets & tool holders for organized access
- Right-hand layout; worn on the right side
- Made in the USA
Applications
- Daily carry of hand tools such as hammer, knife, pencils, and chisels
- Carpentry/framing setups on the dominant-hand side
- General construction and remodeling tool organization
Specifications
| Pockets & Tool Holders | 13 |
| Main Tool Bag | 10" W x 10" H |
| Outer Bag | 6.5" W x 5.5" H |
| Depth | 10" |
| Material | Nylon body with full leather boot and leather-reinforced FatLip mouth |
| Weight | 1.9 lb (approx.) |
| Orientation | Right-hand |
| Country of Manufacture | USA |
NOTE: This 8582 model is configured for right-hand use and does not have a left-hand variant.
Occidental Leather 5060 Description
Three-pouch, all-leather fastener bag with 9 pockets and tool holders for organized storage. Main bag: 10" W x 8" D; outer bag: 7" W x 5-1/2" D; upper bag: 5-1/2" W x 4" D. Highly recommended for framing and general carpentry.
Occidental Leather 5060 Includes
- (1) Occidental Leather 5060 3 Pouch Pro Fastener Bag
Occidental Leather 5060 Features
- Three stacked pouches with top-access tier for efficient fastener storage
- 9 pockets and tool holders for layout tools and bits
- Dedicated holders fit cat’s paw, driver bits, angle square, and 1" blade square
- Premium, reinforced leather construction
- Available in left- or right-hand setups and multiple colors
- Made in the USA
Occidental Leather 5060 Applications
- Framing: Keep nails and layout tools at hand
- General carpentry: Organized storage for daily tools and fasteners
- Jobsite setup: Streamlined access to squares, bits, and cat’s paw
Occidental Leather 5060 Specifications
| Material | Premium durable leather |
| Pockets/Tool Holders | 9 |
| Main Bag | 10" W x 8" D |
| Outer Bag | 7" W x 5-1/2" D |
| Upper Bag | 5-1/2" W x 4" D |
| Weight | 1.9 lbs |
| Hand Options | Left-hand or Right-hand |
| Color Options | OxyRed, OxyBlack, Navy (limited), Ultra Black, Green |
| Made In | USA |
Occidental Leather 5520 Description
The Occidental Leather 5520 5-in-1 Tool Holder maximizes belt space by organizing essentials in a compact leather holster. Carry a hammer, pliers, pencil, lumber crayon or screwdriver, plus a sharp tool using the included Oxy Tool Shield. Built from rugged American leather and fits belts up to 3" wide.
Occidental Leather 5520 Includes
- (1) Occidental Leather 5520 5-in-1 Tool Holder
- (1) 2003 Oxy Tool Shield
- (1) Tool Bag
Occidental Leather 5520 Key Features
- 5-in-1 capacity — holders for hammer, pliers, pencil, lumber crayon/screwdriver, and sharp tools
- Includes removable Oxy Tool Shield for chisels, knives, or similar
- Premium full-grain American leather construction
- Compact footprint saves belt space; fits belts up to 3" wide
- Made in the USA
Occidental Leather 5520 Applications
- Framing: Keep core hand tools at the ready
- Electrical work: Organize pliers, drivers, and markers
- Carpentry: Carry chisels, hammers, and layout tools
- Punch-list/finish tasks: Streamlined, compact tool access
Occidental Leather 5520 Installation Overview
- Slide the holder onto a work belt up to 3" wide.
- Insert the removable Oxy Tool Shield into its pocket if using sharp tools.
- Load tools into the designated holders (hammer, pliers, pencil, crayon/screwdriver).
- Check retention and accessibility; adjust tool placement as needed.
Occidental Leather 5520 Specifications
| Material | Full-grain American leather |
| Dimensions | 3.5" x 7.75" |
| Belt Fit | Up to 3" wide |
| Includes | 2003 Oxy Tool Shield |
| Country of Manufacture | USA |
Occidental Leather 3 Pouch Pro Leather Tool Bag with Tape Measure Pouch 5018DB
$134.90
Unit price perOccidental Leather 3 Pouch Pro Leather Tool Bag with Tape Measure Pouch 5018DB
$134.90
Unit price perOccidental Leather 5018DB Description
Our most popular pro leather tool bag with double outer bags and dedicated holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer, plus an integrated tape holster. Designed to be worn on the dominant-hand side for quick access.
Occidental Leather 5018DB Includes
- (1) Occidental Leather 5018DB 3-Pouch Pro Tool Bag with Tape Holster
Occidental Leather 5018DB Features
- 11 pockets and tool holders for organized carry
- Built-in tape holster fits tapes up to 35' FatMax
- Dedicated hammer loop for quick access
- Pro-grade leather construction, made in the USA
- Available in right- or left-hand configurations
Occidental Leather 5018DB Applications
- Daily tool organization for carpentry and framing
- Quick access to measuring tape, hammer, and hand tools
- Right- or left-hand workflow setups on professional belts
Occidental Leather 5018DB Specifications
| Pockets & Tool Holders | 11 |
| Main Tool Bag | 9" W x 8" H |
| Outer Bags | 5" W x 5.5" H |
| Tape Holster Capacity | Up to 35' FatMax |
| Hand Orientation | Right or Left options |
| Made In | USA |
| Material | Leather |
Occidental Leather 5589 Description
All-leather, belt-worn electrician’s tool case engineered for commercial use. Purpose-built for journeyman electricians, it provides 25 pockets and tool holders with a heavy-duty electrical tape chain and a metal utility clip for quick access. Tool bags are worn on the right side and hold frequently used tools such as hammers, pencils, utility knives, and chisels.
Occidental Leather 5589 Includes
- (1) 5589 Leather Electrician’s Tool Case
Occidental Leather 5589 Features
- All leather construction for durability
- 25 pockets and holders to organize electrician essentials
- Heavy-duty electrical tape chain and metal utility clip
- Designed specifically for journeyman electricians
- Black leather tool holders with reinforced stitching
- Right-hand wear layout; left-hand version available
Occidental Leather 5589 Applications
- Commercial and residential electrical work
- Daily organization and carry of electrician hand tools
- Belt-mounted access to screwdrivers, pliers, meters, and testers
- Handed layouts to match preferred workflow
Occidental Leather 5589 Installation Overview
- Select right- or left-hand version.
- Slide case onto work belt; position on dominant-hand side.
- Load tools into dedicated pockets and sleeves.
- Attach tape rolls to the chain and small items to the utility clip.
- Check fit and comfort before use.
Occidental Leather 5589 Specifications
| Pockets & Tool Holders | 25 |
| Main Bag | 8" W x 6.75" H x 2.75" D |
| Material | Heavy-duty leather |
| Weight | 2.0 lbs |
| Handedness | Right- or Left-hand versions available |
| Origin | Made in USA |
Occidental Leather 5005L Description
Designed to eliminate cutting edges and circulation issues common with safety and tool belts, this belt liner features .75"+ thick sheepskin padding for maximum comfort. Sheepskin provides natural insulation—warm in winter, cool in summer—and wool wicks moisture to dry quickly. Adjustable straps secure belts up to 3" wide and require 1–2" of additional belt length.
Occidental Leather 5005L Includes
- (1) Belt Liner with Sheepskin (5005L)
Occidental Leather 5005L Key Features
- .75"+ thick sheepskin pads for cushioned support
- Moisture-wicking wool keeps you dry and comfortable
- Natural insulation—comfortable year-round
- Adjustable straps fit belts up to 3" wide
- Requires 1–2" extra belt length for proper fit
- Made in USA
Occidental Leather 5005L Applications
- Increase comfort when wearing loaded tool belt rigs
- Reduce pressure points during long shifts
- Improve fit for framing, finish, electrical, and roofing setups
- Add insulation and moisture control to any compatible work belt
Occidental Leather 5005L Installation Overview
- Lay your existing tool belt flat and measure per size chart to confirm fit.
- Position the liner inside the belt with sheepskin toward the body.
- Thread and fasten the liner’s adjustable straps around the belt (up to 3" wide).
- Allow 1–2" extra belt length; secure buckle and check comfort.
- Attach pouches/holders and verify clearance before use.
Occidental Leather 5005L Specifications
| Material | Sheepskin padding with leather outer |
| Padding Thickness | .75"+ |
| Fits Belt Width | Up to 3" |
| Extra Belt Length Needed | 1–2" |
| Sizes | Small, Medium, Large, X-Large |
| Weight | Approx. 1.6 lb |
| Country of Manufacture | USA |
Occidental Leather 8018DB OxyLights 3 Pouch Tool Bag Description
A lightweight, right-hand tool bag from the OxyLights series featuring compact 3-pouch organization and dedicated holders for pencils, work knife, chisel, torpedo level, lumber crayon, hammer, and a tape measure holster that fits tapes up to 35' FatMax. Reinforced corners with leather for durability.
Occidental Leather 8018DB Includes
- (1) OxyLights 3 Pouch Tool Bag (8018DB)
Occidental Leather 8018DB Features
- Popular OxyLights 3-pouch layout for everyday tools
- OxyRed leather reinforcement at stress points
- Heavy-duty hammer loop and tape measure holster (up to 35')
- Interior holders for knife, chisel, pencil, lumber crayon, and level
- Designed for right-side wear for right-handed users
- Lightweight nylon/leather hybrid construction; Made in USA
Occidental Leather 8018DB Applications
- Carpentry and framing tool carry
- Finish and trim work organization
- General construction and handyman tool storage
- Right-hand dominant setups needing quick access
Occidental Leather 8018DB Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the right side for dominant-hand access.
- Load tools into dedicated holders and pouches.
- Confirm balance and adjust placement for comfort.
Occidental Leather 8018DB Specifications
| Pockets & Tool Holders | 10 |
| Main Tool Bag | 9" x 8" |
| Outer Bag | 5" x 5.5" |
| Material | Nylon & leather hybrid |
| Weight | Approx. 1.3–1.4 lbs |
Occidental Leather 5523 Description
Compact and efficient, the clip-on 4-in-1 holder delivers maximum utility in minimal space. It provides dedicated storage for a tape measure, pencil, lumber crayon or screwdriver, and includes an Oxy Tool Shield for safely carrying sharp tools. Built from sturdy American leather with an extra heavy-duty steel clip that fits belts up to 2" wide.
Occidental Leather 5523 Includes
- (1) Clip-On 4-in-1 Tool & Tape Holder
- (1) Oxy Tool Shield
Occidental Leather 5523 Key Features
- 4-in-1 capacity for tape, pencil, crayon/screwdriver, and sharp tools
- Includes Oxy Tool Shield for chisels, knives, or cutters
- Extra heavy-duty steel clip fits belts up to 2" wide
- Sturdy American leather construction for long-term durability
- Clip-on design for quick attachment and removal
- Made in the USA
Occidental Leather 5523 Applications
- Carry and access a tape measure on the job
- Keep pencils and lumber crayons within easy reach
- Holster a screwdriver or similar hand tool
- Safely store sharp tools using the included shield
- Clip to work belts for carpentry, framing, or finish work
Occidental Leather 5523 Installation Overview
- Attach the steel clip to a belt up to 2" wide.
- Insert tape measure into the main pocket.
- Place pencil and crayon/screwdriver in side holders.
- Mount sharp tools in the Oxy Tool Shield.
- Confirm secure fit before use.
Occidental Leather 5523 Specifications
| SKU | 5523 |
| Material | American leather |
| Clip Material | Steel |
| Belt Fit | Up to 2" wide |
| Capacity | 4-in-1 (tape, pencil, crayon/screwdriver, sharp tool) |
| Weight | 0.7 lb |
| Origin | Made in USA |
Occidental Leather 2500 Stronghold SuspendaVest Description
Build a belt—free carry system with the Stronghold SuspendaVest. The quick–disconnect 3" leather belting accepts compatible tunnel–loop tool bags, while wide Dri–Lex® padded shoulders and adjustable straps provide comfort and balanced load distribution. Includes 17 pockets/tool holders plus behind–holder glove pockets and a hanging D–ring. Made in USA.
Includes
- (1) Occidental Leather 2500 Stronghold SuspendaVest
Key Features
- Quick–disconnect 3" leather belting accepts tool bags with tunnel loops up to 8.5" wide
- Wide padded shoulder support lined with Dri–Lex to wick perspiration
- Fully adjustable straps with quick–release chest buckle
- Even load distribution to lessen fatigue and help prevent lower back strain
- 17 pockets/tool holders keep common tools close at hand
- Extra pockets behind tool holders for hands or gloves
- Heavy–duty D–ring for hanging storage
- Made in USA; left–handed option available
Applications
- Framing without a traditional belt
- Electrical work needing balanced tool carry
- Concrete tasks with frequent tool access
- Trim and finish work in tight spaces
Installation Overview
- Adjust shoulder straps and chest buckle for comfort.
- Attach compatible tool bags to the 3" leather belting via tunnel loops (up to 8.5").
- Organize tools among the 17 holders; secure heavier items to designated loops.
- Use the D–ring for hanging storage when not in use.
- Detach bags as needed for finish or tight–space tasks.
Specifications
| Pockets & Tool Holders | 17 |
| Weight | 3.0 lbs |
| Size | One size fits most |
| Material | 3" wide leather belting with padded fabric vest |
| Tool Bag Compatibility | Tunnel loops up to 8.5" wide |
| Closure | Quick–release chest strap buckle |
NOTE: Because of the extra–wide hangers, this vest will not accommodate models 5525 or B5611 tool bags.
Occidental Leather 5355 Stronghold Comfort Package Description
The 5355 Stronghold Comfort Package pairs the Stronghold Suspension System with Hip Buddies to redistribute belt weight and enhance all?day comfort. Accepts most tool bags up to 7.5" wide and is built with leather and industrial nylon for durability. Made in USA.
Occidental Leather 5355 Includes
- (1) 5355 Stronghold Comfort Package
- (1) 5055 Stronghold Suspension System
- (1) 9008 Hip Buddies
Occidental Leather 5355 Features
- Suspension system helps shift load from hips to shoulders for reduced fatigue
- Hip Buddies padding softens pressure points for added comfort
- Accepts any bag up to 7.5" wide
- Leather and nylon construction
- Available colors: OxyRed or Black
- Made in USA
- Not compatible with 5525 Big Oxy Fastener Bag, B5611 Green Building Fastener Bag, Adjust?to?Fit systems, or Stronghold Comfort Belts/Systems
Occidental Leather 5355 Applications
- Reduce hip strain when wearing loaded tool belts
- Increase comfort during long days on the jobsite
- Stabilize and balance tool belt weight
- Use with compatible Occidental Leather bag setups up to 7.5" wide
Occidental Leather 5355 Installation Overview
- Attach Hip Buddies to your belt where support is needed.
- Clip or fasten the suspension straps to the belt’s attachment points.
- Adjust front and rear strap lengths for balanced load and comfort.
- Check bag widths (up to 7.5") and compatibility before use.
- Secure all buckles and hardware; test fit and make final adjustments.
Occidental Leather 5355 Specifications
| Product Type | Suspenders |
| SKU | 5355 |
| Variants | 5355 (OxyRed), 5355B (Black) |
| Material | Leather & Nylon |
| Weight | 2.4 lb (approx. 1091 g) |
| Compatible Bag Width | Up to 7.5" |
| Made In | USA |
| Incompatibilities | 5525, B5611, Adjust?to?Fit systems, Stronghold Comfort Belts/Systems |
| Color Options | OxyRed, Black |
Occidental Leather 5595 Description
Go belt-free with the Occidental Leather 5595 Beltless Retro Package. This system lets you wear compatible tool bags without a traditional belt by attaching bags that accept a 3" belt, delivering vest-based comfort and load distribution. Made in the USA.
Occidental Leather 5595 Includes
- (1) Beltless Retro Package Vest
Occidental Leather 5595 Key Features
- Go beltless with bags that accept a 3" belt
- Works with many traditional Occidental Leather bags for custom setups
- Vest-style suspension helps distribute load off the hips
- Leather and padded components shown for comfort and durability
- Made in USA
Occidental Leather 5595 Applications
- Converting belt-mounted tool bags to a beltless vest system
- Reducing hip strain by distributing tool weight across shoulders and torso
- Customizing carry systems for carpentry, framing, finish work, and general trades
Occidental Leather 5595 Installation Overview
- Attach compatible tool bags with 3" belt slots to the Beltless Retro hangers.
- Put on the vest and adjust shoulder, chest, and side straps for a snug fit.
- Balance load by positioning bags evenly on both sides.
- Secure all buckles/clips and test range of motion before use.
Occidental Leather 5595 Specifications
| Brand | Occidental Leather |
| SKU | 5595 |
| Product Type | Beltless vest suspension system |
| Compatibility | Bags that accept a 3" belt; not compatible with B5611 and 5525 per manufacturer |
| Made In | USA |
| Weight | 2.7 lb |
| GTIN | 759244169409 |
Occidental Leather 8062 Description
The OxyLights 4 Pouch Fastener Bag adds an extra outer pouch to the classic 8060 layout for increased organization and quick access. Designed to be worn on the left side for non-dominant hand access, this lightweight nylon bag with leather reinforcements offers a streamlined profile with dedicated holders for squares, driver bits, and cat’s paw.
Occidental Leather 8062 Includes
- (1) Occidental Leather 8062 OxyLights 4 Pouch Fastener Bag
Occidental Leather 8062 Key Features
- Same features as the 8060 with an added outer pouch
- 10 pockets & tool holders with dedicated storage for squares, driver bits, and cat’s paw
- Streamlined layout for compact carry
- Optimized for left-side wear (fasteners accessed with left hand)
- OxyLights nylon construction with leather reinforcements
- Made in USA
Occidental Leather 8062 Applications
- Framing tasks needing organized fastener access
- General carpentry where compact storage is preferred
- Left-side wear for non-dominant hand tool retrieval
- Jobsite organization for squares, bits, nail sets, and small tools
Occidental Leather 8062 Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for non-dominant hand access.
- Load tools and fasteners into the designated pockets.
- Confirm the bag is seated securely on the belt.
- Adjust placement for comfortable reach and balance.
Occidental Leather 8062 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" W x 8" H |
| Middle Bag | 8" W x 6" H |
| Outer Bag | 5.5" W x 5.5" H |
| Upper Bag | 4.5" W x 4.5" H |
| Material | Nylon with leather reinforcements |
| Weight | 1.3 lbs |
| Handedness Options | 8062 (Right handed), 8062LH (Left handed) |
| Country of Origin | USA |
Occidental Leather 5061 Description
The 2 Pouch Pro Fastener Bag features an all-leather build with a dedicated tape holster on the left side and a job-ready pocket layout for fasteners and layout tools. With 9 pockets and holders and roomy lower pouches, it provides quick left-hand access to everyday items like a tri-square, cat’s paw, driver bits, and an angle square. Made in the USA.
Occidental Leather 5061 Includes
- (1) 2 Pouch Pro Fastener Bag
Occidental Leather 5061 Features
- All-leather construction for daily jobsite durability
- 9 pockets and holders arranged for efficient fastener and tool access
- Left-side tape holster in place of an upper bag
- Holds angle square, cat’s paw, driver bits, and more
- Available in right-hand (5061) and left-hand (5061LH) layouts
- Made in the USA
Occidental Leather 5061 Applications
- Framing and rough carpentry layouts
- Finish carpentry fastener organization
- General carpentry and remodel tool storage
Occidental Leather 5061 Installation Overview
- Select right-hand (5061) or left-hand (5061LH) orientation to match your setup.
- Slide the pouch onto your work belt through the built-in leather tunnel.
- Position on the left side for fastener access opposite your primary tool bag.
- Load tape, fasteners, and layout tools into dedicated pockets.
- Adjust belt position for comfortable reach before starting work.
Occidental Leather 5061 Specifications
| Material | All leather |
| Pockets & Holders | 9 |
| Main Bag | 9" W x 8" H |
| Outer Bag | 7" W x 5" H |
| Hand Setup | Right-hand 5061 or Left-hand 5061LH |
| Country of Origin | USA |
Occidental Leather 9520 Description
The OxyFinisher Fastener Bag 9520 is a compact, lightweight nylon pouch built for trim, framing, and finish work. Its round-bottom main and outer bags hold shape and offer organized storage for left-hand access tools — including nail sets, tri-square, cat’s paw, driver bits, and a speed square. Includes the Oxy Tool Shield for sharp tool protection. Made in the USA.
Occidental Leather 9520 Includes
- (1) OxyFinisher Fastener Bag
- (1) Oxy Tool Shield
Occidental Leather 9520 Features
- Compact 2-in-1 outer bag adds fastener capacity without bulk
- Reinforced nylon construction with round-bottom bags that hold shape
- Built-in speed square slot for quick access
- Designed for left-side wear to access fasteners with the left hand
- Includes Oxy Tool Shield for safe storage of sharp tools
Occidental Leather 9520 Applications
- Trim carpentry: keep small fasteners and layout tools at hand
- Framing: carry nails, bits, and a speed square efficiently
- Finish work: organized storage for detail tools and hardware
- General carpentry: left-side fastener access for balanced setups
Occidental Leather 9520 Installation Overview
- Slide the bag onto your work belt at the left side (right-handed setups) or right side (left-handed setups).
- Seat the pouch so the round-bottom pockets face outward for easy access.
- Load fasteners and organize tools in the main, outer, and small holders.
- Insert the speed square into the dedicated slot as preferred (inside or outside).
- Place sharp tools in the Oxy Tool Shield and verify comfortable reach.
Occidental Leather 9520 Specifications
| Pockets & Tool Holders | 11 |
| Main Bag | 9.5" W x 7.5" H |
| Outer Bag | 9" W x 6" H |
| Material | Reinforced Nylon with leather reinforcements |
| Weight | 1.0 lbs |
| Handedness | 9520 (Right-handed), 9520LH (Left-handed) |
| Made In | USA |
Occidental Leather 5017DB Description
Upgrade efficiency with the Occidental Leather 5017DB 3 Pouch Pro Tool Bag—a streamlined leather pouch set featuring 10 pockets & holders for core tools. Designed without a tape pocket for lighter setups and available in right- or left-hand layouts.
Occidental Leather 5017DB Includes
- (1) Occidental Leather 5017DB 3 Pouch Pro Tool Bag
Occidental Leather 5017DB Features
- Classic 3-pouch leather tool bag with no tape pocket for a lighter setup
- Double outer bags plus dedicated holders for hammer, pencil, work knife, chisel, torpedo level, and lumber crayon
- Right-hand layout standard; also offered for left-hand builders as 5017DBLH
- Efficient organization with 10 pockets & tool holders
- Made in the USA
Occidental Leather 5017DB Applications
- Daily carry of core hand tools on the jobsite
- Framing, finish work, and general carpentry tool organization
- Right-side tool access for right-handed users; left-hand option for mirrored workflows
- Use with professional tool belts for quick access and productivity
Occidental Leather 5017DB Installation Overview
- Select handedness (5017DB right-hand or 5017DBLH left-hand).
- Slide or attach the bag to your work belt per belt slot/clip configuration.
- Load core tools into dedicated holders and pouches.
- Adjust position on belt for comfortable reach and balance.
- Periodically clean and condition leather to maintain performance.
Occidental Leather 5017DB Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" W x 8" H |
| Outer Bag | 5" W x 5.5" H |
| Weight | 1.9 lbs |
| Material | Leather |
| Tape Pocket | None |
| Handedness | Right-hand (5017DB) or Left-hand (5017DBLH) |
| Made In | USA |
Occidental Leather 8583 Heritage FatLip Nylon Fastener Bag Description
10 in. deep fastener pouch featuring a leather FatLip mouth that stays open and resists abrasion, plus a full leather boot for long-term durability. Patented 2-in-1 outer bag includes an angle square holster, with dedicated sleeves for a tri-square, cat’s paw, and driver bits. Left-hand dominant version available as 8583LH.
Includes
- (1) Heritage FatLip Nylon Fastener Bag (SKU: Occidental Leather 8583)
Key Features
- 10 in. deep main bag for high-capacity storage
- Leather FatLip mouth keeps the bag formed, open, and protected against abrasion
- Full leather boot reinforces the base for rugged jobsite durability
- Patented 2-in-1 outer bag with built-in angle square holster
- Dedicated sleeves/loops for tri-square, cat’s paw, nail sets or driver bits
- Pockets and tool holders: 10
- Made in the USA
Applications
- Organizing and carrying nails, screws, and small fasteners
- Quick access to angle square, driver bits, and layout tools
- Framing, drywall, and general construction tasks
Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 10" W x 10" H |
| Outer Bag | 9" W x 6" H |
| Upper Bag | 5" W x 4.5" H |
| Weight | 1.7 lbs |
| Materials | Heavy-duty nylon with leather FatLip mouth and full leather boot |
| Handedness | Right-hand dominant layout; Left-hand version available as 8583LH |
| Country of Origin | USA |
Occidental Leather 5500 Electrician’s Tool Pouch Description
Enhance your workflow with the Occidental Leather 5500 Electrician’s Tool Pouch, featuring 15 pockets, a flashlight loop, electrical tape chain, quick-release tool snap, and a heavy-duty hammer holder. The tunnel loop mount fits belts up to 3″ wide for secure, on-belt carry. Made in the USA.
Occidental Leather 5500 Includes
- (1) Occidental Leather 5500 Electrician’s Tool Pouch
Occidental Leather 5500 Features
- All-leather construction for durability
- 15 pockets & tool holders for organized access
- Flashlight loop & heavy-duty hammer holder
- Electrical tape chain & quick-release tool snap
- Tunnel loop mount fits belts up to 3″ wide
- Made in the USA
Occidental Leather 5500 Applications
- Daily electrical service work
- Organized on-belt storage for tools
- Maintenance & repair tasks
- Residential & commercial installations
Occidental Leather 5500 Installation Overview
- Slide the tunnel loop over a work belt (up to 3″ wide).
- Position pouch for preferred tool access.
- Load tools into designated pockets & holders.
- Use quick-release snap & tape chain for attachments.
- Confirm secure fit & balance before use.
Occidental Leather 5500 Specifications
| Pockets & Tool Holders | 15 |
| Main Bag Dimensions | 6.5″ W x 6″ H |
| Material | Leather |
| Mount | Tunnel loop; fits belts up to 3″ wide |
| Weight | 1.2 lbs |
| Origin | Made in USA |
Occidental Leather 5018 Description
The Occidental Leather 5018 2 Pouch Pro Tool Bag with Tape Measure Pouch is a right-side tool bag designed for quick access to everyday tools. It includes holders for pencils, utility knife, lumber crayon, chisel, torpedo level, hammer, and a tape holster that fits tapes up to 35″.
Occidental Leather 5018 Includes
- (1) 2 Pouch Pro Tool Bag with Tape Measure Pouch
Occidental Leather 5018 Key Features
- Tool bag layout optimized for right-hand access
- Dedicated holders for pencils, knife, lumber crayon, chisel, torpedo level, and hammer
- Holster fits tape measures up to 35″
- Available in a left-hand version (5018DBLH)
Occidental Leather 5018 Applications
- Daily professional carpentry tool carry
- Framing and layout tasks
- Finish work and trim installation
- General construction tool organization
Occidental Leather 5018 Installation Overview
- Slide the bag onto your work belt.
- Position on the right side for dominant-hand access.
- Load tools into designated pockets and holders.
- Seat your tape measure in the holster.
- Verify balance and adjust placement as needed.
Occidental Leather 5018 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9″ x 8″ |
| Outer Bag | 5″ x 5.5″ |
| Tape Holster | Fits up to 35″ tapes |
| Handedness | Right-hand layout; left-hand option: 5018DBLH |
Occidental Leather 2535 Builders’ Vest Description
Compact vest tool-carry system with balanced weight distribution and unrestricted movement. Organized storage with multiple pockets and holders, plus one 2003 Pocket Shield for sharp tools. Wear alone or with a tool belt for maximum flexibility.
Occidental Leather 2535 Includes
- (1) Builders’ Vest
- (1) 2003 Pocket Shield
- (1) Removable heavy-duty clip-on hammer holder
Occidental Leather 2535 Features
- Freedom from tool clutter with 18 pockets & holders
- Ergonomically designed for even load distribution
- Can be worn with a tool belt; does not interfere with belts
- Fully adjustable straps for a custom fit
- Durable ballistic nylon with leather reinforcements
- One size fits most
- Made in the USA
Occidental Leather 2535 Applications
- General carpentry and framing tool organization
- Remodeling and punch-list work
- Electrical and low-voltage service calls
- Finish work where mobility and access are critical
- Jobsite tasks requiring hands-free fast access to tools
Occidental Leather 2535 Installation Overview
- Loosen straps and put on the vest over work clothing.
- Adjust shoulder and side straps until weight is balanced and secure.
- Load tools into pockets and holders; place sharp tools in the included Pocket Shield.
- Attach the clip-on hammer holder as needed.
- Optionally wear with a tool belt; confirm vest does not impede belt movement.
Occidental Leather 2535 Specifications
| Pockets & Holders | 18 |
| Size | One size fits most |
| Material | Ballistic nylon with leather reinforcements |
| Weight | Approx. 2.5 lbs |
| Color | Black |
| GTIN | 759244223309 |
| Country of Manufacture | USA |
| Includes | 2003 Pocket Shield; clip-on hammer holder |
Occidental Leather 5525 Big Oxy Fastener Bag Description
The Big Oxy Fastener Bag from Occidental Leather delivers a deep, round-bottom main pouch with layered storage for efficient access to fasteners and layout tools. It features 10 pockets/tool holders, a tape pocket that fits up to a 35’ tape, and includes the Oxy Tool Shield for sharp tool protection. Made in the USA.
Occidental Leather 5525 Includes
- (1) 5525 Big Oxy Fastener Bag
- (1) 2003 Oxy Tool Shield
Occidental Leather 5525 Key Features
- Round-bottom design adds structure and increases capacity
- 10 pockets & tool holders optimized for fasteners and layout tools
- Tape pocket holds tapes up to 35′
- Includes Oxy Tool Shield to protect sharp tools, bags, and body
- Right-hand layout; typically worn on the left side
- Made in the USA
Occidental Leather 5525 Applications
- Framing and general carpentry fastener carry
- Layout and measuring tools organization on the belt
- Jobsite tasks requiring frequent access to nails, screws, and bits
- Daily contractor use where durable leather storage is preferred
Occidental Leather 5525 Installation Overview
- Thread the bag’s tunnel onto your work belt.
- Position on the left side for right-handed use.
- Load fasteners and layout tools into designated pockets/holders.
- Place sharp tools in the included Oxy Tool Shield.
- Check balance and adjust placement for comfortable reach.
Occidental Leather 5525 Specifications
| Pockets & Tool Holders | 10 |
| Weight | 2.5 lbs |
| Main Bag | 11" W x 9" H |
| Outer Bag | 8.5" W x 6" H |
| Upper Bag | 4.5" W x 4.5" H |
| Material | Leather |
| Tape Pocket | Fits up to 35′ tape |
| Handedness | Right-handed layout; worn on left side |
| Includes | 2003 Oxy Tool Shield |
| Country of Origin | USA |
Occidental Leather 8060 Description
The Occidental Leather 8060 OxyLights 3 Pouch Fastener Bag is a lightweight nylon pouch purpose-built for framing and general carpentry. It features dedicated holders for a 1" blade square, angle square, cat’s paw, driver bits, and more, keeping left-hand fasteners and small tools organized and within reach.
Occidental Leather 8060 Includes
- (1) OxyLights 3 Pouch Fastener Bag (8060)
Occidental Leather 8060 Key Features
- Lightweight OxyLights nylon construction for daily comfort
- 3-pouch layout: main, outer, and upper bags for organized access
- Tool-specific holders for blade square, angle square, cat’s paw, and driver bits
- Designed as a left-side fastener bag for framing and general carpentry
- Reinforced with leather at stress points for durability
- Made in the USA
Occidental Leather 8060 Applications
- Framing: Keep nails, layout tools, and bits organized
- General carpentry: Quick access to fasteners and small tools
- Jobsite setup: Left-hand fastener storage for balanced belt systems
Occidental Leather 8060 Installation Overview
- Select handedness and position this fastener bag on the left side for right-handed setups.
- Slide the bag onto a compatible work belt and secure in preferred position.
- Load fasteners and layout tools into dedicated pockets/holders.
- Verify balance and accessibility; adjust pouch position as needed.
Occidental Leather 8060 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.2 lbs |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Nylon with leather reinforcement |
| Handedness | Right- or Left-handed versions available |
| Colors | Hunter Green, Black, Deep Red (varies by SKU) |
| Made In | USA |
Occidental Leather 9504 Description
The Clip-On 7 Nylon Pouch delivers cost-efficient tool and fastener organization in a compact, lightweight design. With 7 pockets and holders for pencils, a utility knife, and an angle square, its ideal for small jobs, repairs, or DIY weekend projectsand clips quickly to belts or waistbands up to 2" wide. Made in the USA.
Occidental Leather 9504 Includes
- (1) Occidental Leather 9504 Clip-On 7 Nylon Pouch
Occidental Leather 9504 Features
- Cost-efficient fastener and tool management
- Versatile multi-pouch layout with holders for pencils, utility knife, and angle square
- Quick clip-on attachment to belts or waistbands up to 2" wide
- Lightweight, jobsite-tough nylon construction
- Made in the USA
Occidental Leather 9504 Applications
- Small tasks and punch-list work
- Trim and finish carpentry essentials
- Maintenance and repair duties
- Weekend DIY projects
- Service calls where minimal tools are needed
Occidental Leather 9504 Installation Overview
- Attach: Clip the pouch to a belt or waistband up to 2" wide.
- Load: Place fasteners and small tools into the main and outer bags.
- Organize: Use dedicated holders for pencil, utility knife, and angle square.
- Check: Ensure the clip is fully seated and the pouch is secure before use.
- Remove: Unclip when finished and store in a dry place.
Occidental Leather 9504 Specifications
| Pockets & Tool Holders | 7 |
| Main Bag | 7.5" W x 6" H |
| Outer Bags | 5" W x 5.5" H |
| Fits Belt Width | Up to 2" |
| Material | Nylon |
| Weight | 0.7 lb |
| Made In | USA |
| GTIN | 759244175004 |
Occidental Leather 2575 Oxy Pro Work Vest Description
Tool and fastener organization in a vest—no belt, no bags. The 2575 Oxy Pro Work Vest delivers even load distribution for comfort, an open-back, wide-shoulder design for airflow, and intuitive storage for tape, speed square, pencils, gloves, notebook, and a torpedo level. Stress points, edges, and pockets are reinforced with nylon for long-term durability. Equipped with two Oxy Tool Shields for safe storage of sharp tools.
Occidental Leather 2575 Includes
- (1) 2575 Oxy Pro Work Vest
- (2) 2003 Oxy Tool Shield
Occidental Leather 2575 Features
- Maximum comfort with ergonomic, even load distribution
- Freedom of movement with wide-shoulder, open-back design
- Functional organization with 28 pockets and holders
- Nylon-reinforced stress points, edges, and pockets for durability
- Includes two Oxy Tool Shields for knives, chisels, pliers, etc.
- One size fits most; left-handed option available as 2575LH
Occidental Leather 2575 Applications
- General carpentry and framing
- Remodeling and finish work
- Electrical, HVAC, and service trades
- Jobsite organization without a traditional belt
Occidental Leather 2575 Installation Overview
- Adjust vest straps for a balanced, comfortable fit.
- Attach Oxy Tool Shields where desired for sharp tool protection.
- Load tools into designated pockets for fast access.
- Re-check balance and fine-tune straps to evenly distribute weight.
Occidental Leather 2575 Specifications
| Pockets & Tool Holders | 28 |
| Size | One size fits most |
| Includes | (2) 2003 Oxy Tool Shields |
| Left-Handed Option | 2575LH |
| Approx. Weight | 2.9 lb |
Occidental Leather 9521 Oxy Finisher Nylon Tool Bag
Discover the compact, right-side Oxy Finisher bag built for trim, light framing & finish work. Two-ply foam-core nylon/leather construction keeps round-bottom main & outer bags structured whether empty or loaded, with organized storage across 12 pockets & holders.
Includes
- (1) Occidental Leather 9521 Oxy Finisher Nylon Tool Bag
- (1) 2003 Oxy Tool Shield
Key Features
- Compact, round-bottom design ideal for trim & finish tasks
- Two-ply foam-core main & outer bags hold shape loaded or empty
- Clip-on leather tab for tape or accessory pouches
- Steel hammer holder for rugged durability
- Right-hand layout; left-hand model available as 9521LH
- Includes 2003 Oxy Tool Shield for sharp tool protection
- 12 pockets & tool holders for efficient organization
- Made in the USA
Applications
- Trim carpentry & cabinetry installation
- Light framing and punch-list tasks
- Finish work tool organization on the right-hand side
- Safe storage of chisels, knives & sharp tools using Oxy Tool Shield
- Everyday carry for pencils, utility knife, driver bits & nail sets
Installation Overview
- Slide the bag onto a compatible work belt.
- Wear on the right side for right-handed use; choose 9521LH for left-handed.
- Attach the clip-on leather tab or accessory pouches as needed.
- Place the 2003 Oxy Tool Shield in the inner pocket for sharp tool protection.
- Load tools into pockets & holders and confirm secure fit.
Specifications
| Pockets & Tool Holders | 12 |
| Main Bag | 9.5" W x 7.5" H |
| Outer Bag | 6.5" W x 5.5" H |
| Material | Two-ply foam-core nylon with leather components |
| Orientation | Right-handed (Left-handed model: 9521LH) |
| Weight | 1.0 lbs |
| Made In | USA |
| Includes | 2003 Oxy Tool Shield |
Occidental Leather 5526 Description
The Big Oxy Leather Tool Bag (5526) features a large round-bottom design that boosts capacity while keeping structure. Built for right-side wear, it organizes essentials with 16 pockets and comes with the 2003 Oxy Tool Shield for safe storage of sharp tools. Made in the USA.
Occidental Leather 5526 Includes
- (1) Occidental Leather 5526 Big Oxy Leather Tool Bag
- (1) 2003 Oxy Tool Shield
Occidental Leather 5526 Key Features
- Round-bottom leather construction adds volume and resists collapse
- 16 total pockets/tool holders for organized storage
- Torpedo level slot, pencil & chisel pockets, and bit holders
- Includes 2003 Oxy Tool Shield for knives, chisels, or cutters
- Right-hand layout; not available in a left-hand version
- Made in the USA
Occidental Leather 5526 Applications
- Framing and general carpentry tool carry
- Finish work and remodeling tasks
- Organizing fasteners and everyday jobsite tools
- Right-side pouch for professional work belts
Occidental Leather 5526 Installation Overview
- Slide the pouch onto a compatible work belt.
- Wear on the right side for proper layout.
- Place the Oxy Tool Shield in its sleeve.
- Load tools into main, outer, and dedicated holders.
Occidental Leather 5526 Specifications
| Pockets & Tool Holders | 16 |
| Main Bag | 10" W x 9" H |
| Outer Bag | 5" W x 5.5" H |
| Material | Leather |
| Weight | 2.4 lbs |
| Handedness | Right-side wear; no left-hand model |
| Included Accessory | 2003 Oxy Tool Shield |
| Made In | USA |
| SKU | 5526 |
Occidental Leather 6101 Description
Compact all-leather fastener bag designed for trim and finish work, and suitable for light framing. Streamlined layout keeps essentials close; no holder for an angle square. Also available in a left-hand version (6101LH).
Occidental Leather 6101 Includes
- (1) 6101 Pro Trimmer Leather Fastener Bag
Occidental Leather 6101 Features
- Trim-ready compact design ideal for finish work and interior tasks
- Tool-specific holders for nail sets/driver bits, 1” blade square, and cat’s paw sleeve
- Streamlined layout reduces bulk while organizing fasteners and tools
- Durable, professional-grade leather construction — Made in USA
- Fastener-bag layout intended for wear on the left side
Occidental Leather 6101 Applications
- Trim and finish carpentry
- Light framing and punch-list work
- Interior installation and layout tasks
- General fastener and small tool organization
Occidental Leather 6101 Installation Overview
- Select left-side placement per fastener-bag layout.
- Slide the bag’s tunnel onto your work belt and secure.
- Load fasteners and hand tools into designated holders.
- Verify comfortable reach and balance before use.
Occidental Leather 6101 Specifications
| Pockets & Tool Holders | 8 |
| Weight | 1.5 lbs |
| Main Bag | 7.5" x 8" |
| Outer Bag | 5.5" x 5" |
| Material | Leather |
| Country of Manufacture | USA |
| Angle Square Holder | Not included |
Occidental Leather 5564 Description
A belt-worn fastener bag featuring an all-leather main pouch paired with a divided industrial nylon double outer bag. Designed with six black leather tool holders and four total pouches, it provides ample capacity for wire nuts, conduit couplers, and small fittings while keeping frequently used tools at hand on the left side.
Occidental Leather 5564 Includes
- (1) Occidental Leather 5564 Fastener Bag
Occidental Leather 5564 Key Features
- Hybrid build: leather main bag with dual-compartment industrial nylon outer pouch
- Four total pouches for fasteners and small parts
- Six black leather tool holders for bits, cat’s paw, and layout tools
- Left-side wear for fastener access with the non-dominant hand
- Made in the USA
Occidental Leather 5564 Applications
- Electrical work: organize wire nuts, couplers, and connectors
- General carpentry: keep layout tools and small fasteners accessible
- Remodeling and finish tasks: carry driver bits and small fittings
- Jobsite service work: compact storage for frequently used parts
Occidental Leather 5564 Installation Overview
- Thread onto a compatible work belt.
- Position on the left side for fastener access with the non-dominant hand.
- Load fasteners and tools into the main and divided outer pouches.
- Secure and adjust for comfortable reach and balance.
Occidental Leather 5564 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" x 7.5" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Full-grain leather & industrial nylon |
| Weight | 1.8–1.9 lbs (site listings vary) |
| Hand Orientation | Left side / non-dominant hand access |
| Country of Origin | USA |
Occidental Leather 6102 Description
Compact all?leather right-side tool pouch designed for trim & finish work with capacity for light framing. Features internal holders for pencil, knife, lumber crayon, and chisel, plus an exterior tool snap and heavy-duty hammer loop.
Occidental Leather 6102 Includes
- (1) Occidental Leather 6102 Pro Trimmer Tool Bag
Occidental Leather 6102 Key Features
- 9 pockets & tool holders for efficient organization
- Exterior tool snap and heavy-duty hammer loop for quick access
- Right-hand oriented layout — worn on the right side
- Durable, all-leather construction
- Made in the USA
Occidental Leather 6102 Applications
- Trim and finish carpentry
- Cabinetry and installation work
- Light framing and general carpentry tasks
Occidental Leather 6102 Specifications
| Pockets & Tool Holders | 9 |
| Main Tool Bag | 8" W x 7.5" H |
| Outer Bag | 6" W x 5.5" H |
| Weight | 1.4 lbs |
| Wear Position | Right side (right-hand access) |
| Material | All leather |
| Country of Origin | USA |
Occidental Leather 5070 Pro Leather Drywall Pouch Description
Large, all-leather dominant-side pouch tailored for drywallers and lathers. Offers exceptional tool organization for frequently used right-hand tools—circle cutters, snips, knives, Surform®, saws, pencils—with rugged durability.
Occidental Leather 5070 Includes
- (1) Occidental Leather 5070 Pro Leather Drywall Pouch
Occidental Leather 5070 Features
- All-leather construction for long-term jobsite performance
- 11 pockets & holders for drywall and lathing tools
- Main bag sized for daily use: 8" W x 6" H
- Right-side dominant layout for tools most accessed with the right hand
- Made in the USA
Occidental Leather 5070 Applications
- Drywall finishing and installation tool carry
- Lathing tasks requiring organized access to cutters and snips
- General jobsite storage for saws, knives, Surform®, and pencils
- Right-hand dominant setup for efficient workflow
Occidental Leather 5070 Installation Overview
- Slide pouch onto a compatible work belt.
- Position on the right side for dominant-hand access.
- Load tools into designated pockets and holders.
- Secure and test fit; adjust belt for comfort.
- Inspect stitching and rivets periodically for wear.
Occidental Leather 5070 Specifications
| Pockets & Holders | 11 |
| Main Bag Dimensions | 8" W x 6" H |
| Material | All-leather |
| Wear Side | Right-hand dominant |
| Weight | 1.4 lbs (see review note) |
| Made In | USA |
| Model/SKU | 5070 |
Occidental Leather B5611 Description
The Occidental Leather B5611 Green Builder Fastener Bag in classic black delivers lightweight, all?leather durability with smart storage for everyday jobsite tools. It features a side?by?side 35' tape holster, angle square holster, external sleeve pockets, drill bit holders, and includes an Oxy Tool Shield for sharp tool protection. Reinforced stress points on the main bag boost longevity. Made in the USA.
Occidental Leather B5611 Includes
- (1) Right?handed Green Builder Fastener Bag — Black
- (1) Oxy Tool Shield
Occidental Leather B5611 Features
- All?leather construction with classic black finish
- Side?by?side 35' tape holster plus angle square holster
- Upper bag with external sleeve pockets and drill bit holsters
- Integrated Oxy Tool Shield for sharp tools
- Reinforced back wall at stress points for long service life
- 10 total pockets/tool holders
- Made in the USA
Occidental Leather B5611 Applications
- Framing and carpentry fastener and tool carry
- Organizing tape, angle square, bits, and small hand tools
- General construction and remodel jobsite storage
- Left?side wear for right?handed workflows
Occidental Leather B5611 Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for right?hand access.
- Load fasteners and tools into designated pockets/holsters.
- Secure tape and angle square in their holsters; place sharp tools in the Oxy Tool Shield.
Occidental Leather B5611 Specifications
| Pockets & Tool Holders | 10 |
| Weight | 2.1 lbs |
| Main Bag | 10" W x 9" D |
| Outer Bag | 6.5" W x 6" H |
| Upper Bag | 4.5" W x 4" H |
| Material | All?leather, black |
| Orientation | Right?hand (left?hand model B5611LH available) |
| Included | Oxy Tool Shield |
| Country of Origin | USA |
Occidental Leather 9085 Stronghold Nylon Tool Case Description
Purpose-built for tool organization, the Occidental Leather 9085 Stronghold Nylon Tool Case provides 18 pockets and tool holders with four interior walls for an upright, structured layout. The bottom is leather-lined for added durability — ideal for finish carpenters and plant engineers.
Includes
- (1) Occidental Leather 9085 Stronghold Nylon Tool Case
- (2) 2003 Oxy Tool Shield
Key Features
- Strictly organized case layout for tools
- 18 total pockets and holders for screwdrivers, chisels, bits, and more
- Leather-lined base for longevity and shape retention
- Four interior walls maintain structure and upright storage
- Includes 2 Oxy Tool Shields for safe storage of sharp tools
- Not available in a left-hand model
- Made in the USA
Applications
- Finish carpentry tool organization and trim work
- Plant engineering and maintenance tasks
- Service technicians needing compact, upright access
- Cabinetry installation and fine woodworking
Installation Overview
- Slide the tool case onto a compatible work belt.
- Place Oxy Tool Shields in designated holsters.
- Organize tools within the 18 pockets for balanced weight.
- Secure sharp tools in the shields and check access to frequently used items.
- Confirm the case sits upright and stable during use.
Specifications
| Pockets & Tool Holders | 18 |
| Main Bag | 9" W x 8" H |
| Outer Bag | 5.5" W x 5.5" H |
| Interior Walls | 4 (rigid) |
| Base | Leather-lined |
| Includes | (2) 2003 Oxy Tool Shield |
| Country of Manufacture | USA |
Occidental Leather B8064 Description
The OxyLights™ Fastener Bag with Double Outer Bag delivers compact, high-capacity organization for framing and general carpentry. Its patented 2-in-1 outer pouch integrates an angle square holster between the main and outer compartments, while dedicated sleeves keep a tri-square, cat’s paw, nail sets and driver bits close at hand. Designed for right-handed setups, it is worn on the left side.
Occidental Leather B8064 Includes
- (1) OxyLights Fastener Bag with Double Outer Bag
Occidental Leather B8064 Key Features
- 4-bag layout: main, outer, upper, and patented 2-in-1 outer pouch
- Integrated angle square holster between main and outer bags
- Dedicated holders for tri-square, cat’s paw, driver bits, and nail sets
- Right-handed layout — fastener bag is worn on the left side
- Industrial nylon with leather reinforcements for lightweight durability
- Pockets & tool holders: 10
- Made in USA
Occidental Leather B8064 Applications
- Framing and general carpentry tool and fastener organization
- Layout work requiring quick access to angle square and measuring tools
- Daily carry of nails, screws, and small hand tools on the jobsite
Occidental Leather B8064 Installation Overview
- Thread onto a compatible work belt.
- Position on the left side for right-handed setups.
- Load fasteners and tools into the main, outer, and upper pouches.
- Stow angle square in the integrated holster; place small bits in dedicated sleeves.
- Adjust placement for comfort and balance during use.
Occidental Leather B8064 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Industrial nylon with leather reinforcements |
| Handedness | Right-handed layout (worn on left side) |
| Country of Manufacture | USA |
Occidental Leather 5023B Two Pouch Bag Description
Compact, all-leather two-pouch fastener bag with an open layout and no internal tool holders. Built for straightforward utility and long-term durability for tradespeople who prefer a simple, serviceable pouch.
Includes
- (1) Two Pouch Bag (5023B)
Key Features
- All-leather construction for rugged durability
- Two-pouch layout for fasteners and small tools
- No internal tool holders — open, customizable interior
- Compact profile for streamlined setups
- Made in the USA
Applications
- Carrying fasteners, anchors, and small parts
- Holding small hand tools for light installs and service calls
- Trim, punch-list, and minimalist tool belt setups
Installation Overview
- Choose pouch position on your work belt.
- Slide the bag onto the belt through the integrated hanger/slot.
- Load fasteners and small tools into main and outer pouches.
- Confirm comfortable reach and balance before use.
Specifications
| Material | Full leather |
| Main Bag | 9" W x 8" H |
| Outer Bag | 5.5" W x 5.5" H |
| Weight | 1.3 lbs |
| Layout | Two-pouch; no internal tool holders |
| Country of Manufacture | USA |
Showing 40/51
