Holiday Gift Center

Occidental Leather 5500 Key Features

• All leather construction for durability
• 15 pockets and tool holders for everyday electrical tools
• Flashlight loop, electrical tape chain, and quick release tool snap
• Heavy duty hammer holder
• Tunnel loop mount fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5500 Applications

• Daily electrical service and installation
• Organized belt carry for screwdrivers, pliers, and testers
• Maintenance and facility repair work
• Remodeling and jobsite troubleshooting

Occidental Leather 5500 Installation Overview

1. Thread work belt through the tunnel loop; fits up to 3 in. width.
2. Load core tools into dedicated pockets and sleeves.
3. Attach small tools to the quick release snap as needed.
4. Hang electrical tape rolls on the chain for quick access.
5. Confirm balance and secure fit before use.

Occidental Leather 5018 Key Features

• Right-hand layout with holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape measure holster fits tapes up to 35 ft
• Durable full-grain leather construction
• Two main pouches for fast access and organization
• Available in a left-hand version (5018DBLH / 5018LH)

Occidental Leather 5018 Applications

• Carpentry and framing tool carry
• Finish work and trim installation
• General construction and remodeling
• Measuring, marking, and layout tasks
• Jobsite tool organization on a work belt

Occidental Leather 5018 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into designated holders and pouches.
4. Place tape in the built-in holster.
5. Verify balance and adjust placement for comfort.

Occidental Leather 5525 Key Features

• Round-bottom design increases internal volume and stability
• 10 pockets and holders optimized for fasteners and layout tools
• Tape pocket fits tapes up to 35 ft
• Includes Oxy Tool Shield to protect sharp tools, bags, and body
• Right-hand layout; worn on the left side
• Premium leather construction; Made in the USA

Occidental Leather 5525 Applications

• Fastener storage for framing and carpentry tasks
• Organizing layout tools like squares and bits
• Measuring and marking with quick tape access
• Daily jobsite carry on a work belt

Occidental Leather 5525 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed use.
3. Insert the Oxy Tool Shield into the designated holder.
4. Load fasteners and tools into the appropriate pockets.
5. Confirm secure fit and balance before use.

Occidental Leather 8060 Features

• 3-pouch layout for fasteners and small tools
• Tool-specific holders for blade square, angle square, cat's paw, and bits
• Lightweight OxyLights construction with leather reinforcements
• Optimized for framing and general carpentry
• Made in USA

Occidental Leather 8060 Applications

• Framing: Keep nails, layout square, and bits at hand
• General Carpentry: Organized storage for everyday fasteners
• Layout Work: Dedicated blade square and angle square holders
• Punch list tasks: Compact carry of small tools and hardware

Occidental Leather 8060 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed setups or per preference.
3. Load fasteners and layout tools into the main, outer, and upper pouches.
4. Use dedicated holders for blade square, angle square, bits, and cat's paw.
5. Check balance and retention before starting work.

Occidental Leather 9504 Key Features

• Cost efficient organization for small tools and fasteners
• Seven-pocket, multi-pouch design with holders for pencil, utility knife, and angle square
• Heavy-duty clip attaches quickly to belts or waistbands
• Fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9504 Applications

• Small repairs and punch list tasks
• Trim and finish work
• General maintenance rounds
• Weekend DIY projects

Occidental Leather 9504 Installation Overview

1. Load tools and fasteners into main and outer pockets.
2. Clip the pouch to your belt or waistband.
3. Ensure clip is fully engaged; adjust placement for comfort.

Key Features

• 12 pockets and tool holders in a compact, jobsite-efficient layout
• Two-ply foam-core construction maintains structure when empty or loaded
• Clip-on leather tab for tape or accessory pouches
• Steel hammer loop; interior leather tool sleeves
• Right-hand layout; left-hand model available as 9521LH

Applications

• Trim carpentry and finish work
• Light framing tasks
• Cabinetry and punch-list work
• Right-side tool carry for dominant-hand access

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for standard orientation.
3. Attach clip-on leather tab accessories as needed.
4. Insert the Oxy Tool Shield for chisels or knives.
5. Load tools and check balance and access.

Occidental Leather 5526 Key Features

• Round-bottom leather construction adds volume and resists collapse
• Tool-specific storage: torpedo level slot, bit holders, pencil and chisel pockets
• Right-hand layout; worn on the right side
• Includes Oxy Tool Shield for safe carry of sharp tools
• Not available in a left-hand model

Occidental Leather 5526 Applications

• Carpentry and framing tool organization on a work belt
• Right-hand access to frequently used tools
• Jobsite fastener and small tool storage
• General construction and remodeling tasks

Occidental Leather 5526 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for dominant-hand access.
3. Insert the Oxy Tool Shield into the designated pocket.
4. Load tools into dedicated holders and pockets.
5. Check balance and security before working.

Occidental Leather 6101 Features

• Trim-ready compact leather design for finish work
• Tool-specific holders for nail sets, blade square, and cat's paw
• Streamlined layout reduces bulk and keeps tools organized
• No angle square holster
• Made in USA
• Left-hand version available as 6101LH

Occidental Leather 6101 Applications

• Trim and finish carpentry
• Light framing tasks
• Interior remodel and punch list work
• Organizing fasteners and layout tools on the left side

Occidental Leather 6101 Installation Overview

1. Attach the bag securely to your work belt.
2. Load fasteners and layout tools into dedicated pockets.
3. Wear on the left side for easy left-hand access.

Occidental Leather 5564 Key Features

• All leather main bag with divided nylon double outer pouch
• Six black leather tool holders; four pouches total
• Optimized for wire nuts, couplers, and small fasteners
• Left side wear for fast access with the left hand
• Full grain leather and industrial nylon construction

Occidental Leather 5564 Applications

• Organizing and carrying fasteners and small parts
• Keeping layout and marking tools at hand
• Electrical and mechanical fittings storage
• Daily jobsite use with hybrid leather and nylon durability

Occidental Leather 5564 Installation Overview

1. Slide the belt loop over your work belt.
2. Position on the left side for non dominant hand access.
3. Distribute tools and fasteners among the divided pouches.
4. Secure frequently used layout tools in the leather holders.

Occidental Leather 6102 Key Features

• 9 total pockets and tool holders for finish essentials
• All-leather construction for durability
• Interior sleeves for pencil, knife, chisel, and lumber crayon
• Exterior tool snap clip and heavy-duty hammer loop
• Right-hand layout; worn on the right side
• Made in the USA

Occidental Leather 6102 Applications

• Trim and finish carpentry
• Cabinetry and installation work
• Light framing tasks
• Everyday carry for right-handed tool access

Occidental Leather 6102 Installation Overview

1. Slide pouch onto your work belt.
2. Position on the right side for optimal access.
3. Load primary tools into main and outer bags.
4. Place pencil, knife, chisel, and crayon in interior holders.
5. Secure hammer in loop and clip accessory to the tool snap.

Occidental Leather B5611 Features

• All leather construction with classic black finish
• Integrated Oxy Tool Shield for sharp tools
• Upper bag with sleeve pockets and drill bit holsters
• Side by side 35 ft tape holster and angle square holster
• Reinforced back wall at stress points
• Pockets & tool holders: 10
• Available left-hand version: B5611LH

Occidental Leather B5611 Applications

• Fastener and small tool organization for framing and carpentry
• Quick access to tape, angle square, and drill bits
• Left-side wear for tools commonly accessed with the left hand

Occidental Leather 9085 Features

• Purpose-built tool organization in a compact case
• 18 pockets and tool holders for screwdrivers, chisels, bits, and more
• Leather-lined bottom enhances durability and shape retention
• Four rigid interior walls keep tools upright
• Includes 2 Oxy Tool Shields for sharp tool protection
• Made in the USA

Occidental Leather 9085 Applications

• Finish carpentry tool organization
• Plant engineering and maintenance kits
• On-the-go tool access for service professionals
• Upright storage for hand tools and accessories

Occidental Leather 9085 Installation Overview

1. Load tools into dedicated pockets and holders.
2. Place sharp tools in the included Oxy Tool Shields.
3. Attach the case securely to your work belt.
4. Arrange tools upright using interior dividers for quick access.

Occidental Leather B8064 Features

• Patented 2-in-1 outer pouch with angle square holster
• Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
• Four-bag layout for layered storage
• Holds fasteners and tools commonly accessed with the left hand
• Made in USA

Occidental Leather B8064 Applications

• Framing: Keep nails, square, and layout tools organized
• General carpentry: Quick access to bits, nail sets, and cat's paw
• Layout work: Integrated angle square holster for fast measurement
• Jobsite organization: Layered pouches separate fasteners and small tools

Occidental Leather B8064 Installation Overview

1. Select right- or left-handed variant to match your setup.
2. Slide the bag onto a compatible work belt and secure.
3. Position fastener bag on the left side for right-handed users; right side for left-handed users.
4. Load fasteners and layout tools into the designated sleeves and pouches.
5. Verify comfortable reach and adjust placement as needed.

Occidental Leather 5023B Key Features

• Two-pouch leather bag with open, holder-free layout
• Durable full-leather construction for long service life
• Streamlined design for fasteners and small tools
• Made in the USA
• Lightweight and compact for everyday carry

Occidental Leather 5023B Applications

• Fastener storage for carpentry and framing
• Small tool organization for service and maintenance
• Trim and finish work where a compact pouch is preferred
• General jobsite use with minimal bulk

Occidental Leather 5023B Installation Overview

1. Place the pouch on your work belt or system per your preferred layout.
2. Load fasteners or small tools into the main and outer pockets.
3. Adjust placement for comfortable access during work.

Occidental Leather 5085 Key Features

• 17 pockets and holders for organized storage inside and out
• Divided interior for separated, easy-to-reach tool access
• Quick-release snap and strap for electrical tape
• Holster fits a 35 ft x 1 in tape measure
• Constructed from 8 oz top grain leather; Made in USA
• Tunnel loop fits up to a 3 in work belt

Occidental Leather 5085 Applications

• Organizing hand tools for jobsite or shop use
• Carrying screwdrivers, pliers, knives, chisels, markers, and strippers
• Holding torpedo level, hammer, and tape measure
• Attaching to belts up to 3 in for hands-free access

Occidental Leather 5085 Installation Overview

1. Thread a work belt (up to 3 in wide) through the tunnel loop.
2. Position the case at preferred location on your belt.
3. Load tools into divided pockets for balanced weight.
4. Secure tape to the strap and attach items to the quick-release snap as needed.
5. Verify pockets and snap are closed before use.

Occidental Leather 5024 Features

• Extra deep 10 in open pouch for maximum capacity
• Full grain leather construction for long term durability
• Minimalist design without internal tool holders
• Belt mount for easy integration with tool belts
• Made in the USA

Occidental Leather 5024 Applications

• Carrying fasteners and hardware
• Stowing bulky or odd shaped tools
• General purpose jobsite carry on a work belt

Occidental Leather 5024 Installation Overview

1. Slide the pouch onto your work belt through the belt loop.
2. Position for preferred reach on dominant or opposite side.
3. Load tools or fasteners into the main pocket.
4. Adjust load for balance and secure carry.

Occidental Leather B5018DBLH Features

• 11 pockets and tool holders for common carpentry tools
• Main bag 9 x 8; outer bags 5 x 5.5 for organized access
• Integrated tape holster fits tapes up to 35 ft
• Premium black leather construction; left hand model
• Made in the USA

Occidental Leather B5018DBLH Applications

• Carry and organize chisels, knives, pencils and markers
• Secure holster for 35 ft tape measures
• Hold torpedo level and hammer for framing and finish work
• Left-side wear for left-hand tool access

Occidental Leather B5018DBLH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the left side for left-hand access.
3. Load tools into designated pockets and holders.
4. Place tape measure in the built-in holster.
5. Verify balance and adjust belt for comfort.

Occidental Leather 5008SM Key Features

• Bridle leather, custom tanned in the USA
• Edge stitched for strength and clean look
• Heavy duty steel roller buckle with nickel finish
• 1.5 in. width for everyday wear
• Made in the USA

Occidental Leather 5008SM Applications

• Everyday pant support for workwear
• Jobsite use where a durable leather belt is preferred
• Holds small clip-on accessories compatible with pant belts

Occidental Leather 5008SM Installation Overview

1. Measure current belt from buckle end to most-used hole.
2. Select the size closest to that mid-range measurement.
3. If no belt to measure, add 4 in. to pant waist for an estimate.
4. Thread belt through pant loops and fasten with buckle.

Occidental Leather 8068 Features

• Two-compartment main bag with drill/screw gun holster
• Patented 2 in 1 outer pouch adds storage without bulk
• Right-side layout; square edge to the rear
• Holders for driver bits and pencil
• Leather sleeve for Clip-On accessories
• Rafter square slot behind outer pouch
• Pocket and tool holders: 9
• Weight: 1.25 lbs
• Made in the USA

Occidental Leather 8068 Applications

• Metal framing and stud work tool carry
• Organizing drill, bits, and quick-release clamps
• Keeping rafter square accessible on belt
• Right-side belt-mounted storage for cordless tools

Occidental Leather 8068 Installation Overview

1. Slide bag onto a work belt up to 3 in wide.
2. Position on the right side with square edge to rear.
3. Seat drill or screw gun in the holster.
4. Load bits, pencil, and clamps into designated pockets.
5. Place rafter square in the rear slot and check balance.

Occidental Leather B8017DBLH Key Features

• Left handed layout worn on the left side for quick access
• Holders for pencils, work knife, chisel, level, and lumber crayon
• Heavy duty hammer loop for secure carry
• OxyRed leather reinforced corners and internal holders for durability
• Lightweight OxyLights hybrid nylon and leather construction
• Three pouch design for compact organization
• Made in USA

Occidental Leather B8017DBLH Applications

• Organizing everyday carpenter and framer hand tools
• Left side carry on work belts and belt systems
• Keeping pencils, knives, chisels, and levels at the ready
• Jobsite use where lightweight yet durable storage is needed
• General construction and finishing tasks

Occidental Leather B8017DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the belt and adjust placement for comfort.
4. Load tools into dedicated holders and pouches.
5. Confirm hammer loop and tools are seated securely before use.

Occidental Leather 8584 Key Features

• 10 in deep main pouch with structured FatLip leather mouth
• Full leather boot for rugged longevity
• 13 pockets and tool holders for everyday layout tools
• Right-side layout; left-hand version available as 8584LH
• Made in the USA

Occidental Leather 8584 Applications

• Organizing and carrying hand tools on a tool belt
• Framing and general carpentry tasks
• Remodeling and jobsite maintenance work
• Right-hand dominant tool layouts

Occidental Leather 8584 Installation Overview

1. Slide the bag onto a compatible work belt through the leather belt slot.
2. Position on the right side for right-hand use (or choose 8584LH for left-hand use).
3. Load tools by category into interior and exterior holders.
4. Secure any clips or add-on holders as needed and check balance.

Occidental Leather B5612 Features

• Light-weight, classic black all leather construction
• External leather hammer holder and double outer bags
• Internal pockets for level, chisel, drill bits, knife, pencils, and lumber crayon
• Reinforced back wall at stress points for durability
• Right-side wear layout; left-hand version available as B5612LH
• Made in USA

Occidental Leather B5612 Applications

• Organizing hand tools for carpentry and framing
• Quick-access storage for chisels, knives, pencils, and bits
• Carrying levels and small measuring tools
• General construction and remodel tool carry

Occidental Leather B5612 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into main and outer pockets; place sharp tools in the Oxy Tool Shield.
4. Adjust placement for comfort and balanced weight.

Occidental Leather B8017DB Key Features

• 3-pouch layout for compact organization
• Dedicated tool holders for chisel, knife, level, pencils, and lumber crayon
• Heavy-duty hammer loop for secure carry
• Main bag corners reinforced with OxyRed leather
• Right-hand layout; left-hand model available

Occidental Leather B8017DB Applications

• Daily carry and organization of essential hand tools
• Carpentry and framing tasks needing quick tool access
• Finish work where compact, lightweight storage is preferred
• Jobsite use with a compatible work belt

Occidental Leather B8017DB Installation Overview

1. Attach the tool bag to a compatible work belt.
2. Position on the right side for right-hand layout.
3. Load tools into dedicated holders and pouches.
4. Check rivets and stitching; ensure secure fit before use.

Key Features

• Popular 3 pouch pro layout without a tape pocket
• Double outer bags for added capacity and organization
• Tool holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Left handed configuration; worn on the left side
• Made in the USA

Applications

• Carpentry and framing tool organization
• General construction and remodeling
• Finish work tool carry
• Jobsite hand tool access and storage

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders and pouches.
4. Check balance and tighten belt for a secure fit.