Occidental Leather
Occidental Leather 2500 Stronghold SuspendaVest
$214.90
Unit price perOccidental Leather 2500 Stronghold SuspendaVest Description
Build a belt—free carry system with the Stronghold SuspendaVest. The quick–disconnect 3" leather belting accepts compatible tunnel–loop tool bags, while wide Dri–Lex® padded shoulders and adjustable straps provide comfort and balanced load distribution. Includes 17 pockets/tool holders plus behind–holder glove pockets and a hanging D–ring. Made in USA.
Includes
- (1) Occidental Leather 2500 Stronghold SuspendaVest
Key Features
- Quick–disconnect 3" leather belting accepts tool bags with tunnel loops up to 8.5" wide
- Wide padded shoulder support lined with Dri–Lex to wick perspiration
- Fully adjustable straps with quick–release chest buckle
- Even load distribution to lessen fatigue and help prevent lower back strain
- 17 pockets/tool holders keep common tools close at hand
- Extra pockets behind tool holders for hands or gloves
- Heavy–duty D–ring for hanging storage
- Made in USA; left–handed option available
Applications
- Framing without a traditional belt
- Electrical work needing balanced tool carry
- Concrete tasks with frequent tool access
- Trim and finish work in tight spaces
Installation Overview
- Adjust shoulder straps and chest buckle for comfort.
- Attach compatible tool bags to the 3" leather belting via tunnel loops (up to 8.5").
- Organize tools among the 17 holders; secure heavier items to designated loops.
- Use the D–ring for hanging storage when not in use.
- Detach bags as needed for finish or tight–space tasks.
Specifications
| Pockets & Tool Holders | 17 |
| Weight | 3.0 lbs |
| Size | One size fits most |
| Material | 3" wide leather belting with padded fabric vest |
| Tool Bag Compatibility | Tunnel loops up to 8.5" wide |
| Closure | Quick–release chest strap buckle |
NOTE: Because of the extra–wide hangers, this vest will not accommodate models 5525 or B5611 tool bags.
Occidental Leather 2500 Stronghold SuspendaVest
Stronghold SuspendaVest belt-free tool vest, 17 pockets
✓ Maximum Comfort wide padded shoulder support lined with Dri-Lex
✓ Freedom of Movement fully adjustable straps for a custom fit
✓ Even Load Distribution helps reduce fatigue & lower-back strain
✓ 17 pockets & tool holders keep commonly used tools organized
✓ Made in USA
$214.90
Unit price per29 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
- Quick–disconnect 3" leather belting — accepts tunnel–loop tool bags up to 8.5" wide
- Dri–Lex padded shoulders — moisture wicking comfort
- Fully adjustable fit with quick–release chest buckle
- Even load distribution to reduce fatigue and lower–back strain
- Storage: 17 pockets/tool holders plus behind–holder glove pockets
- Heavy–duty D–ring for hanging storage
- Made in USA
- Pockets & Tool Holders: 17
- Weight: 3.0 lbs
- Size: One size fits most
- Material: 3" wide leather belting with padded fabric vest
- Tool Bag Compatibility: Tunnel loops up to 8.5" wide
- Closure: Quick–release chest strap buckle
More About Occidental Leather 2500 Stronghold SuspendaVest
Occidental Leather 2500 Stronghold SuspendaVest Description
Build a belt—free carry system with the Stronghold SuspendaVest. The quick–disconnect 3" leather belting accepts compatible tunnel–loop tool bags, while wide Dri–Lex® padded shoulders and adjustable straps provide comfort and balanced load distribution. Includes 17 pockets/tool holders plus behind–holder glove pockets and a hanging D–ring. Made in USA.
Includes
- (1) Occidental Leather 2500 Stronghold SuspendaVest
Key Features
- Quick–disconnect 3" leather belting accepts tool bags with tunnel loops up to 8.5" wide
- Wide padded shoulder support lined with Dri–Lex to wick perspiration
- Fully adjustable straps with quick–release chest buckle
- Even load distribution to lessen fatigue and help prevent lower back strain
- 17 pockets/tool holders keep common tools close at hand
- Extra pockets behind tool holders for hands or gloves
- Heavy–duty D–ring for hanging storage
- Made in USA; left–handed option available
Applications
- Framing without a traditional belt
- Electrical work needing balanced tool carry
- Concrete tasks with frequent tool access
- Trim and finish work in tight spaces
Installation Overview
- Adjust shoulder straps and chest buckle for comfort.
- Attach compatible tool bags to the 3" leather belting via tunnel loops (up to 8.5").
- Organize tools among the 17 holders; secure heavier items to designated loops.
- Use the D–ring for hanging storage when not in use.
- Detach bags as needed for finish or tight–space tasks.
Specifications
| Pockets & Tool Holders | 17 |
| Weight | 3.0 lbs |
| Size | One size fits most |
| Material | 3" wide leather belting with padded fabric vest |
| Tool Bag Compatibility | Tunnel loops up to 8.5" wide |
| Closure | Quick–release chest strap buckle |
NOTE: Because of the extra–wide hangers, this vest will not accommodate models 5525 or B5611 tool bags.
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
