Occidental Leather
Occidental Leather FatLip Nylon Tool Bag 8582
$134.90
Unit price perOccidental Leather 8582 FatLip Nylon Tool Bag
A 10" deep hybrid nylon/leather tool pouch featuring a full leather boot and the signature leather FatLip mouth that holds its shape for easy access and abrasion resistance. Purpose-built for right-side carry with organized storage for daily-use tools.
Includes
- (1) FatLip Nylon Tool Bag (8582)
Key Features
- 10" deep main pouch for high capacity
- FatLip leather-reinforced mouth stays open and resists wear
- Full leather boot adds structure and durability
- 13 pockets & tool holders for organized access
- Right-hand layout; worn on the right side
- Made in the USA
Applications
- Daily carry of hand tools such as hammer, knife, pencils, and chisels
- Carpentry/framing setups on the dominant-hand side
- General construction and remodeling tool organization
Specifications
| Pockets & Tool Holders | 13 |
| Main Tool Bag | 10" W x 10" H |
| Outer Bag | 6.5" W x 5.5" H |
| Depth | 10" |
| Material | Nylon body with full leather boot and leather-reinforced FatLip mouth |
| Weight | 1.9 lb (approx.) |
| Orientation | Right-hand |
| Country of Manufacture | USA |
NOTE: This 8582 model is configured for right-hand use and does not have a left-hand variant.
Occidental Leather FatLip Nylon Tool Bag 8582
FatLip nylon tool bag, right-hand, 10" deep
✓ FatLip™ leather mouth stays open & holds shape
✓ Full leather boot reinforced bottom for long-term durability
✓ 10″ deep main bag for increased capacity
✓ 13 pockets & tool holders for organized storage
✓ Right-hand layout worn on the right side
$134.90
Unit price per10 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Nylon Gear Care
- Brush off grit daily and wipe with a damp cloth; allow to air dry.
- Shake out interior debris periodically.
- Avoid prolonged sun exposure and harsh chemical cleaners.
- For stubborn grime, clean with mild soap and water.
- Store in a cool, dry place when not in use.
Minor Abrasion/Tear Tips
- Use nylon repair tape or a fabric patch on small areas, after cleaning and drying.
- Stitch over patches with heavy-duty thread for added strength if needed.
- FatLip leather mouth — reinforced opening stays open and resists abrasion
- Full leather boot for rugged durability
- 13 pockets & holders for efficient organization
- Main bag: 10" W x 10" H
- Outer bag: 6.5" W x 5.5" H
- Depth: 10"
- Material: Nylon body with leather reinforcements
- Weight: 1.9 lb (approx.)
- Orientation: Right-hand
- Made in the USA
More About Occidental Leather FatLip Nylon Tool Bag 8582
Occidental Leather 8582 FatLip Nylon Tool Bag
A 10" deep hybrid nylon/leather tool pouch featuring a full leather boot and the signature leather FatLip mouth that holds its shape for easy access and abrasion resistance. Purpose-built for right-side carry with organized storage for daily-use tools.
Includes
- (1) FatLip Nylon Tool Bag (8582)
Key Features
- 10" deep main pouch for high capacity
- FatLip leather-reinforced mouth stays open and resists wear
- Full leather boot adds structure and durability
- 13 pockets & tool holders for organized access
- Right-hand layout; worn on the right side
- Made in the USA
Applications
- Daily carry of hand tools such as hammer, knife, pencils, and chisels
- Carpentry/framing setups on the dominant-hand side
- General construction and remodeling tool organization
Specifications
| Pockets & Tool Holders | 13 |
| Main Tool Bag | 10" W x 10" H |
| Outer Bag | 6.5" W x 5.5" H |
| Depth | 10" |
| Material | Nylon body with full leather boot and leather-reinforced FatLip mouth |
| Weight | 1.9 lb (approx.) |
| Orientation | Right-hand |
| Country of Manufacture | USA |
NOTE: This 8582 model is configured for right-hand use and does not have a left-hand variant.
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
