Holiday Gift Guide 2021

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 5055P Key Features

• Replacement shoulder pad for Stronghold Suspension System
• Ambidextrous design fits left or right shoulder
• Industrial nylon construction for long service life
• Made in USA

Occidental Leather 5055P Applications

• Replace worn or damaged pad on the 5055 Stronghold system
• Improve comfort during extended tool belt use
• Configure suspension setup for left or right shoulder wear

Occidental Leather 5055P Installation Overview

1. Remove the existing shoulder pad from the 5055 system.
2. Position the replacement pad on the desired shoulder side.
3. Attach using the system hardware per manufacturer guidance.
4. Adjust straps for a secure and comfortable fit.
5. Verify movement and load distribution before use.

Occidental Leather 8003 SM Key Features

• 3 in. padded industrial nylon belt body for comfort and support
• 2 in. heavy leather tongue with nickel plated steel roller buckle
• Lightweight design reduces fatigue during long wear
• Works with most tool bags and suspenders
• Made in USA

Occidental Leather 8003 SM Applications

• Foundation belt for building custom tool rig setups
• Daily jobsite tool carry for tradespeople
• Use with suspenders for added load distribution
• Compatible base for professional tool and fastener bags

Occidental Leather 8003 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine belt size.
2. Select size Small if your midpoint measurement is 34 in. (approx. pant waist 29 in. to 32 in.).
3. Thread the leather tongue through the roller buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags to the belt body as needed.
5. Optional: connect suspenders to distribute weight.

Occidental Leather 5002 M Features

• Premium 12-14 oz bridle leather, custom tanned in the USA
• Edge stitched for durability and clean look
• Heavy duty 2 in steel roller buckle with nickel finish
• Slim 2 in width for compact tool bag setups
• Made in the USA

Occidental Leather 5002 M Applications

• Base belt for tool rigs and pouch systems
• Replacement belt for Occidental Leather setups
• Low profile carry for compact tool bags
• General jobsite wear requiring a durable work belt

Occidental Leather 5002 M Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the most used hole.
2. Select the size closest to that midpoint measurement.
3. If no belt to measure, add 4 in to pant waist for approximate midpoint.
4. Thread the buckle and secure at the midpoint hole; adjust as needed.

Occidental Leather 5592 Features

• Go beltless with the 5055 Stronghold Suspension System
• Works with bags designed for a 3 inch belt
• Wide hangers provide stable bag support
• Made in USA

Occidental Leather 5592 Applications

• Convert a traditional belt rig to a beltless setup
• Customize tool bag layout for carpentry and construction
• Reduce waist bulk while maintaining bag capacity
• Integrate existing bags with a suspension system

Occidental Leather 5592 Installation Overview

1. Attach the Retro Tabs to the 5055 Stronghold Suspension System per manufacturer guidance.
2. Hang traditional bags that accept a 3 inch belt onto the tabs.
3. Adjust suspension straps for balanced load and comfort.
4. Verify all connections are secure before use.

Occidental Leather 9008 Key Features

• High density cushion technology for hip comfort
• Light weight pads retrofit quickly to existing belt sets
• Accepts any bag up to 7.5 in wide
• Does not accommodate the 5525 Big Oxy Fastener Bag or B5611 Green Building Fastener Bag
• Made in the USA

Occidental Leather 9008 Applications

• Increase hip comfort on heavy tool belt setups
• Retrofit comfort upgrade for existing Occidental or other belt worn systems
• Use with compatible tool bags up to 7.5 in wide

Occidental Leather 9008 Installation Overview

1. Remove tool bags from your belt.
2. Slide a Hip Buddy onto each side of the belt at the hip locations.
3. Reinstall tool bags ensuring each is 7.5 in wide or less.
4. Adjust position for comfort and secure all attachments.

Occidental Leather 5066LH Key Features

• Left-handed configuration; wears on right side
• All leather construction for long-term durability
• Angled body for better balance and comfort
• Two holders for drill or driver bits
• Fits most cordless drills; accepts belts up to 3 in.
• Made in the USA

Occidental Leather 5066LH Applications

• Hands-free carry of cordless drills on the jobsite
• Quick access to drill and driver bits
• Left-handed setup for carpentry, framing, and finish work

Occidental Leather 5066LH Installation Overview

1. Slide holster onto a work belt up to 3 in. wide.
2. Secure the retention strap as needed.
3. Insert cordless drill into the angled pocket.
4. Store driver bits in the integrated bit holders.

Occidental Leather 5066 Features

• Premium full grain leather construction for long term durability
• Angled ergonomic design for improved balance and access
• Two built in holders for drill or driver bits
• Fits most cordless drills
• Available in right or left handed versions; left handed model 5066LH
• Made in the USA

Occidental Leather 5066 Applications

• Hands free carry of cordless drills on the jobsite
• Quick access drilling for framing and carpentry
• Tool organization for electricians and installers
• General construction and remodeling tasks

Occidental Leather 5066 Installation Overview

1. Slide holster onto your work belt at the preferred position.
2. Adjust placement for comfortable angled access.
3. Secure the retention strap snap if desired.
4. Insert drill fully; place bits in the dedicated holders.
5. Test movement to ensure secure, unobstructed access.

Occidental Leather 8567 Key Features

• Right-hand layout
• Fits a 3 in belt
• Hybrid construction: industrial nylon body with leather reinforcement
• 4 pockets and holders for drill, bits, and small tools
• Compatible with select Bosch, Hitachi, Makita, and Milwaukee compact drills and drivers
• Made in USA

Occidental Leather 8567 Applications

• Hands-free carry of cordless drills and impact drivers
• Bit and small fastener organization on the belt
• Framing, punch-out, and general construction tasks

Occidental Leather 8567 Installation Overview

1. Slide the holster onto a work belt up to 3 inches wide.
2. Secure the leather strap/snaps as designed.
3. Place the drill or driver in the main pocket.
4. Store bits and small tools in the exterior sleeves.

Occidental Leather 5545 Key Features

• Accepts nail strips up to 16D size
• Heavy belting leather construction
• Holds up to 8 racks
• Fits belts up to 3 inches wide
• Made in the USA

Occidental Leather 5545 Applications

• Keep nail strips at hand for faster nail gun reloads
• Organize collated nails while framing, roofing, or decking
• Reduce trips to refill fasteners on the jobsite

Occidental Leather 5545 Installation Overview

1. Thread the holster onto your work belt (up to 3 inch width).
2. Load collated nail strips into the pouch.
3. Position for preferred hand access and begin work.

Occidental Leather 5053 Key Features

• Five pockets and tool holders in a compact layout
• Dedicated test meter pocket fits most compact testers
• Snap loop carry hangs over belts up to 2 inches wide or carry standalone
• All-leather, professional grade construction
• Made in USA

Occidental Leather 5053 Applications

• Estimating and inspections
• Troubleshooting and service calls
• Trim-out and finish electrical tasks

Occidental Leather 5053 Installation Overview

1. Open snap loop and place over a belt up to 2 inches wide or carry by hand.
2. Seat the caddy against the belt and close the snap securely.
3. Load tools into the five pockets, placing the test meter in the larger pocket.
4. Verify all tools are seated and the snap is fully engaged before use.

Occidental Leather 5019 Features

• All-leather construction for durability
• Clean interior with no tool holders or dividers
• Compact size suited for fasteners and small tools
• Made in USA
• Riveted and stitched for strength

Occidental Leather 5019 Applications

• Carry loose fasteners on the job
• Store small hand tools or accessories
• Add-on third bag for tool belt systems
• General utility storage for carpentry or trade work

Occidental Leather 5019 Installation Overview

1. Slide pouch onto compatible work belt or mount per your rig setup.
2. Position for comfortable reach and balance.
3. Load with fasteners or small tools; avoid overfilling.
4. Check stitching and rivets periodically for wear.

Occidental Leather 1355 Key Features

• Five color coded pouches for quick sorting
• Durable industrial nylon construction
• Zip top closure with leather pull
• Compact 12 x 7 in size for small tools and parts
• Made in USA

Occidental Leather 1355 Applications

• Organizing small tools and accessories
• Separating fasteners, anchors, and hardware
• Storing bits, blades, and connectors
• Jobsite grab and go parts management

Occidental Leather 1355 Installation Overview

1. Load items into each pouch by category or color code.
2. Zip closed and attach together via ring or store in tool bag.
3. Grab the needed pouch on the job and return to storage after use.

Occidental Leather 5008SM Key Features

• Bridle leather, custom tanned in the USA
• Edge stitched for strength and clean look
• Heavy duty steel roller buckle with nickel finish
• 1.5 in. width for everyday wear
• Made in the USA

Occidental Leather 5008SM Applications

• Everyday pant support for workwear
• Jobsite use where a durable leather belt is preferred
• Holds small clip-on accessories compatible with pant belts

Occidental Leather 5008SM Installation Overview

1. Measure current belt from buckle end to most-used hole.
2. Select the size closest to that mid-range measurement.
3. If no belt to measure, add 4 in. to pant waist for an estimate.
4. Thread belt through pant loops and fasten with buckle.

Occidental Leather 9504 Key Features

• Cost efficient organization for small tools and fasteners
• Seven-pocket, multi-pouch design with holders for pencil, utility knife, and angle square
• Heavy-duty clip attaches quickly to belts or waistbands
• Fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9504 Applications

• Small repairs and punch list tasks
• Trim and finish work
• General maintenance rounds
• Weekend DIY projects

Occidental Leather 9504 Installation Overview

1. Load tools and fasteners into main and outer pockets.
2. Clip the pouch to your belt or waistband.
3. Ensure clip is fully engaged; adjust placement for comfort.

Occidental Leather 9025 Key Features

• Compact 6-in-1 design combines pockets and holders
• Padded nylon fastener bag for added capacity
• Holds tape, hammer, knife or chisel, pencils and fasteners
• Space-saving add-on for tool belts or vests
• Ideal for trim, punch list, and small tasks

Occidental Leather 9025 Applications

• Carry essentials for quick service calls
• Trim and finish work where a light setup is needed
• Punch list tasks and small repairs
• Supplemental pouch for tool belts or vests

Occidental Leather 5520 Key Features

• 5-in-1 functionality — organize hammer, pliers, pencil, crayon or screwdriver, and a sharp tool
• Removable Oxy Tool Shield protects chisels, knives, and other sharp edges
• Full-grain American leather for long service life
• Space-efficient footprint on your belt
• Slides onto work belts up to 3 inches wide
• Made in the USA

Occidental Leather 5520 Applications

• Framing and general carpentry hand tool carry
• Electrical trim and service work
• Punch list and maintenance tasks
• Everyday belt carry for essential hand tools

Occidental Leather 5520 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position for preferred hand access on your belt system.
3. Load hammer, pliers, pencil, and crayon or screwdriver into the dedicated sleeves.
4. Insert chisels or knives into the removable Oxy Tool Shield.
5. Check fasteners and leather for secure fit before use.

Occidental Leather 5808 SM Features

• 9–10 oz Latigo leather
• Edge-stitched finish
• 1.5 inch width fits standard belt loops
• Solid stainless steel roller buckle
• Sizes SM–XL
• Made in USA

Occidental Leather 5328 Key Features

• Made in the USA
• 10 oz Latigo belting leather construction
• Heavy-duty spring steel belt clip
• Italian-style drop clasp
• Clips to belts up to 2 inches wide
• Sized for larger smartphones (iPhone Plus and similar)

Occidental Leather 5328 Applications

• Keep smartphones secure and accessible on the jobsite
• Belt-mounted carry for larger phones
• Protection from bumps, dust, and debris
• Everyday use for trades and field work

Occidental Leather 5328 Installation Overview

1. Attach the holster by clipping it to a belt up to 2 inches wide.
2. Place the phone inside the holster.
3. Close the drop clasp to secure the phone.
4. Check that the clip is fully engaged before use.

Occidental Leather B5114K Features

• Low-profile carry keeps tool snug and secure
• DIY installation with copper rivets and guidance
• Premium, handcrafted leather construction
• Made in USA

Occidental Leather B5114K Applications

• Framing work requiring fast cat's paw access
• Roofing tasks where low-swing storage is preferred
• General carpentry and trim installation
• Outfitting tool belts, vests, and rigs with a dedicated sleeve

Occidental Leather B5114K Installation Overview

1. Gather tools: smooth face hammer, cutters, 9/32 socket, pick, drill with 3/16 bit, and hard surface.
2. Drill out two outer rivets from the non-dominant side bag.
3. Insert the new rivet through the hanger and through the sleeve hole.
4. Seat washer using a hammer and socket or small pipe.
5. Trim rivet to leave about 1/8 to 3/16 length.
6. Peen rivet on a hard surface with a smooth face hammer to finish.

Occidental Leather 5114K Key Features

• Low profile sleeve keeps tool snug to the body
• DIY install kit with copper rivets and instructions
• Premium leather construction, handcrafted
• Made in the USA

Occidental Leather 5114K Applications

• Framing and structural carpentry carry
• Roofing tasks requiring secure pry bar access
• Finish carpentry and trim work
• Mounting to tool pouches, vests, or belt rigs

Occidental Leather 5114K Installation Overview

1. Gather tools: smooth face hammer, side cutters, 9/32 deep socket, pick, drill with 3/16 bit, and a hard surface.
2. Drill out and remove the two outer rivets on the nondominant side bag.
3. Position sleeve; push a new rivet through the hanger and sleeve holes.
4. Seat washer using a hammer and socket or small pipe.
5. Trim excess rivet length to about 1/8 - 3/16 in.
6. Peen the rivet on a hard surface until tight; repeat for remaining rivet.

Occidental Leather 5523 Key Features

• 4-in-1 capacity for tape, pencil, crayon or screwdriver, plus sharp tool
• Includes Oxy Tool Shield for chisel, knife, or cutter protection
• Extra heavy duty steel clip fits belts up to 2 in wide
• Sturdy American leather construction for long service life
• Compact clip-on design saves belt space
• Made in USA

Occidental Leather 5523 Applications

• Everyday carry of tape measure and small hand tools
• Safe transport of chisels or knives with the included shield
• Carpentry and trim layout tasks
• General construction and remodeling

Occidental Leather 5523 Installation Overview

1. Slide the steel clip onto a belt up to 2 in wide.
2. Place tape measure in the main pocket.
3. Insert pencil and crayon or screwdriver into their sleeves.
4. Seat sharp tools inside the Oxy Tool Shield.
5. Adjust position on belt for comfort and access.

Occidental Leather 5522 Key Features

• 4-in-1 functionality for tape, pencil, crayon or screwdriver, plus sharp tools
• Full-grain American leather for long service life
• Free Oxy Tool Shield included for chisels, knives, cutters
• Belt-ready tunnel loop fits up to 3 in. belts
• Made in USA

Occidental Leather 5522 Applications

• On-belt organization for measuring and marking tools
• Carpentry and framing jobs requiring quick access to tape and pencil
• General construction and DIY tool carry
• Safe storage of sharp tools using the included shield

Occidental Leather 5522 Installation Overview

1. Slide the holder onto a belt up to 3 in. wide.
2. Seat the Oxy Tool Shield in the lower pocket.
3. Place tape measure in the main pocket.
4. Insert pencil and crayon or screwdriver in side sleeves.
5. Load sharp tools into the shield and verify secure fit.

Occidental Leather 8578 Features

• Clip-on mount with spring steel attachment for suspenders
• Padded phone sleeve with velcro flap
• Holders for pencils, notepad, and driver bits
• Seven total pockets and holders
• Easy to install and remove as needed
• Made in USA

Occidental Leather 8578 Applications

• Chest-mounted carry for daily jobsite essentials
• Secure phone storage while climbing or moving
• Quick access to pencils, notepad, and driver bits
• Organization add-on for Stronghold suspenders

Occidental Leather 8578 Installation Overview

1. Position the pocket on the chest strap of Stronghold suspenders.
2. Clip the spring steel attachment over the strap until secure.
3. Place phone in padded sleeve and close velcro flap.
4. Load pencils, notepad, and bits into the designated holders.
5. Check fit and accessibility before use.