Holiday Gift Guide 2021

Occidental Leather 9020B Features

• Extra heavy 2 in wide nylon straps
• Front and rear adjustment; non-stretch for secure support
• Heavy harness leather rear spreader for durability
• Quality super heavy clamps attach to belt or waistband
• Black color

Occidental Leather 9020B Applications

• Support and stabilize tool belts during daily work
• Hold up pants securely on the jobsite
• Distribute load weight to reduce hip and lower back strain
• Clip to work belts or waistband using heavy-duty clamps

Occidental Leather 9020B Installation Overview

1. Attach each clamp to your waistband or tool belt evenly spaced.
2. Place straps over shoulders with the leather spreader centered on your back.
3. Adjust front and rear sliders for a comfortable, balanced fit.
4. Confirm clamps are secure and straps are not twisted before use.

Occidental Leather 8552 Key Features

• 2 inch belt clip for fast on off attachment
• Drawstring closure keeps contents secure yet accessible
• Dual layer 1000D nylon sides and 1050D nylon bottom for wear resistance
• Medium size: 6 in diameter x 7 in high
• Made in the USA

Occidental Leather 8552 Applications

• Carry fasteners, anchors, and small hardware
• Quick access storage for bits and small hand tools
• Add on pouch for tool belts and vests
• Jobsite organization for installers and carpenters

Occidental Leather 8552 Installation Overview

1. Slide the 2 inch clip over your belt, pocket, or strap.
2. Load hardware or tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Release the clip to reposition or remove as needed.

Occidental Leather B8552 Features

• 2 in. steel belt clip for quick on/off attachment
• Drawstring closure to secure small parts and fasteners
• Dual-layer nylon build: 1000D sides, 1050D bottom for wear resistance
• Clips to most belts or waistbands up to 2 in. wide
• Made in the USA

Occidental Leather B8552 Applications

• Carrying nails, screws, and small fasteners
• Storing bits, anchors, and small hand tools
• Clip-on parts pouch for framing, trim, and service work
• Supplemental storage on belts, waistbands, or vests

Occidental Leather B8552 Installation Overview

1. Attach the steel clip to a belt or waistband up to 2 in. wide.
2. Load fasteners or small tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Position for comfortable reach and confirm the clip is fully seated.

Occidental Leather B5057 Features

• Compact 4 pocket organizer protects you, your tools, and your clothes
• Creates an instant mini tool carrier for pliers, screwdrivers, and more
• Snap loop attaches to belts up to 2 inches wide
• Durable leather construction for daily use
• Made in USA

Occidental Leather B5057 Applications

• Small repair jobs
• Shop and maintenance work
• Gardening and yard upkeep
• Cabinetmaking and finish tasks
• Farm and field repairs

Occidental Leather B5057 Installation Overview

1. Load tools into the four pockets to suit your task.
2. Place the caddy in your pant pocket or position at the belt line.
3. Wrap the snap loop around a belt up to 2 inches wide, if preferred, and close the snap.
4. Adjust tool placement for balance and quick access.
5. After use, remove debris and store dry.

Occidental Leather 5057 Features

• 4 pocket layout keeps small tools separated and easy to grab
• Premium leather construction with reinforced stitching
• In pocket carry or snap loop for belt use
• Fits most belts up to 2.5 inches wide
• Lightweight, compact design for everyday tasks
• Made in USA

Occidental Leather 5057 Applications

• Small repairs and service calls
• Electrical and shop maintenance
• Gardening and farm upkeep
• Cabinet and finish work

Occidental Leather 5057 Installation Overview

1. Load tools into the four pockets as needed.
2. Place the caddy in a front or rear pocket, or
3. Attach via the snap loop to a belt up to 2.5 inches wide.
4. Adjust position for comfortable access and secure carry.

Occidental Leather 5527 Features

• Holds offset metal snips like Wiss M6 and M7; also fits pruning shears
• Full grain American leather construction
• Accepts belts up to 3 in. wide for stable carry
• Designed with steel framers in mind; great for pros and DIYers
• Made in the USA

Occidental Leather 5527 Applications

• Steel framing and sheet metal work
• General contracting and remodeling
• Landscaping and pruning tasks
• Tool belt organization for offset snips

Occidental Leather 5527 Installation Overview

1. Slide holster onto a belt up to 3 in. wide.
2. Optional: pair with the 2003 Oxy Tool Shield.
3. Insert offset snips or pruning shears fully into the pocket.
4. Confirm a secure fit before use.

Occidental Leather 5047 Key Features

• Combo layout holds utility knife, two pencils, and a tape measure
• Accepts 35 ft tape or 25 ft FatMax; works as a chalk line holster
• Streamlined, lightweight design for finish work and tight spaces
• Rugged leather construction; riveted for durability
• Fits belts up to 3 inches wide; made in USA

Occidental Leather 5047 Applications

• Finish carpentry and punch list tasks
• Carrying tape, knife, and pencils for quick measurements and marking
• Chalk line holstering for layout work
• Streamlining tool access on compact belt setups

Occidental Leather 5047 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Seat the tape measure in the front pocket; remove the tape clip if needed for proper fit.
3. Allow leather to break in for snug, secure seating.
4. Insert utility knife and two pencils into their sleeves.
5. Verify comfortable placement and retention before use.

Occidental Leather 9512 Features

• Tool-specific storage for tape, pad, pens, pencils, screwdriver, utility knife, and pliers
• Accepts work belts up to 2 inches wide
• Industrial 2-ply Cordura fabric with foam core for structure
• Made in the USA

Occidental Leather 9512 Applications

• Punch list jobs and service calls
• Inspections and light-duty tasks
• Field technician essentials carry
• Belt-mounted tool organization

Occidental Leather 9512 Installation Overview

1. Slide the pouch onto a work belt up to 2 inches wide.
2. Position the pouch for comfortable access.
3. Load tools into the dedicated holders.
4. Ensure items are seated securely before use.

Occidental Leather 1019 Key Features

• Bridle leather construction for durability and classic look
• Adjustable shoulder pad for added comfort
• High quality swivel steel clips for easy on and off
• 1" wide strap adjusts 45" to 57.5" to fit most users
• Made in USA

Occidental Leather 1019 Applications

• Add a shoulder carry option to Journeyman's Tote and IronMouth bags
• Upgrade or replace straps on tool bags and carry totes
• Comfortable carry for travel and everyday gear

Occidental Leather 1019 Installation Overview

1. Attach each swivel clip to the bag's D-rings or hardware loops.
2. Position the shoulder pad at the desired resting point.
3. Adjust strap length between 45" and 57.5" for fit.
4. Check clips for secure closure before use.

Occidental Leather 5020 Key Features

• Two tools, one footprint for belt space efficiency
• Slides easily onto standard tool belts
• 12 oz English bridle leather construction for durability
• Purpose built for pros and DIY users
• Made in USA

Occidental Leather 5020 Applications

• Carry a hammer and pliers or similar hand tool at the ready
• Carpentry and framing work on site
• General construction and remodel tasks
• Workshop and home project tool carry

Occidental Leather 5020 Installation Overview

1. Thread the holder loop onto your work belt.
2. Position at the preferred hip location.
3. Insert hammer into the metal loop.
4. Place a hand tool into the leather pocket.
5. Check clearance and adjust belt position for comfort.

Occidental Leather B9019 Key Features

• Compact single-compartment pouch for fast access
• Padded, double wall industrial nylon for structure and durability
• Lightweight design suited for small jobs or as a third bag
• Slides onto work belts; compatible up to 3 in. belts
• Made in the USA

Occidental Leather B9019 Applications

• Carry fasteners, parts, or small hand tools
• Add-on storage for tool belt systems
• Service calls and light-duty tasks
• Organizing essentials for trim or punch list work

Occidental Leather B9019 Installation Overview

1. Thread the bag onto your work belt (fits up to 3 in.).
2. Position at preferred location for access.
3. Load with small tools, fasteners, or parts.
4. Check balance and adjust as needed on the belt.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather G9019 Key Features

• Compact single-compartment layout for quick access
• Padded, double-wall nylon adds structure and durability
• Lightweight design for comfortable all-day wear
• Great as a third bag or for small jobs
• Made in the USA

Occidental Leather G9019 Applications

• Extra storage on a tool belt for fasteners or small parts
• Light-duty service and punch-list tasks
• Add-on third bag for flexible belt setups
• General utility carrying on the jobsite

Occidental Leather G9019 Installation Overview

1. Slide the bag onto your work belt through the rear loop.
2. Position at the preferred location for access and balance.
3. Load with small tools or fasteners and confirm a secure fit.

Occidental Leather B5068 Features

• All-leather construction for long-term durability
• Snap closure secures calculator and allows quick access
• Fits up to a 3 inch work belt
• Compatible with Construction Master models I, II, III, IV and other brands
• Also available as clip-on model B6568

Occidental Leather B5068 Applications

• Jobsite calculator protection and portability
• Belt-mounted storage for quick measurement access
• Secure carry while walking, climbing, or working

Occidental Leather B5068 Installation Overview

1. Slide the case onto a belt up to 3 inches wide.
2. Insert the calculator into the pouch.
3. Close the snap to secure and check fit.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 8551 Features

• 2 inch steel clip enables fast on and off attachment
• Drawstring closure secures fasteners and small tools
• Dual layer 1000D sides and 1050D bottom for wear resistance
• Clips to most belts or waistbands up to 2 inches wide
• Made in the USA

Occidental Leather 8551 Applications

• Carry nails, screws, and small parts on the job
• Quick access storage for trim shims and wedges
• Add on pouch for tool belts and work vests
• Lightweight parts holder for service and install work

Occidental Leather 8551 Installation Overview

1. Slide or clip the pouch onto a belt or waistband up to 2 inches wide.
2. Load with fasteners or small tools.
3. Pull the drawstring to secure contents as needed.
4. Release the clip to remove when finished.

Occidental Leather B8551 Features

• 2-inch belt clip for quick attachment and removal
• Drawstring top keeps fasteners and small tools secure
• Dual-layer 1000D nylon sides with 1050D nylon bottom
• Small size: 5 in diameter x 6 in high; color: black
• Proudly made in the USA

Occidental Leather B8551 Applications

• Carry nails, screws, and small fasteners
• Store small hand tools and accessories
• Quick-grab pouch for trim and finish tasks
• Add-on storage for tool belts and work vests

Occidental Leather B8551 Installation Overview

1. Slide or clip the pouch onto a work belt using the 2-inch belt clip.
2. Load fasteners or small tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Adjust pouch position for comfortable reach.

Occidental Leather 5237 Key Features

• High-mount, clip-on design installs without removing your belt
• Sized to fit 35 ft FatMax tape measures
• Proprietary steel belt clip fits belts up to 2 inches wide
• Heirloom-quality leather for long-lasting durability
• Made in USA

Occidental Leather 5237 Applications

• Secure belt carry for 35 ft tape measures on the jobsite
• Fast access measuring for framing, trim, and general carpentry
• Upgrade or replacement holster for tool belts and work pants

Occidental Leather 5237 Installation Overview

1. Slide or clip the steel clip over your belt (up to 2 inches wide).
2. Position the holster high on the belt for reduced swing.
3. Insert the tape measure into the pouch opening until fully seated.
4. Check retention and adjust holster position for comfort.
5. Remove by lifting the clip tab and sliding off the belt.

Occidental Leather 5137 Key Features

• High mount belt design for better mobility
• Extra Large fit for 35 ft FatMax style tape measures
• Premium durable leather construction
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5137 Applications

• Daily tape measure carry on tool belts
• Framing and layout tasks
• General carpentry and jobsite measuring

Occidental Leather 5137 Installation Overview

1. Slide holster onto a belt up to 3 in wide and position at desired height.
2. Insert tape measure into the holster with the base aligned to the cutout.
3. Confirm secure fit and accessibility before use.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather 9005 Features

• Provides extra lower back support on tool belts
• Slides under a third bag or hammer holder
• High density foam pad with polyethylene stiffener
• Durable industrial nylon cover
• Made in USA

Occidental Leather 9005 Applications

• Add support and comfort to existing work belts
• Use beneath a third bag or hammer loop without interference
• Stabilize belt load during heavy tool carry
• Retrofit for most professional tool belt systems

Occidental Leather 9005 Installation Overview

1. Slide the Belt Buddy onto your work belt at the rear center.
2. Position so it sits comfortably at the lower back.
3. Attach a third bag or hammer holder over the pad if desired.
4. Tighten belt and adjust for support and fit.

Occidental Leather 5046 Features

• Clip-on design installs without removing your belt
• High-mount position reduces swing and improves mobility
• Proprietary steel belt clip fits up to 2 in belts
• Heirloom quality leather construction
• Made in USA

Occidental Leather 5046 Applications

• Secure belt carry for tape measures
• Framing and carpentry layout work
• General construction and remodeling tasks
• Tool belt organization for pros and DIY

Occidental Leather 5046 Installation Overview

1. Slide the steel clip over your belt at the desired position.
2. Seat the holster high so the tape rests securely.
3. Insert your tape measure into the holster opening.
4. Verify the clip is fully engaged and the tape is accessible.

Occidental Leather 5037 Key Features

• High mount design keeps tape measure secure and accessible
• Top grain leather construction for durability
• Holds up to a 35 ft tape or FatMax
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5037 Applications

• Carrying and securing a tape measure on a work belt
• Framing, carpentry, and general construction tasks
• Remodeling and finish work where fast tape access is needed

Occidental Leather 5037 Installation Overview

1. Thread the holder onto your work belt (up to 3 in wide).
2. Position at preferred height for access.
3. Insert tape measure into pocket with clip facing outward.
4. Verify snug fit and comfortable reach before use.

Occidental Leather 8505 Features

• Clip-on mount attaches to belt or pocket for quick access
• 4 tool pockets sized for knife, pencils, and 35 ft tape
• FatMax compatible tape pocket
• Ultra-lightweight at 0.2 lbs for all-day comfort
• Durable nylon with leather reinforcement; made in USA

Occidental Leather 8505 Applications

• Carry and organize measuring tape, utility knife, and pencils
• Quick tool access on belt or pocket during layout and marking
• Jobsite or shop use where compact organization is needed

Occidental Leather 8505 Installation Overview

1. Clip the holder onto your belt or pocket.
2. Place tape measure, knife, and pencils into designated pockets.
3. Confirm the clip is secure and pockets are seated.
4. Adjust tool placement for comfortable reach.