March Bestsellers

Occidental Leather 5035 SM Key Features

• 3 in wide main belt for support
• 2 in leather tongue with steel roller buckle
• Premium 12-14 oz bridle leather construction
• Edge stitched for long-term durability
• Ideal foundation for tool and fastener bags
• Made in USA

Occidental Leather 5035 SM Applications

• Base belt for professional tool carry systems
• Construction and carpentry tool rigs
• Framing, finish work, and general trades
• Pairing with pouches, holsters, and fastener bags

Occidental Leather 5035 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. Thread tool bags and accessories onto the 2 in tongue/loop.
4. Buckle at the midpoint hole; adjust within the 4 in range each way.
5. Ensure comfortable fit over work clothing before use.

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 5002 M Features

• Premium 12-14 oz bridle leather, custom tanned in the USA
• Edge stitched for durability and clean look
• Heavy duty 2 in steel roller buckle with nickel finish
• Slim 2 in width for compact tool bag setups
• Made in the USA

Occidental Leather 5002 M Applications

• Base belt for tool rigs and pouch systems
• Replacement belt for Occidental Leather setups
• Low profile carry for compact tool bags
• General jobsite wear requiring a durable work belt

Occidental Leather 5002 M Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the most used hole.
2. Select the size closest to that midpoint measurement.
3. If no belt to measure, add 4 in to pant waist for approximate midpoint.
4. Thread the buckle and secure at the midpoint hole; adjust as needed.

Occidental Leather 5509 Features

• Made in USA
• Fits up to a 3 in work belt
• Pre-riveted D ring loops for slip-on attachment
• Compatible with suspenders models 1546, 5009 and 5055

Occidental Leather 5509 Applications

• Add D ring attachment points to non-suspender belts
• Convert work belts to be suspenders-ready
• Replace or expand attachment loops on belts
• Set up multiple belts for quick suspender transfer

Occidental Leather 5509 Installation Overview

1. Slide each loop onto the belt and position evenly.
2. Align D rings at front and rear as preferred.
3. Attach suspender clips to the D rings.
4. Put on belt and adjust suspender length for comfort.

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 2003 Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, diagonal cutter; plus one round pencil
• Lightweight, compact, and jobsite-ready
• Made in the USA

Occidental Leather 2003 Applications

• Safe storage of sharp edge tools on the belt or in bags
• Protecting tool pouches and clothing from blade damage
• Keeping a round pencil handy alongside primary tool
• Organizing chisels, knives, and cutters for quick access

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it to a tool bag edge or pocket.
2. Insert the primary tool into the main compartment.
3. Place a round pencil in the dedicated side slot.
4. Ensure the clip is fully seated and the tool is secure before use.

Key Features

• Purpose built to fasten leather straps to the 5055 Suspender pad
• Simple, field-ready installation using Chicago screws
• Leather washers help protect and secure the strap connection
• Compact, lightweight kit for replacements or spares
• Made in USA

Applications

• Attach leather suspender straps to the 5055 pad
• Replace missing or worn hardware on the 5055 system
• Tighten or refresh existing strap connections

Installation Overview

1. Position strap and pad per the 5055 layout.
2. Align holes and place leather washer at the connection point.
3. Insert Chicago screw post through the pad and strap.
4. Thread and tighten the screw until secure; do not overtighten.
5. Repeat for the second connection and verify a snug, secure fit.

Occidental Leather 8089 LG Key Features

• Hand specific tool layout for efficient workflow
• Padded two ply bags maintain shape
• Extremely abrasion resistant industrial nylon body
• Leather tool holders and corner reinforcements
• 12 oz belting leather with steel roller buckle
• Pockets and tool holders: 22
• Weight: 4.1 lbs

Occidental Leather 8089 LG Applications

• Framing and general carpentry tool organization
• Jobsite fastener and hand tool carry
• Daily wear belt system for professional builders

Occidental Leather 8089 LG Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. If you do not have a belt, add 4 inches to pant waist to estimate mid range.
4. Adjust the 5035 belt using the roller buckle for a secure fit.

Occidental Leather 5080DB-XL Key Features

• Premium top-grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand-specific layout supports natural workflow
• Copper-riveted reinforcement at stress points
• Built-in tape holster fits tapes up to 30 ft FatMax
• Made in USA

Occidental Leather 5080DB-XL Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Daily professional construction use

Occidental Leather 5080DB-XL Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm XL sizing.
2. Position tool bag on dominant hand side; fastener bag on opposite side.
3. Adjust belt to midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners; use NoSpill holders and tape holster as intended.
5. Re-check fit and balance before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5080LG Key Features

• Premium top grain leather construction
• Hand specific tool holders for working rhythm
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders
• Left handed option available as 5080LH
• Made in USA

Occidental Leather 5080LG Applications

• Framing and general carpentry tool carry
• On site construction and renovation
• Efficient organization of fasteners and hand tools
• Daily use by professional builders

Occidental Leather 5080LG Installation Overview

1. Place belt over typical work clothing where it will be worn.
2. Measure from the buckle to the hole you use most.
3. Select the belt size mid range closest to that measurement.
4. Adjust using the 9 holes and position bags and holders as preferred.

Key Features

• 0.75 in plus thick sheepskin pads for maximum cushioning
• Wool naturally insulates, cools, and wicks moisture
• Straps adjust to fit belts up to 3 in wide
• Premium leather outer for durability
• Made in USA

Applications

• Adds comfort and padding to tool or safety belts
• Reduces pressure points and edge bite during heavy loads
• Suitable for year-round jobsite wear
• Compatible with most 3 in wide work belts

Installation Overview

1. Loosen or remove your existing work belt.
2. Position the liner with sheepskin toward the body.
3. Thread or buckle the adjustable straps around the belt.
4. Tighten evenly; allow 1 to 2 in extra belt length.
5. Check fit and make final adjustments for comfort.

Occidental Leather 8018DB Features

• Popular OxyLights configuration with right-hand layout
• Dedicated holders for common hand tools and tape up to 35 ft
• Main bag corners reinforced for durability
• Leather and industrial nylon construction
• Made in the USA

Occidental Leather 5530 XL Features

• Round bottom full-capacity leather bags for greater storage and wear
• Premium top-grain leather with heritage-quality construction
• Hand-specific NoSpill tool holder system
• 3 in English bridle leather belt with steel roller buckle
• Pockets and tool holders: 28
• Includes Oxy Tool Shield and 2-in-1 tool and hammer holder
• Belt size: XL

Occidental Leather 5530 XL Applications

• Framing and rough carpentry tool carry
• Trim carpentry and finish work organization
• General construction and remodeling
• On-belt storage for measuring, cutting, and fastening tools
• Daily professional jobsite use

Occidental Leather 5530 XL Installation Overview

1. Size the belt to XL fit and fasten the steel roller buckle.
2. Slide tool and fastener bags onto the belt and position as preferred.
3. Attach the 2-in-1 tool and hammer holder and Oxy Tool Shield to the belt or bag loops.
4. Load tools into hand-specific pockets to prevent spills.
5. Adjust belt and bag placement for balance and comfort.

Occidental Leather 8062 Features

• 4 pouch layout with main, middle, outer, and upper bags
• 10 total pockets and tool holders
• Dedicated holders for blade square, angle square, cat's paw, and driver bits
• Streamlined profile for compact, efficient storage
• Designed to be worn on the left side for right handed users; left handed option available
• Made in USA

Occidental Leather 8062 Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry where compact, organized storage is preferred
• Keeping squares, bits, and cat's paw readily accessible on the non dominant side

Occidental Leather 5053 Key Features

• Five pockets and tool holders in a compact layout
• Dedicated test meter pocket fits most compact testers
• Snap loop carry hangs over belts up to 2 inches wide or carry standalone
• All-leather, professional grade construction
• Made in USA

Occidental Leather 5053 Applications

• Estimating and inspections
• Troubleshooting and service calls
• Trim-out and finish electrical tasks

Occidental Leather 5053 Installation Overview

1. Open snap loop and place over a belt up to 2 inches wide or carry by hand.
2. Seat the caddy against the belt and close the snap securely.
3. Load tools into the five pockets, placing the test meter in the larger pocket.
4. Verify all tools are seated and the snap is fully engaged before use.

Occidental Leather 5137 Key Features

• High mount belt design for better mobility
• Extra Large fit for 35 ft FatMax style tape measures
• Premium durable leather construction
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5137 Applications

• Daily tape measure carry on tool belts
• Framing and layout tasks
• General carpentry and jobsite measuring

Occidental Leather 5137 Installation Overview

1. Slide holster onto a belt up to 3 in wide and position at desired height.
2. Insert tape measure into the holster with the base aligned to the cutout.
3. Confirm secure fit and accessibility before use.

Occidental Leather 5009K Features

• Direct belt attachment for suspenders
• Works with Occidental models 5009 and 1546
• Hardware and instructions included for installation
• Designed for retrofitting additional belt sets
• Made in the USA

Occidental Leather 5009K Applications

• Attach suspenders directly to existing tool belts
• Create secure belt loops for suspender connection
• Upgrade or replace attachment hardware on belt systems

Occidental Leather 5009K Installation Overview

1. Identify attachment points on the belt per the guide.
2. Prepare holes at marked locations if required.
3. Position hardware and fasten using included rivets and washers.
4. Install rings and clips, then secure firmly.
5. Check alignment and fit; adjust for comfort.

Occidental Leather 8080DB XXL Key Features

• 21 pockets and tool holders
• Hand specific tool holder layout
• Padded two ply nylon bags maintain structure
• Abrasion resistant industrial nylon
• Leather tool holders and corner reinforcement
• Made in USA

Occidental Leather 8080DB XXL Applications

• Framing tasks and general carpentry
• Organizing and carrying essential jobsite tools and fasteners
• Efficient workflow with hand specific pouch layout

Occidental Leather 8080DB XXL Installation Overview

1. Size the Ranger Work Belt to your belt measurement and secure at a comfortable hole.
2. Attach tool and fastener bags and the hammer holder to the belt.
3. Load tools and fasteners into hand specific pockets for your workflow.
4. Check balance and adjust bag positions for comfort and access.

Occidental Leather 5008SM Key Features

• Bridle leather, custom tanned in the USA
• Edge stitched for strength and clean look
• Heavy duty steel roller buckle with nickel finish
• 1.5 in. width for everyday wear
• Made in the USA

Occidental Leather 5008SM Applications

• Everyday pant support for workwear
• Jobsite use where a durable leather belt is preferred
• Holds small clip-on accessories compatible with pant belts

Occidental Leather 5008SM Installation Overview

1. Measure current belt from buckle end to most-used hole.
2. Select the size closest to that mid-range measurement.
3. If no belt to measure, add 4 in. to pant waist for an estimate.
4. Thread belt through pant loops and fasten with buckle.

Occidental Leather 8087 M Key Features

• 20 pockets and tool holders
• Hand-specific tool organization
• Padded two-ply bags maintain structure
• Abrasion-resistant industrial nylon with leather reinforcement
• Made in USA

Occidental Leather 8087 M Applications

• Metal framing and stud work
• Finish carpentry tasks
• Remodeling and general construction
• Organizing fasteners, layout tools, and clamps
• Holstering impact drivers or screw guns

Occidental Leather 8087 M Installation Overview

1. Measure and select the correct belt size; fasten at midpoint hole.
2. Attach included bags and holders to the 3" Ranger belt.
3. Adjust belt fit for comfort and balance.
4. Load tools and fasteners; place driver in the gun holster.
5. Verify secure attachment points and even weight distribution.