Occidental Leather
Occidental Leather Leather Beltless Retro Tab Set 5592
$64.90
Unit price perOccidental Leather 5592 Description
Convert your 5055 Stronghold Suspension System to a beltless setup with the Occidental Leather 5592 Beltless Retro Tab Set. Designed to work with any traditional bags that accept a 3" belt, it lets you customize your carry without a waist belt.
Occidental Leather 5592 Includes
- (1) 5592 Beltless Retro Tab Set
Occidental Leather 5592 Features
- Enables beltless wear with the 5055 Stronghold Suspension System
- Compatible with bags that accept a 3" belt
- Made in USA
- Not compatible with models B5611 or 5525 due to wide hangers
- Leather construction for durability
Occidental Leather 5592 Applications
- Convert 5055 suspension to a belt-free carry system
- Use traditional 3" belt bags without a waist belt
- Customize tool bag setups for comfort and mobility
Occidental Leather 5592 Installation Overview
- Confirm you have the 5055 Stronghold Suspension System.
- Attach the retro tabs to the suspension per the hanger points.
- Mount compatible bags that accept a 3" belt onto the tabs.
- Adjust fit and balance; check all connections are secure.
Occidental Leather 5592 Specifications
| SKU | 5592 |
| UPC | 759244157208 |
| Material | Leather |
| Compatibility | For 5055 Stronghold Suspension System; works with bags accepting 3" belts |
| Not Compatible | B5611, 5525 |
| Weight | 1.1 lb |
| Country of Origin | USA |
NOTE: Due to the extra-wide hangers, this kit will not work with B5611 or 5525 models.
Occidental Leather Leather Beltless Retro Tab Set 5592
Beltless retro tabs for 5055 system
✓ Beltless conversion for 5055 Stronghold Suspension System
✓ Works with 3" belt bags for custom setups
✓ Leather construction for durability
✓ Made in USA
✓ Not compatible with B5611 & 5525
$64.90
Unit price per7 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Care and Maintenance
- Leather panels: Wipe dirt and dust with a dry or slightly damp soft cloth. For heavier soil, use a mild soap-and-water solution on a cloth, then wipe clean and let air-dry. Periodically apply a neutral leather conditioner sparingly to keep the leather supple. Avoid soaking, harsh chemicals, bleach, or petroleum/silicone-based products.
- Nylon webbing: Hand wash with mild soap and lukewarm water if needed; rinse and air-dry completely. Do not machine wash or tumble dry. Avoid bleach or solvents.
- Hardware (D-rings/rivets): Wipe dry after exposure to moisture. Inspect regularly for wear or damage and discontinue use if compromised.
- Drying: If the set becomes wet, allow it to air-dry naturally away from direct heat or sunlight.
- Storage: Store in a cool, dry place away from prolonged sunlight and extreme temperatures. Keep away from oils, solvents, and sharp edges that could cut the webbing or mar the leather.
- Beltless conversion — adapts the 5055 Stronghold Suspension System for waist-belt-free wear
- 3" bag compatibility — use traditional bags that accept a 3" belt
- Leather build — durable construction
- Made in USA
- Exclusions — not compatible with B5611 or 5525
- SKU: 5592
- UPC: 759244157208
- Material: Leather
- Weight: 1.1 lb
- Compatibility: 5055 Stronghold Suspension System; bags accepting 3" belts
More About Occidental Leather Leather Beltless Retro Tab Set 5592
Occidental Leather 5592 Description
Convert your 5055 Stronghold Suspension System to a beltless setup with the Occidental Leather 5592 Beltless Retro Tab Set. Designed to work with any traditional bags that accept a 3" belt, it lets you customize your carry without a waist belt.
Occidental Leather 5592 Includes
- (1) 5592 Beltless Retro Tab Set
Occidental Leather 5592 Features
- Enables beltless wear with the 5055 Stronghold Suspension System
- Compatible with bags that accept a 3" belt
- Made in USA
- Not compatible with models B5611 or 5525 due to wide hangers
- Leather construction for durability
Occidental Leather 5592 Applications
- Convert 5055 suspension to a belt-free carry system
- Use traditional 3" belt bags without a waist belt
- Customize tool bag setups for comfort and mobility
Occidental Leather 5592 Installation Overview
- Confirm you have the 5055 Stronghold Suspension System.
- Attach the retro tabs to the suspension per the hanger points.
- Mount compatible bags that accept a 3" belt onto the tabs.
- Adjust fit and balance; check all connections are secure.
Occidental Leather 5592 Specifications
| SKU | 5592 |
| UPC | 759244157208 |
| Material | Leather |
| Compatibility | For 5055 Stronghold Suspension System; works with bags accepting 3" belts |
| Not Compatible | B5611, 5525 |
| Weight | 1.1 lb |
| Country of Origin | USA |
NOTE: Due to the extra-wide hangers, this kit will not work with B5611 or 5525 models.
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
