All Products

Occidental Leather B8552 Key Features

• 2" steel clip for quick belt or waistband attachment
• Drawstring closure keeps contents secure
• Dual-layer construction: 1000D nylon sides, 1050D nylon bottom
• Medium size capacity: 6" diameter x 7" high
• Clips to most belts up to 2" wide
• Made in the USA

Occidental Leather B8552 Applications

• Carry and secure fasteners, screws, and nails
• Keep small hand tools within reach on the belt
• Trim and finish work where quick access is essential
• Service and punch list tasks requiring light, mobile storage
• Supplemental pouch for tool belts and work vests

Occidental Leather B8552 Installation Overview

1. Attach the 2" steel clip to a compatible belt or waistband (up to 2" wide).
2. Load fasteners or small tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Position the pouch for easy access and adjust as needed.
5. Release the drawstring and unclip to remove when finished.

Occidental Leather 8551 Features

• 2" steel belt clip for rapid on/off at the waist
• Drawstring closure keeps fasteners and small tools secure
• Dual-layer construction: 1000D nylon sides / 1050D nylon bottom
• Small size: 5" diameter x 6" high
• Made in the USA
• Clips to most belts or waistbands up to 2" wide

Occidental Leather 8551 Applications

• Carry nails, screws, and small fasteners on the job
• Quick-access storage for bits, small hand tools, and hardware
• Trim work and finish tasks needing lightweight organization
• Framing and decking where fastener access is essential
• Service and repair jobs requiring compact tool storage

Occidental Leather 8551 Installation Overview

1. Attach the 2" steel clip to your belt or waistband.
2. Load fasteners or small tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Position for comfortable access during work.
5. Release the clip for quick removal when finished.

Occidental Leather 5114K Features

• Low-profile carry keeps cat’s paw tight to body
• Premium, handcrafted leather construction
• DIY install with copper rivets and step-by-step guide
• Made in USA

Occidental Leather 5114K Applications

• Framing: Secure access to pry bar while moving on site
• Roofing: Reduces swing and bulk during high-mobility tasks
• Carpentry: Keeps cat’s paw organized and within reach
• Finish work: Streamlined holder for tight workspaces

Occidental Leather 5114K Installation Overview

1. Gather tools: smooth-face hammer, side cutters, 9/32 deep socket, pick, drill with 3/16 bit, and an anvil or hard surface.
2. Drill out the two outer rivets on the non-dominant side bag to remove flared sections.
3. Align sleeve and push new rivet through hanger and sleeve holes.
4. Seat washer tight using hammer and socket or small pipe.
5. Trim rivet length to about 1/8"–3/16".
6. Peen rivet on a hard surface with a smooth-face hammer to finish.

Key Features

• FatLip™ leather mouth keeps the bag open and protects against wear
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated storage for cat’s paw, tri-square, driver bits, and nail sets
• Left-handed layout — worn on the right side of the body
• Made in the USA

Applications

• Framing — fast access to nails and layout tools
• Drywall installation — organized storage for bits and fasteners
• General construction — durable pouch for daily jobsite tasks

Installation Overview

1. Wear on the right side for left-handed users.
2. Pair with your primary tool bag on the left side.
3. Load fasteners and frequently used layout tools into dedicated pockets.
4. Confirm comfortable position on your work belt before use.

Key Features

• 5" wide belt for enhanced lumbar support
• Padded wool liner for comfort & moisture wicking
• 2" all-leather overbelt minimizes bag movement
• Nickel-plated steel buckles & hardware
• Built-in suspender attachment loops
• Edge-stitched construction
• Made in the USA

Applications

• Daily tool carry for construction and trades
• Carpentry and framing rigs needing strong back support
• Electrical, plumbing, and finish work with multiple pouches
• Use with suspenders for balanced load distribution

Installation Overview

1. Confirm XXL sizing using the belt-size guide.
2. Thread tool bags onto the 2" overbelt and position.
3. Buckle the belt where you normally wear it and tighten.
4. Attach compatible suspenders to the built-in loops if desired.
5. Adjust using the strap holes for a secure, comfortable fit.

Key Features

• Wide 5” belt for enhanced back support
• Padded wool liner for moisture-wicking comfort
• 2” all-leather overbelt secures tool bags
• Heavy-duty, nickel-plated steel buckles and hardware
• Built-in suspender attachment loops
• Edge-stitched leather for strength and clean finish
• Made in the USA

Applications

• Jobsite tool carry with improved back support
• Secure attachment of tool bags for carpentry and trades
• Comfortable wear for long shifts with moisture control
• Use with suspenders for balanced load distribution

Installation Overview

1. Measure your current tool belt per sizing guide to confirm Small.
2. Buckle the belt at your typical working position over clothing.
3. Thread and tighten the 2” overbelt to lock tool bags in place.
4. Attach compatible suspenders to the built-in loops if needed.
5. Adjust for comfort and verify secure fit before use.

Occidental Leather B5135 XL Features

• Wide 5″ belt for enhanced back support
• Thick padded wool liner for comfort and moisture management
• 2″ all–leather overbelt with loops to minimize bag sliding
• Nickel–plated steel buckles and hardware
• Suspender attachment loops
• Edge–stitched construction for strength and clean finish
• Made in the USA

Occidental Leather B5135 XL Applications

• Stabilizing and supporting tool bags for daily jobsite use
• Carpentry, framing, and finish work requiring extended wear
• Use with suspenders for balanced weight distribution
• General construction and remodeling tasks

Occidental Leather B5135 XL Installation Overview

1. Measure your existing tool belt from buckle to the hole used to confirm size.
2. Wear over typical work clothing and fasten at the midpoint hole.
3. Attach tool bags to the overbelt and secure through belt loops.
4. Clip compatible suspenders to the built–in loops if desired.

Key Features

• Wide 5″ belt for enhanced back support
• Suspender attachment loops
• Thick padded wool liner for comfort & moisture wicking
• Heavy-duty buckles & belt loops minimize bag sliding
• Edge-stitched leather for added strength
• Made in USA

Applications

• Supportive work belt for carrying tool bags on the jobsite
• Compatible with suspenders for heavier load distribution
• Comfort-focused rig for framing, carpentry, and general construction
• Moisture-wicking liner ideal for all-day wear in variable conditions

Installation Overview

1. Measure the belt you currently wear where you use it over work clothes.
2. Note the hole used to fasten; remove belt and lay flat.
3. Measure from the end of the buckle to the used hole to confirm size.
4. Buckle at the midpoint hole; adjust 4″ either direction for fit.
5. Attach suspenders to loops and secure tool bags to the overbelt.

Occidental Leather 5135 SM Features

• Wide 5" belt for enhanced lower?back support
• Thick padded wool liner for comfort and moisture wicking
• 2" all?leather overbelt keeps tool bags locked in place
• Nickel?plated steel buckles and robust belt loops minimize bag sliding
• Edge?stitched leather for added strength and clean finish
• Suspender attachment loops integrated
• Made in the USA

Occidental Leather 5135 SM Applications

• Daily tool carry for carpenters, framers, and general trades
• Jobs requiring strong back support and secure bag retention
• Use with suspenders for heavier loadouts

Occidental Leather 5135 SM Installation Overview

1. Measure a belt you wear at work from buckle end to the hole used; match size.
2. Wear over typical work layers and fasten near the midpoint hole for adjustability.
3. Attach tool bags to the 2" overbelt and position as preferred.
4. Clip suspenders to built?in loops if added support is needed.

Key Features

• 5″ wide belt for enhanced back support
• Padded wool liner for moisture?wicking comfort
• 2″ all?leather overbelt helps prevent bag sliding
• Nickel?plated steel buckles & hardware
• Built?in suspender attachment loops
• Edge?stitched construction for strength and clean finish
• Made in the USA

Applications

• Daily use with carpenter and framer tool rigs
• General construction and remodeling setups
• Electrical, HVAC, and trim work where belt?mounted bags are used
• Jobs requiring suspender?compatible load distribution
• Comfort upgrade for heavy tool carry on site

Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm Large (approx. 41″ midpoint).
2. Position the belt over work clothing and fasten at the midpoint hole for optimal adjustment.
3. Thread and secure tool bags onto the 2″ overbelt; tighten to minimize sliding.
4. Attach suspenders to the integrated loops if extra load support is needed.
5. Check fit and comfort; adjust buckle and overbelt tension as required.

Occidental Leather 5135 M Key Features

• Wide 5″ belt for enhanced back support
• Padded wool liner for moisture-wicking comfort
• 2″ all-leather overbelt minimizes bag sliding
• Nickel-plated steel buckles and built-in suspender loops
• Edge-stitched leather for added strength
• Made in USA

Occidental Leather 5135 M Applications

• Daily wear for tradespeople needing strong back support
• Securing tool bags for carpentry, framing, and finish work
• Use with suspenders to distribute heavy loads
• Jobsite environments requiring durable leather belts

Occidental Leather 5135 M Installation Overview

1. Put the belt on over your normal work clothes where you typically wear it.
2. Note the hole you use to fasten the buckle.
3. Remove the belt and measure from the end of the buckle to the used hole to determine belt size.
4. Select the size closest to your measurement; belts have 4″ adjustment each way.
5. Attach tool bags to the 2″ overbelt and connect suspenders to the loops if desired.

Key Features

• 5" wide belt for enhanced back support
• Padded wool liner for comfort and moisture wicking
• 2" all-leather overbelt secures tool bags
• Nickel-plated steel buckles & hardware
• Suspender attachment loops integrated
• Edge-stitched construction for strength and clean finish
• Made in the USA

Applications

• Daily jobsite tool carry with improved back support
• Securing Occidental tool bags to reduce sliding
• Use with suspenders for balanced load distribution
• Carpentry, framing, and general construction tasks
• Comfort-focused wear for long shifts

Installation Overview

1. Select correct size (Medium) per belt-sizing guide.
2. Fasten belt around work clothing using buckle holes for a snug fit.
3. Slide tool bags onto the 2" overbelt and position as needed.
4. Secure bags using belt loops to minimize sliding.
5. Attach compatible suspenders to the built-in loops if desired.

Key Features

• FatLip leather mouth keeps pouches open & resists wear
• Full leather boot with abrasion-resistant industrial nylon exterior
• Hand-specific tool holder layout for left-handed users
• Padded, two-ply foam core helps bags keep their shape
• 3″ HD Ranger belt for stability and comfort
• Includes center-back 2-in-1 Tool & Hammer Holder
• 25 total pockets & tool holders
• Made in the USA

Applications

• Framing and production carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Deck building and exterior carpentry
• Trim and finish tasks requiring left-hand layout

Installation Overview

1. Measure your current tool belt per manufacturer sizing to confirm Large.
2. Thread both pouches and the 2-in-1 holder onto the 3″ Ranger belt.
3. Position tool bag on left side and fastener bag on right for left-hand use.
4. Buckle belt at the midpoint hole; adjust for a secure, comfortable fit.
5. Load tools and fasteners; verify balance and access to frequently used items.

Key Features

• 22 pockets & tool holders for high-capacity organization
• Hand-specific tool layout with NoSpill™ leather holders
• Padded two?ply bags maintain shape even when empty
• Extremely abrasion-resistant industrial nylon with leather reinforcements
• OxyRed™ leather reinforces stress points
• Made in USA

Applications

• Framing and general carpentry tool organization
• Left-handed builder workflows on residential and commercial jobsites
• Fastener and hand tool storage for efficient access

Installation Overview

1. Verify belt size fit for XXL; adjust buckle to midpoint hole for comfort.
2. Slide tool and fastener bags onto the work belt in left-handed configuration.
3. Attach hammer holder and position accessories within reach.
4. Load tools and fasteners; balance weight across both sides.
5. Final check: ensure bag rivets and snaps are secure before use.

Key Features

• 25 pockets & tool holders for organized storage
• Hand-specific tool layouts for efficiency
• Padded two?ply bags maintain shape when empty or loaded
• Extremely abrasion?resistant industrial nylon exterior
• Full leather boot with leather FatLip opening resists wear
• 3″ HD Ranger belt for comfort and stability
• Made in USA

Applications

• Framing and production carpentry
• Remodeling and general construction
• Deck building and exterior carpentry
• Jobsite fastener and hand tool organization
• Daily professional use in rugged conditions

Installation Overview

1. Measure your current tool belt at the buckle to confirm XXXL sizing.
2. Position the tool bag on the dominant side and fastener bag on the opposite side.
3. Thread the 3″ Ranger belt through both bags and center the 2?in?1 holder at the rear.
4. Adjust belt for a secure, comfortable fit over work clothing.
5. Load tools and fasteners into dedicated holders for balanced carry.

Key Features

• FatLip leather mouth — holds shape and resists wear
• Full leather boot with corner reinforcements
• Two-ply foam core, padded bags maintain form
• Extremely abrasion-resistant industrial nylon exterior
• Hand-specific tool holder layout
• 3" HD Ranger belt for stability
• 25 pockets & tool holders
• Made in USA

Applications

• Framing and production carpentry
• Remodeling and finish work tool organization
• Jobsite workflow optimization with hand-specific layout
• General construction tool and fastener carry

Installation Overview

1. Measure your existing tool belt (buckle end to used hole) to confirm size per the size guide.
2. Attach the tool bag and fastener bag to the belt; place tool bag on dominant-hand side.
3. Install the center 2-in-1 tool & hammer holder.
4. Load tools and adjust belt to a comfortable, secure fit.
5. Verify bags sit level and openings remain formed for easy access.

Key Features

• 22 pockets & tool holders for organized storage
• Hand-specific NoSpill™ leather tool holders
• Padded two-ply bags maintain shape even when empty
• Industrial nylon with leather holders and corner reinforcements
• Lightweight, durable OxyLights design
• Made in USA

Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Left-handed workflow optimization

Installation Overview

1. Select the correct size (Medium) and position the belt where you wear your rig.
2. Adjust the HD 3" Ranger Work Belt for a secure, comfortable fit.
3. Attach included bags and hammer holder to preferred positions.
4. Load tools and fasteners into hand-specific pockets for left-handed use.
5. Check balance and retention; re-adjust for comfort as needed.

Key Features

• 22 pockets & tool holders
• Hand-specific tool layout with NoSpill leather holders
• Padded two-ply bags maintain shape
• Industrial nylon with leather reinforcement for durability
• Made in USA

Applications

• Framing and rough carpentry tool organization
• Jobsite fastener and tool carry for left-handed builders
• General construction and remodeling workflows
• Daily use where lightweight, durable storage is needed

Installation Overview

1. Adjust the HD Ranger belt to your measured belt size and secure buckle.
2. Position tool and fastener bags on preferred left-handed layout.
3. Attach hammer holder and ensure all rivets/slots are seated.
4. Load tools into dedicated pockets and NoSpill holders.
5. Test fit and make final adjustments for comfort and balance.

Occidental Leather 8080DBLHXXXL Features

• Left-handed, hand-specific tool layout for natural workflow
• Padded, two-ply tool bags maintain their shape
• Extremely abrasion-resistant industrial nylon with leather reinforcements
• Main bag corners reinforced with OxyRed leather
• Made in USA
• 20 total pockets and tool holders

Occidental Leather 8080DBLHXXXL Applications

• Framing and general carpentry setup
• Carrying fasteners, hand tools, and a 30' class tape
• Jobsite use where balanced, durable tool storage is needed

Occidental Leather 8080DBLHXXXL Installation Overview

1. Size the belt to your working waist over typical jobsite clothing.
2. Position tool and fastener bags for a left-handed layout.
3. Secure the hammer holder and load tools to preferred pockets.
4. Check balance and adjust belt fit for comfort.

Occidental Leather 5089LH XL Features

• Premium top-grain leather construction
• Seven-pouch layout with 23 pockets & tool holders
• NoSpill Tool Holder System for secure, efficient layout
• 12-oz belting leather with steel roller buckle
• Copper-riveted main bags for long-term durability
• Function-engineered for framers; left-handed orientation
• Made in the USA

Occidental Leather 5089LH XL Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• On-site tool and fastener organization
• Layout work requiring quick access to hand tools

Occidental Leather 5089LH XL Installation Overview

1. Measure where you wear your tool belt to confirm XL sizing; buckle at midpoint hole.
2. Place the tool bag on the left side and the fastener bag on the right for left-handed use.
3. Adjust the 3″ Ranger belt for a secure, comfortable fit over work clothing.
4. Load tools and fasteners into dedicated holders to utilize the NoSpill layout.
5. Check buckle, rivets, and pouches before use; re-adjust as needed during the day.

Key Features

• Premium top-grain leather construction
• Seven-pouch layout for maximum tool and fastener capacity
• NoSpill™ tool holder system for secure organization
• 12-oz belting leather with steel roller buckle
• Main bags reinforced with hand-set copper rivets
• Function-engineered for modern framers
• Made in the USA
• Left-handed configuration

Applications

• Framing and structural carpentry
• General construction and remodel work
• Jobsite tool and fastener organization
• Production carpentry requiring high-capacity pouches

Installation Overview

1. Size the belt to your workwear and preferred carry height.
2. Position tool and fastener bags per left-handed layout (tool bag left, fastener bag right).
3. Buckle and adjust for a secure, comfortable fit.
4. Load tools and fasteners; use the NoSpill™ holders to organize frequently used items.
5. Confirm balance and accessibility; re-adjust as needed.

Key Features

• 25 pockets & tool holders with hand-specific layout
• FatLip leather mouth stays open & resists abrasion
• Full leather boot with rugged industrial nylon exterior
• Padded, two-ply bags maintain shape loaded or empty
• 3″ HD Ranger belt with rear 2-in-1 tool & hammer holder
• Made in USA

Applications

• Framing and production carpentry tool organization
• General construction where fast access to tools/fasteners is needed
• Left-handed setup to optimize workflow on the jobsite

Installation Overview

1. Select correct size (XL) per belt sizing guide.
2. Position tool bag on left side and fastener bag on right for left-hand use.
3. Thread pouches onto the 3″ Ranger belt and secure buckle.
4. Attach the 2-in-1 center holder; adjust belt for comfort and support.
5. Load tools/fasteners and verify clear access to frequently used items.

Key Features

• 25 pockets & tool holders for efficient organization
• Hand-specific layout optimized for left-handed workflow
• Padded two-ply foam core bags maintain shape
• Abrasion-resistant industrial nylon with leather reinforcements
• Full leather boot & FatLip leather mouth protects opening
• HD 3″ Ranger belt with center 2-in-1 tool/hammer holder
• Made in USA

Applications

• Production carpentry tool organization
• Framing & general construction tasks
• Jobsite efficiency for left-handed builders
• Daily carry of fasteners, measuring & hand tools

Installation Overview

1. Measure your current tool belt per size guide to confirm Medium.
2. Thread the HD 3″ Ranger belt through both FatLip bags.
3. Place the Tool Bag on the left side & Fastener Bag on the right.
4. Attach the 2-in-1 tool & hammer holder at center back.
5. Buckle at the midpoint hole; adjust for comfort and stability.
6. Load tools and verify balance before use.

Occidental Leather 8089LH XL Features

• Lightweight nylon + leather construction for reduced bulk
• Left-handed, hand-specific tool layout for efficient workflow
• NoSpill all-leather tool holders for secure access
• Padded, two-ply bags retain shape even when empty
• OxyRed leather reinforcement at high-wear points
• Made in the USA

Occidental Leather 8089LH XL Applications

• Framing and rough carpentry setups
• General construction tool organization
• Remodeling and jobsite tasks requiring fast access to tools and fasteners

Occidental Leather 8089LH XL Installation Overview

1. Measure and adjust the 3 in. Ranger Work Belt for an XL fit at the midpoint hole.
2. Position the left-handed tool and fastener bags on the belt to your preference.
3. Secure the hammer holder and any clip-on accessories.
4. Load tools and fasteners; confirm balanced weight and comfortable reach.

Key Features

• FatLip leather mouth — holds shape and resists abrasion
• Full leather boot with corner reinforcement
• Hand-specific tool holder layout (Left-handed)
• Padded two-ply foam core bags that keep their shape
• Abrasion-resistant industrial nylon exterior
• 3″ HD Ranger belt with center 2-in-1 tool & hammer holder
• Made in USA

Applications

• Framing and production carpentry
• General construction tool organization
• Jobsite workflow optimization for left-handed users
• Carrying fasteners, hand tools, and layout gear

Installation Overview

1. Measure your current tool belt per the size guide; select XXXL.
2. Thread the HD Ranger belt through the tool and fastener bags.
3. Position tool bag on the left and fastener bag on the right for left-handed use.
4. Attach the 2-in-1 holder at center back; seat tools and hammer.
5. Buckle at the midpoint hole and adjust for comfort and stability.

Key Features

• 21 pockets & tool holders for efficient organization
• Hand-specific tool holder layout
• Padded two-ply nylon bags maintain structure
• Extremely abrasion-resistant industrial nylon
• Leather tool holders and corner reinforcement
• Made in USA

Applications

• Framing and general carpentry tool carry
• Jobsite fastener and tool organization
• Daily wear for professional builders seeking lighter-weight gear

Installation Overview

1. Select the correct XL belt size and secure around the hips.
2. Attach the tool and fastener bags to the belt in your preferred handed layout.
3. Slide the hammer holder onto the belt and position centrally or to preference.
4. Load tools and fasteners; adjust strap and belt for comfort.
5. Verify pockets and holders are seated and balanced before use.

Key Features

• 21 pockets & tool holders for efficient organization
• Hand-specific layout keeps frequently used tools ready
• Padded, two-ply nylon bags maintain structure when loaded
• Extremely abrasion-resistant industrial nylon
• Leather tool holders and corner reinforcement for durability
• Made in USA

Applications

• Framing and general carpentry
• Rough construction and remodel work
• Jobsite tool and fastener organization
• Daily use by professional trades

Installation Overview

1. Measure and select the correct belt size; wear over typical work layers.
2. Adjust the HD Ranger belt for a snug, centered fit.
3. Position tool and fastener bags on preferred sides; secure to belt.
4. Attach hammer holder and any clip-on accessories.
5. Load tools/fasteners and verify balance and accessibility.

Occidental Leather 8585LHSM Key Features

• 25 pockets & tool holders for organized storage
• Hand-specific layout optimized for left-handed use
• Padded two-ply bags maintain shape
• Industrial nylon exterior with leather reinforcements for abrasion resistance
• Full leather boot and leather FatLip mouth keep pouches open & protected
• Made in USA

Occidental Leather 8585LHSM Applications

• Framing & production carpentry
• General construction & remodeling
• Deck building and exterior carpentry
• Jobsite tool organization for left-handed users
• Daily carry of fasteners, hand tools, and layout gear

Occidental Leather 8585LHSM Installation Overview

1. Measure and select the correct belt size; fasten at midpoint hole.
2. Attach tool bag and fastener bag to the belt in left-handed configuration.
3. Secure the rear 2-in-1 tool & hammer holder to the center back.
4. Load primary tools and fasteners into hand-specific pockets.
5. Adjust belt fit and confirm all components are firmly seated.

Key Features

• 23 pockets & tool holders for high-capacity organization
• Premium top-grain leather construction
• NoSpill Tool Holder System for secure layout
• 12-oz. belting leather with steel roller buckle
• Copper rivet reinforcements on main bags
• Function-engineered for framers; left-handed setup
• Made in USA

Applications

• Framing and rough carpentry
• General construction tool & fastener organization
• Left-handed workflow optimization on the jobsite
• High-capacity setups needing quick access to tools

Installation Overview

1. Select correct belt size; buckle at midpoint hole for best fit.
2. Wear tool bag on dominant (left) side; fastener bag on right.
3. Adjust belt for comfort over typical work clothing.
4. Load tools into NoSpill holders; place fasteners by task.
5. Verify hammer holder and tape holder are accessible and secure.

Key Features

• Left-handed layout: tool bag left, fastener bag right
• Seven-pouch setup with 23 pockets/tool holders for organization
• Premium top-grain leather with hand-set copper rivets
• HD 3" Ranger leather belt with steel roller buckle
• NoSpill Tool Holder System maintains secure tool placement
• Function-engineered for modern framing professionals
• Made in the USA

Applications

• Framing and rough carpentry tool and fastener carry
• Jobsite organization for hammers, squares, chisels, and fasteners
• High-capacity setups requiring quick access to tools
• Daily professional contractor use in demanding conditions

Installation Overview

1. Measure and adjust the HD 3" Ranger belt for a secure, comfortable fit over work clothing.
2. Position the tool bag on the left side and fastener bag on the right for left-handed use.
3. Attach the hammer holder at the rear center for balanced carry.
4. Load tools by category into purpose-built holders to utilize the NoSpill layout.
5. Verify pouch balance and tighten the steel roller buckle before work.

Key Features

• FatLip leather-reinforced bag mouth stays open & protects from wear
• Full leather boot bases for heavy-duty longevity
• Hand-specific tool holders optimized for left-handed users
• Padded two-ply foam core helps bags keep their shape
• Extremely abrasion-resistant industrial nylon with leather reinforcements
• HD 3″ Ranger belt for stability and comfort
• Made in the USA

Applications

• Framing and production carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Left-handed workflow setups

Installation Overview

1. Measure and confirm belt size; select XXL for proper fit.
2. Thread the tool bag, fastener bag, and center 2-in-1 holder onto the belt.
3. Position tool bag on the left and fastener bag on the right for left-handed use.
4. Buckle the belt at a comfortable hole and adjust for balance.
5. Load tools and check that pockets and holders are accessible and secure.

Occidental Leather 8089LHSM Features

• 22 pockets & tool holders for comprehensive storage
• Hand-specific tool layout with NoSpill leather holders
• Padded two-ply bags maintain shape
• Industrial nylon body with leather tool holders & corner reinforcement
• OxyRed leather reinforces stress points
• Made in USA

Occidental Leather 8089LHSM Applications

• Framing and general carpentry tool organization
• Jobsite fastener and tool carry for left-handed builders
• Daily use where lightweight, durable storage is needed
• Efficient workflow with hand-specific tool placement

Occidental Leather 8089LHSM Installation Overview

1. Measure and select the correct belt size; buckle at midpoint for comfort.
2. Place fastener and tool bags on the appropriate sides for left-handed layout.
3. Attach hammer holder and ensure all components are securely fastened.
4. Adjust belt fit over typical work clothing.
5. Load tools and fasteners; verify balanced weight and access.

Key Features

• 20 pockets & tool holders for organized storage
• Hand-specific holder layout; padded two-ply bags hold their shape
• Industrial nylon with leather tool holders & reinforced corners
• Right-side gun/finisher holster fits impact or screw guns
• Lightweight, jobsite-tough construction — Made in the USA

Applications

• Metal stud framing and fastening
• Finish carpentry layout and installation
• Remodeling and punch-list tasks
• General fastening and tool organization on site

Installation Overview

1. Select correct size (XXL) and adjust the 5035 Ranger belt for a centered buckle fit.
2. Position 8068 gun bag on the right and B8064 fastener bag on the left as preferred.
3. Secure the 5020 2-in-1 Tool & Hammer Holder at the rear or side for balance.
4. Load tools and fasteners; distribute weight evenly between bags.
5. Re-check fit and retighten belt after loading.

Key Features

• 20 pockets & tool holders for efficient organization
• Hand-specific tool holder layout
• Padded, two-ply bags hold shape under load
• Industrial nylon with leather-reinforced corners & holders
• Right-side gun/finisher holster for impact or screw guns
• Made in USA

Applications

• Metal stud framing — carry drivers, clamps, and layout tools
• Finish carpentry — organize fasteners and precision tools
• Remodeling tasks — versatile storage for mixed trades

Installation Overview

1. Measure for belt size per manufacturer guidance; select Medium.
2. Attach fastener bag (B8064) to left side and gun bag (8068) to right side.
3. Install the 2-in-1 tool & hammer holder on the rear belt position.
4. Load tools and fasteners; adjust belt for comfortable fit.
5. Verify balance and access to frequently used tools.

Key Features

• 20 pockets & tool holders for organized storage
• Hand-specific tool holder design
• Padded, two-ply tool bags maintain shape
• Extremely abrasion-resistant industrial nylon
• Leather tool holders & corner reinforcement
• Made in USA

Applications

• Metal framing
• Finish carpentry
• Remodeling tasks

Installation Overview

1. Measure and select the correct belt size; fasten at your typical wear point.
2. Attach included bags and holders to the HD 3″ Ranger belt.
3. Adjust belt fit and position for comfort and balance.
4. Load tools and fasteners; place driver/screw gun in the holster.
5. Verify secure attachment of all components before use.

Occidental Leather B5080DBLHXL Key Features

• 22 pockets and holders for organized carry
• Premium top?grain leather construction
• Hand?Specific tool holder placement for workflow efficiency
• Copper?riveted reinforcement on main bags
• NoSpill holder system keeps tools secure
• Function?engineered for modern builders

Applications

• Framing and general carpentry tool organization
• Jobsite carry for fasteners, tape, hammer, and layout tools
• Construction tasks requiring fast access to tools

Installation Overview

1. Select the correct belt size and position it at your normal wear point.
2. Attach fastener bag, tool bag, and hammer holder to preferred sides.
3. Adjust for comfort and balance; secure the buckle.
4. Load tools and fasteners; ensure NoSpill holders are seated.

Occidental Leather B5080DBLH M Pro Framer Set - Black Features

• Premium top-grain leather construction for long service life
• Hand Specific™ tool holder placement for efficient workflow
• NoSpill™ holder system keeps tools secure
• Copper rivet reinforcement on main bags
• Function-engineered layout with 22 pockets & holders
• Made in the USA

Occidental Leather B5080DBLH M Pro Framer Set - Black Applications

• Framing and structural carpentry
• General carpentry tool organization
• Jobsite fastening and layout tasks
• Finish work where secure, accessible storage is needed

Occidental Leather B5080DBLH M Pro Framer Set - Black Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine belt size.
2. Fit the belt over typical work clothing and adjust to a comfortable midpoint hole.
3. Attach tool bags and hammer holder to preferred left-handed layout.
4. Load tools and fasteners; confirm balance and accessibility before use.

Key Features

• 22 pockets & tool holders for comprehensive capacity
• Premium top-grain leather construction built for heavy outdoor use
• Hand Specific™ tool placement to maximize working rhythm
• Copper rivets reinforce primary stress areas
• NoSpill tool holder system keeps tools secure and accessible
• Function-engineered layout for modern builders

Applications

• Framing and rough carpentry
• General construction and remodeling
• Deck building and exterior work
• Finish prep and punch list tasks
• Jobsite tool and fastener organization

Installation Overview

1. Select correct belt size and position over typical workwear.
2. Thread the belt through bag tunnels and the hammer holder.
3. Place fastener and tool bags on the preferred sides for left-hand use.
4. Buckle the belt and adjust for snug, comfortable support.
5. Load tools and verify balance and access; re-adjust placement as needed.

Occidental Leather B5060LH Features

• Left-handed layout worn on the right side
• Three stacked pouch design with top-access tier
• 9 pockets & tool holders for efficient organization
• Dedicated holders for 1" blade square, angle square, driver bits, and cat’s paw
• Premium, reinforced leather construction
• Made in USA

Occidental Leather B5060LH Applications

• Framing tasks needing quick fastener access
• General carpentry tool and fastener organization
• Layout work with squares and driver bits
• Optimized carry for left-handed workflows

Occidental Leather 5530 XXXL Stronghold Big Oxy Set Key Features

• Round-bottom full-capacity bags for increased space & durability
• NoSpill, hand-specific tool holder system enhances workflow
• Premium top-grain leather
• 3" heavy-duty work belt — 12 oz. English bridle leather with steel roller buckle
• 28 pockets & tool holders
• Made in the USA

Occidental Leather 5530 XXXL Stronghold Big Oxy Set Applications

• Framing and rough carpentry
• Trim and finish carpentry
• General construction and remodeling
• Daily jobsite tool organization for professional trades

Occidental Leather 5530 XXXL Stronghold Big Oxy Set Installation Overview

1. Select XXXL size using the manufacturer’s belt sizing guide.
2. Arrange tool and fastener bags on the belt in the preferred left/right layout.
3. Buckle the 3" work belt and adjust for a secure, comfortable fit.
4. Attach the Oxy Tool Shield and the 2-in-1 Tool & Hammer Holder.
5. Load tools and fasteners; check balance and accessibility.