Occidental Leather
Occidental Leather 410020 XL Sawdust Sage Badger Belt Extra Large
Occidental Leather 410020 XL Description
Experience ultimate comfort and durability with the Sawdust Sage Badger Belt in XL. Built with 1000 Denier CORDURA® nylon, American-made foam, and an AustriAlpin COBRA buckle, this work belt delivers lightweight strength and long-lasting support for demanding days.
Occidental Leather 410020 XL Includes
- (1) Badger Belt
Occidental Leather 410020 XL Features
- AustriAlpin COBRA buckle for secure, reliable fastening
- American-made foam with thick padding for comfort
- 1000 Denier CORDURA® nylon with water-repellent coating
- USA-made tactical webbing reinforces pouch bottoms for puncture & abrasion resistance
- Lightweight, tough build designed for long service life
- Made in USA
Occidental Leather 410020 XL Applications
- Comfortable everyday wear for tool belts on the jobsite
- Supports attached pouches and holsters for organized carry
- Work in abrasive environments where durability is critical
- Outdoor tasks where water-repellent materials are beneficial
Occidental Leather 410020 XL Installation Overview
- Select XL size; verify fit around the waist.
- Thread tool pouches/holsters onto the belt webbing as needed.
- Buckle the COBRA clasp and adjust straps for a snug, comfortable fit.
- Ensure D-rings and attachment points are seated and secure.
Occidental Leather 410020 XL Specifications
| Size | XL |
| Padded Portion of Belt Size | 45" (114 cm) |
| Belt Height | 46" – 50" (117 – 127 cm) |
| Color | Sawdust Sage |
| Type | Tool Belt |
| Material | 1000 Denier CORDURA® Nylon with water-repellent coating |
| Buckle | AustriAlpin COBRA |
| Weight | 1.2 lb |
| Made In | USA |
Occidental Leather 410020 XL Sawdust Sage Badger Belt Extra Large
XL Sawdust Sage Badger Tool Belt
✓ COBRA buckle for secure closure
✓ 1000D CORDURA nylon with water-repellent finish
✓ Padded foam interior for all-day comfort
✓ Reinforced pouch areas resist punctures & abrasion
✓ Made in USA
Out of stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Care and Maintenance
- If pouches or accessories are attached, remove them before cleaning.
- Brush or shake off loose dirt and debris.
- Spot clean or hand wash the 1000D CORDURA nylon with mild soap and lukewarm water using a soft brush or sponge.
- Do not use bleach, fabric softeners, petroleum/solvent-based cleaners, or harsh chemicals; these can damage the water?repellent coating, foam padding, and webbing.
- Rinse thoroughly and gently press out excess water—do not wring.
- Air dry completely out of direct heat and sunlight; do not tumble dry or iron.
- Keep the metal COBRA buckle and other hardware free of grit; after cleaning, wipe dry to maintain smooth operation.
- Store clean and dry in a cool, ventilated place away from chemicals. Inspect stitching, webbing, and hardware regularly and discontinue use if damaged.
- AustriAlpin COBRA buckle for secure fastening
- American-made foam padding for all-day comfort
- 1000 Denier CORDURA® nylon with water-repellent coating
- Reinforced pouch bottoms with USA tactical webbing for abrasion resistance
- Lightweight, durable construction — Made in USA
- Size: XL
- Padded Portion of Belt Size: 45" (114 cm)
- Belt Height: 46" – 50" (117 – 127 cm)
- Color: Sawdust Sage
- Type: Tool Belt
- Material: 1000 Denier CORDURA® Nylon
- Weight: 1.2 lb
More About Occidental Leather 410020 XL Sawdust Sage Badger Belt Extra Large
Occidental Leather 410020 XL Description
Experience ultimate comfort and durability with the Sawdust Sage Badger Belt in XL. Built with 1000 Denier CORDURA® nylon, American-made foam, and an AustriAlpin COBRA buckle, this work belt delivers lightweight strength and long-lasting support for demanding days.
Occidental Leather 410020 XL Includes
- (1) Badger Belt
Occidental Leather 410020 XL Features
- AustriAlpin COBRA buckle for secure, reliable fastening
- American-made foam with thick padding for comfort
- 1000 Denier CORDURA® nylon with water-repellent coating
- USA-made tactical webbing reinforces pouch bottoms for puncture & abrasion resistance
- Lightweight, tough build designed for long service life
- Made in USA
Occidental Leather 410020 XL Applications
- Comfortable everyday wear for tool belts on the jobsite
- Supports attached pouches and holsters for organized carry
- Work in abrasive environments where durability is critical
- Outdoor tasks where water-repellent materials are beneficial
Occidental Leather 410020 XL Installation Overview
- Select XL size; verify fit around the waist.
- Thread tool pouches/holsters onto the belt webbing as needed.
- Buckle the COBRA clasp and adjust straps for a snug, comfortable fit.
- Ensure D-rings and attachment points are seated and secure.
Occidental Leather 410020 XL Specifications
| Size | XL |
| Padded Portion of Belt Size | 45" (114 cm) |
| Belt Height | 46" – 50" (117 – 127 cm) |
| Color | Sawdust Sage |
| Type | Tool Belt |
| Material | 1000 Denier CORDURA® Nylon with water-repellent coating |
| Buckle | AustriAlpin COBRA |
| Weight | 1.2 lb |
| Made In | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
