All Products

Key Features

• 28 pockets & tool holders for high-capacity organization
• Round-bottom full-capacity leather bags for durability & easier access
• NoSpill, hand-specific holder layout maximizes working rhythm
• Premium top-grain leather construction
• 3" heavy-duty work belt with steel roller buckle
• Includes Oxy Tool Shield & 2-in-1 Tool & Hammer Holder
• Made in the USA

Applications

• Framing: Carry nails, layout tools, and a hammer for fast-paced builds
• Trim carpentry: Keep finish tools organized and accessible
• General carpentry: Versatile storage for day-to-day jobsite tasks
• Heavy-duty construction: Heritage-grade rig for demanding conditions
• Tool protection: Shield sharp tools to prevent bag damage

Installation Overview

1. Size the belt: Measure your current tool belt and select XXL per sizing guidance.
2. Attach components: Secure fastener and tool bags to the belt; clip on the Oxy Tool Shield and 2-in-1 holder.
3. Arrange hand-specific layout: Position tool holders for dominant hand access.
4. Adjust fit: Buckle the belt and fine-tune for comfort and support.
5. Load tools: Place frequently used tools in outer pockets; store sharp tools in the Tool Shield.

Occidental Leather 5530 SM Features

• 28 pockets & tool holders for high-capacity storage
• Heritage-grade premium top-grain leather construction
• Round-bottom, full-capacity bag design for added space & durability
• Hand-specific NoSpill holder system to maintain workflow
• 3" heavy-duty 12 oz. English bridle leather belt with steel roller buckle
• Includes Oxy Tool Shield and 2-in-1 Tool & Hammer Holder
• Made in the USA

Occidental Leather 5530 SM Applications

• Framing and structural carpentry
• Trim work and finish carpentry
• General construction and remodeling
• Jobsite tool organization and transport

Occidental Leather 5530 SM Installation Overview

1. Measure the belt you currently wear from the end of the buckle to the hole used.
2. Select the size that matches the midpoint measurement (Small shown).
3. Load tools into hand-specific pockets for optimal balance.
4. Adjust the 3" belt for a secure fit; attach holders and shields as needed.

Occidental Leather 8060LH Key Features

• Left-handed layout — wear on right side
• 3-pouch design: main, outer, and upper bags
• Industrial nylon with leather reinforcements
• Dedicated holders for blade square, angle square, cat’s paw, driver bits
• 9 pockets & tool holders
• Lightweight, built for everyday comfort
• Made in the USA

Occidental Leather 8060LH Applications

• Framing: keep nails, layout tools, and fasteners at hand
• General carpentry: organized storage for common hand tools
• Layout work: carry blade square, angle square, and marking tools
• Remodeling: lightweight pouch for fastener management

Occidental Leather 8060LH Installation Overview

1. Thread your work belt through the leather tunnel on the pouch.
2. Position the fastener bag on the right side for left-handed setups.
3. Secure the pouch and verify comfortable reach to pockets and holders.
4. Load fasteners and layout tools into the designated pockets.

Occidental Leather 9520LH Key Features

• Compact, lightweight fastener bag for trim, framing & finish work
• Innovative round-bottom nylon main and outer bags maintain shape
• Patented 2-in-1 outer bag maximizes fastener capacity in a small footprint
• Speed square holder usable inside or outside
• Left-handed layout — wear on right side; includes Oxy Tool Shield
• Made in the USA

Occidental Leather 9520LH Applications

• Trim carpentry fastener organization
• Framing tasks needing quick access to nails, bits, and tools
• Finish work with dedicated storage for a speed square and small tools

Occidental Leather 9520LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Wear on the right side for left-handed setups.
3. Attach the Oxy Tool Shield to the bag or pocket as preferred.
4. Load tools and fasteners into designated pockets and holders.

Occidental Leather 5066LH Features

• Premium full-grain leather construction for long-term durability
• Angled design for ergonomic access, balance, and comfort
• Two dedicated holders for drill or driver bits
• Left-handed layout — typically worn on the right side
• Compatible with most cordless drills
• Lightweight at just 0.6 lb
• Made in the USA

Occidental Leather 5066LH Applications

• Hands-free carry of cordless drills on a work belt
• Quick-access holster setup for left-handed users
• General construction, carpentry, and remodeling tasks
• Electrical, plumbing, and HVAC installations
• Jobsites requiring secure drill retention and easy reach

Occidental Leather 5066LH Installation Overview

1. Slide the holster onto your work belt at the preferred position.
2. Orient for a left-handed draw (typically worn on right side).
3. Place the cordless drill into the main pocket.
4. Store driver/drill bits in the two front bit holders.
5. Use the retention strap as needed and verify stability.

Occidental Leather 8018DBLH Key Features

• Most popular OxyLights tool bag with streamlined 3-pouch layout
• Integrated tape holster fits up to 35’ FatMax-style tapes
• Purpose-built left-hand layout — worn on the left side
• Leather & nylon hybrid construction with reinforced corners
• Organizers for pencils, work knife, lumber crayon, chisel, torpedo level & hammer

Occidental Leather 8018DBLH Applications

• Carpentry & framing tool carry on the dominant (left) side
• General construction and remodel tool organization
• Finish work where compact, quick-access storage is needed
• Jobsite setup with tape, hammer, knives, chisels and layout tools

Occidental Leather 8018DBLH Installation Overview

1. Slide the tool bag onto a compatible work belt.
2. Position on the left side for left-handed use.
3. Load essential tools into dedicated holders and pouches.
4. Seat tape measure in the holster; check retention.
5. Adjust placement for comfort and secure fit before work.

Occidental Leather 5062LH Key Features

• 4-pouch stacked layout for expanded capacity
• 10 pockets & tool holders for fasteners and layout gear
• Left-handed orientation — worn on the right side
• Tool-specific slots for blade square, driver bits, cat’s paw, and angle square
• Full-grain leather construction for long-term durability
• Made in the USA

Occidental Leather 5062LH Applications

• Framing: Carry nails, cat’s paw, and layout squares
• General carpentry: Organize driver bits, nail sets, and fasteners
• Layout work: Store 1" blade square and angle square
• Jobsite setup: High-capacity pouch for daily tool access

Occidental Leather 5062LH Installation Overview

1. Select right side of body for left-handed orientation.
2. Slide the pouch onto a compatible work belt.
3. Secure positioning and balance with other bags.
4. Load fasteners and tools into dedicated pockets.
5. Verify comfortable access before use.

Occidental Leather 5060LH Features

• Left-handed fastener bag designed to be worn on the right side
• Three-pouch layout with top-access tier for efficient fastener storage
• Holders for 1" blade square, angle square, cat’s paw, driver bits & more
• Premium durable leather construction
• Made in the USA

Occidental Leather 5060LH Applications

• Framing — organized storage for nails and layout tools
• General carpentry — quick access to squares, bits, and fasteners

Occidental Leather 5060LH Installation Overview

1. Thread the bag onto a compatible work belt.
2. For left-handed users, position the fastener bag on the right side.
3. Load primary tools and fasteners into the three stacked pouches.
4. Place layout tools in the dedicated holders (square, bits, cat’s paw).
5. Check balance and adjust placement for comfortable access.

Occidental Leather B8018DB Key Features

• Most popular OxyLights tool bag with smart 3-pouch layout
• Integrated tape holster fits up to 35’ FatMax-style tapes
• Holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Right-hand tool bag layout — worn on the right side for dominant-hand access
• Industrial nylon & leather hybrid construction for strength with reduced weight

Occidental Leather B8018DB Applications

• Everyday tool carry for carpentry and framing tasks
• Fast access storage for measuring, marking, and cutting tools
• Jobsite organization when paired with a fastener bag

Occidental Leather B8018DB Installation Overview

1. Slide the bag onto a work belt (fits up to 3″ belts).
2. Position on the right side for dominant-hand access.
3. Load primary tools into the main and interior leather sleeves.
4. Place tape in the integrated holster; secure hammer in loop.
5. Confirm comfortable fit and balance before work.

Occidental Leather B5068 Key Features

• All-leather belt case with reinforced stitching for durability
• Secure snap closure to keep your calculator protected
• Fits belts up to 3 inches wide
• Compatible with Construction Master models I, II, III, IV and other brands
• Also available as Clip-On model B6568
• Made in USA

Occidental Leather B5068 Applications

• Jobsite protection and carry for construction calculators
• Belt-mounted storage for quick access while measuring and planning
• Compatible use with popular Construction Master calculator models

Occidental Leather B5068 Installation Overview

1. Slide the case onto a belt up to 3 inches wide.
2. Insert the calculator into the case.
3. Close the snap to secure the device.
4. Verify the case is seated firmly on the belt before use.

Occidental Leather B5018DB Key Features

• Double outer bags for fastener & small tool access
• Dedicated holders for pencils, work knife, crayon, chisel, torpedo level & hammer
• Tape measure holster fits up to a 35’ FatMax
• Right-side wear for dominant-hand tool access
• Premium leather construction; Made in USA

Occidental Leather B5018DB Applications

• Carpentry tool organization and quick access
• Framing & general construction layouts
• Measuring & marking with integrated tape & crayon holders
• Everyday jobsite carry on a work belt

Occidental Leather B5018DB Installation Overview

1. Slide the bag onto a compatible work belt (up to 3″ width).
2. Position on the right side for dominant-hand tool access.
3. Load tools into the main and outer pouches; use holders for layout tools.
4. Secure tape measure in the holster; check balance and comfort.

Occidental Leather 9850LH Key Features

• Left-handed layout for wearing on the right side
• FatLip bag design with structured mouth resists abrasion
• 10" deep industrial nylon bags with leather-reinforced bottoms and corners
• Adjust-to-Fit belt accommodates seasonal clothing changes (32"–41")
• D-rings pre-installed for use with suspension systems
• Includes Oxy Tool Shield and rear 2-in-1 Tool & Hammer Holder
• 24 total pockets and tool holders
• Made in the USA

Occidental Leather 9850LH Applications

• Framing and rough carpentry
• General construction and remodeling
• Deck and outdoor structure building
• Finish carpentry tool organization
• Jobsite fastener and hand tool carry

Occidental Leather 9850LH Installation Overview

1. Measure and adjust belt to fit over typical workwear (32"–41" range).
2. Position tool and fastener bags for a left-handed layout.
3. Secure 2-in-1 Tool & Hammer Holder at rear and attach Oxy Tool Shield.
4. Load tools and fasteners; balance weight across both sides.
5. Attach suspenders to D-rings if desired and verify comfortable fit.

Key Features

• Popular OxyLights fastener bag for framing and general carpentry
• Left-handed layout — worn on the right side for right-hand access
• Holders for 1" blade square, angle square, cat’s paw, and driver bits
• 4 stacked compartments with 10 total pockets/tool holders
• Made in the USA

Applications

• Framing tasks requiring organized fasteners and layout tools
• General carpentry and remodeling
• Left-handed setups needing right-side wear
• Keeping driver bits, squares, and pry tools readily accessible

Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for left-handed use.
3. Load fasteners and tools into the designated pockets and holders.
4. Confirm the bag sits securely and allows clear tool access.

Occidental Leather B5060 Key Features

• Three-pouch fastener layout keeps hardware and small tools organized
• Holders for 1" blade square, angle square, cat’s paw, and driver bits
• Premium leather construction for long-term durability
• Highly recommended for framing and general carpentry
• Made in the USA

Occidental Leather B5060 Applications

• Framing: Carry nails, layout tools, and drivers within reach
• General Carpentry: Organized storage for fasteners and bits
• Belt-mounted storage for everyday jobsite tasks

Occidental Leather B5060 Installation Overview

1. Thread the bag onto a compatible work belt through the back slot.
2. Position on the side opposite your primary tool bag for balance.
3. Load fasteners and layout tools into the designated pouches and holders.
4. Adjust belt fit and verify clear access to tools before work.

Occidental Leather 8576 Key Features

• Left-side clip-on gear pocket module for Stronghold suspenders
• Durable spring steel clip for fast on/off attachment
• 11 total pockets & tool holders for organized storage
• Padded smartphone sleeve with secure Velcro® flap
• Lightweight design — just 0.82 lbs
• Includes Oxy Tool Shield™ for sharp tool protection
• Made in the USA

Occidental Leather 8576 Applications

• Clip to Stronghold suspender chest strap to carry essentials
• Keep phone, markers, knife, and small tools at the ready
• Add left-side storage to Insta-Vest™ and suspender systems
• Ideal for trades needing quick-access organization on the chest

Occidental Leather 8576 Installation Overview

1. Open the spring steel clip on the rear of the pocket set.
2. Attach the clip to the chest strap of Stronghold suspenders.
3. Position on the left side for preferred reach.
4. Load tools into pockets and place sharp tools in the Oxy Tool Shield™.
5. Secure your smartphone inside the padded sleeve and close the Velcro® flap.

Occidental Leather 8575 Features

• Spring steel clip attaches to the chest strap of Stronghold suspenders
• Right-side configuration for quick access
• 7 pockets & tool holders for organized carry
• Safety glasses pocket with secure Velcro® flap
• Fastener pouch with closure
• Lightweight design at just 0.83 lbs
• Made in the USA

Occidental Leather 8575 Applications

• Add on-board storage to Stronghold suspenders
• Keep safety glasses protected and accessible
• Carry markers, bits, small tools, and fasteners
• Organize daily-use items for carpentry and jobsite tasks

Occidental Leather 8575 Installation Overview

1. Open the spring steel clip on the pouch back.
2. Clip onto the chest strap of Stronghold suspenders on the right side.
3. Ensure the pouch is seated securely and closures operate freely.
4. Load tools, glasses, and fasteners into the designated pockets.
5. Verify balance and retention before use.

Occidental Leather 410020 XL Features

• AustriAlpin COBRA buckle for secure, reliable fastening
• American-made foam with thick padding for comfort
• 1000 Denier CORDURA® nylon with water-repellent coating
• USA-made tactical webbing reinforces pouch bottoms for puncture & abrasion resistance
• Lightweight, tough build designed for long service life
• Made in USA

Occidental Leather 410020 XL Applications

• Comfortable everyday wear for tool belts on the jobsite
• Supports attached pouches and holsters for organized carry
• Work in abrasive environments where durability is critical
• Outdoor tasks where water-repellent materials are beneficial

Occidental Leather 410020 XL Installation Overview

1. Select XL size; verify fit around the waist.
2. Thread tool pouches/holsters onto the belt webbing as needed.
3. Buckle the COBRA clasp and adjust straps for a snug, comfortable fit.
4. Ensure D-rings and attachment points are seated and secure.

Occidental Leather 5014 Features

• Universal holster with open-bottom design
• Ideal for squares, pliers, side cutters, tin snips, and large crescent wrenches
• Durable leather construction for everyday use
• Belt-mounted carry — fits belts up to 3” wide
• Made in the USA

Occidental Leather 5014 Applications

• Hold and access pliers, snips, and cutters on the job
• Carry layout squares and small hand tools
• Organize wrenches and longer tools with pass-through bottom
• Add-on holster for tool belts and work belts

Occidental Leather 5014 Installation Overview

1. Slide the holster onto a work belt (up to 3” wide).
2. Position at preferred reach point on the belt.
3. Insert tools; longer tools can pass through the open bottom.
4. Confirm secure fit and accessibility before use.

Occidental Leather 8570 Features

• Fits most standard cell phones and gadgets
• Heavy-duty elastic side panels provide a snug, flexible fit
• Velcro® closure keeps device secure
• 2″ spring steel clip attaches to belts or waistbands

Occidental Leather 8570 Applications

• Everyday belt carry for phones on the jobsite
• Hands-free phone access while working
• Secure storage to prevent drops or loss
• Quick clip-on use with work belts or waistbands

Occidental Leather 8570 Installation Overview

1. Slide the 2″ spring steel clip over your belt or waistband.
2. Insert phone into the holster; elastic sides will expand to grip.
3. Close the Velcro® flap to secure the device.
4. Ensure the clip is fully seated and the flap is fastened before use.

Occidental Leather 9576 Features

• Complete carpenter’s kit in a portable tote
• Specific holders for commonly used hand tools
• Rugged leather carry handle for comfort and durability
• Heavy-duty leather shoulder strap for hands-free transport
• Made in the USA

Occidental Leather 9576 Applications

• Transporting and organizing carpentry hand tools
• Jobsite carry between work areas or vehicles
• Bench-side tool organization for small installations and repairs

Occidental Leather 9576 Specifications

Occidental Leather 5596 Features

• All-leather commercial-grade belt set
• Hand-specific organization for tools & fasteners
• NoSpill™ leather holders mold to tools for secure carry
• Designed for journeyman-level performance
• Made in the USA

Occidental Leather 5596 Applications

• Commercial & residential electrical install and service
• Rough-in wiring, outlets, switches & panel work
• Tool & fastener organization on the jobsite

Occidental Leather 5596 Installation Overview

1. Adjust belt to fit XL waist size and secure buckle.
2. Position left/right tool bags for hand-specific access.
3. Attach holders and pouches firmly to the belt stations.
4. Load tools; allow NoSpill™ leather to form to tool shapes.
5. Test fit and balance; make minor adjustments for comfort.

Key Features

• Patented 2-in-1 pouch with angle square holster
• 38 total pockets & tool holders for full organization
• Comfortable foam shoulder pads lined with Dri-Lex to wick perspiration
• Weight carried on upper body for reduced lower-back strain
• Removable left and right bags; clip together for freestanding access
• Vest can hang by D-ring at jobsite; bags removable for vest-only wear
• Ergonomic, belt-free design fits over seasonal clothing
• Not offered in a left-handed model

Applications

• Hands-free tool carry and organization on the jobsite
• Working in tight areas with freestanding, clip-together bags
• Reducing lower-back load by shifting weight to shoulders/chest
• General construction, remodeling, and maintenance tasks

Installation Overview

1. Adjust vest straps for a secure, comfortable fit over workwear.
2. Load tools and fasteners into the 38 pockets/holders as needed.
3. Clip removable bags to the vest or to each other for freestanding access.
4. Use the D-ring to hang the vest at the jobsite when not worn.
5. Re-adjust for seasonal layers to maintain unrestricted movement.