Sort by:
Occidental Leather 5017DB Description
Classic 3 pouch leather tool bag designed for right hand use. Features double outer bags and dedicated holders for hammer, pencil, work knife, chisel, torpedo level, and lumber crayon. Streamlined without a tape pocket. Made in USA.
Occidental Leather 5017DB Includes
- (1) 5017DB Tool Bag
Occidental Leather 5017DB Key Features
- Most popular layout without a tape pocket
- Double outer bags for added organization
- Holders for hammer, pencils, knife, crayon, chisel, torpedo level
- Right side wear for tools accessed with the right hand
- Available in left hand version as 5017DBLH
- Made in USA
Occidental Leather 5017DB Applications
- Organizing core hand tools on the jobsite
- Framing and general carpentry work
- Remodeling and installation tasks
- Trim and finish carpentry tool carry
- Daily use on professional work belts
Occidental Leather 5017DB Installation Overview
- Slide the bag onto a work belt up to 3 inches wide.
- Position on the right side for right hand access.
- Load tools into main and outer pockets and holders.
- Adjust placement for balance and comfort.
- Securely fasten belt and verify easy access to tools.
Occidental Leather 5017DB Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 in x 8 in |
| Outer Bag | 5 in x 5.5 in |
| Material | Leather |
| Weight | 1.9 lb |
| Belt Fit | Up to 3 in wide belts |
| Overall Size | 13 in x 12 in x 7 in |
| Color | Brown |
| Country of Origin | USA |
| UPC | 759244006803 |
Occidental Leather 5066 Description
Rugged all leather angled drill holster designed for balance, comfort, and quick access. Features two dedicated bit holders and fits most cordless drills. Made in the USA and available in right or left handed versions.
Occidental Leather 5066 Includes
- (1) Cordless Drill Holster
Occidental Leather 5066 Features
- Premium full grain leather construction for long term durability
- Angled ergonomic design for improved balance and access
- Two built in holders for drill or driver bits
- Fits most cordless drills
- Available in right or left handed versions; left handed model 5066LH
- Made in the USA
Occidental Leather 5066 Applications
- Hands free carry of cordless drills on the jobsite
- Quick access drilling for framing and carpentry
- Tool organization for electricians and installers
- General construction and remodeling tasks
Occidental Leather 5066 Installation Overview
- Slide holster onto your work belt at the preferred position.
- Adjust placement for comfortable angled access.
- Secure the retention strap snap if desired.
- Insert drill fully; place bits in the dedicated holders.
- Test movement to ensure secure, unobstructed access.
Occidental Leather 5066 Specifications
| Material | Premium full grain leather |
| Pockets & Tool Holders | 3 |
| Bit Holders | 2 |
| Design | Angled ergonomic |
| Tool Compatibility | Fits most cordless drills |
| Weight | 0.6 lbs |
| Handed Options | Right handed 5066; Left handed 5066LH |
| Origin | USA |
Occidental Leather 5040 Description
The Clip-on Hammer Holder combines a full-grain leather backer with a high-strength steel loop for reliable, fast access to your hammer. The spring steel clip snaps onto your belt without removing it, providing secure carry on the job.
Occidental Leather 5040 Includes
- (1) Hammer Holder
Occidental Leather 5040 Key Features
- Quality leather and steel construction for durability
- Clip-on design allows quick on and off installation
- Spring steel clip fits belts up to 2 in wide
- Heavy-duty steel loop accommodates most hammers
- Made in USA
Occidental Leather 5040 Applications
- Keep a hammer secured to your belt for fast access
- Ideal for framing, carpentry, and general construction
- Convenient tool carry when working on ladders or overhead
Occidental Leather 5040 Installation Overview
- Slide the spring clip onto your work belt.
- Confirm the clip is fully seated and secure.
- Place the hammer head through the steel loop.
- Position for comfortable reach and adjust as needed.
- Lift the clip to remove the holder when finished.
Occidental Leather 5040 Specifications
| Materials | Full-grain leather backing; high-strength steel loop |
| Clip Compatibility | Fits belts up to 2 in wide |
| Dimensions | Approx. 5 in H x 3.5 in W |
| Weight | Approx. 0.3 lb |
| UPC | 759244213409 |
| Country of Origin | USA |
Occidental Leather 5047 Description
Compact leather holster that keeps a utility knife, two pencils, and a tape measure close at hand without bulk. Doubles as a chalk line holder and fits work belts up to 3 inches. Ideal for small jobs and finish work. Made in USA.
Occidental Leather 5047 Includes
- (1) Holder
Occidental Leather 5047 Key Features
- Combo layout holds utility knife, two pencils, and a tape measure
- Accepts 35 ft tape or 25 ft FatMax; works as a chalk line holster
- Streamlined, lightweight design for finish work and tight spaces
- Rugged leather construction; riveted for durability
- Fits belts up to 3 inches wide; made in USA
Occidental Leather 5047 Applications
- Finish carpentry and punch list tasks
- Carrying tape, knife, and pencils for quick measurements and marking
- Chalk line holstering for layout work
- Streamlining tool access on compact belt setups
Occidental Leather 5047 Installation Overview
- Slide the holder onto a belt up to 3 inches wide.
- Seat the tape measure in the front pocket; remove the tape clip if needed for proper fit.
- Allow leather to break in for snug, secure seating.
- Insert utility knife and two pencils into their sleeves.
- Verify comfortable placement and retention before use.
Occidental Leather 5047 Specifications
| Material | Leather |
| Belt Compatibility | Fits up to 3 in belts |
| Tool Capacity | Utility knife, 2 pencils, 35 ft tape or 25 ft FatMax, chalk line |
| Pocket Count | 4 |
| Overall Size | 9 in x 4.5 in |
| Projection | 3 in |
| Weight | 0.3 lb (approx.) |
| Country of Origin | USA |
| UPC | 759244210606 |
| Model | 5047 |
Occidental Leather 9501 Description
The 9501 Clip-On Pouch is a modular fastener pouch that quickly adds storage or sub-divides larger bags. It clips securely to belts up to 2 inches wide and can also attach to toolboxes or bags for organized, ready-to-go setups. Compact and lightweight, it is ideal for task-specific workflows.
Occidental Leather 9501 Includes
- (1) Clip-On Pouch
Occidental Leather 9501 Key Features
- Cost efficient fastener management
- Single clip-on design for quick swaps between applications
- Keep multiple pouches preloaded and clipped to your toolbox or truck
- Adds fastener storage or sub divides existing main bags
- Secure steel clip fits belts up to 2 inches wide
- Made in USA
Occidental Leather 9501 Applications
- Add fastener capacity to any belt setup
- Sub-divide larger tool bags for better organization
- Preload pouches for task-specific jobs and swap quickly
- Clip to toolboxes or bags for mobile storage
- Use on belts up to 2 inches wide
Occidental Leather 9501 Installation Overview
- Load fasteners or small parts into the pouch.
- Position the steel clip over a belt up to 2 inches wide or onto a toolbox/bag edge.
- Press firmly to seat the clip securely.
- Arrange multiple preloaded pouches as needed for the task.
- Remove and swap pouches when changing applications.
Occidental Leather 9501 Specifications
| Dimensions | 5 in W x 4.5 in H |
| Weight | 0.2 lb |
| Material | Nylon |
| Belt Compatibility | Fits belts up to 2 in wide |
| UPC | 759244139709 |
| Country of Origin | USA |
Occidental Leather 9596 Description
All-leather Adjust-to-Fit electrician tool belt system engineered for efficiency and durability. The ergonomic belt fits pant waist sizes 32 to 40 and features hand-specific organization with NoSpill leather holders that mold to your tools. Made in USA.
Occidental Leather 9596 Includes
- (1) 9596 Adjust-to-Fit Pro Electrician Tool Belt Set
Occidental Leather 9596 Key Features
- All-leather construction built for commercial electricians
- Adjust-to-Fit belt fits 32 to 40 inch pant waists
- NoSpill leather holders help prevent tool drops
- Hand-specific layout for fast, efficient access
- Balanced design for all-day comfort
- Made in the USA
Occidental Leather 9596 Applications
- Electrical install and service tasks
- Rough-in and finish wiring work
- Panel, fixture, and device installation
- General jobsite tool and fastener organization
Occidental Leather 9596 Installation Overview
- Measure your current tool belt from the buckle end to the hole you use.
- Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
- Position pouches and holders for hand-specific access.
- Cinch belt to a comfortable, balanced fit and verify tool retention.
Occidental Leather 9596 Specifications
| Belt size | Adjustable, fits 32 to 40 inch pant waists |
| Material | All leather |
| Weight | 5.2 lb |
| Country of origin | USA |
| UPC | 759244308105 |
Occidental Leather 8583 Heritage FatLip Fastener Bag Description
A rugged fastener pouch built for durability and access. The 10 in deep main bag pairs industrial nylon with a full leather boot, while the distinctive FatLip leather mouth holds its shape, stays open, and resists abrasion. A patented 2-in-1 outer bag integrates an angle square holster, with added sleeves and loops for essential small tools.
Occidental Leather 8583 Includes
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8583 Key Features
- FatLip leather mouth keeps the bag open and protected
- Full leather boot for long-term durability
- Patented 2-in-1 outer bag with built-in angle square holster
- Tri-square sleeve, cat's paw loop, and external pouches for nail sets or driver bits
- Designed as the left-side fastener bag for right-handed setups; left-handed version available as 8583LH
- Made in USA
Occidental Leather 8583 Applications
- Framing and structural carpentry fastener storage
- Drywall and general construction small tool organization
- Quick-access holster for angle squares on the jobsite
- Left-side carry for right-handed belt systems
Occidental Leather 8583 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 10 in W x 10 in H |
| Outer Bag | 9 in W x 6 in H |
| Upper Bag | 5 in W x 4.5 in H |
| Weight | 1.7 lb |
| Material | Industrial nylon with leather FatLip mouth and full leather boot |
| UPC | 759244282009 |
| Country of Origin | USA |
| Color | Hunter Green |
Occidental Leather B5080DB LG Pro Framer Set Description
The Pro Leather Series is built from premium top grain cow hides treated with a blend of oils and waxes to withstand heavy outdoor use. This hand specific setup enhances workflow and durability with copper reinforced bags and a NoSpill tool holder system.
Occidental Leather B5080DB LG Includes
- (1) HD 3 in Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather B5080DB LG Features
- 22 pockets and tool holders
- Premium top grain leather construction
- Hand Specific tool holder placement for efficient workflow
- Copper rivets reinforce main bags
- NoSpill tool holder system
- Function engineered for modern builders
Occidental Leather B5080DB LG Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | Large |
| Weight | 5.3 lbs |
| Material | Leather |
| Color | Black, Tan |
Occidental Leather 5053 Description
Purpose built for electricians, this compact all-leather pocket caddy keeps essential tools organized for estimating, troubleshooting, trim out and service work. It provides five total pockets and holders, including an oversized slot for most compact test meters, and a snap loop to hang over belts up to 2 inches wide.
Occidental Leather 5053 Includes
- (1) Electrician's Pocket Caddy 5053
Occidental Leather 5053 Key Features
- Five pockets and tool holders in a compact layout
- Dedicated test meter pocket fits most compact testers
- Snap loop carry hangs over belts up to 2 inches wide or carry standalone
- All-leather, professional grade construction
- Made in USA
Occidental Leather 5053 Applications
- Estimating and inspections
- Troubleshooting and service calls
- Trim-out and finish electrical tasks
Occidental Leather 5053 Installation Overview
- Open snap loop and place over a belt up to 2 inches wide or carry by hand.
- Seat the caddy against the belt and close the snap securely.
- Load tools into the five pockets, placing the test meter in the larger pocket.
- Verify all tools are seated and the snap is fully engaged before use.
Occidental Leather 5053 Specifications
| Material | All-leather |
| Pockets and Holders | 5 |
| Belt Compatibility | Up to 2 in wide |
| Weight | 0.7 lb |
| UPC | 759244160505 |
| Country of Origin | USA |
| Model | 5053 |
Occidental Leather 5500 Electricians Tool Pouch Description
Compact, all leather electricians pouch with organized access to core tools. Features 15 pockets and holders including a flashlight loop, electrical tape chain, quick release tool snap, and heavy duty hammer holder. Tunnel loop mount fits belts up to 3 in. wide. Made in the USA.
Occidental Leather 5500 Includes
- (1) Electricians Tool Pouch
Occidental Leather 5500 Key Features
- All leather construction for durability
- 15 pockets and tool holders for everyday electrical tools
- Flashlight loop, electrical tape chain, and quick release tool snap
- Heavy duty hammer holder
- Tunnel loop mount fits belts up to 3 in. wide
- Made in USA
Occidental Leather 5500 Applications
- Daily electrical service and installation
- Organized belt carry for screwdrivers, pliers, and testers
- Maintenance and facility repair work
- Remodeling and jobsite troubleshooting
Occidental Leather 5500 Installation Overview
- Thread work belt through the tunnel loop; fits up to 3 in. width.
- Load core tools into dedicated pockets and sleeves.
- Attach small tools to the quick release snap as needed.
- Hang electrical tape rolls on the chain for quick access.
- Confirm balance and secure fit before use.
Occidental Leather 5500 Specifications
| Pocket Count | 15 |
| Main Bag Size | 6.5 in x 6 in |
| Material | Leather |
| Belt Fit | Tunnel loop fits belts up to 3 in wide |
| Weight | 1.2 lbs |
| Country of Origin | USA |
| UPC | 759244026900 |
Occidental Leather 5137 Description
The Extra Large Tape Holster rides high on the belt for easy reach and mobility. Built from premium leather and sized to fit popular 35 ft tape measures such as FatMax, it keeps your tape secure and accessible throughout the workday.
Occidental Leather 5137 Includes
- (1) Holster
Occidental Leather 5137 Key Features
- High mount belt design for better mobility
- Extra Large fit for 35 ft FatMax style tape measures
- Premium durable leather construction
- Fits belts up to 3 in wide
- Made in USA
Occidental Leather 5137 Applications
- Daily tape measure carry on tool belts
- Framing and layout tasks
- General carpentry and jobsite measuring
Occidental Leather 5137 Installation Overview
- Slide holster onto a belt up to 3 in wide and position at desired height.
- Insert tape measure into the holster with the base aligned to the cutout.
- Confirm secure fit and accessibility before use.
Occidental Leather 5137 Specifications
| Size | Extra Large |
| Compatibility | Fits 35 ft FatMax tape measures |
| Material | Leather |
| Belt Width | Up to 3 in |
| Weight | 0.3 lb |
| Country of Origin | USA |
| UPC | 759244222203 |
NOTE: Ensure belt width does not exceed 3 in for proper holster fit.
Occidental Leather 9540 Adjustable Finisher Description
Compact, lightweight finisher tool belt set built for trim, finish work, and light framing. Two-ply foam-core bags keep their shape and the Adjust-to-Fit design quickly adapts for seasonal layers. Hand-specific layouts promote workflow efficiency and D-rings come pre-installed for suspender use.
Includes
- (1) Belt Assembly
- (1) High Mount Hammer Holder
- (2) Oxy Tool Shield (Model 2003)
Key Features
- Hand-specific tool holders for efficient access
- Padded two-ply, foam-core bags maintain shape
- Abrasion-resistant industrial nylon construction
- Adjust-to-Fit belt allows quick sizing changes
- D-rings pre-installed for suspension system compatibility
- Left-handed model available as 9540LH
- Made in USA
Applications
- Finish carpentry setups
- Trim installation
- Light framing tasks
- General jobsite tool and fastener organization
Installation Overview
- Adjust belt to fit over typical work clothing.
- Position left fastener and right tool bags for reach preference.
- Attach the high mount hammer holder at the center back.
- Clip Oxy Tool Shields to bags or belt as needed.
- Load tools and fasteners evenly; connect suspenders to D-rings if used.
Specifications
| Pockets and Tool Holders | 23 |
| Waist Fit | Adjustable, 32 in to 41 in |
| Weight | 3.9 lb (approx.) |
| Material | Industrial nylon with foam-core bags; leather reinforcements |
| Color | Black nylon with brown leather |
| Hammer Holder | High Mount 5059 included |
| Tool Shields | (2) Model 2003 included |
| Made In | USA |
Occidental Leather 5036SM Description
Small Leather Pro Electrician Set built from premium top grain leather with a 12 oz belting leather belt and steel roller buckle. Features hand specific layout and the NoSpill tool holder system for secure, efficient access.
Occidental Leather 5036SM Includes
- (1) 5036SM Leather Pro Electrician Set
- (1) 5035 HD 3 in Ranger Work Belt
- (1) 6101 Pro Trimmer Fastener Bag
- (1) 5500 Electricians Tool Pouch
- (1) 5059 High Mount Hammer Holder
Occidental Leather 5036SM Key Features
- Premium top grain leather tool bags
- 12 oz belting leather belt with steel roller buckle
- NoSpill tool holder system keeps tools upright
- Hand specific organization engineered for electricians
- Made in USA
Occidental Leather 5036SM Applications
- Electrical install and service work
- Wire termination and panel assembly
- Commercial and residential troubleshooting
- Tool and fastener organization on the jobsite
Occidental Leather 5036SM Installation Overview
- Measure an existing work belt from buckle end to the most used hole to find belt size.
- Wear over normal work clothes and note the hole used for fastening.
- Select Small size if your measured midpoint is about 34 in.
- Assemble components on the belt in your preferred hand specific layout.
Occidental Leather 5036SM Specifications
| Material | Premium top grain leather |
| Belt material | 12 oz belting leather with steel roller buckle |
| Pockets and tool holders | 23 |
| Belt size | Small |
| Weight | 3.9 lbs |
| Components | 5035 belt, 6101 fastener bag, 5500 tool pouch, 5059 hammer holder |
| Handed option | Not available as left hand model |
NOTE: Size your belt by measuring an existing work belt, not your pants waist.
Occidental Leather 2006 Pocket Shield Description
Compact polypropylene insert designed to drop into any tool pocket or vest compartment to protect against sharp tools while keeping access smooth. Sized at 2 x 6 inches and made in the USA, it helps extend the life of your tool bags and vests.
Occidental Leather 2006 Includes
- (1) Pocket Shield
Occidental Leather 2006 Features
- Protects pouches and bags from knives, chisels, scribes and other sharp tools
- Rigid polypropylene provides smooth, snag free tool access
- Universal fit for most tool bags and vest pockets
- Lightweight and durable for daily jobsite use
- Made in the USA
Occidental Leather 2006 Applications
- Line tool pockets to prevent punctures from sharp tools
- Outfit work vests and pouches for better tool organization
- Extend lifespan of tool bags by adding internal protection
- Keep chisels and knives upright for faster retrieval
Occidental Leather 2006 Installation Overview
- Choose the pocket or pouch that holds sharp tools.
- Drop the Pocket Shield into the pocket with the curve matching the pocket shape.
- Seat it fully against the inner wall.
- Load tools; verify smooth insertion and removal.
- Reposition or replace the insert as it wears.
Occidental Leather 2006 Specifications
| Material | Polypropylene |
| Dimensions | 2 in W x 6 in H |
| Weight | 0.1 lb |
| Country of Origin | USA |
Occidental Leather 5545 Leather Nail Strip Holster Description
Belt worn holster designed to carry nail strips up to 16D for rapid reloads on the job. Built from heavy belting leather for long service life and dependable performance. Made in USA.
Occidental Leather 5545 Includes
- (1) Leather Nail Strip Holster
Occidental Leather 5545 Key Features
- Accepts nail strips up to 16D size
- Heavy belting leather construction
- Holds up to 8 racks
- Fits belts up to 3 inches wide
- Made in the USA
Occidental Leather 5545 Applications
- Keep nail strips at hand for faster nail gun reloads
- Organize collated nails while framing, roofing, or decking
- Reduce trips to refill fasteners on the jobsite
Occidental Leather 5545 Installation Overview
- Thread the holster onto your work belt (up to 3 inch width).
- Load collated nail strips into the pouch.
- Position for preferred hand access and begin work.
Occidental Leather 5545 Specifications
| Material | Heavy belting leather |
| Capacity | Holds up to 8 racks |
| Compatible Nails | Nail strips up to 16D |
| Fits Belt Width | Up to 3 inches |
| Weight | 0.5 lb |
| External Dimensions | 4.5 in W x 7 in H |
| Internal Dimensions | 3.75 in W x 6.75 in H |
| Country of Origin | USA |
| UPC | 759244177305 |
Occidental Leather 5592 Description
The 5592 Beltless Retro Tab Set lets owners of the 5055 Stronghold Suspension System go beltless while using traditional tool bags that accept a 3 inch belt. Build a custom, comfortable rig by hanging your existing bags from the suspension system.
Occidental Leather 5592 Includes
- (1) 5592 Beltless Retro Tab Set
Occidental Leather 5592 Features
- Go beltless with the 5055 Stronghold Suspension System
- Works with bags designed for a 3 inch belt
- Wide hangers provide stable bag support
- Made in USA
Occidental Leather 5592 Applications
- Convert a traditional belt rig to a beltless setup
- Customize tool bag layout for carpentry and construction
- Reduce waist bulk while maintaining bag capacity
- Integrate existing bags with a suspension system
Occidental Leather 5592 Installation Overview
- Attach the Retro Tabs to the 5055 Stronghold Suspension System per manufacturer guidance.
- Hang traditional bags that accept a 3 inch belt onto the tabs.
- Adjust suspension straps for balanced load and comfort.
- Verify all connections are secure before use.
Occidental Leather 5592 Specifications
| SKU | 5592 |
| GTIN | 759244157208 |
| Compatibility | For use with 5055 Stronghold Suspension System; fits bags that accept a 3 inch belt |
| Weight | 1.1 lb |
| Country of Manufacture | USA |
| Not Compatible | B5611, 5525 |
NOTE: Due to the extra wide hangers, this kit does not fit the B5611 or 5525 models.
Occidental Leather 5018 Description
Compact two-pouch professional leather tool bag designed for right-side wear. Includes a tape measure holster and organized holders for everyday tools like pencils, knife, crayon, chisel, torpedo level, and hammer.
Occidental Leather 5018 Includes
- (1) 5018 2 Pouch Pro Tool Bag with Tape Measure Pouch
Occidental Leather 5018 Key Features
- Right-hand layout with holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
- Integrated tape measure holster fits tapes up to 35 ft
- Durable full-grain leather construction
- Two main pouches for fast access and organization
- Available in a left-hand version (5018DBLH / 5018LH)
Occidental Leather 5018 Applications
- Carpentry and framing tool carry
- Finish work and trim installation
- General construction and remodeling
- Measuring, marking, and layout tasks
- Jobsite tool organization on a work belt
Occidental Leather 5018 Installation Overview
- Thread the bag onto a compatible work belt.
- Position on the right side for right-hand access.
- Load tools into designated holders and pouches.
- Place tape in the built-in holster.
- Verify balance and adjust placement for comfort.
Occidental Leather 5018 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag Size | 9 in x 8 in |
| Outer Bag Size | 5 in x 5.5 in |
| Material | Leather |
| Weight | 1.8 lb |
| Orientation | Right-hand wear |
Occidental Leather 5328 Description
Hand crafted from 10 oz Latigo belting leather, this large clip-on phone holster protects your device on the job. It secures with a heavy-duty spring steel belt clip and an Italian-style drop clasp, and fits iPhone Plus models and similarly sized phones.
Occidental Leather 5328 Includes
- (1) 5328 Phone Holster
Occidental Leather 5328 Key Features
- Made in the USA
- 10 oz Latigo belting leather construction
- Heavy-duty spring steel belt clip
- Italian-style drop clasp
- Clips to belts up to 2 inches wide
- Sized for larger smartphones (iPhone Plus and similar)
Occidental Leather 5328 Applications
- Keep smartphones secure and accessible on the jobsite
- Belt-mounted carry for larger phones
- Protection from bumps, dust, and debris
- Everyday use for trades and field work
Occidental Leather 5328 Installation Overview
- Attach the holster by clipping it to a belt up to 2 inches wide.
- Place the phone inside the holster.
- Close the drop clasp to secure the phone.
- Check that the clip is fully engaged before use.
Occidental Leather 5328 Specifications
| Material | 10 oz Latigo belting leather |
| Interior Dimensions | 7.0 in H x 3.25 in W x 0.75 in D |
| Belt Compatibility | Clips to belts up to 2 in wide |
| Closure | Italian-style drop clasp |
| Belt Clip | Heavy-duty spring steel |
| Weight | 0.458 lb |
| Country of Origin | USA |
Occidental Leather 5089 XXL Description
High-capacity seven bag framer setup built from premium top grain leather. Hand-specific layout with NoSpill tool holder system and copper rivet reinforcements for durability. XXL belt size with 23 pockets and tool holders.
Occidental Leather 5089 XXL Includes
- (1) 5035 HD 3 inch Ranger Work Belt
- (1) 5062 4 Pouch Pro Fastener Bag
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
- (1) 5012 Hammer Holder
Occidental Leather 5089 XXL Features
- Premium top grain leather construction
- Hand-specific tool holders for efficient workflow
- Copper rivet reinforcements on main bags
- NoSpill tool holder system for secure storage
- Function engineered for professional framers
- Available left-handed option: 5089LH
- Made in the USA
Occidental Leather 5089 XXL Applications
- Framing: organize and carry essential tools and fasteners
- General carpentry: keep hand tools accessible on site
- Jobsite setup: maximize capacity with seven pouch layout
- Heavy outdoor use: durable leather for demanding conditions
Occidental Leather 5089 XXL Installation Overview
- Measure from the end of your belt buckle to the hole you use to fasten.
- Select the belt size closest to that measurement; XXL is mid range 49 inches.
- Attach tool and fastener bags to the belt per your hand preference.
- Secure the hammer holder and adjust belt to the midpoint hole.
- Load tools and confirm comfortable, balanced fit.
Occidental Leather 5089 XXL Specifications
| Material | Premium top grain leather |
| Pouch Count | 7 |
| Pockets & Tool Holders | 23 |
| Belt Size | XXL |
| Midpoint Length | 49 inches |
| Weight | 5.6 lbs |
| Orientation | Right handed (left-handed available as 5089LH) |
| Components | 5035 Belt, 5062 Fastener Bag, 5018DB Tool Bag, 5012 Hammer Holder |
| Country of Manufacture | USA |
Occidental Leather 5525 Big Oxy Fastener Bag Description
Built for speed and durability, the Big Oxy Fastener Bag features a round-bottom design for added capacity and easy access to fasteners and layout tools. Purpose-built pockets organize a tri-square, cat's paw, bits, angle square, and more, with a tape pocket that fits up to a 35 ft tape. Includes an Oxy Tool Shield for safe storage of sharp tools. Made in the USA.
Occidental Leather 5525 Includes
- (1) 5525 Big Oxy Fastener Bag
- (1) Oxy Tool Shield
Occidental Leather 5525 Key Features
- Round-bottom design increases internal volume and stability
- 10 pockets and holders optimized for fasteners and layout tools
- Tape pocket fits tapes up to 35 ft
- Includes Oxy Tool Shield to protect sharp tools, bags, and body
- Right-hand layout; worn on the left side
- Premium leather construction; Made in the USA
Occidental Leather 5525 Applications
- Fastener storage for framing and carpentry tasks
- Organizing layout tools like squares and bits
- Measuring and marking with quick tape access
- Daily jobsite carry on a work belt
Occidental Leather 5525 Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for right-handed use.
- Insert the Oxy Tool Shield into the designated holder.
- Load fasteners and tools into the appropriate pockets.
- Confirm secure fit and balance before use.
Occidental Leather 5525 Specifications
| Pockets and Holders | 10 |
| Weight | 2.5 lbs |
| Main Bag | 11 in x 9 in |
| Outer Bag | 8.5 in x 6 in |
| Upper Bag | 4.5 in x 4.5 in |
| Tape Pocket Capacity | Up to 35 ft |
| Material | Leather |
| Handedness | Right-hand layout; worn left side |
| Country of Origin | USA |
Occidental Leather 5022 Description
Professional-grade knee protection made from top-grain leather. These pads feature dense cushioning with an inner plastic shield to reduce pressure points, and quick release fasteners for fast on and off. Non-marring leather is ideal for interior and remodeling work. Made in the USA.
Occidental Leather 5022 Includes
- (1) Pair of Knee Pads
Occidental Leather 5022 Key Features
- Top-grain leather construction for comfort and durability
- Non-marring surface helps prevent floor scuffs
- High-density padding with inner plastic shield minimizes pressure points
- Quick release fasteners for easy on and off
- Made in the USA
Occidental Leather 5022 Applications
- Interior remodeling and finish work
- Flooring installation without scuffing surfaces
- General jobsite knee protection
Occidental Leather 5022 Installation Overview
- Place pads over knees with curved edge down.
- Secure quick release buckles and straps.
- Adjust for snug, comfortable fit; avoid overtightening.
- Verify pads do not shift during movement.
Occidental Leather 5022 Specifications
| Brand | Occidental Leather |
| Model | 5022 |
| Material | Top-grain leather with inner plastic shield |
| Padding | High-density cushioning |
| Strap Type | Quick release buckle |
| Color | Brown |
| UPC | 759244086003 |
| Country of Origin | USA |
| Package Contents | 2 Leather Knee Pads |
Occidental Leather 8060 Description
The OxyLights 3 Pouch Fastener Bag is a lightweight, organized pouch designed for framing and general carpentry. It features dedicated holders for a 1" blade square, angle square, cat's paw, and driver bits, keeping fasteners and layout tools accessible on the left side.
Occidental Leather 8060 Includes
- (1) OxyLights 3 Pouch Fastener Bag
Occidental Leather 8060 Features
- 3-pouch layout for fasteners and small tools
- Tool-specific holders for blade square, angle square, cat's paw, and bits
- Lightweight OxyLights construction with leather reinforcements
- Optimized for framing and general carpentry
- Made in USA
Occidental Leather 8060 Applications
- Framing: Keep nails, layout square, and bits at hand
- General Carpentry: Organized storage for everyday fasteners
- Layout Work: Dedicated blade square and angle square holders
- Punch list tasks: Compact carry of small tools and hardware
Occidental Leather 8060 Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for right-handed setups or per preference.
- Load fasteners and layout tools into the main, outer, and upper pouches.
- Use dedicated holders for blade square, angle square, bits, and cat's paw.
- Check balance and retention before starting work.
Occidental Leather 8060 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.2 lbs |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Industrial nylon with leather reinforcements |
| Country of Origin | USA |
Occidental Leather 5026 Utility Rectangular Loop Description
The Utility Rectangular Loop is a simple, durable add on for tool belts that provides a quick attachment point for clip on tape measures, small clip on bags, meter cases and more. It fits work belts up to 3 inches wide and accepts clips up to 1 inch wide.
Occidental Leather 5026 Includes
- (1) Utility Rectangular Loop
Occidental Leather 5026 Key Features
- Quick clip point for tape measures, clip on pouches and meters
- Fits belts up to 3 inches; accepts clips up to 1 inch
- Leather loop with steel rectangular ring for durability
- Compact add on for any tool belt
- Made in USA
Occidental Leather 5026 Applications
- Attach tape measures to your belt
- Hang small clip on bags or meter cases
- Add an extra hook point to existing tool belts
- Organize frequently used clip on tools
Occidental Leather 5026 Installation Overview
- Slide the loop onto a work belt up to 3 inches wide.
- Position where convenient on your belt.
- Attach clip on tools or accessories with clips up to 1 inch wide.
Occidental Leather 5026 Specifications
| Compatible Belt Width | Up to 3 in |
| Accepts Clip Width | Up to 1 in |
| Material | Leather, Steel |
| Country of Origin | USA |
| Weight | 0.05 lb |
| UPC | 759244143706 |
| MFG Part | 5026 |
| Warranty | 2 Years |
Occidental Leather 5019 Description
A compact all-leather utility pouch with an open interior for versatile storage. Sized at 7.5 x 8 in and weighing 0.7 lb, it is ideal as a third bag on your rig for carrying loose fasteners or small tools. Made in USA.
Occidental Leather 5019 Includes
- (1) 5019 Pro Leather Utility Bag
Occidental Leather 5019 Features
- All-leather construction for durability
- Clean interior with no tool holders or dividers
- Compact size suited for fasteners and small tools
- Made in USA
- Riveted and stitched for strength
Occidental Leather 5019 Applications
- Carry loose fasteners on the job
- Store small hand tools or accessories
- Add-on third bag for tool belt systems
- General utility storage for carpentry or trade work
Occidental Leather 5019 Installation Overview
- Slide pouch onto compatible work belt or mount per your rig setup.
- Position for comfortable reach and balance.
- Load with fasteners or small tools; avoid overfilling.
- Check stitching and rivets periodically for wear.
Occidental Leather 5019 Specifications
| Material | All leather |
| Main Bag Size | 7.5 in W x 8 in H |
| Weight | 0.7 lb |
| Made In | USA |
| SKU | 5019 |
