Occidental Leather
Occidental Leather 5019 Tool Pouch
$54.90
Unit price perOccidental Leather 5019 Description
The Occidental Leather 5019 is a compact, all-leather utility pouch with a clean interior—no dividers or tool holders. Ideal as a versatile third bag on your rig for loose fasteners or small tools. Dimensions: 7.5″ W x 8″ H. Made in the USA.
Occidental Leather 5019 Includes
- (1) Occidental Leather 5019 Pro Leather Utility Bag (Tool Pouch)
Occidental Leather 5019 Key Features
- All-leather construction for durability and long service life
- Clean, open interior with no tool holders or dividers
- Compact size for carrying fasteners or small tools
- Lightweight at approximately 0.7 lb
- Belt-loop mount for easy placement on your work belt
- Made in the USA
Occidental Leather 5019 Applications
- Hold loose fasteners such as nails, screws, and anchors
- Carry small hand tools, bits, and accessories
- Add-on rear or side pouch to expand belt capacity
- Organize specialty hardware for trim, electrical, or punch-list work
Occidental Leather 5019 Installation Overview
- Confirm your belt width and choose a mounting position.
- Thread the work belt through the pouch’s loop.
- Orient and center the pouch for comfortable reach.
- Secure the belt and ensure the pouch hangs flat.
- Load with fasteners or small tools and check balance.
Occidental Leather 5019 Specifications
| Material | All-leather |
| Main Bag Size | 7.5″ W x 8″ H |
| Weight | 0.7 lb |
| Country of Manufacture | USA |
| Style | Pro Leather Utility Bag (Fastener Pouch) |
Occidental Leather 5019 Tool Pouch
Compact all-leather utility pouch 7.5 in x 8 in
✓ All-leather build for long-term durability
✓ Clean interior — no dividers or holders
✓ 7.5″ W x 8″ H main bag size
✓ Belt-loop mount for work belts
✓ Made in USA
$54.90
Unit price per4 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Leather Care & Maintenance
- Brush off jobsite grit daily and wipe down with a damp cloth when muddy.
- Occasionally shake out debris from inside the pouch.
- For deeper grime, wash with mild soap and water only—no bleach or harsh solvents—and allow to dry naturally.
- About once a year, clean with saddle soap or mild soap and warm water, then apply a small amount of non?oil?based leather conditioner (e.g., Rugged Service Cream).
- Store dry and out of direct sunlight.
- Avoid oil?based products; they can weaken stitching and shorten leather life.
- Always wipe off mud, concrete, or other drying compounds before they set to prevent oils from being drawn out of the leather.
- All-leather construction for rugged durability
- Open interior — no dividers or tool holders
- Compact capacity ideal for fasteners or small tools
- Lightweight: 0.7 lb
- Made in the USA
- Main Bag Size: 7.5″ W x 8″ H
- Style: Pro Leather Utility Bag (Fastener Pouch)
- Material: All-leather
More About Occidental Leather 5019 Tool Pouch
Occidental Leather 5019 Description
The Occidental Leather 5019 is a compact, all-leather utility pouch with a clean interior—no dividers or tool holders. Ideal as a versatile third bag on your rig for loose fasteners or small tools. Dimensions: 7.5″ W x 8″ H. Made in the USA.
Occidental Leather 5019 Includes
- (1) Occidental Leather 5019 Pro Leather Utility Bag (Tool Pouch)
Occidental Leather 5019 Key Features
- All-leather construction for durability and long service life
- Clean, open interior with no tool holders or dividers
- Compact size for carrying fasteners or small tools
- Lightweight at approximately 0.7 lb
- Belt-loop mount for easy placement on your work belt
- Made in the USA
Occidental Leather 5019 Applications
- Hold loose fasteners such as nails, screws, and anchors
- Carry small hand tools, bits, and accessories
- Add-on rear or side pouch to expand belt capacity
- Organize specialty hardware for trim, electrical, or punch-list work
Occidental Leather 5019 Installation Overview
- Confirm your belt width and choose a mounting position.
- Thread the work belt through the pouch’s loop.
- Orient and center the pouch for comfortable reach.
- Secure the belt and ensure the pouch hangs flat.
- Load with fasteners or small tools and check balance.
Occidental Leather 5019 Specifications
| Material | All-leather |
| Main Bag Size | 7.5″ W x 8″ H |
| Weight | 0.7 lb |
| Country of Manufacture | USA |
| Style | Pro Leather Utility Bag (Fastener Pouch) |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
