Sort by:
Occidental Leather 5527 Offset Snip Holster Description
Keep offset snips and pruning shears secure and close at hand. This full-grain leather holster fits popular offset metal snips such as Wiss M6/M7 and similar tools, accepts belts up to 3″ wide, and is proudly made in the USA.
Occidental Leather 5527 Includes
- (1) Offset Snip Holster
Occidental Leather 5527 Features
- Designed for offset metal snips (Wiss M6/M7) & pruning shears
- Full-grain American leather construction for durability
- Works with belts up to 3″ wide for stable carry
- Compatible with Oxy™ Tool Shield for added protection
- Made in the USA
Occidental Leather 5527 Applications
- Steel framing and sheet metal work
- General contracting and remodeling
- Landscaping and pruning tasks
- DIY projects requiring frequent snip use
Occidental Leather 5527 Installation Overview
- Slide holster onto a work belt up to 3″ wide.
- Seat the holster in your preferred position for easy reach.
- Insert offset snips or pruning shears into the pouch.
- Optionally add an Oxy™ Tool Shield for extra liner protection.
Occidental Leather 5527 Specifications
| Material | Full-grain American leather |
| Dimensions | 4″ W x 7.75″ H |
| Belt Compatibility | Up to 3″ wide |
| Weight | Approx. 0.3 lb (145 g) |
| Fits Tools | Offset snips (Wiss M6/M7) & pruning shears |
| Origin | Made in USA |
Occidental Leather 9511 Deep Clip-On Pouch Description
Fast, flexible fastener storage that clips on and goes. Slightly deeper and narrower than the 9501, this compact pouch keeps nails, screws, and small parts at the ready and can clip to belts up to 2" wide, a toolbox, or your truck for grab-and-go efficiency. Made in the USA.
Occidental Leather 9511 Includes
- (1) Deep Clip-On Pouch
Occidental Leather 9511 Features
- Cost-efficient fastener management
- Single clip-on design enables quick swaps between tasks
- Deeper, narrower profile than model 9501 for added capacity with a compact footprint
- Heavy-duty clip secures to belts up to 2" wide; also clips to toolboxes or truck interiors
- Quick-access storage for nails, screws, and small fasteners
- Made in the USA
Occidental Leather 9511 Applications
- Carry and organize nails, screws, and small hardware
- Create modular, swap-in/out fastener setups by task
- Clip-on storage for belts, toolboxes, or vehicle interiors
- General carpentry, framing, finish work, and DIY projects
Occidental Leather 9511 Installation Overview
- Attach the pouch clip to a work belt up to 2" wide or a secure edge on a toolbox/truck panel.
- Load with fasteners and ensure the pouch is seated and balanced.
- Verify the clip is fully engaged before use.
Occidental Leather 9511 Specifications
| Dimensions | 5" W x 6" H x 3" D |
| Belt Fit | Clips onto work belts up to 2" wide |
| Weight | 0.25 lbs |
| Made in | USA |
| GTIN | 759244224405 |
Occidental Leather B5625XXL Description
Professional all-leather framer’s rig in classic black with hand-specific bag layout and NoSpill tool holder system. Includes the HD 3″ Ranger Work Belt and matched fastener/tool bags engineered for quick access and long-term durability.
Occidental Leather B5625XXL Includes
- (1) B5625XXL Building Framer Tool Belt Set
- (1) Belt — 5035 HD 3″ Ranger Work Belt
- (2) Bags — B5611 Green Building Fastener Bag; B5612 Green Building Tool Bag
- (1) 5020 2-in-1 Tool & Hammer Holder
- (2) 2003 Oxy Tool Shields
Occidental Leather B5625XXL Key Features
- Lightweight 100% premium top-grain leather — no break-in required
- Hand-specific tool holders for natural workflow
- NoSpill holder system keeps tools secure
- Reinforced back walls at stress points for extended wear
- Side-by-side upper bag & tape mount for streamlined access
- Made in the USA
Occidental Leather B5625XXL Applications
- Framing carpentry setups requiring fast access to nails & tools
- General construction and remodel work
- Jobsite organization for levels, squares, chisels, and drivers
- Daily professional use where durability and balance are essential
Occidental Leather B5625XXL Installation Overview
- Measure an existing tool belt from buckle end to your most?used hole.
- Match that measurement to the size chart’s mid?range value.
- If no belt to measure, add 4" to your pant waist for an approximate mid?range.
- Adjust the belt to the midpoint hole; allow 4" of adjustment each side.
- Load tools into hand-specific holders and secure with NoSpill system.
Occidental Leather B5625XXL Specifications
| Material | Premium top-grain leather |
| Color | Black |
| Pockets & Tool Holders | 24 |
| Belt Size | XXL (Midpoint 49") |
| Weight | 5.7 lbs |
| Components | 5035 Belt; B5611 Fastener Bag; B5612 Tool Bag; 5020 Tool & Hammer Holder; (2) 2003 Oxy Tool Shields |
| Made In | USA |
NOTE: Size using belt measurements rather than pant waist for best fit.
Occidental Leather 5008SM Description
The Working Man’s Pant Belt is a 1.5" wide, extra heavy-duty bridle leather belt, edge-stitched for durability and finished with a heavy-duty steel roller buckle. Sized Small with precise measurements to ensure a reliable fit for daily workwear.
Occidental Leather 5008SM Includes
- (1) Occidental Leather 5008SM Pant Belt
Occidental Leather 5008SM Key Features
- Extra heavy-duty bridle leather, custom tanned in the USA
- Edge-stitched for quality, appearance & strength
- Heavy-duty steel roller buckle with nickel finish
- 1.5" belt width for everyday wear & tool carry
- Made in the USA
Occidental Leather 5008SM Applications
- Daily workwear belt for tradespeople
- Supports clip-on tool pouches & holsters
- General-duty pant belt for jobsite use
- Casual wear where rugged durability is preferred
Occidental Leather 5008SM Installation Overview
- Lay an existing belt flat; measure from buckle end to most-used hole.
- Choose the size closest to that measurement’s mid-range.
- If no belt to measure, add 4" to pant waist for an approximate mid-range.
- Fasten the buckle and test fit; adjust using the belt holes as needed.
Occidental Leather 5008SM Specifications
| Size | Small |
| Belt Width | 1.5" |
| Material | Bridle leather |
| Buckle | Steel roller, nickel finish |
| Mid Range | 34" |
| Approx. Pant Waist | 29" – 32" |
| Overall Length | 41.5" |
| UPC | 759244191400 |
Occidental Leather 1019 All Leather Shoulder Strap Description
Handcrafted all–leather shoulder strap designed as an optional carry solution for totes and tool bags. Built from bridle leather with an adjustable shoulder pad and swivel steel clips for quick attachment and smooth movement. The 1″ wide strap adjusts from 45″ to 57.5″ for a comfortable, customized fit. Made in the USA.
Includes
- (1) Leather Shoulder Strap
Key Features
- Optional strap for Journeyman’s Tote and compatible carry bags
- Hand crafted from durable bridle leather
- Adjustable shoulder pad for added comfort
- High–quality nickel–plated swivel steel clips for easy on/off
- 1″ wide strap adjusts 45″ – 57.5″
- Detaches in seconds for storage in your gear
- Made in the USA
Applications
- Shoulder carry upgrade for totes and tool bags
- Travel and everyday carry where a durable strap is needed
- Replacement strap for compatible Occidental Leather bags
Installation Overview
- Attach each swivel clip to the bag’s D–rings or strap anchors.
- Adjust the strap length between 45″ and 57.5″ to fit.
- Position the shoulder pad for comfort on the carry point.
- Verify clips are fully closed and secure before use.
- Detach clips to remove and store the strap when not in use.
Specifications
| Material | Bridle leather |
| Strap Width | 1″ |
| Adjustable Length | 45″ to 57.5″ |
| Hardware | Nickel–plated swivel steel clips |
| Country of Manufacture | USA |
Occidental Leather B5057 Black Pocket Caddy Description
Compact 4-pocket leather organizer that slips into your pocket or attaches to a belt to protect you, your tools, and your clothing while keeping essentials like pliers and screwdrivers within easy reach.
Includes
- (1) Caddy
Key Features
- Compact 4-pocket layout organizes small hand tools
- Fits in most pants pockets; protects tools and clothing
- Snap loop attaches to belts up to 2″ wide
- Durable leather construction for everyday use
- Great for small repairs, shop work, gardening, cabinetmaking, and farm maintenance
Applications
- Small repair and maintenance tasks
- Shop and bench work tool organization
- Gardening and outdoor upkeep
- Cabinetmaking and finish work
- Farm and field repairs
Installation Overview
- Load the pockets with frequently used small tools.
- Place the caddy in your pants pocket for quick access, or
- Use the snap loop to secure the caddy to a belt up to 2″ wide.
- Adjust tool placement for balance and comfort.
Specifications
| Pockets & Tool Holders | 4 |
| Dimensions | 6″ W x 10″ H |
| Color | Black |
| Material | Leather |
| Belt Compatibility | Snap loop fits belts up to 2″ wide |
| Weight | 0.6 lb |
| Made In | USA |
Occidental Leather 8068 Impact Gun and Drill Bag Description
Compact drill/screw gun storage designed for the right side. The main bag features two compartments — a dedicated holster for cordless drills or screw guns and a pouch for tools or quick-release clamps used in metal stud work. Includes a patented 2-in-1 outer pouch, holders for driver bits and pencil, a right-rear leather sleeve for Clip-On items, and a rafter square slot behind the outer pouch with a rear-facing square edge. Made in the USA.
Occidental Leather 8068 Includes
- (1) Impact / Screw Gun and Drill Bag
Occidental Leather 8068 Features
- Main bag with two compartments: holster plus tool/clamp pouch
- Right-side layout; holster fits cordless drills or screw guns
- Patented 2-in-1 outer pouch for flexible storage
- Driver bit and pencil holders
- Leather sleeve for Clip-On accessories
- Rafter square slot positioned behind outer pouch; square edge to rear
- Ideal for metal framing
- Made in the USA
Occidental Leather 8068 Applications
- Carry and protect cordless drills or screw guns on the job
- Organize driver bits, pencils, and small hand tools
- Hold quick-release clamps for metal stud work
- Keep a rafter square accessible while framing
- Add clip-on accessories via leather sleeve
Occidental Leather 8068 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.25 lbs |
| Orientation | Right side |
Occidental Leather B8017DBLH Description
The black OxyLights 3 Pouch Tool Bag in a left-handed layout delivers lightweight durability with smart organization. It includes dedicated holders for pencils, utility knife, chisels, level and lumber crayon, plus a heavy-duty hammer loop. Main bag corners are reinforced with signature OxyRed leather for long service life. Made in the USA.
Occidental Leather B8017DBLH Includes
- (1) B8017DBLH Left-Handed OxyLights 3 Pouch Tool Bag
Occidental Leather B8017DBLH Features
- Left-handed configuration — designed to be worn on the left side
- OxyRed leather reinforcement at high-wear corners
- Dedicated holders for chisel, knife, level, pencils and lumber crayon
- Heavy-duty hammer loop for quick access
- Lightweight nylon and leather hybrid construction
- Part of the OxyLights series
Occidental Leather B8017DBLH Applications
- Daily organization of hand tools for tradespeople
- Framing and general carpentry work
- Remodeling and jobsite maintenance tasks
- Finish work where compact storage is preferred
Occidental Leather B8017DBLH Installation Overview
- Slide the bag onto a compatible work belt through the leather tunnel.
- Wear on the left side for left-hand access.
- Load tools into the dedicated holders and pouches.
- Adjust belt position for balance and easy reach.
Occidental Leather B8017DBLH Specifications
| Pockets & Tool Holders | 10 |
| Main Tool Bag | 9" x 8" |
| Outer Bag | 5" x 5.5" |
| Material | Nylon & Leather Hybrid |
| Color | Black |
| Handedness | Left-handed layout |
| Weight | 1.3 lbs |
| Origin | Made in USA |
Occidental Leather 2580LH Description
Experience ultimate comfort with the Occidental Leather 2580LH Left Handed SuspendaVest OxyLight Package, featuring 36 pockets, adjustable straps, and even load distribution for belt-free carry across framing, electrical, concrete, and trim work.
Occidental Leather 2580LH Includes
- (1) Stronghold SuspendaVest (2500LH)
- (1) OxyLights Fastener Bag (B8064LH)
- (1) OxyLights 2 Pouch Tool Bag (B8017LH)
Occidental Leather 2580LH Features
- Maximum comfort with wide, padded shoulder support lined with Dri-Lex to wick away perspiration
- Fully adjustable straps for freedom of movement; one size fits most
- Even load distribution to reduce lower-back fatigue
- 36 total pockets & tool holders for quick, clutter-free access
- Quick-release chest buckle for fast on/off
- Heavy-duty rear "D" ring for hanging storage
- Quick disconnect 3" leather belting; accepts tunnel-loop bags up to 8.5" wide
- Belt-free system with removable bags for finish work or tight spaces
- Left-handed layout; right-handed version available as 2580
- Made in USA
Occidental Leather 2580LH Applications
- Framing crews seeking balanced carry & fast access
- Electrical work with distributed tool load
- Concrete forming and finishing tasks
- Trim/finish carpentry in tight spaces (bags removable)
Occidental Leather 2580LH Installation Overview
- Adjust shoulder and side straps for a centered, comfortable fit.
- Attach tool bags to the 3" leather belting via tunnel loops (up to 8.5").
- Distribute tools evenly across both sides to balance weight.
- Secure the chest buckle and confirm full range of motion.
- Use the rear D-ring for hanging storage when not in use.
Occidental Leather 2580LH Specifications
| Pockets & Tool Holders | 36 |
| Handedness | Left hand dominant |
| Fit | Fully adjustable; one size fits most |
| Weight | 5.7 lbs |
| Quick Release | Chest buckle |
| Storage | Heavy-duty D-ring |
| Compatibility | Accepts tunnel-loop bags up to 8.5" wide |
| Made In | USA |
| Right-Hand Option | 2580 |
Occidental Leather B5625XXL Description
Professional all-leather framer’s rig in classic black with hand-specific bag layout and NoSpill tool holder system. Includes the HD 3″ Ranger Work Belt and matched fastener/tool bags engineered for quick access and long-term durability.
Occidental Leather B5625XXL Includes
- (1) B5625XXL Building Framer Tool Belt Set
- (1) Belt — 5035 HD 3″ Ranger Work Belt
- (2) Bags — B5611 Green Building Fastener Bag; B5612 Green Building Tool Bag
- (1) 5020 2-in-1 Tool & Hammer Holder
- (2) 2003 Oxy Tool Shields
Occidental Leather B5625XXL Key Features
- Lightweight 100% premium top-grain leather — no break-in required
- Hand-specific tool holders for natural workflow
- NoSpill holder system keeps tools secure
- Reinforced back walls at stress points for extended wear
- Side-by-side upper bag & tape mount for streamlined access
- Made in the USA
Occidental Leather B5625XXL Applications
- Framing carpentry setups requiring fast access to nails & tools
- General construction and remodel work
- Jobsite organization for levels, squares, chisels, and drivers
- Daily professional use where durability and balance are essential
Occidental Leather B5625XXL Installation Overview
- Measure an existing tool belt from buckle end to your most?used hole.
- Match that measurement to the size chart’s mid?range value.
- If no belt to measure, add 4" to your pant waist for an approximate mid?range.
- Adjust the belt to the midpoint hole; allow 4" of adjustment each side.
- Load tools into hand-specific holders and secure with NoSpill system.
Occidental Leather B5625XXL Specifications
| Material | Premium top-grain leather |
| Color | Black |
| Pockets & Tool Holders | 24 |
| Belt Size | XXL (Midpoint 49") |
| Weight | 5.7 lbs |
| Components | 5035 Belt; B5611 Fastener Bag; B5612 Tool Bag; 5020 Tool & Hammer Holder; (2) 2003 Oxy Tool Shields |
| Made In | USA |
NOTE: Size using belt measurements rather than pant waist for best fit.
Occidental Leather 8584 Description
The Heritage FatLip Tool Bag is a 10" deep hybrid pouch built for durability and easy access. It features a full leather boot and a distinctive FatLip leather mouth that keeps the opening formed, open, and resistant to abrasion. Designed for dominant-hand tool access and available in a left-hand model (8584LH).
Occidental Leather 8584 Includes
- (1) Heritage FatLip Tool Bag (Occidental Leather 8584)
Occidental Leather 8584 Features
- 10" deep main bag with structured full leather boot
- FatLip leather-reinforced mouth holds shape & resists abrasion
- 13 pockets & tool holders for organized storage
- Right-side layout; left-hand version available as 8584LH
- Made in the USA
Occidental Leather 8584 Applications
- Framing and carpentry hand tool organization
- Daily jobsite access on dominant-hand side
- General construction and remodeling tool carry
Occidental Leather 8584 Installation Overview
- Slide the bag onto a compatible work belt via the leather tunnel.
- Place on your dominant-hand side (right for 8584; left for 8584LH).
- Load tools into interior leather sleeves and exterior pockets.
- Secure hammer and accessories in designated holders.
Occidental Leather 8584 Specifications
| Pockets & Tool Holders | 13 |
| Main Tool Bag | 10" W x 10" H |
| Outer Bag | 6.5" W x 5.5" H |
| Depth | 10" |
| Material | Full leather boot, FatLip leather mouth; heavy-duty fabric body |
| Weight | 1.9 lbs |
| Handedness | Right-hand (8584); Left-hand (8584LH) |
| Country of Manufacture | USA |
Occidental Leather 8585XL Description
Built for production carpenters, the 8585XL Extra Large Heritage FatLip tool belt set features 10″ deep bags with a full leather boot and a leather FatLip mouth that holds shape and resists abrasion. Hand-specific layouts, padded two-ply bags, and abrasion-resistant industrial nylon with leather reinforcements deliver durable, organized access on the job. Includes a heavy-duty 3″ Ranger work belt and center 2-in-1 tool & hammer holder. Made in the USA.
Occidental Leather 8585XL Includes
- (1) 8585XL FatLip Tool Bag Set
- (1) 5035 HD 3″ Ranger Work Belt
- (1) 8583 FatLip Fastener Bag
- (1) 8584 FatLip Tool Bag
- (1) 5020 2-in-1 Tool & Hammer Holder
Occidental Leather 8585XL Features
- Hand-specific tool holders for efficient workflow
- Padded two-ply bags keep their shape when empty or loaded
- Extremely abrasion-resistant industrial nylon with leather reinforcements
- FatLip leather mouth stays open & protects against wear
- Full leather boot for rugged durability
- 3″ HD Ranger Belt for comfort and stability
- Available left-handed as 8585LH
- Made in the USA
Occidental Leather 8585XL Applications
- Framing and production carpentry
- General construction and remodeling
- Organized storage of tools and fasteners on site
Occidental Leather 8585XL Installation Overview
- Measure an existing tool belt from buckle end to your most-used hole to find size.
- Select Extra Large if the midpoint is about 45″ (approx. pant waist 40″–44″).
- Place the tool bag on your dominant side and the fastener bag on the opposite side.
- Buckle and adjust the 3″ Ranger Belt over typical work clothing for a secure fit.
Occidental Leather 8585XL Specifications
| Pockets & Tool Holders | 25 |
| Belt Size | Extra Large |
| Bag Depth | 10 in. |
| Materials | Full leather base with abrasion-resistant industrial nylon |
| Belt Width | 3 in. HD Ranger Belt |
| Total Weight | 5.2 lb |
| Handedness Options | Right-handed; Left-handed available as 8585LH |
| Color (8585 Series) | Hunter Green |
| Country of Origin | USA |
Occidental Leather 9521LH Description
The 9521LH Left Handed Oxy Finisher Tool Bag is built for trim, light framing, and finish work. Its compact, round-bottom design with two-ply foam-core construction keeps its shape whether empty or loaded and provides organized carry for left-handed users.
Occidental Leather 9521LH Includes
- (1) Occidental Leather 9521LH Left Handed Oxy Finisher Tool Bag
- (1) 2003 Oxy Tool Shield
Occidental Leather 9521LH Features
- Compact bag layout ideal for trim, light framing, and finish tasks
- Round-bottom, full-capacity main and outer bags maintain shape when empty or full
- Clip-on leather tab for tape/upper bag accessories; driver bit or nail set pouches included
- Steel hammer holder
- Left-handed orientation — worn on the left side for tools accessed with the left hand
- Includes Oxy Tool Shield for sharp tool protection
- Made in USA
Occidental Leather 9521LH Applications
- Trim installation and cabinetry
- Light framing tasks
- Finish carpentry and punch-list work
Occidental Leather 9521LH Installation Overview
- Attach the bag to your work belt.
- Wear on the left side for left-hand access.
- Insert the included Oxy Tool Shield into the inner sleeve for chisels/knives.
- Use the clip-on leather tab for tape or accessory pouches.
- Load tools into the 12 pockets and secure hammer in the steel loop.
Occidental Leather 9521LH Specifications
| Pockets & Tool Holders | 12 |
| Main Bag | 9.5" x 7.5" |
| Outer Bag | 6.5" x 5.5" |
| Orientation | Left Handed |
| Material | Two-ply foam-core construction with nylon and leather components |
| Includes | 2003 Oxy Tool Shield |
| Made In | USA |
Occidental Leather B8017DB Description
The Black OxyLights 3 Pouch Tool Bag keeps essential tools organized and close at hand. Holders for pencils, work knife, chisel, level, and lumber crayon are built in, plus a heavy-duty hammer loop. Main bag corners are reinforced with signature OxyRed leather. Right-hand layout; left-hand version available (B8017DBLH). Made in USA.
Occidental Leather B8017DB Includes
- (1) B8017DB Black OxyLights 3 Pouch Tool Bag
Occidental Leather B8017DB Features
- 3-pouch layout for compact, everyday organization
- Reinforced main bag corners with OxyRed leather
- Dedicated holders for chisel, knife, level, pencils, and lumber crayon
- Heavy-duty hammer loop
- Lightweight nylon & leather hybrid construction
- Right-hand configuration; left-hand model available (B8017DBLH)
- Made in USA
Occidental Leather B8017DB Applications
- Daily tool organization for tradespeople
- Framing and general carpentry tasks
- Remodeling and jobsite maintenance
- Finish work where compact storage is preferred
Occidental Leather B8017DB Installation Overview
- Slide the bag onto a compatible work belt through the leather tunnel.
- Position on the right side for right-hand use.
- Load tools into the dedicated holders and pouches.
- Check balance and access; adjust position as needed.
Occidental Leather B8017DB Specifications
| Pockets & Tool Holders | 10 |
| Main Tool Bag | 9" x 8" |
| Outer Bag | 5" x 5.5" |
| Material | Nylon & leather hybrid |
| Color | Black |
| Handedness | Right-hand layout (Left-hand available: B8017DBLH) |
| Weight | 1.3 lbs |
| Origin | Made in USA |
Occidental Leather 2575LH Left Handed Oxy Pro Work Vest
Tool & fastener organization in a vest — no belt, no bags. The left-handed Oxy Pro Work Vest delivers maximum comfort with even weight distribution, wide shoulders, and an open-back design for airflow. It offers intuitive storage for tape, speed square, pencils, gloves, notebook, torpedo level, and more, with stress points, edges, and pockets reinforced with nylon for durability. Equipped with two Oxy Tool Shields to protect sharp tools and clip onto any bag or pants pocket.
Includes
- (1) Occidental Leather 2575LH Oxy Pro Work Vest (Left Handed)
- (2) 2003 Oxy Tool Shield
Key Features
- Maximum comfort with ergonomic, even load distribution
- Freedom of movement with wide-shoulder, open-back design
- Functional organization with 28 pockets & tool holders
- Nylon-reinforced stress points for long-term durability
- Includes two Oxy Tool Shields for knives, chisels, pliers, etc.
Applications
- General carpentry and framing
- Remodeling & finish work
- Electrical, HVAC, and service trades
- Jobsite tool organization without a traditional belt
Installation Overview
- Adjust vest straps for a balanced, comfortable fit.
- Clip the Oxy Tool Shields where desired for sharp tool protection.
- Organize tools in designated pockets and holders.
- Verify load is evenly distributed and fine-tune strap adjustments.
Specifications
| Pockets & Tool Holders | 28 |
| Size | One size fits most |
| Hand | Left-handed layout (wear on right side) |
| Right-Handed Version | 2575 |
Occidental Leather 5017DBLH Description
The 5017DBLH Left Handed 3 Pouch Pro Tool Bag organizes essential tools with a left-hand layout and 10 total pockets and holders. Double outer pouches and dedicated holders keep your hammer, pencils, knife, chisel, level and more within easy reach.
Occidental Leather 5017DBLH Includes
- (1) Left Handed 3 Pouch Pro Tool Bag
Occidental Leather 5017DBLH Features
- Popular 3-pouch pro design — same layout as 5018DBLH without a tape pocket
- Double outer bags for added fastener and small tool capacity
- Dedicated holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
- Left-handed configuration — worn on the left side for dominant-hand access
Occidental Leather 5017DBLH Applications
- Daily tool organization for carpentry and framing tasks
- Keeping layout tools and small hand tools quickly accessible
- Left-handed tradespeople needing an ergonomically oriented bag
Occidental Leather 5017DBLH Installation Overview
- Slide the bag’s belt tunnel onto a compatible work belt.
- Position on the left side for left-handed use.
- Load tools into dedicated holders and pouches; check balance and adjust position as needed.
Occidental Leather 5017DBLH Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" x 8" |
| Outer Bag | 5" x 5.5" |
| Handedness | Left |
Occidental Leather 5058M Description
A quality 6.5 oz, 100% cotton, oversized loose-fit T-shirt featuring the iconic Oxy logo. Made in California, USA. Medium size.
Occidental Leather 5058M Includes
- (1) T-Shirt
Occidental Leather 5058M Features
- 100% cotton construction for everyday comfort
- Oversized loose fit for relaxed wear
- Front chest Oxy logo and large back graphic
- Made in California, USA
- Available colors: Black, Grey, Natural, Safety Green
Occidental Leather 5058M Applications
- Jobsite apparel and brand representation
- Casual everyday wear
- Shop & workshop clothing
- Event & crew merch
Occidental Leather 5058M Installation Overview
- Select preferred color and confirm size Medium.
- Wear as a comfortable base layer or standalone shirt.
- Machine wash per care instructions to maintain fabric and print.
Occidental Leather 5058M Specifications
| Material | 100% Cotton |
| Fabric Weight | 6.5 oz |
| Fit | Oversized loose fit |
| Size | Medium |
| Made In | California, USA |
| Weight | 191 g (approx.) |
| UPC | 759244008500 |
| Colors | Black, Grey, Natural, Safety Green |
Occidental Leather 8071XL Description
Extra-long replacement back strap designed exclusively for the 5592 Beltless™ Retro Kit. Provides additional reach compared to the standard 8071 to improve comfort and range of motion.
Occidental Leather 8071XL Includes
- (1) Strap
Occidental Leather 8071XL Key Features
- Extra Long back strap for 5592 Beltless™ Retro Kit
- 6" longer than the 8071
- Heavy-duty construction
- Made in USA
Occidental Leather 8071XL Applications
- Replace or upgrade the back strap on the 5592 Beltless™ Retro Kit
- Extend fit for larger frames or layered clothing
- Increase bag swing and mobility on beltless setups
Occidental Leather 8071XL Installation Overview
- Remove the standard back strap from the 5592 Beltless™ Retro Kit.
- Attach the 8071XL to the existing connection points.
- Adjust the strap length for preferred fit and movement.
- Confirm secure attachment before use.
Occidental Leather 8071XL Specifications
| Compatibility | 5592 Beltless™ Retro Kit |
| Length Difference | 6" longer than 8071 |
| UPC | 759244166309 |
| Weight | 0.31 lb (approx.) |
| SKU | 8071XL |
Occidental Leather 8017 Description
The Occidental Leather 8017 OxyLights 2-Pouch Tool Bag provides streamlined, right-side access to everyday tools with 9 total pockets and holders. Modeled after the 8018 but without the tape pocket, it organizes essentials like a work knife, pencils, chisels, torpedo level, and hammer while keeping weight low — ideal for professional carpentry and framing.
Occidental Leather 8017 Includes
- (1) OxyLights 2-Pouch Tool Bag (Model 8017)
Occidental Leather 8017 Features
- Streamlined 2-pouch layout for compact, efficient carry
- 9 total pockets & holders for key hand tools and layout gear
- No tape pocket for a lighter, focused setup
- Right-side wear for quick right-hand access
- Made in the USA
Occidental Leather 8017 Applications
- General carpentry — carry daily-use hand tools
- Framing tasks — fast access to knife, chisel, and hammer
- Layout work — organize pencils, lumber crayon, and torpedo level
- Jobsite punch lists — compact kit for quick fixes
Occidental Leather 8017 Installation Overview
- Thread the bag onto your work belt through the back slot.
- Position on the right side for right-hand tool access.
- Load essential tools into the main and outer pouches; place knife, chisel, and pencils in dedicated holders.
- Check balance and adjust belt position for comfort.
Occidental Leather 8017 Specifications
| Pockets & Holders | 9 |
| Main Bag | 9" W x 8" H |
| Outer Bag | 6.5" W x 5.5" H |
| Layout | 2-pouch, right-side wear |
| Weight | 1.2 lbs |
| Origin | Made in USA |
Occidental Leather B8064LH Left Handed OxyLights Fastener Bag with Double Outer Bag
$129.90
Unit price perOccidental Leather B8064LH Left Handed OxyLights Fastener Bag with Double Outer Bag
$129.90
Unit price perOccidental Leather B8064LH Description
Left-handed OxyLights fastener bag featuring a compact 4-bag layout and a patented 2-in-1 outer pouch with angle square holster. Designed to be worn on the right side, it organizes nails, bits, tri-square and more with 10 total pockets/tool holders.
Occidental Leather B8064LH Includes
- (1) B8064LH Left Handed OxyLights Fastener Bag
Occidental Leather B8064LH Features
- Patented 2-in-1 outer pouch with built-in angle square holster
- Dedicated sleeves/loops for tri-square, cat’s paw, nail sets and driver bits
- Left-handed layout — worn on right side for fast access
- Lightweight OxyLights design for all-day comfort
- Made in USA
Occidental Leather B8064LH Applications
- Framing and general carpentry fastener organization
- Keeping layout tools (angle square, tri-square) readily accessible
- Storing small tools and driver bits on the jobsite
Occidental Leather B8064LH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the right side for left-handed setups.
- Load fasteners and tools into the main, outer and upper pouches.
- Use dedicated sleeves/loops for squares, cat’s paw and bits.
Occidental Leather B8064LH Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Color | Black |
| Handedness | Left-handed (wear on right side) |
| Material | Nylon |
Occidental Leather 5080DB Pro Framer Set Description
Built for professional framers, this premium top?grain leather system features hand?specific bag layout, copper?riveted stress points, and the NoSpill tool holder system for secure, efficient carry. Designed for long-term outdoor use and balanced comfort.
Occidental Leather 5080DB Includes
- (1) Work belt
- (2) Pro Framer bags
- (1) Hammer holder
Occidental Leather 5080DB Features
- Premium top?grain leather for weather?resistant durability
- Hand?specific tool layout to maintain work rhythm
- Copper?riveted stress points on main bags
- NoSpill tool holder system keeps tools secure
- Function?engineered setup for modern builders
- Left?handed version available (5080DBLH)
Occidental Leather 5080DB Applications
- Framing and general carpentry
- Jobsite fastening, layout, and measuring
- Organized carry of hand tools, nails, and fasteners
Occidental Leather 5080DB Installation Overview
- Measure an existing tool belt from buckle end to your most?used hole to find size.
- Select the belt size closest to that midpoint measurement (or add ~4" to pant size if no belt).
- Place tool bag on dominant hand side; fastener bag on opposite side.
- Adjust belt for comfort and even weight distribution.
Occidental Leather 5080DB Specifications
| Material | Premium top?grain leather |
| Pockets & Tool Holders | 22 |
| Belt Size (variant shown) | Small |
| Weight | Approx. 5.4 lb |
| Made In | USA |
Occidental Leather 5191XL Description
The Pro Carpenter’s 5 Bag one-piece buscadero tool belt system delivers balanced load distribution, durability, and all?day comfort. Built from premium top?grain leather with a sheepskin?lined interior, hand-specific holders, and the NoSpill tool holder system, this Extra Large setup provides organized access to tools with 22 total pockets & holders. Made in the USA.
Occidental Leather 5191XL Includes
- (1) Belt Assembly
Occidental Leather 5191XL Key Features
- Unique one-piece buscadero belt design for even weight distribution
- Premium top?grain leather with copper?riveted stress points
- Hand?specific tool holders with NoSpill tool holder system
- Sheepskin?lined interior for enhanced comfort
- Function?engineered layout based on 5060 fastener bag & 5018 tool bag
- Made in USA
- Not available as a left?hand model (suggest 9550LH)
Occidental Leather 5191XL Applications
- Framing and general carpentry tool carry
- Remodeling and residential construction
- Jobsite organization for fasteners, hand tools, and layout gear
- Pro-grade daily wear where comfort and durability are critical
Occidental Leather 5191XL Installation Overview
- Put on the belt over your typical work clothing and note the hole you use.
- Remove the belt and measure from the end of the buckle to the used hole.
- Select the size whose mid?range matches your measurement; belts allow about 4" of adjustment each way.
- If between sizes, choose the larger size for best fit.
Occidental Leather 5191XL Specifications
| Pockets & Tool Holders | 22 |
| Size | Extra Large |
| Material | Premium top?grain leather |
| Belt Style | One?piece buscadero |
| Lining | Sheepskin |
| Made In | USA |
Occidental Leather 5087SM Small Framing Set Description
All-leather framing rig with a hand-specific layout that places the tape holder on the left side. Built from premium top-grain leather with copper-riveted stress points and the NoSpill tool holder system, this Pro Leather set delivers durable, organized storage for demanding outdoor use.
Occidental Leather 5087SM Includes
- (1) Belt
- (2) Bags
- (1) Hammer Holder
Occidental Leather 5087SM Features
- Premium top-grain leather with oil & wax tanning for outdoor performance
- Hand-specific tool layout; tape holder on the left
- Copper rivet reinforcement at main bags
- NoSpill tool holder system keeps tools secure
- Function-engineered design for professional builders
- Available left-handed layout option: 5087LH
Occidental Leather 5087SM Applications
- Framing and rough carpentry
- General carpentry tool and fastener organization
- Jobsite use in outdoor conditions
- Right-handed users preferring tape on left side
- Left-handed setup available for opposite layout
Occidental Leather 5087SM Installation Overview
- Lay your current tool belt flat and measure from buckle end to your most-used hole.
- Select the size closest to that midpoint measurement (Small is 34″ mid range).
- If no belt is available, add 4″ to your pant waist for an approximate mid range.
- Adjust the belt on the midpoint hole; fine-tune using the remaining holes.
- Arrange tool and fastener bags per your dominant hand preference.
Occidental Leather 5087SM Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | Small (34″ mid range; approx. 29″–32″ pant waist; 41.5″ overall length) |
| Material | Premium top-grain leather |
| Layout | Tape holder on left; hand-specific |
| Made In | USA |
Occidental Leather 5063 Description
A beltless fastener-side pouch designed for organized access. This model features a three-pouch layout with dedicated sleeves for layout tools and small hand tools, offering 9 total pockets/tool holders for efficient left-side carry.
Occidental Leather 5063 Includes
- (1) Beltless Fastener Bag
Occidental Leather 5063 Key Features
- Three-pouch layout for fastener and tool organization
- Left-side fastener bag for commonly accessed tools
- Beltless compatible — works with Occidental’s Stronghold Beltless System
- 9 pockets/tool holders for ample storage
- Durable leather construction with reinforced rivets and stitching
- Integrated sleeves/holders for layout tools and small hand tools
Occidental Leather 5063 Applications
- Carrying and sorting fasteners on the left side
- Keeping layout tools (angle square, driver bits) readily accessible
- Beltless setups for framers, carpenters, and finishers
- Streamlined mobile work where a full belt is not required
Occidental Leather 5063 Installation Overview
- Attach the bag to your compatible beltless rig or attachment points per system instructions.
- Position on the left side for fastener/tool access.
- Load fasteners and layout tools into the main, middle, and outer compartments.
- Confirm secure attachment before use.
Occidental Leather 5063 Specifications
| Pockets & Tool Holders | 9 |
| Main Bag | 9" W x 8" H |
| Middle Bag | 7" W x 6" H |
| Outer Bag | 6" W x 5.5" H |
| Compatibility | Occidental Stronghold Beltless System |
| Construction | Leather |
| Orientation | Left-side fastener bag |
| Made In | USA |
Occidental Leather 8071 Beltless Back Strap Description
Upgrade your tool carrying with the Occidental Leather 8071 Beltless Back Strap, designed exclusively for the 5592 Beltless™ Retro Kit. Durable, adjustable webbing with leather keepers helps stabilize beltless systems for all-day comfort.
Occidental Leather 8071 Includes
- (1) Strap
Occidental Leather 8071 Key Features
- Back strap designed ONLY for the 5592 Beltless™ Retro Kit
- Heavy-duty, contractor-grade construction
- Adjustable buckle for quick fit tuning
- Leather keeper loops with snap hardware
- Made in USA
Occidental Leather 8071 Applications
- Replacement back strap for the 5592 Beltless™ Retro Kit
- Stabilizes beltless tool bag systems
- Enhances carrying comfort during long wear
- Keeps bags positioned for better accessibility
Occidental Leather 8071 Installation Overview
- Attach the strap to the 5592 Beltless™ Retro Kit connection points.
- Thread through the buckle and set desired length.
- Secure leather keepers/snaps and check all hardware engagement.
- Test fit and re-adjust for comfort and stability.
Occidental Leather 8071 Specifications
| Compatible Kit | 5592 Beltless™ Retro Kit |
| Size | Medium–Large |
| Weight | 0.26 lb |
| UPC | 759244145502 |
| Country of Origin | USA |
Occidental Leather 8585M Description
Built for production carpenters, the Heritage FatLip Tool Belt Set features 10″ deep, hand-specific pouches with a full leather boot and the distinctive FatLip leather-reinforced mouth that stays open & resists abrasion. Exterior is rugged industrial nylon with padded two-ply foam core to help bags keep their shape. Includes the heavy-duty 3″ HD Ranger belt and rear 2-in-1 Tool & Hammer Holder. Made in the USA. Left-handed setup available as 8585LH.
Occidental Leather 8585M Includes
- (1) Belt
- (2) Bags
- (1) Hammer Holder
Occidental Leather 8585M Features
- Hand-specific tool holder layout for efficient workflow
- Padded two-ply tool bags maintain shape
- Extremely abrasion-resistant industrial nylon exterior
- Leather tool holders & corner reinforcement
- FatLip leather mouth keeps bag formed & open
- Full leather boot for durability
- 3″ HD Ranger work belt for comfort & stability
- Rear 2-in-1 Tool & Hammer Holder
- Available for left-handed builders as 8585LH
Occidental Leather 8585M Applications
- Production carpentry needing quick access & organization
- Framing tasks with mixed fasteners & common hand tools
- General construction and jobsite tool carry
Occidental Leather 8585M Installation Overview
- Measure from the end of your buckle to the hole you use on your current tool belt.
- Choose the size closest to that midpoint measurement (Medium — 37″).
- Place the tool bag on your dominant-hand side and the fastener bag opposite; adjust belt for a secure fit.
Occidental Leather 8585M Specifications
| Pockets & Tool Holders | 25 |
| Belt Size | Medium |
| Bag Depth | 10 in. |
| Material | Full leather base with nylon exterior |
| Belt Width | 3 in. HD Ranger Belt |
| Weight | 5.2 lbs |
| Color | Hunter Green |
| Made In | USA |
| Components | 8583 Fastener Bag, 8584 Tool Bag, 5020 2-in-1 Tool & Hammer Holder, 5035 HD 3″ Ranger Work Belt |
| Size Mid Range | 37″ (Medium) |
| Approx. Pant Waist | 33″ – 35″ |
| Overall Length | 44.5″ |
Occidental Leather B8554 Description
Stay fast, light, and organized with the Oxy Pro Pouch. This Tall, Black pouch features a 2 in. belt clip for quick on/off, a drawstring top to secure contents, and rugged dual-layer construction — 1000D nylon sides with a 1050D nylon bottom. Sized at 5 in. diameter x 8.5 in. tall, it is built for demanding jobsites and proudly made in the USA.
Occidental Leather B8554 Includes
- (1) Oxy Pro Pouch, Tall - Black
Occidental Leather B8554 Features
- 2 in. steel clip for rapid attachment to belts or waistbands
- Drawstring closure keeps fasteners and parts contained
- Dual-layer nylon build: 1000D sides with a 1050D bottom for durability
- Tall size capacity: 5 in. diameter x 8.5 in. high
- Clips to most 2 in. wide belts
- Made in the USA
Occidental Leather B8554 Applications
- Carry nails, screws, and small hardware
- Keep drill bits and small tools within reach
- Hold shims and layout accessories
- Clip-on storage for belts, vests, or waistbands up to 2 in.
- Jobsite organization for carpentry, framing, and finish work
Occidental Leather B8554 Installation Overview
- Slide the 2 in. clip over your belt or waistband.
- Load fasteners or small tools into the pouch.
- Cinch the drawstring to secure contents.
- Adjust position on belt for preferred access.
Occidental Leather B8554 Specifications
| Size | Tall |
| Color | Black |
| Dimensions | 5 in. diameter x 8.5 in. tall |
| Material | Dual-layer nylon: 1000D sides, 1050D bottom |
| Closure | Drawstring |
| Clip | 2 in. steel belt clip |
| Belt Compatibility | Most belts/waistbands up to 2 in. wide |
| Weight | 0.3 lb |
| Made In | USA |
Occidental Leather 5135 LG Stronghold Belt System Description
Handcrafted in the USA, this premium 5″ work belt combines 12–14 oz OX Red Latigo leather with a sweat‑wicking wool liner for all‑day comfort and support. A 2″ all‑leather overbelt and robust belt loops keep tool bags secure, while nickel‑plated steel buckles and suspender loops add durability and versatility.
Includes
- (1) Tool Belt
Key Features
- Wide 5″ belt for enhanced back support
- Built‑in suspender attachment loops
- Thick padded wool liner for comfort & moisture wicking
- 2″ all‑leather overbelt with heavy duty loops to minimize bag sliding
- Nickel‑plated steel buckles
- Edge stitching on leather for added strength
- Made in USA
Applications
- Supportive base belt for carpenter and contractor tool rigs
- Comfort upgrade for long days carrying loaded tool bags
- Secure attachment of fastener & tool bags with overbelt
- Compatible with suspenders for improved load distribution
- General construction, framing, finish work
Installation Overview
- Measure your current tool belt from buckle end to the hole used to determine size.
- Select the Large size and adjust to midpoint hole for optimal fit.
- Attach tool bags to the 2″ overbelt and position loops to prevent sliding.
- Fasten the nickel‑plated buckle and check suspender loop placement.
- Confirm comfortable fit over typical work clothing.
Specifications
| Size | Large |
| Belt Width | 5″ |
| Overbelt Width | 2″ |
| Liner | Padded wool (moisture‑wicking) |
| Material | 12–14 oz Latigo leather |
| Hardware | Nickel‑plated steel buckles |
| Color | OxyRed / Brown, Tan |
| Weight | 5.4 lbs |
| Country of Manufacture | USA |
Occidental Leather 5135 XXL Description
Handcrafted in the USA from 12–14 oz OxyRed Latigo leather with a sweat-wicking wool liner, the Stronghold Belt System delivers all-day comfort and support. The 5” wide belt features a 2” all-leather overbelt and heavy-duty loops to keep tool bags secure, with nickel-plated steel buckles and built-in suspender attachment loops. Edge stitching adds durability and a clean finish.
Occidental Leather 5135 XXL Includes
- (1) Tool Belt
Occidental Leather 5135 XXL Key Features
- Wide 5” belt provides enhanced back support
- Padded wool liner for moisture-wicking comfort
- 2” all-leather overbelt keeps tool bags from sliding
- Nickel-plated steel buckles and hardware
- Built-in suspender attachment loops
- Edge-stitched leather for added strength
- Made in the USA
Occidental Leather 5135 XXL Applications
- Securing and supporting tool bags on the job
- Carpentry and framing work requiring all-day wear
- Electrical and mechanical trades needing stable rig support
- General construction where comfort & load distribution matter
Occidental Leather 5135 XXL Installation Overview
- Measure and select the correct belt size; fasten at the midpoint hole.
- Thread tool bag loops onto the 2” overbelt and position as desired.
- Buckle the belt snugly at working height over jobsite clothing.
- Attach suspenders to the built-in loops if using for heavier loads.
- Make final fit adjustments for comfort and balance.
Occidental Leather 5135 XXL Specifications
| Size | XXL |
| Belt Width | 5" |
| Overbelt Width | 2" |
| Material | 12–14 oz Latigo Leather |
| Liner | Padded wool |
| Hardware | Nickel-plated steel |
| Color | Brown/Tan |
| Weight | 5.4 lbs |
Occidental Leather 8080DBLH XXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLH XXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLHXXL Description
Leather and industrial nylon combine to reduce weight in the OxyLights Framer Set with Double Outer Bags. This left-handed XXL rig features the NoSpill system with hand-specific, all-leather tool holders and reinforced OxyRed® corners for long-term durability. A padded two-ply bag design helps the bags keep their shape while staying comfortable through long days.
Occidental Leather 8080DBLHXXL Includes
- (1) OxyLights Framer Set with Double Outer Bags — Left-Handed, XXL
- (1) HD 3" Ranger Work Belt
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8080DBLHXXL Key Features
- 20 pockets & tool holders for organized storage
- Hand-specific NoSpill™ leather tool holders keep tools secure
- Padded, two-ply bags maintain shape and comfort
- Industrial nylon body with leather tool holders and reinforced corners
- HD 3" Ranger Work Belt included
- Made in USA
- Left-handed layout; Double outer bag design
Occidental Leather 8080DBLHXXL Applications
- Framing and rough carpentry
- General construction and remodeling
- Jobsite tool and fastener organization
- Left-handed workflows requiring hand-specific layout
Occidental Leather 8080DBLHXXL Installation Overview
- Size the HD 3" Ranger belt to your work clothing and fasten securely.
- Position the tool bag on the left and fastener bag on the right for a left-handed setup.
- Load essential tools and fasteners into dedicated pockets and holders.
- Place hammer in the rear holder and tape in the built-in tape holster.
- Adjust for comfort and even weight distribution before use.
Occidental Leather 8080DBLHXXL Specifications
| Pockets & Tool Holders | 20 |
| Belt Size | XXL |
| Handedness | Left-Handed |
| Weight | 3.8 lbs |
| Material | Leather and industrial nylon |
| Belt Type | HD 3" Ranger Work Belt |
| Colors | Green, Tan |
| Country of Manufacture | USA |
| Series | OxyLights |
| Model | 8080DBLH XXL |
| SKU | Occidental Leather 8080DBLHXXL |
Occidental Leather 5018DBLH Left Handed 3 Pouch Pro Tool Bag with Tape Measure Pouch
Occidental Leather 5018DBLH Left Handed 3 Pouch Pro Tool Bag with Tape Measure Pouch
Occidental Leather 5018DBLH Description
The 5018DBLH Left Handed 3 Pouch Pro Tool Bag streamlines access to everyday tools with a double outer-bag layout, integrated tape measure pouch, and dedicated holders for pencils, knives, chisels, torpedo level, and hammer. Built from premium leather and made in the USA, it offers efficient organization with 11 total pockets & holders.
Occidental Leather 5018DBLH Includes
- (1) 3 Pouch Pro Tool Bag, Left Handed (5018DBLH)
Occidental Leather 5018DBLH Key Features
- Left-handed layout — designed to be worn on the left side for dominant-hand access
- Double outer bags for added capacity and organization
- Built-in tape holster accepts tapes up to 35′ FatMax
- Hammer loop plus dedicated holders for pencils, knife, crayon, chisel, and torpedo level
- Premium leather construction; made in the USA
Occidental Leather 5018DBLH Applications
- Everyday tool carry for carpentry and framing tasks
- Jobsite measuring and layout with integrated tape holster
- Finish and trim work requiring quick access to small hand tools
- General construction where organized on-belt storage is needed
Occidental Leather 5018DBLH Installation Overview
- Slide the bag onto a compatible work belt.
- Wear on the left side for left-handed access.
- Load primary tools into the main and outer pockets; place hammer in loop.
- Seat tape measure in the built-in holster and secure.
- Adjust tool placement for balance and comfort before use.
Occidental Leather 5018DBLH Specifications
| Pockets & Tool Holders | 11 |
| Main Bag | 9″ W x 8″ H |
| Outer Bag | 5″ W x 5.5″ H |
| Weight | 1.95 lb |
| Material | Leather |
| Orientation | Left-handed |
| Country of Origin | USA |
| Tape Holster Capacity | Up to 35′ FatMax |
Occidental Leather 9515LH Left Handed Adjustable OxyLight Framer Description
Left-handed, adjust-to-fit OxyLight framer setup pairing the B8017DB tool bag with the patented B8064 fastener bag on a comfortable crossover belt. Built of abrasion-resistant industrial nylon with leather reinforcements and high-density neoprene padding for extra-wide hip support. Hand-specific tool holders, fixed bag design, and pre-installed D-rings keep your workflow efficient and stable. Includes a removable High Mount Hammer Holder (5059). Fits pant waists 32"–41".
Occidental Leather 9515LH Includes
- (1) 9515LH Left-Handed OxyLight Framer belt assembly
- (1) High Mount Hammer Holder (5059)
Occidental Leather 9515LH Key Features
- Adjust-to-Fit design for seasonal clothing changes (32"–41" pant waist)
- Left-handed, hand-specific tool layout
- Padded two-ply bags that hold their shape; fixed bag design prevents shifting
- Industrial nylon with leather tool holders and reinforced corners
- D-rings pre-installed for suspender systems
- Removable High Mount Hammer Holder included
- Made in the USA
Occidental Leather 9515LH Applications
- Framing and rough carpentry tool carry
- General construction and remodel jobsite organization
- Left-handed workflow optimization with hand-specific pouch placement
- Use with suspenders for added load support
Occidental Leather 9515LH Installation Overview
- Adjust belt to fit over typical work clothing within the 32"–41" range.
- Wear tool bag on left and fastener bag on right for left-handed use.
- Attach the removable High Mount Hammer Holder at the rear.
- Clip suspenders to the pre-installed D-rings if desired.
- Load tools and confirm secure, comfortable fit.
Occidental Leather 9515LH Specifications
| Pockets & Tool Holders | 21 |
| Belt Fit | Contracts to 32" pant (35" belt), expands to 41" pant (45" belt) |
| Material | Industrial nylon with leather reinforcements |
| Bags | B8017DB tool bag + patented B8064 fastener bag |
| Hammer Holder | High Mount 5059 (removable) |
| Suspension Ready | D-rings pre-installed |
| Weight | 4.1 lb (approx.) |
| Handedness | Left-handed setup |
| Made In | USA |
Occidental Leather B5625SM Small Black Building Framer Set
A pro-grade, all-leather framer’s rig engineered for speed and durability. Built from premium top?grain leather in classic black, this lightweight set features hand?specific pouch layouts, a NoSpill holder system, and reinforced back walls at high?stress points for long?term wear. Sized Small and supplied with the HD 3″ Ranger belt, 2?in?1 Tool & Hammer Holder, and two Oxy™ Tool Shields for sharp tool protection. Made in the USA.
Includes
- (1) B5625SM Green Building Framer Tool Belt Set
- (1) 5035 HD 3″ Ranger Work Belt
- (1) B5611 Green Building Fastener Bag
- (1) B5612 Green Building Tool Bag
- (1) 5020 2?in?1 Tool & Hammer Holder
- (2) 2003 Oxy Tool Shield
Key Features
- Premium top?grain leather construction — no break?in required
- Hand?specific holder layout supports a natural working rhythm
- NoSpill holder system keeps tools secure while moving
- Reinforced back walls at stress points for rugged longevity
- Side?by?side upper bag & tape mount for faster access
- Made in the USA
Applications
- Framing and general carpentry
- Rough?in construction where fast access to fasteners & layout tools is critical
- Jobsite use requiring robust, long?wear leather pouches
- Right?handed builders; left?handed version available separately (B5625LH)
Installation Overview
- Measure your current tool belt from buckle end to the hole you use most to confirm size.
- Adjust the 3″ Ranger belt to the midpoint hole for best fit; allow room for seasonal layers.
- Position fastener and tool bags for hand preference; attach 5020 holder and Oxy™ Tool Shields.
- Load core tools and verify balance and reach to frequently used pockets.
- Re?check buckle tension during first use as leather forms to your body.
Specifications
| Material | Premium top?grain leather |
| Color | Black |
| Pockets & Tool Holders | 24 |
| Belt Size | Small (Midpoint 34″) |
| Belt Style | 5035 HD 3″ Ranger Work Belt |
| Weight | Approx. 5.7 lb |
| Included Holders | 5020 2?in?1 Tool & Hammer Holder; (2) 2003 Oxy Tool Shields |
| Country of Origin | USA |
| Available Sizes | SM, M, L, XL, XXL, XXXL |
NOTE: For best fit, size the belt using your tool?belt measurement (not pant size) and secure tools in the correct holders to maintain the NoSpill function.
Occidental Leather B5114K Description
This quality handcrafted leather Cat’s Paw Sleeve kit allows you to carry a cat’s paw closer to your body. Designed for easy installation, the sleeve’s interior measures 10" x 2" x 0.75" and the kit includes copper rivets, installation instructions, and a video link for guidance.
Occidental Leather B5114K Includes
- (1) Cat’s Paw Pry Bar Sleeve
- (1) Copper Rivet Set
- (1) Installation Instructions
Occidental Leather B5114K Key Features
- Handcrafted premium leather construction
- Low-profile carry keeps cat’s paw snug to the body
- DIY installation kit with copper rivets and instructions
- Mounts to existing pouches, vests, or tool rigs
- Made in USA
Occidental Leather B5114K Applications
- Framing and general carpentry
- Roofing where secure tool retention is needed
- Finish carpentry and high-mobility tasks
- Organized carry for cat’s paw/pry bar on tool belts or vests
Occidental Leather B5114K Installation Overview
- Prepare tools: smooth face hammer, side/flush cutters, 9/32 deep socket, pick, drill with 3/16 bit, and a hard surface/anvil.
- Drill out the two outer rivets from the non-dominant side bag to remove the flared ends.
- Insert a rivet through the hanger front and through the sleeve’s hole.
- Set the washer tight using a hammer and socket or small pipe.
- Trim rivet length, leaving about 1/8"–3/16".
- Peen the rivet on a hard surface with a smooth face hammer to finish.
Occidental Leather B5114K Specifications
| Interior Dimensions | 10" L x 2" W x 0.75" D |
| Color | Black (OxyBlack) |
| Material | Leather |
| Size | One Size |
| Weight | 0.5 lb |
Occidental Leather B5055 Description
The Stronghold Suspension System (model B5055) delivers all?day comfort and stability with a padded, contoured yoke lined with Dri?Lex® to wick moisture. It distributes tool belt weight evenly to reduce hip and lower?back strain and includes a heavy?duty D?ring for hanging up your rig.
Occidental Leather B5055 Includes
- (1) Stronghold Suspender – Standard
Occidental Leather B5055 Key Features
- Even load distribution to relieve hip and lower?back strain
- Padded, contoured yoke with Dri?Lex® lining for sweat management
- Adjustable chest strap for quick on/off and secure fit
- Tool?friendly chest pockets for pencils and clip?on items
- Heavy?duty center D?ring for hanging up the entire rig
- One?size?fits?most standard; small size available separately
- Made in the USA
Applications
- Support and balance heavy tool belts during all?day wear
- Reduce lower?back and hip fatigue on framing, finish, and trim work
- Keep shoulder straps positioned securely while moving on the jobsite
- Hang full rig when not in use via integrated D?ring
Installation Overview
- Attach suspender clips/straps to your compatible tool belt or system.
- Place the padded yoke over shoulders; center the yoke on your back.
- Adjust front and side straps for even weight distribution.
- Buckle and fine?tune the chest strap to keep straps in place.
- Verify comfortable range of motion; re?adjust as needed.
Occidental Leather B5055 Specifications
| Brand | Occidental Leather |
| Model/SKU | B5055 |
| Product Type | Suspenders |
| Color | Black |
| Size | Standard |
| Material | Leather and nylon with Dri?Lex® lined yoke |
| Closure Type | Clip/strap attachments |
| Country of Origin | USA |
NOTE: The D?ring is for hanging the rig only and is not rated for safety tie?off or fall protection.
Occidental Leather 5237 Description
Designed for the 35’ FatMax, this high-mount, clip-on extra-large tape holster keeps your tape measure secure and within easy reach. Built from durable leather with a rugged steel belt clip, it installs quickly and rides high to reduce swing and improve mobility.
Occidental Leather 5237 Includes
- (1) Clip-On Tape Holster – Extra Large
Occidental Leather 5237 Features
- Clip-on design allows installation without removing your belt
- High-mount position for reduced swing and better mobility
- Proprietary steel belt clip fits up to 2" wide belts
- Durable, heirloom-quality leather construction
- Made in USA
- Extra Large size tailored for 35’ FatMax tapes
Occidental Leather 5237 Applications
- Secure belt-mounted carry for 35’ FatMax tape measures
- Carpentry, framing, and general construction work
- Improving jobsite mobility by keeping tape accessible
- Reducing tape swing during movement
- Use with tool belts up to 2" wide
Occidental Leather 5237 Installation Overview
- Slide the steel clip over your belt (fits up to 2" wide) at a preferred high-mount position.
- Seat the holster firmly against the belt to ensure a secure grip.
- Insert the 35’ FatMax tape into the holster opening.
- Confirm the tape is retained and easily accessible.
- Remove or reposition quickly as needed without taking off the belt.
Occidental Leather 5237 Specifications
| Material | Leather |
| Size | XL (Extra Large) |
| Color | Oxy Red |
| Belt Compatibility | Fits up to 2" wide belts |
| Clip Material | Proprietary steel belt clip |
| Weight | 135 g (per variant) |
| Made In | USA |
| Designed For | 35’ FatMax tape |
| SKU | 5237 |
Occidental Leather 8552 Description
Built for pros who need fast access and secure storage, the Oxy Pro Pouch clips on quickly and stays put with a rugged 2 in. steel belt clip. A drawstring top protects contents, while dual-layer nylon construction — 1000D sides with a 1050D bottom — stands up to tough, daily jobsite use. This Medium size measures 6 in. diameter x 7 in. high. Made in the USA.
Occidental Leather 8552 Includes
- (1) Oxy Pro Pouch, Medium - Green
Occidental Leather 8552 Features
- 2 in. steel clip for quick on/off belt or waistband attachment
- Drawstring closure keeps fasteners and parts contained
- Durable dual-layer nylon: 1000D sides with 1050D bottom
- Medium size capacity: 6 in. diameter x 7 in. high
- Proudly made in the USA
Occidental Leather 8552 Applications
- Holding screws, nails, and small fasteners
- Storing small tools or parts for carpentry and framing
- Clip-on pouch for light, on-the-go organization
- Supplemental storage on tool belts or work vests
Occidental Leather 8552 Installation Overview
- Attach the steel clip to a belt or waistband up to 2 in. wide.
- Load fasteners or small tools into the pouch.
- Pull the drawstring to secure contents as needed.
- Release the clip to remove the pouch when finished.
Occidental Leather 8552 Specifications
| Size | Medium |
| Color | Green |
| Dimensions | 6 in. diameter x 7 in. high |
| Material | 1000D nylon sides / 1050D nylon bottom |
| Closure | Drawstring |
| Clip | 2 in. steel belt/waistband clip |
| Belt Compatibility | Fits most belts up to 2 in. wide |
| Country of Origin | USA |
| Weight | 0.3 lb |
Occidental Leather 6530 Description
Keep your 2.5" can close at hand with the Occidental Leather Chew Can Holster. Made from rugged OxBlood leather, this holster features a sturdy 2" belt clip for secure attachment to your belt or waistband. Built for daily use, the embossed Occidental Leather logo adds a mark of quality, ensuring your dip can is always easily accessible on the job or on the go.
Occidental Leather 6530 Includes
- (1) Chew Can Holster
Occidental Leather 6530 Features
- Holds standard 2.5" round chew/dip cans
- Durable 2" belt/waistband clip
- Embossed Occidental Leather logo
- Classic OxBlood full-grain leather construction
- Made in the USA
Occidental Leather 6530 Applications
- Jobsite carry: keep cans accessible while working
- Framing or welding tasks where pockets are inconvenient
- General site walking and everyday carry
Occidental Leather 6530 Installation Overview
- Position the holster clip on a belt or waistband up to 2" wide.
- Secure the steel clip so the holster sits upright.
- Insert a standard 2.5" round can; confirm snug fit.
- Test accessibility with and without gloves.
Occidental Leather 6530 Specifications
| Material | Full-grain leather |
| Color | Red (OxBlood) |
| Clip Size | 2" steel clip |
| Compatibility | Fits standard 2.5" round chew/dip cans |
| Attachment | Clips to belts/waistbands up to 2" wide |
| Weight | 0.1 lb |
| Origin | Made in USA |
Occidental Leather B8551 Description
The Oxy Pro Pouch delivers fast access and rugged durability for pros. It features a 2-inch steel belt clip for quick on/off attachment and a drawstring top to secure contents. Built with dual-layer nylon — 1000D sides and a 1050D bottom — this small black pouch is made to withstand tough jobsite use. Available sizes include Small (5" diameter x 6" high), Medium (6" diameter x 7" high), and Tall (5" diameter x 8.5" tall). Proudly made in the USA.
Occidental Leather B8551 Includes
- (1) Oxy Pro Pouch, Small – Black
Occidental Leather B8551 Key Features
- 2" steel clip for rapid belt or waistband attachment
- Drawstring closure keeps fasteners and parts contained
- Dual-layer construction: 1000D nylon sides with 1050D nylon base
- Compact Small size for light, efficient carry
- Made in the USA
Occidental Leather B8551 Applications
- Carry nails, screws, and small hardware on the job
- Quick clip-on storage for carpentry and framing tasks
- Handy parts pouch for electrical, drywall, or finish work
- Supplemental storage on tool belts or work pants
Occidental Leather B8551 Installation Overview
- Attach the 2" steel clip to a belt or waistband (up to 2" wide).
- Load fasteners or small tools into the pouch.
- Pull the drawstring to secure contents.
- Release the drawstring and unclip to remove when finished.
Occidental Leather B8551 Specifications
| Brand | Occidental Leather |
| Model | B8551 |
| Product Type | Oxy Pro Pouch |
| Size | Small |
| Color | Black |
| Dimensions | 5" diameter x 6" high |
| Material | Dual-layer nylon: 1000D sides, 1050D bottom |
| Closure | Drawstring |
| Clip | 2" steel belt/waistband clip |
| Country of Origin | USA |
| Weight | 0.3 lb |
Occidental Leather 8554 Description
The Oxy Pro Pouch — Tall size — is built for pro users needing fast access and rugged durability. A 2 in. steel belt clip enables quick on/off attachment, while a drawstring top secures contents. Constructed with dual-layer nylon (1000D sides, 1050D bottom) to withstand tough job sites. Made in the USA.
Occidental Leather 8554 Includes
- (1) Oxy Pro Pouch, Tall – Green
Occidental Leather 8554 Features
- 2 in. steel clip for secure belt or waistband attachment
- Drawstring closure keeps fasteners and small tools contained
- Dual-layer build: 1000D nylon sides with 1050D nylon bottom for high abrasion resistance
- Tall capacity: 5 in. diameter x 8.5 in. high
- Clips to most belts up to 2 in. wide
- Made in the USA
Occidental Leather 8554 Applications
- Carry fasteners such as screws, nails, and hardware
- Quick-access storage for small hand tools and bits
- Materials handling on trim, framing, or service tasks
- Supplemental clip-on pouch for tool belts or work pants
Occidental Leather 8554 Installation Overview
- Slide the steel clip over a belt or waistband up to 2 in. wide.
- Load fasteners or small tools into the pouch.
- Cinch the drawstring to secure contents.
- Position for comfortable reach; adjust as needed.
- Release the clip to remove the pouch when finished.
Occidental Leather 8554 Specifications
| Size | Tall |
| Color | Green |
| Dimensions | 5 in. diameter x 8.5 in. tall |
| Material | Dual-layer nylon (1000D sides / 1050D bottom) |
| Closure | Drawstring |
| Clip | 2 in. steel belt clip |
| Belt Compatibility | Fits most belts/waistbands up to 2 in. wide |
| Made In | USA |
| Weight | 0.3 lb |
Showing 160/223
