Sort by:
Occidental Leather 5059 High Mount Hammer Holder Description
Made from premium full-grain belting leather, this compact high-mount hammer holder keeps your tool close and controlled for all-day comfort.
Includes
- (1) Occidental Leather 5059 High Mount Hammer Holder
Key Features
- High-mount profile reduces swing and keeps hammer close to the body
- 10 oz full-grain belting leather for durability
- Heavy-duty 2.5 inch steel loop fits most standard hammers
- Fits belts up to 3 inches wide
- Compact, comfortable carry — ideal for overhead work and climbing
- Handmade in the USA
Applications
- Framing and general carpentry
- Roofing and overhead tasks
- Ladder, lift, and on-the-move work
- Tight-space and close-quarter jobsites
Installation Overview
- Slide the holder onto a work belt up to 3 inches wide.
- Position at your preferred carry location for comfort and reach.
- Insert hammer head-first into the steel loop.
- Walk and bend to confirm minimal swing; adjust position as needed.
Specifications
| Material | 10 oz full-grain belting leather; steel loop |
| Loop Size | 2.5 in steel loop |
| Belt Compatibility | Up to 3 in wide belts |
| Dimensions | Approx. 4 in H x 4.5 in W (not including loop) |
| Weight | Approx. 161 g |
| Country of Origin | USA |
| Colors | OxyRed, OxyBlack |
| Model / SKU | 5059 |
Occidental Leather 2003 Oxy Tool Shield Description
The Oxy Tool Shield from Occidental Leather provides compact, clip-on protection for sharp tools and your gear. Designed to fit most Occidental tool bags or a pants pocket, it safely holds chisels, knives, diagonal cutters, and includes a slot for one round pencil.
Occidental Leather 2003 Includes
- (1) Oxy Tool Shield (Occidental Leather 2003)
Occidental Leather 2003 Key Features
- Clip-on convenience for bags or pockets
- Protects tools, bags, and body from sharp edges
- Holds a chisel, knife, or diagonal cutter plus one pencil
- Compact, lightweight, jobsite-ready build
- Fits most Occidental Leather bags and many other tool bags
Occidental Leather 2003 Applications
- Safe storage of sharp hand tools on tool belts or bags
- Protecting clothing and pouches from blade damage
- Keeping chisels and cutters accessible while preventing injury
- Organizing a pencil alongside a primary cutting tool
Occidental Leather 2003 Installation Overview
- Attach the shield by clipping it onto a tool bag edge or pocket.
- Insert the chosen tool into the main compartment until fully seated.
- Place one round pencil into the integrated slot if desired.
- Confirm the clip is secure and the tool is retained before use.
Occidental Leather 2003 Specifications
| Pockets & Slots | 2 (1 tool + 1 pencil) |
| Dimensions | 6" H x 2.6" W x 1.6" D |
| Weight | 2 oz |
| GTIN | 759244205206 |
| Color | Black |
| Compatibility | Clips to most tool bags or pockets |
Occidental Leather 5012 Hammer Holder Description
Our best-selling hammer holder built for long-term use. Hardware is captured between two layers of premium 12-oz leather and secured with plated steel rivets. A stitched leather back protects from rivet heads and minimizes handle slapping. Suitable for hammers, pipe wrenches, sheet metal shears, and similar tools.
Includes
- (1) Occidental Leather 5012 Hammer Holder
Key Features
- Dual-layer 12-oz leather construction for durability and comfort
- Heavy-duty 2.5 inch steel loop accommodates most hammers
- Fits belts up to 3 inches wide with dual slots
- Stitched back reduces handle movement and protects from rivet heads
- Made in the USA
Applications
- Framing: Secure, accessible hammer storage onsite
- Roofing: Keeps tools stable while working at height
- General construction: Universal holder for common hammer types
- Shop work: Compatible with belts up to 3 inches
Installation Overview
- Slide the holder onto a work belt using the two slots (fits up to 3 inches).
- Position the steel loop where access is most convenient.
- Ensure the holder sits flat and does not interfere with other pouches.
- Place the hammer in the loop and confirm stable carry.
Specifications
| Model | 5012 |
| Material | 12 oz full-grain leather; steel hardware |
| Loop Size | 2.5 inch steel loop |
| Belt Compatibility | Fits belts up to 3 inches wide |
| Weight | Approx. 0.5 lb (240 g) |
| Color Options | OxyRed or OxyBlack |
| Country of Origin | USA |
| UPC | 759244005905 |
Occidental Leather 5037 High Mount Tape Holder Description
Premium leather, belt-worn tape measure holster that rides high for easy reach and mobility. The 5037 size fits most 30’ tapes (including FatMax without clip) and is made in the USA. Compatible with belts up to 3 in. wide.
Includes
- (1) Occidental Leather 5037 High Mount Tape Holder
Key Features
- High-mount design keeps tape accessible and out of the way
- Fits belts up to 3 in. wide
- Premium, durable leather construction
- Made in the USA
- Size 5037 (Large) fits most 30’ tapes; accommodates FatMax without clip
Applications
- Securely carry a tape measure on a tool belt
- Framing, trim, and general carpentry tasks
- Jobsite measuring where quick access is essential
Installation Overview
- Thread the holster onto a belt up to 3 in. wide.
- Select the correct size; 5037 is for most 30’ tapes.
- Insert the tape measure; remove the clip if using FatMax for best fit.
- Position holster on belt for preferred high-mount access.
Specifications
| Material | Premium leather |
| Belt Compatibility | Up to 3 in. wide |
| Size | 5037 Large |
| Fit | Most 30’ tapes; fits FatMax without clip |
| Weight | Approx. 0.3 lb (159 g) |
| Made In | USA |
| Color Options | OxyRed, OxyBlack |
Occidental Leather 5020 Description
The Occidental Leather 5020 2-in-1 Tool & Hammer Holder combines a hammer loop and a compact tool pocket to double your carry capacity while taking up minimal belt space. Built from durable 12 oz English bridle leather with riveted and stitched reinforcement, it slides onto standard tool belts for fast access on framing, finish, or DIY jobs. Made in the USA. Dimensions: 3.5 in W x 6.5 in H; Weight: 0.4 lb.
Occidental Leather 5020 Includes
- (1) 2-in-1 Tool & Hammer Holder (Model 5020)
Occidental Leather 5020 Features
- Dual-function design: integrated hammer loop plus pocket for a hand tool
- Space-saving footprint to free up room on your belt
- 12 oz English bridle leather for long-term durability
- Slides onto standard tool belts for quick setup
- Heavy-duty stitching and metal rivets for jobsite toughness
- Made in the USA
Occidental Leather 5020 Applications
- Carry a hammer and primary hand tool together on one holder
- Framing, trim, and general carpentry tool belts
- Remodeling and punch-list work where compact carry is key
- Workshop use and weekend DIY tasks
- Jobsite setups needing fast access without adding bulk
Occidental Leather 5020 Installation Overview
- Thread the holder onto your tool belt at the preferred position.
- Orient the pocket and loop for dominant-hand access.
- Seat the hammer in the front loop and place a hand tool in the pocket.
- Check that tools hang freely with no interference while walking or kneeling.
- Reposition on the belt if needed for balance and comfort.
Occidental Leather 5020 Specifications
| Model | 5020 |
| Type | 2-in-1 Tool & Hammer Holder |
| Material | 12 oz English bridle leather |
| Carry Style | Slides onto standard tool belts |
| Dimensions | 3.5 in W x 6.5 in H |
| Weight | 0.4 lb |
| Country of Origin | USA |
NOTE: —
Occidental Leather 5046 Description
Durable clip-on tape holster built from heirloom-quality leather with an extra-long, wide steel clip for a secure, high-mount hold on your belt. Designed for demanding field use and quick access, made in the USA.
Occidental Leather 5046 Includes
- (1) Clip-On Tape Holster
Occidental Leather 5046 Key Features
- Clip-on design installs without removing your belt
- Proprietary extra-long, wide steel clip resists accidental release
- High-mount position reduces swing and improves mobility
- Heirloom-quality leather withstands tough jobsite conditions
- Made in the USA
Occidental Leather 5046 Applications
- Securely carry a tape measure on tool belts up to 2″ wide
- Framing and carpentry measuring tasks
- General construction and remodeling
- Jobsite mobility with quick tape access
Occidental Leather 5046 Installation Overview
- Position the clip over your belt (fits up to 2″ wide).
- Slide the holster down until the clip locks onto the belt.
- Insert the tape measure into the leather holster.
- Confirm secure engagement and comfortable placement.
Occidental Leather 5046 Specifications
| Model | 5046 |
| Material | Heirloom-quality leather |
| Clip | Proprietary extra-long, wide steel belt clip |
| Belt Compatibility | Up to 2″ wide belts |
| Capacity | Holds up to a 35′ Fat Max |
| Made In | USA |
| Weight | Approx. 0.3 lb (about 135 g) |
Occidental Leather 5066 Cordless Drill Holster Description
All-leather, heavy-duty angled drill holster designed for comfort and quick access. Fits most cordless drills and includes two holders for drill/driver bits. Right-hand model 5066; left-hand version available as 5066LH.
Includes
- (1) Occidental Leather 5066 Cordless Drill Holster
Key Features
- All-leather, angled body for balanced, ergonomic access
- Fits most cordless drills
- Two dedicated drill/driver bit holders
- Premium full-grain leather construction
- Available in right- or left-hand orientations (5066 / 5066LH)
- Made in the USA
Applications
- Keep a cordless drill secured and accessible on your belt
- Hands-free carrying while climbing ladders or moving on site
- Carpentry, framing, electrical, and general construction tasks
- Quick access to driver bits during fastening work
Installation Overview
- Slide holster onto a compatible work belt.
- Position at preferred side for handed orientation.
- Insert drill into angled pocket and secure with the strap if desired.
- Store two bits in the integrated bit holders.
Specifications
| Material | Premium full-grain leather |
| Orientation | Right-hand (Left-hand available: 5066LH) |
| Pockets & Tool Holders | 3 |
| Bit Holders | 2 |
| Tool Compatibility | Fits most cordless drills |
| Made In | USA |
Occidental Leather 5040 Clip-On Hammer Holder Description
Secure your hammer with the Occidental Leather 5040 Clip-On Hammer Holder. Built from quality full-grain leather with a heavy-duty steel loop, it clips on fast for instant access without removing your belt. Made in the USA.
Occidental Leather 5040 Includes
- (1) Occidental Leather 5040 Clip-On Hammer Holder
Occidental Leather 5040 Features
- Clip-on design enables quick on/off installation anywhere
- Full-grain leather backing with high-strength steel loop
- Heavy-duty 2.5 inch loop accommodates most standard hammers
- Spring steel clip fits belts up to 2" wide
- Made in the USA
Occidental Leather 5040 Applications
- Hands-free hammer carry on tool belts
- Quick add-on holder for ladders, overhead, or mobile tasks
- Temporary or supplemental hammer storage without removing belt
- Jobsite use for pros and serious DIYers
Occidental Leather 5040 Installation Overview
- Slide the spring steel clip over a belt up to 2" wide.
- Position the holder at your preferred carry point.
- Seat the hammer in the steel loop and check balance.
- Confirm a secure fit before working.
Occidental Leather 5040 Specifications
| Materials | Full-grain leather backing; high-strength steel loop |
| Clip Compatibility | Spring steel clip fits belts up to 2" wide |
| Loop Size | 2.5" steel loop |
| Dimensions | Approx. 5" H x 3.5" W |
| Weight | 0.3 lb |
| Origin | Made in USA |
Occidental Leather 5047 Tape & Knife Holder Description
A compact leather holster that keeps a utility knife, two pencils, and a 35’ tape (or 25’ FatMax) close at hand without the bulk. Doubles as a reliable chalk line holder — ideal for quick tasks and finish work.
Occidental Leather 5047 Includes
- (1) 5047 Tape & Knife Holder
Occidental Leather 5047 Features
- All-in-one layout holds a utility knife, 2 pencils, and a tape measure
- Works great as a chalk line holster
- Slim, lightweight profile for tight spaces and finish tasks
- Durable, high-quality leather construction
- Made in the USA
- Fit tip: removing the tape clip may improve seating; leather breaks in over time
Occidental Leather 5047 Applications
- Finish carpentry and punch-list work
- Quick tasks needing only essential tools
- Organizing a tape, knife, pencils, and chalk line on a belt
Occidental Leather 5047 Installation Overview
- Thread your work belt through the holster slots and secure it.
- Load the tape measure, utility knife, and pencils into their pockets.
- Allow time for leather break-in; remove the tape clip if needed for a better fit.
Occidental Leather 5047 Specifications
| Material | Leather |
| Tool Capacity | Utility knife, 2 pencils, 35’ tape or 25’ FatMax, chalk line |
| Weight | 0.5 lb |
| Origin | USA |
| Model | 5047 |
| GTIN | 759244210606 |
NOTE: Leather needs a short break-in; tapes with rubberized shoulders may seat slowly and may require removing the tape clip for the best fit.
Occidental Leather 5137 Description
The 5137 Extra Large Tape Holster rides high on your belt for quick access and smooth mobility. Built from premium leather and sized specifically to secure 35' FatMax tape measures, it fits work belts up to 3″ wide and is handcrafted in the USA for long-term durability.
Occidental Leather 5137 Includes
- (1) Holster
Occidental Leather 5137 Key Features
- Belt-worn, high-mount design for improved mobility
- Sized for 35' FatMax tape measures
- Premium, durable leather construction
- Fits belts up to 3″ wide
- Handcrafted in the USA
Occidental Leather 5137 Applications
- Secure tape measure carry for framing & carpentry
- General construction measuring tasks
- Jobsite mobility where quick access is essential
- Tool belt organization for professional trades
Occidental Leather 5137 Installation Overview
- Slide the holster onto a work belt up to 3″ wide.
- Position high on the belt for comfortable reach.
- Insert your 35' FatMax tape into the pocket.
- Confirm secure fit before use.
Occidental Leather 5137 Specifications
| Size | Extra Large |
| Material | Premium leather |
| Belt Compatibility | Fits belts up to 3″ wide |
| Tape Fit | Designed for 35' FatMax |
| Made In | USA |
| Color Options | OxyRed, OxyBlack |
Occidental Leather 5545 Leather Nail Strip Holster Description
Durable, belt-worn holster designed to hold nail strips up to 16D. Handcrafted from heavy belting leather for long service life and quick access on the job.
Includes
- (1) Leather Nail Strip Holster
Key Features
- Belt-worn holster accepts nail strips up to 16D
- Heavy belting leather construction for durability
- Holds up to 8 racks for fewer reloads
- Loops onto belts up to 3″ wide
- Made in the USA
Applications
- Carry and organize nail strips for framing nailers
- Speed up reloads while keeping nails within reach
- Reduce pocket clutter and protect nail strips on the belt
Installation Overview
- Thread the holster onto a work belt up to 3″ wide.
- Insert nail strips (up to 16D) into the pouch.
- Position for preferred hand access and begin use.
Specifications
| Material | Heavy belting leather |
| Capacity | Holds up to 8 racks |
| Compatibility | Nail strips up to 16D |
| Fits Belt Width | Up to 3″ |
| External Dimensions | 4.5″ W x 7″ H |
| Internal Dimensions | 3.75″ W x 6.75″ H |
| Weight | 0.5–0.6 lb (approx.) |
| Country of Origin | USA |
Occidental Leather 5328 Description
Hand crafted from rugged 10 oz Latigo belting leather, the Occidental Leather 5328 Large Clip-On Phone Holster protects plus-size smartphones with an Italian-style drop clasp and a heavy-duty spring steel belt clip. Clips securely to belts up to 2" wide. Made in the USA.
Occidental Leather 5328 Includes
- (1) Occidental Leather 5328 Clip-On Leather Phone Holster (Large)
Occidental Leather 5328 Features
- 10 oz Latigo belting leather for durability
- Heavy-duty spring steel belt clip for secure attachment
- Italian-style drop clasp for protected, quick access
- Fits iPhone 6 Plus, 7 Plus & similarly sized phones (verify dimensions)
- Clips to belts up to 2" wide
- Made in the USA
Occidental Leather 5328 Applications
- Hands-free phone carry on work belts
- Protection for larger smartphones on jobsites
- Daily use for tradespeople, contractors, and field techs
Occidental Leather 5328 Installation Overview
- Clip the holster onto a belt up to 2" wide.
- Insert phone into the pouch.
- Close and secure the drop clasp.
- Verify the clip is firmly attached before use.
Occidental Leather 5328 Specifications
| Material | 10 oz Latigo belting leather |
| Clip Type | Heavy-duty spring steel |
| Closure | Italian-style drop clasp |
| Belt Fit | Up to 2" wide |
| Interior Dimensions | 7.0" H x 3.25" W x 0.75" D |
| Weight | 0.458 lb |
| Country of Origin | USA |
Occidental Leather 5068 Description
All-leather construction calculator case with a secure snap closure for dependable jobsite protection. Designed to fit Construction Master models I–IV and other brands, it mounts on belts from 1" to 3" wide. Proudly made in the USA.
Occidental Leather 5068 Includes
- (1) 5068 Construction Calculator Case
Occidental Leather 5068 Features
- Durable all-leather body with reinforced stitching
- Snap-closure flap keeps contents secure
- Fits Construction Master I–IV and most similar calculators
- Belt compatible: fits 1" to 3" wide belts
- Mount options: Belt-worn or Clip-on (varies by color)
- Available colors: OxyRed, OxyBlack
- Made in the USA
Occidental Leather 5068 Applications
- Protecting construction calculators on the jobsite
- Hands-free belt carry for quick calculator access
- Preventing drops, dirt, and damage during work
Occidental Leather 5068 Installation Overview
- Choose belt-worn or clip-on attachment.
- Thread onto a 1"–3" belt or attach via the clip.
- Insert the calculator fully into the case.
- Close the snap and verify secure retention.
Occidental Leather 5068 Specifications
| Material | All leather |
| Closure | Snap |
| Dimensions | 3.5" W x 5.5" H x 1.25" D |
| Belt Width Compatibility | 1" to 3" |
| Compatibility | Construction Master I–IV and other calculators |
| Mount Styles | Belt-worn or Clip-on |
| Weight | 0.3 lbs |
| Made In | USA |
| Available Colors | OxyRed, OxyBlack |
Occidental Leather 8567 Description
Keep your cordless drill secure and accessible with the Occidental Leather 8567 Belt Worn Nylon Drill Holster. This compact, hybrid nylon & leather carrier fits a 3" belt and works with popular Bosch, Hitachi, Makita, and Milwaukee models, offering 4 pockets/tool holders for bits and small tools. Made in the USA.
Occidental Leather 8567 Includes
- (1) Drill Holster
Occidental Leather 8567 Key Features
- Fits 3" belts for stable, belt-worn carry
- Compatible with Bosch PS20-02, 3318-2G, 33614-26, 23612 Impactor; Hitachi WH12DAF2; Makita 18V LXT Impact Drivers, BTD 142HW, and 18V drills; Milwaukee 18V Lithium BDT 140, LXT 18V drills
- Hybrid build — durable nylon body reinforced with leather
- 4 pockets/tool holders for drill, bits, fasteners, and small tools
- Lightweight design at 0.5 lbs
- Slides easily onto most standard tool belts
- Made in the USA
Occidental Leather 8567 Applications
- Framing and general construction
- Punch-out and finish work
- Electrical & service technician tasks
- Remodeling and jobsite tool organization
Occidental Leather 8567 Installation Overview
- Slide the holster onto your tool belt (fits 3" belts).
- Insert the drill/driver into the main pocket.
- Secure using the snap strap.
- Load bits and small tools into the front holders.
- Confirm a snug fit before working.
Occidental Leather 8567 Specifications
| Pockets & Tool Holders | 4 |
| Fits Belt Size | 3" |
| Material | Nylon with leather reinforcement |
| Weight | 0.5 lbs |
| Made In | USA |
| Compatibility | Bosch PS20-02, 3318-2G, 33614-26, 23612 Impactor; Hitachi WH12DAF2; Makita 18V LXT, BTD 142HW, 18V drills; Milwaukee 18V Lithium BDT 140, LXT 18V drills |
Occidental Leather 5156 Description
The Occidental Leather 5156 is a traditional steel cradle hammer holder designed for narrow belt setups. It features a 2" belt slot compatible with the 2" Leather Work Belt (Model 5002) and the rear strap of the Stronghold Beltless System. The steel cradle is riveted to extra-heavy full-grain leather for long-lasting durability and stable carry.
Occidental Leather 5156 Includes
- (1) 2" Cradle Hammer Holder (Occidental Leather 5156)
Occidental Leather 5156 Key Features
- Steel hammer cradle for secure, stable carry
- Riveted to extra-heavy full-grain leather back
- 2" slot sized for narrow belts and Stronghold Beltless rear strap
- Compact profile reduces swing and shifting
- Made in the USA
Occidental Leather 5156 Applications
- Everyday hammer carry on 2" work belts
- Use with Stronghold Beltless System rear strap
- Framing and carpentry where quick access is needed
- Compact belt rigs that demand minimal swing
Occidental Leather 5156 Installation Overview
- Thread a 2" belt or Stronghold Beltless rear strap through the slots.
- Position holder for preferred reach and balance.
- Secure belt around waist.
- Insert hammer and confirm stable, comfortable carry.
Occidental Leather 5156 Specifications
| Material | Steel cradle riveted to extra-heavy full-grain leather |
| Belt Slot Width | 2 in. |
| Compatibility | 2" Leather Work Belt (5002); Stronghold Beltless System rear strap |
| Weight | 0.4 lb |
| Origin | Made in USA |
| Model | 5156 |
Occidental Leather 5028 Single Snip Holster Description
Compact, full-grain leather snip holster originally built for steel framers. Sized for WISS aviation snips and many small tools, with a rigid, low-swing carry that slides securely onto belts up to 3" wide. Handcrafted in the USA.
Occidental Leather 5028 Includes
- (1) Occidental Leather 5028 Single Snip Holster
Occidental Leather 5028 Features
- Multi-use pouch designed for snips; also fits various small tools
- Rigid leather build for a secure, low-swing carry
- Slides onto belts up to 3" wide for a stable fit
- Durable full-grain leather construction
- Handcrafted in the USA
Occidental Leather 5028 Applications
- Steel framing and metal stud work
- Carpentry and general contracting
- Daily belt carry for aviation snips and similar tools
- Low-swing hammer or tool carry alternative
Occidental Leather 5028 Installation Overview
- Slide the holster onto a belt up to 3" wide.
- Insert snips or a compatible tool fully into the pocket.
- Check clearance and secure positioning before use.
- Periodically clear debris and verify fit.
Occidental Leather 5028 Specifications
| Material | Full-grain leather |
| Dimensions | 2.75" W x 5.5" H |
| Belt Compatibility | Fits belts up to 3" wide |
| Weight | 0.3 lb |
| Country of Origin | USA |
| Compatibility | WISS aviation snips (models vary) |
Occidental Leather 5032 Description
Compact, all-leather tapered holster designed to secure an ironworker’s bull pin or nail bar on your belt. Handcrafted in the USA for durable, reliable carry with quick access on the job.
Occidental Leather 5032 Includes
- (1) Occidental Leather 5032 Tapered Tool Holster
Occidental Leather 5032 Key Features
- All-leather construction built for tough jobsite use
- Tapered design securely holds bull pins or nail bars
- Slides onto belts up to 3" for comfortable, hands-free carry
- Handcrafted in the USA
- Compact size for minimal swing and quick access
Occidental Leather 5032 Applications
- Bull pin carry for ironworkers and steelworkers
- Nail bar storage on tool belts
- Jobsite belt accessory for organized tool access
- Daily use in construction and industrial settings
Occidental Leather 5032 Installation Overview
- Slide the holster onto a belt up to 3" wide.
- Position at preferred carry location for access.
- Insert bull pin or nail bar into tapered pocket.
- Check retention and adjust belt placement as needed.
- Inspect stitching and rivets periodically for wear.
Occidental Leather 5032 Specifications
| Material | Premium leather |
| Dimensions (W x H) | 1.75" x 6.5" |
| Weight | 0.2 lbs |
| Belt Fit | Up to 3" belt |
| Color Options | OxyRed, OxyBlack |
| Origin | Made in USA |
Occidental Leather 6568 Description
All-leather clip-on case with a secure snap closure to protect and carry your construction calculator. Designed to fit Construction Master models I–IV and other similar calculators; clip-on attachment for fast on/off access.
Occidental Leather 6568 Includes
- (1) Clip-on leather construction calculator case
Occidental Leather 6568 Features
- All-leather construction with reinforced stitching for durability
- Secure snap closure keeps devices protected
- Clip-on attachment for quick belt or pocket mounting
- Fits Construction Master models I, II, III, IV and other brands
- Also available as a belt-worn model (5068)
Occidental Leather 6568 Applications
- Carry and protect construction calculators on the jobsite
- Quick access to calculator during layout and measurement tasks
- Hands-free storage while climbing ladders or moving materials
Occidental Leather 6568 Installation Overview
- Insert calculator into the case.
- Close the flap and snap to secure.
- Slide the metal clip over your belt or waistband until fully seated.
- Verify the case is firmly attached before working.
Occidental Leather 6568 Specifications
| Material | All-leather |
| Closure | Snap |
| Attachment | Clip-on |
| Compatibility | Construction Master I–IV and other brands |
| Dimensions | 3.5" W x 5.5" H x 1.25" D |
| Weight | 0.3 lb |
| Made In | USA |
| Color | OxyRed (clip-on) |
Occidental Leather 5518 No Slap Hammer Holder Description
Secure and stabilize your hammer with the all-leather No Slap Hammer Holder. The long sleeve-style design keeps handles upright to minimize swing and prevent “knee-capping,” while fitting belts up to 3” wide. Built from heavy-duty leather and made in the USA.
Includes
- (1) Occidental Leather 5518 No Slap Hammer Holder
Key Features
- Long sleeve design reduces tool swing and keeps handles secure
- All-leather construction for durability
- Holds hammers, hammer tackers, and flat bars (up to 1 5/8” diameter)
- Fits work belts up to 3” wide
- Made in the USA
Applications
- Carry and secure hammers while walking or climbing
- Hold hammer tackers and flat bars without excessive swinging
- Ideal for framing, carpentry, and general construction
Installation Overview
- Thread the holder onto a belt up to 3” wide.
- Position the sleeve at your preferred carry location.
- Insert the tool handle fully into the leather sleeve.
- Verify secure fit and minimal swing during movement.
Specifications
| Material | Heavy-duty leather |
| Tool Capacity | Hammers, tackers, flat bars up to 1 5/8” diameter |
| Belt Compatibility | Up to 3” wide |
| Weight | 0.3 lb |
| Country of Origin | USA |
Occidental Leather 8505 Description
Clip-on nylon tool holder keeps go-to tools at hand. Features 4 total pockets sized for a utility knife, pencils and a 35’ tape (accepts FatMax). Compact 4.5" x 9" design for quick access on belt or pocket.
Occidental Leather 8505 Includes
- (1) 8505 Clip-On Nylon Tool Holder
Occidental Leather 8505 Key Features
- Clip-on mount fastens to belt or pocket
- 4 pockets for utility knife, pencils, and 35’ tape
- Lightweight, jobsite-tough design
- Made in the USA
Occidental Leather 8505 Applications
- Keep tape, knife, and pencils within reach while working
- Add-on clip pouch for belts, pockets, or vests
- Organized storage for measuring and marking tasks
Occidental Leather 8505 Installation Overview
- Attach the clip to your belt or pocket.
- Load tools into the designated pockets.
- Verify secure fit and adjust position for comfort.
Occidental Leather 8505 Specifications
| Pockets & Holders | 4 |
| Dimensions | 4.5" W x 9" H |
| Weight | 0.2 lb |
| Mount Type | Clip-on |
| Tape Compatibility | 35’ tape, FatMax accepted |
| Country of Origin | Made in USA |
Occidental Leather 5013 Shear Holster Description
Keep essential cutting tools at your side with the Occidental Leather 5013 Shear Holster. This USA–made leather sheath provides a snug, low?profile carry for most pliers, side cutters, and pruning shears, making it ideal for jobsite, landscaping, and garden use. Threads onto belts up to 3″ wide for quick access and all?day comfort.
Includes
- (1) Shear Holster
Key Features
- Universal fit for most pliers, side cutters, and pruning shears (including popular Felco models)
- Compact, low?profile design keeps tools secure & easy to reach
- Premium leather construction built for rugged daily use
- Fits belts up to 3″ wide
- Made in the USA
Applications
- Tool belt carry for pliers and side cutters on the jobsite
- Pruning and garden maintenance with shears
- Landscaping & groundskeeping
- Field service and repair work requiring quick tool access
- General construction and DIY projects
Installation Overview
- Confirm your tool fits the holster (pliers, side cutters, or pruning shears).
- Thread the holster onto a belt up to 3″ wide.
- Position on your preferred side for dominant?hand access.
- Insert the tool with blades closed and seat it fully.
- Check retention and adjust holster position for comfort and reach.
Specifications
| Material | Leather |
| Dimensions | 2.75″ W x 5.5″ H |
| Belt Compatibility | Fits belts up to 3″ wide |
| Tool Compatibility | Pliers, side cutters, pruning shears |
| Country of Origin | USA |
| Model | 5013 |
Occidental Leather 5025 Plier & Tool Holster Description
Compact, full?grain leather holster with an open-bottom design for pliers, side cutters, crimpers, and 10–24 oz plumb bobs. Built light yet durable for everyday field use and minimal bulk on your belt. Made in the USA.
Occidental Leather 5025 Includes
- (1) Occidental Leather 5025 Plier & Tool Holster
Occidental Leather 5025 Features
- Open-bottom design helps shed debris and fits longer tools
- Holds pliers, side cutters, crimpers, and 10–24 oz plumb bobs
- Premium full?grain leather construction for long service life
- Compact profile reduces swing and bulk on your belt
- Made in the USA
Occidental Leather 5025 Applications
- Keep pliers and cutters accessible for electrical and telecom work
- Carry a plumb bob for layout, framing, or surveying tasks
- General tool belt organization with a slim holster footprint
Occidental Leather 5025 Installation Overview
- Slide the holster onto your work belt at the desired position.
- Secure belt snugly to limit swing and maintain access.
- Insert pliers, cutters, or plumb bob—long tools pass through the open bottom.
- Verify tools seat securely and adjust position for comfort.
Occidental Leather 5025 Specifications
| Material | Full?grain leather |
| Dimensions | 2.5" W x 5" H |
| Weight | 0.3 lb |
| Design | Open-bottom |
| Compatibility | Pliers, side cutters, crimpers, 10–24 oz plumb bobs |
| Origin | Made in the USA |
| UPC | 759244008104 |
Occidental Leather 8574 Description
Handcrafted clip-on leather phone holster with heavy-duty elastic sides and a secure Velcro® closure. Designed for compact phones such as iPhone 6/7/8/X and Galaxy S6/S7/S9 (not Plus/Max sizes). Includes a 2” spring steel belt clip for fast attachment to belts or waistbands. Made in the USA.
Occidental Leather 8574 Includes
- (1) Clip-On Expandable Phone Holster
Occidental Leather 8574 Features
- Velcro® closure for quick, secure access
- Expandable elastic sides — up to 1-1/2” of flex
- 2” spring steel belt clip for firm attachment
- Handcrafted full-grain leather construction
- Made in the USA
Occidental Leather 8574 Applications
- Daily carry on belt or waistband
- Jobsite phone protection and quick access
- Secure storage for compact smartphones
- Walking, commuting, and on-the-go use
Occidental Leather 8574 Installation Overview
- Slide or clip the 2” steel clip onto belt/waistband.
- Place phone into the pocket.
- Close the flap and press the Velcro® to secure.
- Confirm a snug fit before use.
Occidental Leather 8574 Specifications
| Material | Leather with elastic side panels |
| Belt Clip | 2” spring steel |
| Pocket Size | 3.5” x 5.5” |
| Expandability | Elastic sides expand up to 1-1/2” |
| Compatibility | Compact phones (e.g., iPhone 6/7/8/X; Galaxy S6/S7/S9); not for Plus/Max sizes |
| Country of Origin | USA |
| Weight | 0.2 lb |
| SKU | 8574 |
| GTIN | 759244326208 |
Occidental Leather 5527 Offset Snip Holster Description
Keep offset snips and pruning shears secure and close at hand. This full-grain leather holster fits popular offset metal snips such as Wiss M6/M7 and similar tools, accepts belts up to 3″ wide, and is proudly made in the USA.
Occidental Leather 5527 Includes
- (1) Offset Snip Holster
Occidental Leather 5527 Features
- Designed for offset metal snips (Wiss M6/M7) & pruning shears
- Full-grain American leather construction for durability
- Works with belts up to 3″ wide for stable carry
- Compatible with Oxy™ Tool Shield for added protection
- Made in the USA
Occidental Leather 5527 Applications
- Steel framing and sheet metal work
- General contracting and remodeling
- Landscaping and pruning tasks
- DIY projects requiring frequent snip use
Occidental Leather 5527 Installation Overview
- Slide holster onto a work belt up to 3″ wide.
- Seat the holster in your preferred position for easy reach.
- Insert offset snips or pruning shears into the pouch.
- Optionally add an Oxy™ Tool Shield for extra liner protection.
Occidental Leather 5527 Specifications
| Material | Full-grain American leather |
| Dimensions | 4″ W x 7.75″ H |
| Belt Compatibility | Up to 3″ wide |
| Weight | Approx. 0.3 lb (145 g) |
| Fits Tools | Offset snips (Wiss M6/M7) & pruning shears |
| Origin | Made in USA |
Occidental Leather B5057 Black Pocket Caddy Description
Compact 4-pocket leather organizer that slips into your pocket or attaches to a belt to protect you, your tools, and your clothing while keeping essentials like pliers and screwdrivers within easy reach.
Includes
- (1) Caddy
Key Features
- Compact 4-pocket layout organizes small hand tools
- Fits in most pants pockets; protects tools and clothing
- Snap loop attaches to belts up to 2″ wide
- Durable leather construction for everyday use
- Great for small repairs, shop work, gardening, cabinetmaking, and farm maintenance
Applications
- Small repair and maintenance tasks
- Shop and bench work tool organization
- Gardening and outdoor upkeep
- Cabinetmaking and finish work
- Farm and field repairs
Installation Overview
- Load the pockets with frequently used small tools.
- Place the caddy in your pants pocket for quick access, or
- Use the snap loop to secure the caddy to a belt up to 2″ wide.
- Adjust tool placement for balance and comfort.
Specifications
| Pockets & Tool Holders | 4 |
| Dimensions | 6″ W x 10″ H |
| Color | Black |
| Material | Leather |
| Belt Compatibility | Snap loop fits belts up to 2″ wide |
| Weight | 0.6 lb |
| Made In | USA |
Occidental Leather 8068 Impact Gun and Drill Bag Description
Compact drill/screw gun storage designed for the right side. The main bag features two compartments — a dedicated holster for cordless drills or screw guns and a pouch for tools or quick-release clamps used in metal stud work. Includes a patented 2-in-1 outer pouch, holders for driver bits and pencil, a right-rear leather sleeve for Clip-On items, and a rafter square slot behind the outer pouch with a rear-facing square edge. Made in the USA.
Occidental Leather 8068 Includes
- (1) Impact / Screw Gun and Drill Bag
Occidental Leather 8068 Features
- Main bag with two compartments: holster plus tool/clamp pouch
- Right-side layout; holster fits cordless drills or screw guns
- Patented 2-in-1 outer pouch for flexible storage
- Driver bit and pencil holders
- Leather sleeve for Clip-On accessories
- Rafter square slot positioned behind outer pouch; square edge to rear
- Ideal for metal framing
- Made in the USA
Occidental Leather 8068 Applications
- Carry and protect cordless drills or screw guns on the job
- Organize driver bits, pencils, and small hand tools
- Hold quick-release clamps for metal stud work
- Keep a rafter square accessible while framing
- Add clip-on accessories via leather sleeve
Occidental Leather 8068 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.25 lbs |
| Orientation | Right side |
Occidental Leather 5066LH Description
The Occidental Leather 5066LH Left Handed Cordless Drill Holster is an all-leather, heavy-duty holster with an angled, ergonomic body for balance and comfort. It includes two holders for drill/driver bits and fits most cordless drills. Built from premium full-grain leather and proudly made in the USA.
Occidental Leather 5066LH Includes
- (1) 5066LH Left Handed Cordless Drill Holster
Occidental Leather 5066LH Features
- Premium full-grain leather construction for long-term durability
- Angled design for ergonomic access, balance, and comfort
- Two dedicated holders for drill or driver bits
- Left-handed layout — typically worn on the right side
- Compatible with most cordless drills
- Lightweight at just 0.6 lb
- Made in the USA
Occidental Leather 5066LH Applications
- Hands-free carry of cordless drills on a work belt
- Quick-access holster setup for left-handed users
- General construction, carpentry, and remodeling tasks
- Electrical, plumbing, and HVAC installations
- Jobsites requiring secure drill retention and easy reach
Occidental Leather 5066LH Installation Overview
- Slide the holster onto your work belt at the preferred position.
- Orient for a left-handed draw (typically worn on right side).
- Place the cordless drill into the main pocket.
- Store driver/drill bits in the two front bit holders.
- Use the retention strap as needed and verify stability.
Occidental Leather 5066LH Specifications
| Material | Premium full-grain leather |
| Handedness | Left Handed |
| Pockets & Tool Holders | 3 |
| Weight | 0.6 lb |
| Compatibility | Fits most cordless drills |
| Country of Manufacture | USA |
| Right-Handed Version | 5066 |
Occidental Leather 5014 Universal Holster Description
Carry essentials like squares, pliers, tin snips, and wrenches with this durable, open-bottom leather holster. The streamlined design offers fast access and accommodates longer tools while preventing debris build-up. Fits most work belts and is built for daily jobsite use.
Occidental Leather 5014 Includes
- (1) Holster
Occidental Leather 5014 Features
- Universal holster with open-bottom design
- Ideal for squares, pliers, side cutters, tin snips, and large crescent wrenches
- Durable leather construction for everyday use
- Belt-mounted carry — fits belts up to 3” wide
- Made in the USA
Occidental Leather 5014 Applications
- Hold and access pliers, snips, and cutters on the job
- Carry layout squares and small hand tools
- Organize wrenches and longer tools with pass-through bottom
- Add-on holster for tool belts and work belts
Occidental Leather 5014 Installation Overview
- Slide the holster onto a work belt (up to 3” wide).
- Position at preferred reach point on the belt.
- Insert tools; longer tools can pass through the open bottom.
- Confirm secure fit and accessibility before use.
Occidental Leather 5014 Specifications
| Dimensions | 2.25” W x 6” H |
| Carry Style | Belt-mounted; fits belts up to 3” |
| Material | Leather |
| Weight | 0.3 lbs |
| Country of Origin | USA |
