Holiday Deal Guide

Occidental Leather 5035 SM Key Features

• 3 in wide main belt for support
• 2 in leather tongue with steel roller buckle
• Premium 12-14 oz bridle leather construction
• Edge stitched for long-term durability
• Ideal foundation for tool and fastener bags
• Made in USA

Occidental Leather 5035 SM Applications

• Base belt for professional tool carry systems
• Construction and carpentry tool rigs
• Framing, finish work, and general trades
• Pairing with pouches, holsters, and fastener bags

Occidental Leather 5035 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. Thread tool bags and accessories onto the 2 in tongue/loop.
4. Buckle at the midpoint hole; adjust within the 4 in range each way.
5. Ensure comfortable fit over work clothing before use.

Occidental Leather 5009 Features

• Heavy duty bridle leather construction
• Large wool lined shoulder pads for comfort
• Spring clip attachment with loop hardware
• Fully adjustable straps
• Made in USA

Occidental Leather 5009 Applications

• Distribute tool belt weight for reduced strain
• Stabilize heavy tool rigs during carpentry or framing
• Attach to Occidental and other work belts using clips
• Comfort support for long jobsite days

Occidental Leather 5009 Installation Overview

1. Attach spring clips and loop hardware to your work belt.
2. Position suspenders so pads rest on shoulders.
3. Clip suspenders to belt front and rear attachment points.
4. Adjust strap length evenly for desired fit.
5. Check all clips and loops for secure connection before use.

Occidental Leather 1546 Features

• Ultra-light industrial nylon construction with padded shoulders
• Even weight distribution for improved comfort
• Chest-height pockets for pencils or clip-on items
• Heavy duty spring clips for quick on/off
• Leather loop attachment system fits up to 3 inch tool belts
• Made in USA

Occidental Leather 1546 Applications

• Support and balance heavy tool belt loads
• Reduce back and hip strain during prolonged wear
• Hold small items at chest height for quick access
• Integrate with tool belts up to 3 inches wide
• Jobsite use for carpenters, electricians, and general trades

Occidental Leather 1546 Installation Overview

1. Slide your tool belt through the leather loop attachments.
2. Secure the heavy duty spring clips.
3. Adjust shoulder straps and back/front buckles for fit.
4. Fasten the chest strap.
5. Load tools and confirm balanced weight distribution.

High Mount Hammer Holder Key Features

• High-mount profile reduces hammer swing
• 10 oz full-grain belting leather construction
• Heavy-duty 2.5 inch steel loop fits most hammers
• Fits work belts up to 3 inches wide
• Compact, comfortable carry; Made in the USA

High Mount Hammer Holder Applications

• Framing and roofing tasks
• Overhead work and ladder use
• Tight-space maneuvering
• General jobsite tool belt organization

High Mount Hammer Holder Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position at preferred height for a high-mount carry.
3. Insert hammer through the 2.5 inch steel loop.
4. Verify secure fit and comfortable clearance while moving.

Occidental Leather 5509 Features

• Made in USA
• Fits up to a 3 in work belt
• Pre-riveted D ring loops for slip-on attachment
• Compatible with suspenders models 1546, 5009 and 5055

Occidental Leather 5509 Applications

• Add D ring attachment points to non-suspender belts
• Convert work belts to be suspenders-ready
• Replace or expand attachment loops on belts
• Set up multiple belts for quick suspender transfer

Occidental Leather 5509 Installation Overview

1. Slide each loop onto the belt and position evenly.
2. Align D rings at front and rear as preferred.
3. Attach suspender clips to the D rings.
4. Put on belt and adjust suspender length for comfort.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5522 Key Features

• 4-in-1 functionality for tape, pencil, crayon or screwdriver, plus sharp tools
• Full-grain American leather for long service life
• Free Oxy Tool Shield included for chisels, knives, cutters
• Belt-ready tunnel loop fits up to 3 in. belts
• Made in USA

Occidental Leather 5522 Applications

• On-belt organization for measuring and marking tools
• Carpentry and framing jobs requiring quick access to tape and pencil
• General construction and DIY tool carry
• Safe storage of sharp tools using the included shield

Occidental Leather 5522 Installation Overview

1. Slide the holder onto a belt up to 3 in. wide.
2. Seat the Oxy Tool Shield in the lower pocket.
3. Place tape measure in the main pocket.
4. Insert pencil and crayon or screwdriver in side sleeves.
5. Load sharp tools into the shield and verify secure fit.

Occidental Leather 5020 Key Features

• Two tools, one footprint for belt space efficiency
• Slides easily onto standard tool belts
• 12 oz English bridle leather construction for durability
• Purpose built for pros and DIY users
• Made in USA

Occidental Leather 5020 Applications

• Carry a hammer and pliers or similar hand tool at the ready
• Carpentry and framing work on site
• General construction and remodel tasks
• Workshop and home project tool carry

Occidental Leather 5020 Installation Overview

1. Thread the holder loop onto your work belt.
2. Position at the preferred hip location.
3. Insert hammer into the metal loop.
4. Place a hand tool into the leather pocket.
5. Check clearance and adjust belt position for comfort.

Key Features

• 0.75 in plus thick sheepskin pads for maximum cushioning
• Wool naturally insulates, cools, and wicks moisture
• Straps adjust to fit belts up to 3 in wide
• Premium leather outer for durability
• Made in USA

Applications

• Adds comfort and padding to tool or safety belts
• Reduces pressure points and edge bite during heavy loads
• Suitable for year-round jobsite wear
• Compatible with most 3 in wide work belts

Installation Overview

1. Loosen or remove your existing work belt.
2. Position the liner with sheepskin toward the body.
3. Thread or buckle the adjustable straps around the belt.
4. Tighten evenly; allow 1 to 2 in extra belt length.
5. Check fit and make final adjustments for comfort.

Occidental Leather 5055K Features

• Made in USA
• Assembly required
• Creates slip on D ring attachment points for belts
• Genuine leather components with included hardware
• Works with Occidental suspenders 1546, 5009 and 5055

Occidental Leather 5055K Applications

• Retrofit tool belts to accept suspenders
• Add extra D ring loops to existing belt sets
• Replace worn suspender loops

Occidental Leather 5055K Installation Overview

1. Plan loop locations on the belt and mark holes.
2. Position leather loop, dee clip and D ring as shown in instructions.
3. Secure using supplied rivet or screw post and washer; tighten firmly.
4. Peen rivet or snug screw post; trim any excess strap if needed.
5. Attach suspenders to installed D rings and check fit.

Occidental Leather 8062 Features

• 4 pouch layout with main, middle, outer, and upper bags
• 10 total pockets and tool holders
• Dedicated holders for blade square, angle square, cat's paw, and driver bits
• Streamlined profile for compact, efficient storage
• Designed to be worn on the left side for right handed users; left handed option available
• Made in USA

Occidental Leather 8062 Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry where compact, organized storage is preferred
• Keeping squares, bits, and cat's paw readily accessible on the non dominant side

Occidental Leather 5017DB Key Features

• Most popular layout without a tape pocket
• Double outer bags for added organization
• Holders for hammer, pencils, knife, crayon, chisel, torpedo level
• Right side wear for tools accessed with the right hand
• Available in left hand version as 5017DBLH
• Made in USA

Occidental Leather 5017DB Applications

• Organizing core hand tools on the jobsite
• Framing and general carpentry work
• Remodeling and installation tasks
• Trim and finish carpentry tool carry
• Daily use on professional work belts

Occidental Leather 5017DB Installation Overview

1. Slide the bag onto a work belt up to 3 inches wide.
2. Position on the right side for right hand access.
3. Load tools into main and outer pockets and holders.
4. Adjust placement for balance and comfort.
5. Securely fasten belt and verify easy access to tools.

Occidental Leather 5066 Features

• Premium full grain leather construction for long term durability
• Angled ergonomic design for improved balance and access
• Two built in holders for drill or driver bits
• Fits most cordless drills
• Available in right or left handed versions; left handed model 5066LH
• Made in the USA

Occidental Leather 5066 Applications

• Hands free carry of cordless drills on the jobsite
• Quick access drilling for framing and carpentry
• Tool organization for electricians and installers
• General construction and remodeling tasks

Occidental Leather 5066 Installation Overview

1. Slide holster onto your work belt at the preferred position.
2. Adjust placement for comfortable angled access.
3. Secure the retention strap snap if desired.
4. Insert drill fully; place bits in the dedicated holders.
5. Test movement to ensure secure, unobstructed access.

Occidental Leather 5500 Key Features

• All leather construction for durability
• 15 pockets and tool holders for everyday electrical tools
• Flashlight loop, electrical tape chain, and quick release tool snap
• Heavy duty hammer holder
• Tunnel loop mount fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5500 Applications

• Daily electrical service and installation
• Organized belt carry for screwdrivers, pliers, and testers
• Maintenance and facility repair work
• Remodeling and jobsite troubleshooting

Occidental Leather 5500 Installation Overview

1. Thread work belt through the tunnel loop; fits up to 3 in. width.
2. Load core tools into dedicated pockets and sleeves.
3. Attach small tools to the quick release snap as needed.
4. Hang electrical tape rolls on the chain for quick access.
5. Confirm balance and secure fit before use.

Occidental Leather 5137 Key Features

• High mount belt design for better mobility
• Extra Large fit for 35 ft FatMax style tape measures
• Premium durable leather construction
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5137 Applications

• Daily tape measure carry on tool belts
• Framing and layout tasks
• General carpentry and jobsite measuring

Occidental Leather 5137 Installation Overview

1. Slide holster onto a belt up to 3 in wide and position at desired height.
2. Insert tape measure into the holster with the base aligned to the cutout.
3. Confirm secure fit and accessibility before use.

Occidental Leather 5592 Features

• Go beltless with the 5055 Stronghold Suspension System
• Works with bags designed for a 3 inch belt
• Wide hangers provide stable bag support
• Made in USA

Occidental Leather 5592 Applications

• Convert a traditional belt rig to a beltless setup
• Customize tool bag layout for carpentry and construction
• Reduce waist bulk while maintaining bag capacity
• Integrate existing bags with a suspension system

Occidental Leather 5592 Installation Overview

1. Attach the Retro Tabs to the 5055 Stronghold Suspension System per manufacturer guidance.
2. Hang traditional bags that accept a 3 inch belt onto the tabs.
3. Adjust suspension straps for balanced load and comfort.
4. Verify all connections are secure before use.

Occidental Leather 5022 Key Features

• Top-grain leather construction for comfort and durability
• Non-marring surface helps prevent floor scuffs
• High-density padding with inner plastic shield minimizes pressure points
• Quick release fasteners for easy on and off
• Made in the USA

Occidental Leather 5022 Applications

• Interior remodeling and finish work
• Flooring installation without scuffing surfaces
• General jobsite knee protection

Occidental Leather 5022 Installation Overview

1. Place pads over knees with curved edge down.
2. Secure quick release buckles and straps.
3. Adjust for snug, comfortable fit; avoid overtightening.
4. Verify pads do not shift during movement.

Occidental Leather 9504 Key Features

• Cost efficient organization for small tools and fasteners
• Seven-pocket, multi-pouch design with holders for pencil, utility knife, and angle square
• Heavy-duty clip attaches quickly to belts or waistbands
• Fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9504 Applications

• Small repairs and punch list tasks
• Trim and finish work
• General maintenance rounds
• Weekend DIY projects

Occidental Leather 9504 Installation Overview

1. Load tools and fasteners into main and outer pockets.
2. Clip the pouch to your belt or waistband.
3. Ensure clip is fully engaged; adjust placement for comfort.

Key Features

• 12 pockets and tool holders in a compact, jobsite-efficient layout
• Two-ply foam-core construction maintains structure when empty or loaded
• Clip-on leather tab for tape or accessory pouches
• Steel hammer loop; interior leather tool sleeves
• Right-hand layout; left-hand model available as 9521LH

Applications

• Trim carpentry and finish work
• Light framing tasks
• Cabinetry and punch-list work
• Right-side tool carry for dominant-hand access

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for standard orientation.
3. Attach clip-on leather tab accessories as needed.
4. Insert the Oxy Tool Shield for chisels or knives.
5. Load tools and check balance and access.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather 6102 Key Features

• 9 total pockets and tool holders for finish essentials
• All-leather construction for durability
• Interior sleeves for pencil, knife, chisel, and lumber crayon
• Exterior tool snap clip and heavy-duty hammer loop
• Right-hand layout; worn on the right side
• Made in the USA

Occidental Leather 6102 Applications

• Trim and finish carpentry
• Cabinetry and installation work
• Light framing tasks
• Everyday carry for right-handed tool access

Occidental Leather 6102 Installation Overview

1. Slide pouch onto your work belt.
2. Position on the right side for optimal access.
3. Load primary tools into main and outer bags.
4. Place pencil, knife, chisel, and crayon in interior holders.
5. Secure hammer in loop and clip accessory to the tool snap.

Occidental Leather B8064 Features

• Patented 2-in-1 outer pouch with angle square holster
• Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
• Four-bag layout for layered storage
• Holds fasteners and tools commonly accessed with the left hand
• Made in USA

Occidental Leather B8064 Applications

• Framing: Keep nails, square, and layout tools organized
• General carpentry: Quick access to bits, nail sets, and cat's paw
• Layout work: Integrated angle square holster for fast measurement
• Jobsite organization: Layered pouches separate fasteners and small tools

Occidental Leather B8064 Installation Overview

1. Select right- or left-handed variant to match your setup.
2. Slide the bag onto a compatible work belt and secure.
3. Position fastener bag on the left side for right-handed users; right side for left-handed users.
4. Load fasteners and layout tools into the designated sleeves and pouches.
5. Verify comfortable reach and adjust placement as needed.

Occidental Leather 9085 Features

• Purpose-built tool organization in a compact case
• 18 pockets and tool holders for screwdrivers, chisels, bits, and more
• Leather-lined bottom enhances durability and shape retention
• Four rigid interior walls keep tools upright
• Includes 2 Oxy Tool Shields for sharp tool protection
• Made in the USA

Occidental Leather 9085 Applications

• Finish carpentry tool organization
• Plant engineering and maintenance kits
• On-the-go tool access for service professionals
• Upright storage for hand tools and accessories

Occidental Leather 9085 Installation Overview

1. Load tools into dedicated pockets and holders.
2. Place sharp tools in the included Oxy Tool Shields.
3. Attach the case securely to your work belt.
4. Arrange tools upright using interior dividers for quick access.