All Products

Occidental Leather 5055 Features

• Even load distribution for reduced hip and back fatigue
• Padded, contoured yoke lined with Dri-Lex for moisture wicking
• Chest pockets for pencils and clip-on items on both sides
• Easy on-off with adjustable chest strap
• Heavy-duty D-ring for hanging the rig
• One size fits most
• Made in USA

Occidental Leather 5055 Applications

• Support and stabilize loaded tool belts during long shifts
• Improve comfort and reduce strain for framing and carpentry work
• Keep suspenders and straps securely positioned while moving
• Hang up belt rig between tasks using center D-ring

Occidental Leather 5055 Installation Overview

1. Attach the leather loop connectors to your work belt (up to 3 in).
2. Clip the suspender straps to the belt loops.
3. Adjust the chest strap for a secure, comfortable fit.
4. Set strap lengths to distribute weight evenly across shoulders.
5. Confirm all connections are secure; D-ring is for hanging only.

Occidental Leather 5035 SM Key Features

• 3 in wide main belt for support
• 2 in leather tongue with steel roller buckle
• Premium 12-14 oz bridle leather construction
• Edge stitched for long-term durability
• Ideal foundation for tool and fastener bags
• Made in USA

Occidental Leather 5035 SM Applications

• Base belt for professional tool carry systems
• Construction and carpentry tool rigs
• Framing, finish work, and general trades
• Pairing with pouches, holsters, and fastener bags

Occidental Leather 5035 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. Thread tool bags and accessories onto the 2 in tongue/loop.
4. Buckle at the midpoint hole; adjust within the 4 in range each way.
5. Ensure comfortable fit over work clothing before use.

Occidental Leather 5009 Features

• Heavy duty bridle leather construction
• Large wool lined shoulder pads for comfort
• Spring clip attachment with loop hardware
• Fully adjustable straps
• Made in USA

Occidental Leather 5009 Applications

• Distribute tool belt weight for reduced strain
• Stabilize heavy tool rigs during carpentry or framing
• Attach to Occidental and other work belts using clips
• Comfort support for long jobsite days

Occidental Leather 5009 Installation Overview

1. Attach spring clips and loop hardware to your work belt.
2. Position suspenders so pads rest on shoulders.
3. Clip suspenders to belt front and rear attachment points.
4. Adjust strap length evenly for desired fit.
5. Check all clips and loops for secure connection before use.

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 5002 M Features

• Premium 12-14 oz bridle leather, custom tanned in the USA
• Edge stitched for durability and clean look
• Heavy duty 2 in steel roller buckle with nickel finish
• Slim 2 in width for compact tool bag setups
• Made in the USA

Occidental Leather 5002 M Applications

• Base belt for tool rigs and pouch systems
• Replacement belt for Occidental Leather setups
• Low profile carry for compact tool bags
• General jobsite wear requiring a durable work belt

Occidental Leather 5002 M Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the most used hole.
2. Select the size closest to that midpoint measurement.
3. If no belt to measure, add 4 in to pant waist for approximate midpoint.
4. Thread the buckle and secure at the midpoint hole; adjust as needed.

Occidental Leather 1546 Features

• Ultra-light industrial nylon construction with padded shoulders
• Even weight distribution for improved comfort
• Chest-height pockets for pencils or clip-on items
• Heavy duty spring clips for quick on/off
• Leather loop attachment system fits up to 3 inch tool belts
• Made in USA

Occidental Leather 1546 Applications

• Support and balance heavy tool belt loads
• Reduce back and hip strain during prolonged wear
• Hold small items at chest height for quick access
• Integrate with tool belts up to 3 inches wide
• Jobsite use for carpenters, electricians, and general trades

Occidental Leather 1546 Installation Overview

1. Slide your tool belt through the leather loop attachments.
2. Secure the heavy duty spring clips.
3. Adjust shoulder straps and back/front buckles for fit.
4. Fasten the chest strap.
5. Load tools and confirm balanced weight distribution.

Occidental Leather 8580M Features

• Hand-specific tool holder layout for efficient workflow
• Padded two-ply bags maintain shape when empty or loaded
• Extremely abrasion-resistant industrial nylon exterior
• Full leather boot with distinctive FatLip leather mouth
• 3 in HD Ranger belt with rear 2-in-1 tool and hammer holder
• Pockets and tool holders: 25
• Made in USA

Occidental Leather 8580M Applications

• Framing and production carpentry
• General carpentry and remodeling
• Jobsite organization for tools and fasteners
• Finish work requiring hand-specific pouch layout

Occidental Leather 8580M Installation Overview

1. Put on the belt over your typical work clothing and note the hole you use.
2. Remove the belt, lay it flat, and measure from the end of the buckle to that hole.
3. Select Medium if your measurement is near 37 in; adjust using the midpoint hole for fit.

High Mount Hammer Holder Key Features

• High-mount profile reduces hammer swing
• 10 oz full-grain belting leather construction
• Heavy-duty 2.5 inch steel loop fits most hammers
• Fits work belts up to 3 inches wide
• Compact, comfortable carry; Made in the USA

High Mount Hammer Holder Applications

• Framing and roofing tasks
• Overhead work and ladder use
• Tight-space maneuvering
• General jobsite tool belt organization

High Mount Hammer Holder Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position at preferred height for a high-mount carry.
3. Insert hammer through the 2.5 inch steel loop.
4. Verify secure fit and comfortable clearance while moving.

Occidental Leather 5509 Features

• Made in USA
• Fits up to a 3 in work belt
• Pre-riveted D ring loops for slip-on attachment
• Compatible with suspenders models 1546, 5009 and 5055

Occidental Leather 5509 Applications

• Add D ring attachment points to non-suspender belts
• Convert work belts to be suspenders-ready
• Replace or expand attachment loops on belts
• Set up multiple belts for quick suspender transfer

Occidental Leather 5509 Installation Overview

1. Slide each loop onto the belt and position evenly.
2. Align D rings at front and rear as preferred.
3. Attach suspender clips to the D rings.
4. Put on belt and adjust suspender length for comfort.

Occidental Leather 8581 Key Features

• FatLip leather mouth keeps the bag formed, open, and protected from abrasion
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated sleeves and pouches for tri-square, cat's paw, nail sets, and driver bits
• Accepts belts up to 3 in wide
• Made in the USA

Occidental Leather 8581 Applications

• Carrying nails, screws, and common fasteners
• Organization for angle square, tri-square, and layout tools
• Holstering cat's paw and driver bits for framing and drywall tasks
• General construction use on the non-dominant side

Occidental Leather 8581 Installation Overview

1. Slide the bag onto a work belt up to 3 in wide.
2. Wear on the left side for right-handed setups.
3. Load fasteners and tools into main and outer compartments.
4. Seat the angle square in the built-in holster and secure small bits in dedicated pouches.
5. Verify comfortable position and accessibility before work.

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 9850 Key Features

• FatLip leather mouth stays open and resists abrasion
• Main bags are 10 in deep with full leather boot
• Adjust-to-Fit belt for 32 in to 41 in waist sizes
• Rear 2-in-1 Tool and Hammer Holder
• Includes Oxy Tool Shield for sharp tool protection
• 24 total pockets and tool holders
• Crafted from high density neoprene, rugged nylon, and full grain leather
• Made in the USA

Occidental Leather 9850 Applications

• Carpentry and framing tool organization
• Remodeling and general construction tasks
• Jobsite fastener and hand tool carry
• Use with suspenders via preinstalled D-rings

Occidental Leather 9850 Installation Overview

1. Measure where you wear your tool belt to confirm size.
2. Adjust the belt to fit 32 in to 41 in waist range.
3. Position tool and fastener bags to your handed layout.
4. Attach the 2-in-1 holder and Oxy Tool Shield as desired.
5. Check D-rings and belt security before use.

Occidental Leather 2003 Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, diagonal cutter; plus one round pencil
• Lightweight, compact, and jobsite-ready
• Made in the USA

Occidental Leather 2003 Applications

• Safe storage of sharp edge tools on the belt or in bags
• Protecting tool pouches and clothing from blade damage
• Keeping a round pencil handy alongside primary tool
• Organizing chisels, knives, and cutters for quick access

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it to a tool bag edge or pocket.
2. Insert the primary tool into the main compartment.
3. Place a round pencil in the dedicated side slot.
4. Ensure the clip is fully seated and the tool is secure before use.

Occidental Leather 5062 Features

• 4 pouch layout for compact, expanded capacity
• 10 pockets and tool holders for fasteners and layout gear
• Tool-specific slots for blade square, angle square, driver bits, and cat's paw
• Full-grain leather construction for long-term durability
• Worn on the non-dominant side; available as left-hand 5062LH
• Made in the USA

Occidental Leather 5062 Applications

• Framing and general carpentry tool and fastener carry
• Organizing layout tools like blade and angle squares
• Quick access to driver bits, nail sets, and cat's paw
• Left-side fastener storage for right-handed users

Occidental Leather 5062 Installation Overview

1. Slide the pouch onto a 3 in belt or compatible work belt.
2. Position on the left side for right-handed use or select 5062LH for left-handed layout.
3. Load fasteners and tools into the four stacked compartments.
4. Place blade square and angle square in designated holders; store bits and cat's paw in slots.
5. Confirm secure fit and balanced carry before use.

Key Features

• Purpose built to fasten leather straps to the 5055 Suspender pad
• Simple, field-ready installation using Chicago screws
• Leather washers help protect and secure the strap connection
• Compact, lightweight kit for replacements or spares
• Made in USA

Applications

• Attach leather suspender straps to the 5055 pad
• Replace missing or worn hardware on the 5055 system
• Tighten or refresh existing strap connections

Installation Overview

1. Position strap and pad per the 5055 layout.
2. Align holes and place leather washer at the connection point.
3. Insert Chicago screw post through the pad and strap.
4. Thread and tighten the screw until secure; do not overtighten.
5. Repeat for the second connection and verify a snug, secure fit.

Occidental Leather 8089 LG Key Features

• Hand specific tool layout for efficient workflow
• Padded two ply bags maintain shape
• Extremely abrasion resistant industrial nylon body
• Leather tool holders and corner reinforcements
• 12 oz belting leather with steel roller buckle
• Pockets and tool holders: 22
• Weight: 4.1 lbs

Occidental Leather 8089 LG Applications

• Framing and general carpentry tool organization
• Jobsite fastener and hand tool carry
• Daily wear belt system for professional builders

Occidental Leather 8089 LG Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. If you do not have a belt, add 4 inches to pant waist to estimate mid range.
4. Adjust the 5035 belt using the roller buckle for a secure fit.

Occidental Leather 5012 Features

• Dual-layer 12 oz leather construction with steel hardware
• Plated steel rivets and stitched leather back for durability
• Reinforced steel loop accommodates most standard hammers
• Fits belts up to 3 inches wide
• Made in USA

Occidental Leather 5012 Applications

• Framing and general carpentry
• Roofing tasks requiring quick hammer access
• Sheet metal and rigging tool carry
• Daily construction work belt organization

Occidental Leather 5012 Installation Overview

1. Thread work belt through the two slots on the holder.
2. Position at preferred location on the belt.
3. Ensure the steel loop faces outward for easy tool access.
4. Insert hammer and check for secure, minimal movement.

Occidental Leather 5080DB-XL Key Features

• Premium top-grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand-specific layout supports natural workflow
• Copper-riveted reinforcement at stress points
• Built-in tape holster fits tapes up to 30 ft FatMax
• Made in USA

Occidental Leather 5080DB-XL Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Daily professional construction use

Occidental Leather 5080DB-XL Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm XL sizing.
2. Position tool bag on dominant hand side; fastener bag on opposite side.
3. Adjust belt to midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners; use NoSpill holders and tape holster as intended.
5. Re-check fit and balance before use.

Occidental Leather 8582 Key Features

• 10 in deep bag with full leather boot for structure and durability
• Leather FatLip mouth holds shape, stays open, and protects against abrasion
• Right-side layout for tools most accessed with the right hand
• 13 total pockets and holders for organized storage
• Made in the USA

Occidental Leather 8582 Applications

• Organizing and carrying hand tools on the jobsite
• Carpentry and framing tool storage
• General construction and remodeling
• Punch list and service work

Occidental Leather 8582 Installation Overview

1. Thread the pouch onto your work belt.
2. Wear on the right side for right-hand access.
3. Load tools into the dedicated pockets and holders.
4. Verify secure fit and balanced weight before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5520 Key Features

• 5-in-1 functionality — organize hammer, pliers, pencil, crayon or screwdriver, and a sharp tool
• Removable Oxy Tool Shield protects chisels, knives, and other sharp edges
• Full-grain American leather for long service life
• Space-efficient footprint on your belt
• Slides onto work belts up to 3 inches wide
• Made in the USA

Occidental Leather 5520 Applications

• Framing and general carpentry hand tool carry
• Electrical trim and service work
• Punch list and maintenance tasks
• Everyday belt carry for essential hand tools

Occidental Leather 5520 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position for preferred hand access on your belt system.
3. Load hammer, pliers, pencil, and crayon or screwdriver into the dedicated sleeves.
4. Insert chisels or knives into the removable Oxy Tool Shield.
5. Check fasteners and leather for secure fit before use.

Occidental Leather 5037 Key Features

• High mount design keeps tape measure secure and accessible
• Top grain leather construction for durability
• Holds up to a 35 ft tape or FatMax
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5037 Applications

• Carrying and securing a tape measure on a work belt
• Framing, carpentry, and general construction tasks
• Remodeling and finish work where fast tape access is needed

Occidental Leather 5037 Installation Overview

1. Thread the holder onto your work belt (up to 3 in wide).
2. Position at preferred height for access.
3. Insert tape measure into pocket with clip facing outward.
4. Verify snug fit and comfortable reach before use.

Occidental Leather 5018DB Features

• 11 total pockets and tool holders for efficient organization
• Integrated tape holster fits tapes up to a 35 ft FatMax
• Hammer loop for quick access
• Premium leather construction, made in USA
• Right-side wear for dominant hand access; left-hand version available

Occidental Leather 5018DB Applications

• General carpentry and framing tool organization
• Finish work where frequent tool access is required
• Jobsite carry for measuring, marking, and cutting tools

Occidental Leather 5018DB Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Position on the right side for dominant hand access.
3. Secure the tape, hammer, and hand tools in designated holders.
4. Confirm balance and adjust placement for comfort.

Occidental Leather 5522 Key Features

• 4-in-1 functionality for tape, pencil, crayon or screwdriver, plus sharp tools
• Full-grain American leather for long service life
• Free Oxy Tool Shield included for chisels, knives, cutters
• Belt-ready tunnel loop fits up to 3 in. belts
• Made in USA

Occidental Leather 5522 Applications

• On-belt organization for measuring and marking tools
• Carpentry and framing jobs requiring quick access to tape and pencil
• General construction and DIY tool carry
• Safe storage of sharp tools using the included shield

Occidental Leather 5522 Installation Overview

1. Slide the holder onto a belt up to 3 in. wide.
2. Seat the Oxy Tool Shield in the lower pocket.
3. Place tape measure in the main pocket.
4. Insert pencil and crayon or screwdriver in side sleeves.
5. Load sharp tools into the shield and verify secure fit.