Occidental Leather Tool Belt Systems

Occidental Leather 8089 LG Key Features

• Hand specific tool layout for efficient workflow
• Padded two ply bags maintain shape
• Extremely abrasion resistant industrial nylon body
• Leather tool holders and corner reinforcements
• 12 oz belting leather with steel roller buckle
• Pockets and tool holders: 22
• Weight: 4.1 lbs

Occidental Leather 8089 LG Applications

• Framing and general carpentry tool organization
• Jobsite fastener and hand tool carry
• Daily wear belt system for professional builders

Occidental Leather 8089 LG Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. If you do not have a belt, add 4 inches to pant waist to estimate mid range.
4. Adjust the 5035 belt using the roller buckle for a secure fit.

Occidental Leather 5080DB-XL Key Features

• Premium top-grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand-specific layout supports natural workflow
• Copper-riveted reinforcement at stress points
• Built-in tape holster fits tapes up to 30 ft FatMax
• Made in USA

Occidental Leather 5080DB-XL Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Daily professional construction use

Occidental Leather 5080DB-XL Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm XL sizing.
2. Position tool bag on dominant hand side; fastener bag on opposite side.
3. Adjust belt to midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners; use NoSpill holders and tape holster as intended.
5. Re-check fit and balance before use.

Occidental Leather 5080LG Key Features

• Premium top grain leather construction
• Hand specific tool holders for working rhythm
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders
• Left handed option available as 5080LH
• Made in USA

Occidental Leather 5080LG Applications

• Framing and general carpentry tool carry
• On site construction and renovation
• Efficient organization of fasteners and hand tools
• Daily use by professional builders

Occidental Leather 5080LG Installation Overview

1. Place belt over typical work clothing where it will be worn.
2. Measure from the buckle to the hole you use most.
3. Select the belt size mid range closest to that measurement.
4. Adjust using the 9 holes and position bags and holders as preferred.

Occidental Leather 9525XXL Key Features

• 25 pockets and tool holders
• Round bottom, full capacity bags maintain shape
• Includes 2003 Oxy Tool Shield
• Hand specific tool layout for work rhythm
• 12 oz belting leather with steel roller buckle and padded nylon belt

Occidental Leather 9525XXL Applications

• Trim installation and finish carpentry
• Light framing and punch list tasks
• Cabinet, door, and window setting
• General tool carry and organization on site

Occidental Leather 9525XXL Installation Overview

1. Measure existing belt from buckle to the hole used to determine belt size.
2. Adjust the work belt so pouches ride at a comfortable height.
3. Place fastener bag on left and tool bag on right for standard layout.
4. Attach Oxy Tool Shield and 2-in-1 holder to preferred positions.
5. Load tools and confirm balance and comfort before use.

Occidental Leather 9855 Key Features

• FatLip bag mouth stays open and resists abrasion
• Main bags 10 in deep with full leather boot
• Adjust-to-Fit belt fits 32 in to 41 in waist sizes
• D rings pre installed for suspension system compatibility
• Includes rear 2 in 1 Tool and Hammer Holder and Oxy Tool Shield
• 24 total pockets and tool holders
• Made in USA

Occidental Leather 9855 Applications

• Carry and organize hand tools, fasteners, and accessories on the jobsite
• Framing and general carpentry tasks
• Remodeling and punch list work requiring frequent tool access
• Use with suspension systems for added support

Occidental Leather 9855 Installation Overview

1. Measure where you wear your tool belt and select the Adjust to Fit range accordingly.
2. Place belt over work clothing and buckle at a comfortable midpoint hole.
3. Adjust belt tabs to fit 32 in to 41 in waist sizes.
4. Position tool and fastener bags on preferred sides and secure.
5. Attach the 2 in 1 holder and Oxy Tool Shield; add suspenders to D rings if desired.

Occidental Leather 5191 M Features

• Unique one-piece toolbelt assembly for balanced load
• Premium top-grain leather construction
• Sheepskin-lined interior for comfort
• Hand-specific tool holders with NoSpill system
• Copper-riveted main bags for durability
• Function-engineered layout based on 5060 and 5018 bags
• Made in USA

Occidental Leather 5191 M Applications

• Framing and general carpentry tool organization
• Remodeling projects requiring quick tool access
• Finish and trim work with hand-specific layout
• Jobsite setups needing secure, no-spill holders
• Daily professional use in demanding outdoor conditions

Occidental Leather 5191 M Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove and lay belt flat; measure from buckle end to the used hole.
3. Match measurement to size chart; select Medium if midpoint is 37 in.
4. Adjust fit using the midpoint hole with 4 in range each way.

Occidental Leather 5590M Key Features

• Hand-specific layout promotes efficient workflow
• NoSpill leather holders for secure, form-fit tool retention
• 37 pockets and holders for full jobsite loadouts
• Rugged leather build with select industrial nylon components
• Made in USA

Occidental Leather 5590M Applications

• Commercial electrical installation and service
• Tool and fastener organization on the jobsite
• Journeyman-level daily use
• General maintenance and troubleshooting

Occidental Leather 5590M Installation Overview

1. Measure from belt buckle end to the hole you use on your current tool belt.
2. Select the medium size if your measurement aligns with 37 in midpoint.
3. Position tool bags for hand-specific workflow.
4. Secure hammer holder and accessories to the belt.
5. Load tools and adjust fit for comfort.

Occidental Leather 5530 XL Features

• Round bottom full-capacity leather bags for greater storage and wear
• Premium top-grain leather with heritage-quality construction
• Hand-specific NoSpill tool holder system
• 3 in English bridle leather belt with steel roller buckle
• Pockets and tool holders: 28
• Includes Oxy Tool Shield and 2-in-1 tool and hammer holder
• Belt size: XL

Occidental Leather 5530 XL Applications

• Framing and rough carpentry tool carry
• Trim carpentry and finish work organization
• General construction and remodeling
• On-belt storage for measuring, cutting, and fastening tools
• Daily professional jobsite use

Occidental Leather 5530 XL Installation Overview

1. Size the belt to XL fit and fasten the steel roller buckle.
2. Slide tool and fastener bags onto the belt and position as preferred.
3. Attach the 2-in-1 tool and hammer holder and Oxy Tool Shield to the belt or bag loops.
4. Load tools into hand-specific pockets to prevent spills.
5. Adjust belt and bag placement for balance and comfort.

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.

Occidental Leather 9596 Key Features

• All-leather construction built for commercial electricians
• Adjust-to-Fit belt fits 32 to 40 inch pant waists
• NoSpill leather holders help prevent tool drops
• Hand-specific layout for fast, efficient access
• Balanced design for all-day comfort
• Made in the USA

Occidental Leather 9596 Applications

• Electrical install and service tasks
• Rough-in and finish wiring work
• Panel, fixture, and device installation
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use.
2. Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
3. Position pouches and holders for hand-specific access.
4. Cinch belt to a comfortable, balanced fit and verify tool retention.

Occidental Leather B5080DB LG Features

• 22 pockets and tool holders
• Premium top grain leather construction
• Hand Specific tool holder placement for efficient workflow
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders

Key Features

• Hand-specific tool holders for efficient access
• Padded two-ply, foam-core bags maintain shape
• Abrasion-resistant industrial nylon construction
• Adjust-to-Fit belt allows quick sizing changes
• D-rings pre-installed for suspension system compatibility
• Left-handed model available as 9540LH
• Made in USA

Applications

• Finish carpentry setups
• Trim installation
• Light framing tasks
• General jobsite tool and fastener organization

Installation Overview

1. Adjust belt to fit over typical work clothing.
2. Position left fastener and right tool bags for reach preference.
3. Attach the high mount hammer holder at the center back.
4. Clip Oxy Tool Shields to bags or belt as needed.
5. Load tools and fasteners evenly; connect suspenders to D-rings if used.

Occidental Leather 5036SM Key Features

• Premium top grain leather tool bags
• 12 oz belting leather belt with steel roller buckle
• NoSpill tool holder system keeps tools upright
• Hand specific organization engineered for electricians
• Made in USA

Occidental Leather 5036SM Applications

• Electrical install and service work
• Wire termination and panel assembly
• Commercial and residential troubleshooting
• Tool and fastener organization on the jobsite

Occidental Leather 5036SM Installation Overview

1. Measure an existing work belt from buckle end to the most used hole to find belt size.
2. Wear over normal work clothes and note the hole used for fastening.
3. Select Small size if your measured midpoint is about 34 in.
4. Assemble components on the belt in your preferred hand specific layout.

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 9550 Key Features

• Premium top-grain leather bags with copper-riveted stress points
• Adjust-to-Fit belt for pant waist 32 to 41; locks securely in place
• Rugged commercial nylon belt with high-density neoprene padding
• D rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• Fixed-position bags help prevent shifting
• Made in USA

Occidental Leather 9550 Applications

• Framing and rough carpentry
• General residential and commercial construction
• Remodeling and jobsite service work
• Tool and fastener organization on the go
• Use with suspension systems for extended wear

Occidental Leather 9550 Installation Overview

1. Adjust belt to your pant waist size (32 to 41) and secure the crossover system.
2. Position the tool bag on your dominant side and fastener bag opposite.
3. Attach the removable High Mount Hammer Holder on the rear as desired.
4. Clip suspension system to pre-installed D rings if used.
5. Load tools and fasteners; confirm bags sit securely without shifting.

Occidental Leather 8080DB XXL Key Features

• 21 pockets and tool holders
• Hand specific tool holder layout
• Padded two ply nylon bags maintain structure
• Abrasion resistant industrial nylon
• Leather tool holders and corner reinforcement
• Made in USA

Occidental Leather 8080DB XXL Applications

• Framing tasks and general carpentry
• Organizing and carrying essential jobsite tools and fasteners
• Efficient workflow with hand specific pouch layout

Occidental Leather 8080DB XXL Installation Overview

1. Size the Ranger Work Belt to your belt measurement and secure at a comfortable hole.
2. Attach tool and fastener bags and the hammer holder to the belt.
3. Load tools and fasteners into hand specific pockets for your workflow.
4. Check balance and adjust bag positions for comfort and access.

Occidental Leather B8080DBSM Key Features

• Hand-specific tool holder layout for efficient workflow
• Double-wall padded nylon bags maintain structure
• Abrasion-resistant industrial nylon construction
• 12 oz belting leather belt with steel roller buckle
• Leather-reinforced corners and tool holders

Occidental Leather B8080DBSM Applications

• Framing and rough carpentry
• General construction tool carry
• Jobsite fastener and tool organization

Occidental Leather B8080DBSM Installation Overview

1. Measure belt fit from buckle end to your most used hole to confirm size.
2. Attach both outer bags to the belt in your preferred handed layout.
3. Secure the hammer holder at rear center and tighten belt at midpoint hole.
4. Load tools and fasteners; adjust pouch positions for balance and access.
5. Verify all rivets, snaps, and holders are seated before use.

Occidental Leather 8086SM Key Features

• Hand specific tool holders for optimized workflow
• Padded two ply bags that hold their shape
• Industrial nylon construction with leather reinforced corners
• Patented 2 in 1 outer pouch on fastener bag for compact organization
• Available in right or left hand layouts
• Made in USA

Occidental Leather 8086SM Applications

• Framing and rough carpentry setups
• General construction tool and fastener organization
• Jobsite tasks requiring quick access to hand tools
• Production carpentry where lighter weight gear is preferred

Occidental Leather 8086SM Installation Overview

1. Measure your current tool belt from buckle end to the commonly used hole to confirm size Small.
2. Adjust the 5035 Ranger belt to the midpoint hole for proper fit.
3. Slide the B8017DB tool bag and B8064 fastener bag onto the belt in your preferred layout.
4. Attach the 5059 hammer holder at the rear center or your preferred position.
5. Load tools and fasteners, ensuring even weight distribution.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather 9525LHM Key Features

• 25 pockets and tool holders
• Innovative round-bottom, full-capacity tool bags
• Includes 2003 Oxy Tool Shield in each bag
• Hand-specific tool holder layout for left-handed users
• Engineered for trim, finish, and light framing tasks
• 12 oz belting leather with steel roller buckle and padded nylon 3 inch work belt

Occidental Leather 9525LHM Applications

• Trim carpentry and punch list work
• Finish carpentry and cabinet install
• Light framing and layout
• General tool organization on the jobsite

Occidental Leather 9525LHM Installation Overview

1. Measure an existing belt you wear over work clothes to find belt size.
2. Buckle the belt on your waist where it will be worn and note the hole used.
3. Measure from the buckle to that hole; select the belt size that matches.
4. Position tool and fastener bags for a left-handed layout; secure holders.
5. Load tools and check balance and fit; adjust for comfort.

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.

Occidental Leather 5080DBM Key Features

• Premium top?grain leather construction
• Hand?specific tool layout for natural workflow
• NoSpill tool holder system keeps tools secure
• Copper?riveted stress points for long service life
• Engineered for modern builders; Made in USA

Occidental Leather 5080DBM Applications

• Framing and rough carpentry
• General construction and remodeling
• Deck building and exterior projects
• Jobsite tool and fastener organization
• Roofing layout and install tasks

Occidental Leather 5080DBM Installation Overview

1. Measure your existing tool belt from buckle end to the commonly used hole to confirm Medium size.
2. Thread the tool and fastener bags onto the belt in a hand?specific layout.
3. Adjust belt to a comfortable, balanced fit at the midpoint hole.
4. Load essential tools and fasteners, using NoSpill holders for security.
5. Verify clear access to primary tools and make final fit adjustments.

Occidental Leather 5087 SM Key Features

• Premium top grain leather construction
• Hand-specific tool holders for an efficient working rhythm
• Copper rivets reinforce primary bags
• NoSpill tool holder system keeps tools secure
• Function engineered for the modern builder
• Left-handed option available as 5087LH

Occidental Leather 5087 SM Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite tool organization

Occidental Leather 5087 SM Installation Overview

1. Measure your current belt from buckle to most-used hole to select size.
2. Adjust the belt to fit over typical work clothing.
3. Arrange tape holder on the left and position bags for dominant hand use.
4. Secure hammer holder and load tools into designated pockets.
5. Check comfort and balance; re-adjust as needed.

Occidental Leather 5080LG Key Features

• Premium top grain leather construction
• Hand specific tool holders for working rhythm
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders
• Left handed option available as 5080LH
• Made in USA

Occidental Leather 5080LG Applications

• Framing and general carpentry tool carry
• On site construction and renovation
• Efficient organization of fasteners and hand tools
• Daily use by professional builders

Occidental Leather 5080LG Installation Overview

1. Place belt over typical work clothing where it will be worn.
2. Measure from the buckle to the hole you use most.
3. Select the belt size mid range closest to that measurement.
4. Adjust using the 9 holes and position bags and holders as preferred.