Sort by:
Occidental Leather 9525LHM Description
Left-handed Finisher tool belt system built for trim, finish, and light framing. Hand-specific tool placement, round-bottom bags that hold their shape, and a padded 3 inch work belt deliver comfort and efficiency. Includes Oxy Tool Shield protection in each bag and a 2-in-1 Tool and Hammer Holder.
Occidental Leather 9525LHM Includes
- (1) 3 inch Leather and Nylon Work Belt
- (1) OxyFinisher Fastener Bag
- (1) 2-in-1 Tool and Hammer Holder
- (1) OxyFinisher Tool Bag
Occidental Leather 9525LHM Key Features
- 25 pockets and tool holders
- Innovative round-bottom, full-capacity tool bags
- Includes 2003 Oxy Tool Shield in each bag
- Hand-specific tool holder layout for left-handed users
- Engineered for trim, finish, and light framing tasks
- 12 oz belting leather with steel roller buckle and padded nylon 3 inch work belt
Occidental Leather 9525LHM Applications
- Trim carpentry and punch list work
- Finish carpentry and cabinet install
- Light framing and layout
- General tool organization on the jobsite
Occidental Leather 9525LHM Installation Overview
- Measure an existing belt you wear over work clothes to find belt size.
- Buckle the belt on your waist where it will be worn and note the hole used.
- Measure from the buckle to that hole; select the belt size that matches.
- Position tool and fastener bags for a left-handed layout; secure holders.
- Load tools and check balance and fit; adjust for comfort.
Occidental Leather 9525LHM Specifications
| Pockets and Holders | 25 |
| Belt Size | Medium |
| Weight | 3.1 lbs |
| Material | Leather, Nylon |
| Color | Black, Tan |
| Hand | Left |
Occidental Leather 8585XL Description
A production carpenter focused belt set with 10 in deep bags, a full leather boot, and a distinctive FatLip leather bag mouth that keeps pockets formed, open, and resistant to abrasion. Extra Large size.
Occidental Leather 8585XL Includes
- (1) 8585XL Heritage FatLip Tool Bag Set
- (1) Belt
- (2) Bags
- (1) Hammer Holder
Occidental Leather 8585XL Key Features
- Hand specific tool holders for efficient layout
- Padded two ply tool bags hold their shape
- Industrial nylon is highly abrasion resistant
- Leather tool holders with leather reinforced corners
- Available left handed as model 8585LH
Occidental Leather 8585XL Applications
- Carpentry and framing setups
- General construction tool carry
- Remodeling and jobsite installation work
Occidental Leather 8585XL Installation Overview
- Lay your current belt flat; measure from buckle end to most used hole.
- Select the Extra Large size closest to that mid range measurement.
- Position bags and holders to preferred left or right layout.
- Secure buckle and adjust for a snug, supportive fit.
Occidental Leather 8585XL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Extra Large |
| Bag Depth | 10 in |
| Materials | Leather and industrial nylon |
| Weight | 5.2 lbs |
Occidental Leather 5080DBM Description
The Medium Pro Framer Set with Double Outer Bag is built from premium top?grain leather with hand?specific tool holders and the NoSpill system for efficient, secure carry. This durable, USA?made rig delivers 22 total pockets and holders and is tuned for professional framing performance. Left?handed version available as 5080DBLH.
Occidental Leather 5080DBM Includes
- (1) 5080DBM Pro Framer Tool Belt Set
- (1) Belt
- (2) Bags
- (1) Hammer Holder
Occidental Leather 5080DBM Key Features
- Premium top?grain leather construction
- Hand?specific tool layout for natural workflow
- NoSpill tool holder system keeps tools secure
- Copper?riveted stress points for long service life
- Engineered for modern builders; Made in USA
Occidental Leather 5080DBM Applications
- Framing and rough carpentry
- General construction and remodeling
- Deck building and exterior projects
- Jobsite tool and fastener organization
- Roofing layout and install tasks
Occidental Leather 5080DBM Installation Overview
- Measure your existing tool belt from buckle end to the commonly used hole to confirm Medium size.
- Thread the tool and fastener bags onto the belt in a hand?specific layout.
- Adjust belt to a comfortable, balanced fit at the midpoint hole.
- Load essential tools and fasteners, using NoSpill holders for security.
- Verify clear access to primary tools and make final fit adjustments.
Occidental Leather 5080DBM Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | Medium |
| Material | Premium top?grain leather |
| Weight | 5.4 lbs |
| Made In | USA |
| Left?Handed Version | 5080DBLH |
NOTE: Size by measuring your tool belt length, not pant waist, for the best fit.
Occidental Leather 5191XL Description
The Extra Large Pro Carpenter's 5 Bag Assembly is a one-piece buscadero-style leather belt system designed to distribute weight evenly and conform to the body. Built with premium top-grain leather, hand-specific tool holders, copper-riveted stress points, and a NoSpill tool holder system. Sheepskin lining enhances long-wear comfort. Made in USA.
Occidental Leather 5191XL Includes
- (1) 5191XL Pro Carpenter's 5 Bag Assembly
- (1) Belt Assembly
Occidental Leather 5191XL Key Features
- Unique one-piece tool belt assembly for balanced load distribution
- Premium top-grain leather construction
- Hand-specific tool holders for efficient workflow
- Copper-riveted main bags for durability
- NoSpill tool holder system keeps tools secure
- Sheepskin-lined interior for comfort
- Made in USA
- Not available as left-hand model; suggested 9550LH
Occidental Leather 5191XL Applications
- Framing and general carpentry
- Remodeling and residential construction
- Jobsite tool organization and carry
- Finish carpentry tool layout
Occidental Leather 5191XL Installation Overview
- Put the belt on over typical work clothing and note the hole used.
- Remove the belt and measure from the buckle end to that hole to confirm size.
- Adjust fit using midpoint hole; 4 inches of adjustment each way.
- Load tools into hand-specific holders; secure sharp tools in dedicated holsters.
- Verify balanced weight before use.
Occidental Leather 5191XL Specifications
| Pockets & Tool Holders | 22 |
| Size | Extra Large |
| Material | Premium Top-Grain Leather |
| Belt Style | One-piece buscadero |
| Lining | Sheepskin |
| Country of Origin | USA |
Occidental Leather 5087 SM Description
The 5087 SM Small Framing Set is built for carpenters who prefer the tape holder on the left side. Constructed from premium top grain leather with hand-specific tool holders, copper-riveted main bags, and the NoSpill tool holder system for secure, efficient workflow.
Occidental Leather 5087 SM Includes
- (1) Belt
- (2) Bags
- (1) Hammer Holder
Occidental Leather 5087 SM Key Features
- Premium top grain leather construction
- Hand-specific tool holders for an efficient working rhythm
- Copper rivets reinforce primary bags
- NoSpill tool holder system keeps tools secure
- Function engineered for the modern builder
- Left-handed option available as 5087LH
Occidental Leather 5087 SM Applications
- Framing and rough carpentry
- General construction and remodeling
- Jobsite tool organization
Occidental Leather 5087 SM Installation Overview
- Measure your current belt from buckle to most-used hole to select size.
- Adjust the belt to fit over typical work clothing.
- Arrange tape holder on the left and position bags for dominant hand use.
- Secure hammer holder and load tools into designated pockets.
- Check comfort and balance; re-adjust as needed.
Occidental Leather 5087 SM Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | Small |
| Material | Premium top grain leather |
| Color | Brown |
| Weight | 5.4 lbs |
Occidental Leather 5080LG Description
The Large Pro Framer Set is a premium top grain leather tool belt system engineered for efficiency and comfort. Hand specific holders and the NoSpill system keep tools organized and accessible, with copper rivet reinforcement for long lasting durability.
Occidental Leather 5080LG Includes
- (1) 5080LG Pro Framer Set
- (1) Belt
- (2) Bags
- (1) Hammer Holder
Occidental Leather 5080LG Key Features
- Premium top grain leather construction
- Hand specific tool holders for working rhythm
- Copper rivets reinforce main bags
- NoSpill tool holder system
- Function engineered for modern builders
- Left handed option available as 5080LH
- Made in USA
Occidental Leather 5080LG Applications
- Framing and general carpentry tool carry
- On site construction and renovation
- Efficient organization of fasteners and hand tools
- Daily use by professional builders
Occidental Leather 5080LG Installation Overview
- Place belt over typical work clothing where it will be worn.
- Measure from the buckle to the hole you use most.
- Select the belt size mid range closest to that measurement.
- Adjust using the 9 holes and position bags and holders as preferred.
Occidental Leather 5080LG Specifications
| Material | Premium top grain leather |
| Pockets and Tool Holders | 21 |
| Belt Size | Large |
| Weight | 5.4 lbs |
| Manufacturer Part Number | 5080 LG |
| UPC | 759244017106 |
| Assembled Dimensions | 12.00 x 6.00 x 18.00 in |
NOTE: If you do not have a belt to measure, add 4 in to your pant waist size to approximate the mid range belt size.
Occidental Leather 8071 Description
The 8071 Beltless Back Strap is a replacement strap designed specifically for the 5592 Beltless Retro Kit. Built for durability and easy attachment, it restores proper function and bag swing to your Beltless system.
Occidental Leather 8071 Includes
- (1) Beltless Back Strap
Occidental Leather 8071 Key Features
- Back strap ONLY for the 5592 Beltless Retro Kit
- Heavy duty construction for long service life
- Made in USA
- Simple, tool free attachment to Beltless system
Occidental Leather 8071 Applications
- Replace worn or damaged back strap on Beltless Retro Kit
- Maintain proper support and balance of Beltless system
- Improve bag movement and accessibility on Beltless setup
Occidental Leather 8071 Installation Overview
- Detach the existing back strap from the Beltless Retro Kit loops.
- Feed the new strap through the attachment points on both bags.
- Secure ends and center buckle, ensuring even alignment.
- Adjust strap tension for desired bag swing and comfort.
- Confirm all connections are tight before use.
Occidental Leather 8071 Specifications
| Model | 8071 |
| Compatibility | 5592 Beltless Retro Kit |
| UPC | 759244145502 |
| Origin | USA |
Occidental Leather 8585M Description
A medium Heritage FatLip tool belt set built for production carpenters. Ten inch deep bags feature a full leather boot and a leather FatLip mouth that helps the bag stay open and resist abrasion. Hand specific organization and padded two ply construction maintain shape and durability. Made in USA.
Occidental Leather 8585M Includes
- (1) 3 in. Ranger Work Belt #5035
- (1) Heritage FatLip Fastener Bag #8583
- (1) Heritage FatLip Tool Bag #8584
- (1) 2-in-1 Hammer Holder #5020
Occidental Leather 8585M Key Features
- Hand specific tool holders for efficient layout
- Padded two ply bags hold shape under load
- Industrial nylon with leather holders and reinforced corners
- Leather FatLip mouth keeps the bag formed and protected
- Full leather boot for rugged wear
- Left handed version available as 8585LH
- Made in USA
Occidental Leather 8585M Applications
- Carpentry and framing tool organization
- Jobsite fastener and small parts carry
- Daily use for production builders
- General construction tool storage
- Remodeling and trim work setups
Occidental Leather 8585M Installation Overview
- Lay your current belt flat and measure from buckle end to your most used hole.
- Select Medium if the mid range near 37 in. matches your measurement.
- Adjust using the 9 holes to fine tune fit across 4 in. of range each way.
- Attach bags and hammer holder to preferred positions.
- Load tools and confirm balance and comfort before use.
Occidental Leather 8585M Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Medium |
| Belt Type | 3 in. Ranger Work Belt |
| Main Bag Depth | 10 in. |
| Material | Industrial nylon with leather reinforcements |
| Weight | 5.0 lb |
| Mid Range (Medium) | 37 in. |
| Adjustment Holes | 9 |
| Country of Origin | USA |
Occidental Leather 5135 XXL Description
Handcrafted in the USA from 12-14 oz OX Red Latigo leather with a sweat wicking wool liner, this 5 in. work belt adds support and comfort all day. Equipped with a 2 in. all leather overbelt and belt loops to keep tool bags secure. Nickel plated steel buckles and suspender loops. Edge stitched for durability and a clean finish.
Occidental Leather 5135 XXL Includes
- (1) Tool Belt
Occidental Leather 5135 XXL Key Features
- 5 in. wide belt for enhanced back support
- Built-in suspender attachment loops
- Thick padded wool liner for comfort and moisture control
- Heavy duty buckles and belt loops minimize bag sliding
- Edge stitched leather for added strength
Occidental Leather 5135 XXL Applications
- Securely carry tool bags and pouches
- Provide back support during long workdays
- Use with suspenders for balanced load distribution
- Carpentry, framing, and general construction tasks
- Comfortable wear over layered work clothing
Occidental Leather 5135 XXL Installation Overview
- Measure your current tool belt from buckle end to the hole you use.
- Select size based on midpoint measurement; size up if between.
- Wear over typical work clothing and fasten at the midpoint hole.
- Attach tool bags to the overbelt loops; tighten to prevent sliding.
- Clip suspenders to built-in loops for added support if needed.
Occidental Leather 5135 XXL Specifications
| Size | XXL |
| Belt Width | 5 in. |
| Overbelt Width | 2 in. |
| Liner | Padded wool |
| Material | Leather |
| Hardware | Nickel plated steel |
| Color | Brown, Tan |
| Weight | 5.4 lbs |
| Country of Manufacture | USA |
Occidental Leather 8080DBLH XXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLH XXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLH XXL Description
Leather and industrial nylon combine to reduce weight while delivering durability in this left-handed OxyLights Framer Set with double outer bags. Hand-specific leather holders help prevent spills and keep tools accessible. Main bag corners feature OxyRed leather reinforcement for long service life. Made in USA.
Occidental Leather 8080DBLH XXL Includes
- (1) HD 3" Ranger Work Belt
- (1) OxyLights 3 Pouch Pro Tool Bag with Tape Holder (R8018DB)
- (1) OxyLights 3 Pouch Pro Fastener Bag (R8060)
- (1) Hammer Holder (B5012)
Occidental Leather 8080DBLH XXL Key Features
- 20 pockets and tool holders
- Hand-specific leather tool holders for efficient workflow
- Padded two-ply nylon bags maintain shape
- Industrial nylon with leather corner reinforcement for abrasion resistance
- Made in USA
Occidental Leather 8080DBLH XXL Applications
- Framing and general carpentry tool organization
- Jobsite fastener and tool carrying
- Left-handed workflows requiring hand-specific layout
Occidental Leather 8080DBLH XXL Installation Overview
- Measure and select the correct XXL belt size.
- Slide tool and fastener bags onto the Ranger belt.
- Attach the hammer holder at the rear center slot.
- Adjust belt to preferred hole and secure fit over work clothing.
- Load tools and fasteners; verify balanced, left-handed layout.
Occidental Leather 8080DBLH XXL Specifications
| Pockets & Tool Holders | 20 |
| Belt Size | XXL |
| Weight | 3.8 lbs |
| Material | Leather |
| Color | Green, Tan |
| Handedness | Left handed |
| Components | R8018DB Tool Bag; R8060 Fastener Bag; B5012 Hammer Holder; B5035 Ranger Work Belt |
Occidental Leather 9515LH Description
Left handed Adjust-to-Fit OxyLight framer belt set featuring classic B8017DB tool bag and patented B8064 fastener bag on a comfortable, adjustable belt. Rugged commercial nylon with high-density neoprene padding and leather reinforcements. Fits 32 in to 41 in pant waists and includes a removable high mount hammer holder.
Occidental Leather 9515LH Includes
- (1) 9515LH Adjust-to-Fit OxyLight Framer Set
- (1) Belt Assembly
- (1) Hammer Holder
Occidental Leather 9515LH Key Features
- Fully adjustable for 32 in to 41 in pant waists; ideal for seasonal clothing changes
- D-rings pre-installed for use with suspension systems
- Hand-specific, left-handed layout promotes efficient workflow
- Padded two-ply bags keep their shape
- Extremely abrasion-resistant industrial nylon with leather corner reinforcement
- Removable High Mount Hammer Holder 5059 on rear
- Made in USA
Occidental Leather 9515LH Applications
- Framing and rough carpentry setups
- General construction and remodeling tool carry
- Jobsite organization for left-handed pros
- Use with suspenders via integrated D-rings
Occidental Leather 9515LH Installation Overview
- Adjust belt to fit 32 in to 41 in pant size using the buckle and crossover system.
- Position bags and hammer holder to preferred left-handed layout.
- Secure D-rings to suspenders if desired.
- Load tools and fasteners; verify bags are balanced and secure.
Occidental Leather 9515LH Specifications
| Pockets and Tool Holders | 21 |
| Pant Waist Range | 32 in to 41 in |
| Belt Length Range | 35 in to 45 in |
| Material | Industrial nylon with leather reinforcements; high-density neoprene padding |
| Handedness | Left Handed |
| UPC | 759244212006 |
| Country of Origin | USA |
| Belt Width | 3 in |
Occidental Leather B5135 LG Description
Stronghold Comfort Belt System built from black latigo leather with a 5 in supportive body, thick padded interior, and heavy duty buckles and loops to keep tool bags secure. Handmade in the USA and sized Large.
Occidental Leather B5135 LG Includes
- (1) Tool Belt
Occidental Leather B5135 LG Key Features
- 5 in wide belt provides added back support
- Suspender attachment loops for optional load distribution
- Thick padded, moisture wicking interior for comfort
- Heavy duty buckles and belt loops minimize bag sliding
- 2 in all leather overbelt keeps pouches stable
- Nickel plated steel hardware; edge stitched for strength
- Handcrafted in the USA
Occidental Leather B5135 LG Applications
- Carrying and stabilizing tool pouches on the jobsite
- Reducing lower back strain during all day wear
- Use with suspenders for added weight distribution
- General construction, carpentry, electrical, and finish work
Occidental Leather B5135 LG Installation Overview
- Select correct size; position belt around waist over work pants.
- Thread tool bags onto the overbelt and place in desired positions.
- Buckle the belt and tighten to a comfortable, secure fit.
- Attach suspenders to the loops if using for extra support.
- Recheck fit and adjust pouch spacing as needed.
Occidental Leather B5135 LG Specifications
| Size | Large |
| Waist Size | Approx. 41 in |
| Belt Width | 5 in |
| Overbelt Width | 2 in |
| Color | Black |
| Material | Latigo leather with padded, moisture wicking liner |
| Buckle/Connection | Buckle; nickel plated steel hardware |
| Weight | 2.35 lb |
| Country of Origin | USA |
| UPC | 759244334005 |
Occidental Leather 5135 M Description
Handcrafted 5 in work belt built for support and comfort. Made from 12-14 oz OX Red Latigo leather with a moisture wicking wool liner. Features a 2 in all leather overbelt, nickel plated buckles, suspender loops, and edge stitching to hold tool bags in place and provide long lasting durability. Made in USA.
Occidental Leather 5135 M Includes
- (1) 5135 M Stronghold Comfort Belt
Occidental Leather 5135 M Key Features
- Wide 5 in belt for enhanced back support
- Built in suspender attachment loops
- Thick padded wool liner for comfort and moisture control
- Heavy duty buckles and belt loops reduce bag sliding
- Edge stitched leather for added strength
- Made in USA
Occidental Leather 5135 M Applications
- Securely carry tool bags and pouches on the job
- Provide back support during long workdays
- Use with suspenders for balanced load distribution
- Suitable for carpentry, framing, and general trades
- Comfortable wear in warm or active conditions
Occidental Leather 5135 M Installation Overview
- Measure an existing tool belt from buckle end to the most used hole to find belt size.
- Select Medium if your measurement is near 37 in midpoint.
- Wear over standard work clothing and tighten using the preferred hole.
- Attach tool bags to the overbelt and loops; add suspenders if needed.
- Confirm comfortable fit and adjust within the available holes.
Occidental Leather 5135 M Specifications
| Size | Medium |
| Belt Width | 5 in |
| Overbelt Width | 2 in |
| Material | 12-14 oz OX Red Latigo Leather |
| Liner | Padded wool |
| Hardware | Nickel plated steel |
| Color | OxyRed, Brown Tan |
| Weight | 5.4 lbs |
| Country of Manufacture | USA |
NOTE: Measure your belt, not your pant waist, to select the correct size.
Occidental Leather 8089LH XXL Description
A lightweight, left-handed framer belt system blending abrasion resistant industrial nylon with leather reinforcements for durability and reduced weight. Hand specific NoSpill tool holders and padded two ply bags keep tools organized and the bag shape stable.
Occidental Leather 8089LH XXL Includes
- (1) OxyLights 7 Bag Framer Set - Left
- (1) HD 3 in Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH XXL Key Features
- 22 pockets and tool holders
- Hand specific tool layout with NoSpill leather holders
- Padded two ply bags maintain shape
- Industrial nylon with leather reinforcements
- Made in USA
Occidental Leather 8089LH XXL Applications
- Framing and general carpentry tool carry
- Fastener and small part organization on the jobsite
- Left handed workflow optimization
- Daily professional construction use
Occidental Leather 8089LH XXL Installation Overview
- Size the belt to your work clothing and buckle at the midpoint hole.
- Attach tool and fastener bags in the left handed layout.
- Secure the hammer holder and any clip on accessories.
- Load tools and fasteners into designated pockets.
- Adjust fit for comfort and balance before use.
Occidental Leather 8089LH XXL Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | XX-Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Belt Width | 3 in |
| UPC | 759244229707 |
| Components | 8018DB Tool Bag, 8062 Fastener Bag, 5012 Hammer Holder, 5035 Ranger Work Belt |
| Handedness | Left |
Occidental Leather 8585 XXXL Description
The Heritage FatLip Tool Bag Set is built for production carpenters, featuring 10 inch deep bags with a full leather boot and a distinctive leather FatLip mouth that stays open and resists abrasion. Padded two-ply tool bags keep their shape, while hand-specific holders organize tools for efficient workflow.
Occidental Leather 8585 XXXL Includes
- (1) Heritage FatLip Fastener Bag
- (1) Heritage FatLip Tool Bag
- (1) HD 3 inch Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
Occidental Leather 8585 XXXL Key Features
- 25 pockets and tool holders for organized storage
- Hand-specific tool holder layout
- Padded two-ply bags maintain structure
- Industrial nylon for high abrasion resistance
- Leather tool holders with reinforced corners
- Full leather boot and FatLip bag mouth
- Made in USA
Occidental Leather 8585 XXXL Applications
- Production carpentry and framing
- General construction tool organization
- Remodeling and installation tasks
- Finish and trim carpentry
- Jobsite tool carry with quick access
Occidental Leather 8585 XXXL Installation Overview
- Measure from belt buckle to the hole you use to determine belt size.
- Wear over normal work clothes and select the best buckle hole.
- Attach tool and fastener bags to preferred sides.
- Secure the 2-in-1 holder at the rear for hammer or specialty tools.
- Load tools and adjust for comfort and balance.
Occidental Leather 8585 XXXL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XXXL |
| Belt Length | 53 in. |
| Weight | 5.2 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| UPC | 759244282801 |
Occidental Leather 8089LH M Description
The OxyLights 7 Bag Framer Set combines industrial nylon with top-grain leather to cut weight while staying durable. A hand-specific layout with NoSpill leather holders keeps essential framing tools secure and accessible. Left-handed configuration. Made in USA.
Occidental Leather 8089LH M Includes
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 8062 OxyLights 4 Pouch Fastener Bag
- (1) 5012 Hammer Holder
- (1) 8018DB OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH M Features
- 22 pockets and tool holders for high-capacity carry
- Hand-specific tool layout for efficient workflow
- Padded two ply bags hold their shape
- Abrasion resistant industrial nylon with leather reinforcements
- NoSpill leather holders and OxyRed reinforced stress points
- Made in USA
Occidental Leather 8089LH M Applications
- Framing and rough carpentry tool organization
- General construction and jobsite carry
- Layout, measuring, and fastening tasks
- Left-handed workflow setups
Occidental Leather 8089LH M Installation Overview
- Measure and select proper belt size; position over typical workwear.
- Attach tool and fastener bags to the belt in left-handed layout.
- Secure hammer holder and adjust pouch spacing for balance.
- Tighten belt to a comfortable fit; verify free access to tools.
- Load tools and perform a final comfort and security check.
Occidental Leather 8089LH M Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | Medium |
| Weight | 4.0 lb |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Orientation | Left-handed |
| Belt Width | 3 in |
| Series | OxyLights |
| Made In | USA |
Occidental Leather 8089LH LG Description
The OxyLights 7 Bag Framer Set combines abrasion resistant industrial nylon with leather to cut weight while maintaining durability. Hand specific, all leather NoSpill tool holders keep essential tools secure, mirroring the layout of the all leather 5089LH in a lighter build. Made in USA.
Occidental Leather 8089LH LG Includes
- (1) OxyLights 7 Bag Framer Set - Left, Large
- (1) HD 3 in. Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH LG Features
- 22 pockets and tool holders
- Hand specific NoSpill leather holders for secure access
- Padded two ply tool bags hold their shape
- Extremely abrasion resistant industrial nylon construction
- Leather tool holders with leather reinforced corners
- Made in USA
Occidental Leather 8089LH LG Applications
- Framing and rough carpentry
- General carpentry tool organization on the jobsite
- Left handed tool layout for efficient workflow
- Residential and light commercial construction
- Daily use by professional builders seeking lightweight durability
Occidental Leather 8089LH LG Installation Overview
- Measure and size the belt to your work clothing.
- Position the fastener and tool bags for a left handed layout.
- Secure the hammer holder and accessories on the belt.
- Load tools and fasteners; adjust pouch positions for balance.
- Check fit and tighten belt for a secure, comfortable carry.
Occidental Leather 8089LH LG Specifications
| Pockets and Holders | 22 |
| Belt Size | Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Configuration | Left handed |
| Made In | USA |
Occidental Leather 8080DBLH XXXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLH XXXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLH XXXL Description
Leather and industrial nylon combine to create a lightweight, durable OxyLights framer system with double outer bags. Hand-specific, all-leather holders help prevent spills, and main bag corners are reinforced with OxyRed leather for long-term performance. Left-handed layout.
Occidental Leather 8080DBLH XXXL Includes
- (1) HD 3" Ranger Work Belt
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
- (1) OxyLights 3 Pouch Fastener Bag
Occidental Leather 8080DBLH XXXL Key Features
- 20 pockets and tool holders
- Hand-specific tool holder layout for efficiency
- Padded two-ply nylon bags hold their shape
- Industrial nylon resists abrasion
- Leather tool holders with reinforced corners
- Made in USA
Occidental Leather 8080DBLH XXXL Applications
- Framing tasks requiring fast access to tools and fasteners
- General carpentry and jobsite setup
- Organized carry for hammers, tape, squares, and hand tools
- Left-handed workflows needing mirrored pouch placement
Occidental Leather 8080DBLH XXXL Installation Overview
- Measure your existing tool belt from buckle end to used hole to confirm XXXL sizing.
- Attach tool and fastener bags to the belt in left-handed orientation.
- Secure hammer holder at rear center; adjust position for reach.
- Load tools and fasteners; balance weight across both sides.
- Check fit and tighten belt for comfortable, secure carry.
Occidental Leather 8080DBLH XXXL Specifications
| Pockets & Tool Holders | 20 |
| Belt Size | XXXL |
| Weight | 3.8 lbs |
| Material | Leather |
| Color | Green, Tan |
| Handedness | Left handed |
| UPC | 759244228502 |
Occidental Leather 5089LH XL Seven Bag Framer - Left Handed
Built for framers needing maximum capacity, this Pro Leather setup delivers seven pouches and 23 total pockets and tool holders. Premium top grain leather with copper-riveted stress points and a NoSpill tool holder layout provides long-lasting durability and secure organization for left-handed users.
Includes
- (1) Seven Bag Framer Tool Belt Set (5089LH XL)
- (1) HD 3 in Ranger Work Belt
- (1) 4 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Key Features
- Left-handed configuration for optimal workflow
- Premium top-grain leather construction
- 12 oz belting leather with steel roller buckle
- Copper rivet reinforcement at main bags
- NoSpill tool holder system for secure storage
- 23 pockets and tool holders for high capacity
- Made in the USA
Applications
- Framing and rough carpentry tool organization
- Jobsite fastener carrying and access
- Daily professional construction use
- Left-handed builders needing a hand-specific layout
Installation Overview
- Measure and confirm XL belt sizing per your work clothing.
- Slide tool and fastener bags onto the belt in left-handed layout.
- Attach hammer holder at rear center position.
- Buckle belt and adjust for a secure, comfortable fit.
- Load tools and verify balanced weight distribution.
Specifications
| Pockets & Tool Holders | 23 |
| Belt Size | XL |
| Weight | 5.4 lbs |
| Material | Top-grain leather |
| Color | Brown, Tan |
| Hand Orientation | Left Handed |
| Country of Manufacture | USA |
Occidental Leather 5089LH SM Description
Seven Bag Framer - Left Handed, Small. Built in the Pro Leather Series from premium top grain leather with oils and waxes for demanding outdoor use. High capacity layout with NoSpill tool holders and copper rivet reinforcement for durability.
Occidental Leather 5089LH SM Includes
- (1) Seven Bag Framer Tool Belt Set
- (1) HD 3 in Ranger Work Belt
- (1) 4 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather 5089LH SM Features
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- NoSpill tool holder system
- Copper rivets reinforce main bags
- 23 pockets and tool holders
- Function engineered for modern framers
- Made in USA
Occidental Leather 5089LH SM Applications
- Framing: organize fasteners and core tools for efficient workflow
- General carpentry: carry hand tools, square, and measuring gear
- Jobsite setup: high capacity pouch system for daily tasks
- Left-handed layout: tool bag on left, fasteners on right
Occidental Leather 5089LH SM Installation Overview
- Measure your current tool belt from buckle end to the hole used to determine size.
- Place belt over typical work clothing and adjust to midpoint hole.
- Attach tool and fastener bags in the left-handed configuration.
- Load tools and fasteners into dedicated NoSpill holders.
- Verify comfort and balance; fine tune pouch positions.
Occidental Leather 5089LH SM Specifications
| Pockets and Tool Holders | 23 |
| Pouch Count | 7 |
| Belt Size | Small |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Hand Orientation | Left handed |
Occidental Leather 8089LH XL Description
The OxyLights 7 Bag Framer Set blends industrial nylon with leather to cut weight while maintaining durability. Hand-specific NoSpill leather holders and padded two-ply bags keep tools organized and the bag shape stable. Built to mirror the layout of the all-leather 5089LH with less bulk. Made in USA.
Occidental Leather 8089LH XL Includes
- (1) HD 3 in. Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH XL Features
- 22 pockets and tool holders
- Hand-specific tool layout with NoSpill leather holders
- Padded two-ply bags hold their shape
- Abrasion-resistant industrial nylon with leather reinforcement
- Left-handed setup; Made in USA
Occidental Leather 8089LH XL Applications
- Framing and rough carpentry tool organization
- Jobsite fastener and hand tool carry
- Left-handed tool belt setup for carpenters
- General construction and remodeling
Occidental Leather 8089LH XL Installation Overview
- Size the HD Ranger belt to your work clothing and secure the buckle.
- Position fastener and tool bags on preferred sides for left-hand layout.
- Attach the hammer holder at center rear.
- Load tools and fasteners into hand-specific pockets.
- Check balance and tighten belt for a secure, comfortable fit.
Occidental Leather 8089LH XL Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | X-Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Configuration | Left-handed |
Occidental Leather 8080DB XL OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB XL OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB XL Description
Leather and industrial nylon are combined to reduce weight while maintaining durability. OxyRed leather reinforces high-wear corners and the all-leather NoSpill tool holders keep tools secure. A popular framer setup in a lighter OxyLights alternative.
Occidental Leather 8080DB XL Includes
- (1) OxyLights 3 Pouch Tool Bag
- (1) OxyLights 3 Pouch Fastener Bag
- (1) Hammer Holder
- (1) HD 3 in Ranger Work Belt
Occidental Leather 8080DB XL Key Features
- 21 pockets and tool holders
- Hand-specific holder layout for efficient access
- Padded two-ply bags hold shape under load
- Industrial nylon exterior resists abrasion
- Leather tool holders and reinforced corners
- Made in USA
Occidental Leather 8080DB XL Applications
- Framing and general carpentry tool organization
- Jobsite fastener and small parts storage
- Daily wear belt for professional builders
- Hands-free access to hammers, tape, and layout tools
Occidental Leather 8080DB XL Installation Overview
- Measure belt size from buckle to the hole you use; select XL.
- Thread the HD Ranger Work Belt through pouches and holders.
- Position tool and fastener bags for hand preference.
- Attach hammer holder and load tools evenly.
- Secure the belt; adjust for comfort and balance.
Occidental Leather 8080DB XL Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | XL |
| Weight | 3.8 lbs |
| Material | Leather |
Occidental Leather 8080DB M OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB M OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB M Description
Leather and industrial nylon intelligently combined to lighten the builders load. OxyRed leather reinforces main bag corners and provides the NoSpill system of all leather tool holders. A popular framer setup in a lighter weight alternative with double outer bags.
Occidental Leather 8080DB M Includes
- (1) 8080DB M OxyLights Framer Set
- (1) OxyLights 3 Pouch Tool Bag
- (1) OxyLights 3 Pouch Fastener Bag
- (1) Hammer Holder
- (1) HD 3 in Ranger Work Belt
Occidental Leather 8080DB M Key Features
- 21 pockets and tool holders for organized carry
- Hand specific tool holder layout for efficiency
- Padded two ply nylon bags hold shape
- Industrial abrasion resistant nylon
- Leather tool holders with corner reinforcement
- Made in USA
Occidental Leather 8080DB M Applications
- Framing and general carpentry tool organization
- On site fastener and tool access for construction
- Deck building and exterior trim projects
- Remodeling tasks requiring multi tool carry
Occidental Leather 8080DB M Installation Overview
- Select Medium size; thread belt through both bags and hammer holder.
- Position tool bag on your dominant hand side; fastener bag opposite.
- Buckle belt and adjust fit using belt holes for comfortable support.
- Load tools and fasteners into dedicated pockets and holders.
- Verify balance and accessibility; re adjust as needed.
Occidental Leather 8080DB M Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | Medium |
| Weight | 3.8 lbs |
| Material | Leather and Industrial Nylon |
Occidental Leather 8585LH SM Description
Built for production carpenters, the Heritage FatLip Tool Bag Set features 10 in deep bags with a full leather boot and a leather FatLip mouth that stays open and resists abrasion. Hand specific holder layout optimizes efficiency for left handed users. Padded two ply industrial nylon exteriors add durability and shape retention. Made in USA.
Occidental Leather 8585LH SM Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH SM Key Features
- FatLip leather mouth helps bags keep shape and resist wear
- Full leather boot for rugged, long term durability
- Hand specific tool layout for left handed workflows
- Padded two ply bags with abrasion resistant industrial nylon
- 3 in HD Ranger belt with center 2-in-1 tool and hammer holder
- Pockets and tool holders: 25
- Made in the USA
Occidental Leather 8585LH SM Applications
- Framing and production carpentry
- Organizing tools and fasteners on the jobsite
- Left handed tool belt setup for daily use
- General construction and remodeling tasks
Occidental Leather 8585LH SM Installation Overview
- Thread the pouches and 2-in-1 holder onto the HD 3 in Ranger belt.
- Configure as left handed: tool bag on left, fastener bag on right.
- Buckle belt and adjust for a secure, comfortable fit.
- Seat the hammer in the rear holder and load tools into dedicated pockets.
- Verify clearance and balance before working.
Occidental Leather 8585LH SM Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Small |
| Weight | 5.2 lbs |
| Materials | Leather, Nylon |
| Color | Green, Tan |
| Bag Depth | 10 in |
| Belt Width | 3 in |
| Hand | Left |
| Country of Origin | USA |
Showing 48/77
