Occidental Leather
Occidental Leather 8089LH LG OxyLights 7 Bag Framer Set - Left
Occidental Leather 8089LH LG Description
The OxyLights 7 Bag Framer Set combines abrasion resistant industrial nylon with leather to cut weight while maintaining durability. Hand specific, all leather NoSpill tool holders keep essential tools secure, mirroring the layout of the all leather 5089LH in a lighter build. Made in USA.
Occidental Leather 8089LH LG Includes
- (1) OxyLights 7 Bag Framer Set - Left, Large
- (1) HD 3 in. Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH LG Features
- 22 pockets and tool holders
- Hand specific NoSpill leather holders for secure access
- Padded two ply tool bags hold their shape
- Extremely abrasion resistant industrial nylon construction
- Leather tool holders with leather reinforced corners
- Made in USA
Occidental Leather 8089LH LG Applications
- Framing and rough carpentry
- General carpentry tool organization on the jobsite
- Left handed tool layout for efficient workflow
- Residential and light commercial construction
- Daily use by professional builders seeking lightweight durability
Occidental Leather 8089LH LG Installation Overview
- Measure and size the belt to your work clothing.
- Position the fastener and tool bags for a left handed layout.
- Secure the hammer holder and accessories on the belt.
- Load tools and fasteners; adjust pouch positions for balance.
- Check fit and tighten belt for a secure, comfortable carry.
Occidental Leather 8089LH LG Specifications
| Pockets and Holders | 22 |
| Belt Size | Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Configuration | Left handed |
| Made In | USA |
Occidental Leather 8089LH LG OxyLights 7 Bag Framer Set - Left
Left handed OxyLights 7 bag framer belt, Large
✓ Left handed layout for efficient access
✓ 22 pockets and holders for organization
✓ Padded two ply bags keep their shape
✓ NoSpill leather holders secure tools
✓ Made in USA
1 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Nylon Gear Care
- Brush off jobsite grit daily; wipe with a damp cloth and air dry.
- Shake out interior debris periodically.
- Avoid prolonged sun exposure and harsh chemical cleaners.
- For stubborn grime, clean with mild soap and water.
- Store in a cool, dry place when not in use.
Abrasions or small tear repair
- Seal with nylon repair tape or a fabric patch; a drop of super glue can help on very small areas.
- Clean and dry the surface before applying a patch.
- For added strength, stitch over the patched area with heavy duty thread.
Catching minor damage early helps prevent failure, especially at seams, corners, and straps.
- Hand Specific NoSpill Holders secure tools and speed workflow
- Padded Two Ply Bags maintain shape when empty
- Abrasion Resistant Nylon with leather reinforcements for durability
- Pockets and Holders: 22
- Belt Size: Large
- Weight: 4.0 lbs
- Material: Leather, Nylon
- Color: Green, Tan
- Made in the USA
More About Occidental Leather 8089LH LG OxyLights 7 Bag Framer Set - Left
Occidental Leather 8089LH LG Description
The OxyLights 7 Bag Framer Set combines abrasion resistant industrial nylon with leather to cut weight while maintaining durability. Hand specific, all leather NoSpill tool holders keep essential tools secure, mirroring the layout of the all leather 5089LH in a lighter build. Made in USA.
Occidental Leather 8089LH LG Includes
- (1) OxyLights 7 Bag Framer Set - Left, Large
- (1) HD 3 in. Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH LG Features
- 22 pockets and tool holders
- Hand specific NoSpill leather holders for secure access
- Padded two ply tool bags hold their shape
- Extremely abrasion resistant industrial nylon construction
- Leather tool holders with leather reinforced corners
- Made in USA
Occidental Leather 8089LH LG Applications
- Framing and rough carpentry
- General carpentry tool organization on the jobsite
- Left handed tool layout for efficient workflow
- Residential and light commercial construction
- Daily use by professional builders seeking lightweight durability
Occidental Leather 8089LH LG Installation Overview
- Measure and size the belt to your work clothing.
- Position the fastener and tool bags for a left handed layout.
- Secure the hammer holder and accessories on the belt.
- Load tools and fasteners; adjust pouch positions for balance.
- Check fit and tighten belt for a secure, comfortable carry.
Occidental Leather 8089LH LG Specifications
| Pockets and Holders | 22 |
| Belt Size | Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Configuration | Left handed |
| Made In | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
