Occidental Leather Tool Belt Systems

Occidental Leather 8086LHM Features

• Left-handed layout with hand-specific tool holders
• Patented 2-in-1 outer pouch for compact organization
• Padded two ply tool bags maintain shape
• Industrial nylon with leather corner reinforcement
• OxyRed leather NoSpill tool holders
• Made in USA

Occidental Leather 8086LHM Applications

• Framing carpentry and rough construction
• Deck building and structural layout
• General remodeling and jobsite tool organization
• Left-handed trades needing mirrored tool access

Occidental Leather 8086LHM Installation Overview

1. Measure belt size on a belt you use; do not use pant size.
2. Wear over typical work clothing and position for comfort.
3. Adjust from buckle to the hole you use to confirm fit.
4. Load tools into hand-specific holders for left-handed use.
5. Secure hammer to the high mount and check balance.

Occidental Leather 8086LH XL Key Features

• 21 pockets and tool holders
• Hand specific holder layout for left hand users
• Padded two ply tool bags keep their shape
• Extremely abrasion resistant industrial nylon
• Leather tool holders and corner reinforcement
• Made in USA

Occidental Leather 8086LH XL Applications

• Framing and rough carpentry
• General construction and remodeling
• Organizing fasteners and small tools onsite
• Left hand tool carry for improved efficiency
• Daily professional jobsite use

Occidental Leather 8086LH XL Installation Overview

1. Measure an existing belt or measure from buckle to the hole you use to confirm belt size.
2. Wear the belt over standard work clothing and adjust to a comfortable hole.
3. Position tool and fastener bags for a left hand workflow and secure to the belt.
4. Attach the high hammer mount and any clip-on holders as needed.
5. Load tools and fasteners; check balance and comfort before use.

Occidental Leather 5087LHLG Features

• 21 pockets & tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout for left handed users
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087LHLG Applications

• Framing and rough carpentry
• General construction and remodeling
• Left handed jobsite tool organization
• Efficient fastener and tool access

Occidental Leather 5087LHLG Installation Overview

1. Select correct belt size and thread through pouches and holders.
2. Position tape holder on right and double pouch tool bag on left.
3. Attach hammer holder and adjust locations as preferred.
4. Buckle belt and adjust for a snug, comfortable fit.
5. Load tools and fasteners; verify balanced weight and access.

Occidental Leather 6100T LG Features

• Premium top grain leather construction
• Hand specific tool holders for efficient workflow
• Copper rivets reinforce main bags
• NoSpill tool holder system keeps tools secure
• Function engineered for modern builders
• Made in USA

Occidental Leather 6100T LG Applications

• Trim carpentry and finish work
• Light framing tasks
• General jobsite tool organization

Occidental Leather 6100T LG Installation Overview

1. Measure current tool belt from buckle end to your most used hole.
2. Select the size closest to that measurement; this model is Large.
3. Load tools into hand specific holders and secure in NoSpill positions.
4. Seat tape in the high mount holster and adjust belt to midpoint hole.
5. Verify comfort and accessibility before starting work.

Occidental Leather 5087 LG Key Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout with tape holder on left
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087 LG Applications

• Framing and general carpentry
• Organized tool and fastener carry on the jobsite
• Outdoor construction environments
• Setups favoring tape holder on the left side
• Daily use by professional trades

Occidental Leather 5087 LG Installation Overview

1. Measure your current tool belt from buckle end to used hole to determine size.
2. Position tool bag on dominant hand side and fastener bag on opposite side.
3. Buckle the 3 in. Ranger belt at midpoint hole and adjust for comfort.
4. Load essential tools and fasteners into designated pockets and holders.
5. Fine tune bag placement for reach and working rhythm.

Occidental Leather 5087 LG Key Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout with tape holder on left
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087 LG Applications

• Framing and general carpentry
• Organized tool and fastener carry on the jobsite
• Outdoor construction environments
• Setups favoring tape holder on the left side
• Daily use by professional trades

Occidental Leather 5087 LG Installation Overview

1. Measure your current tool belt from buckle end to used hole to determine size.
2. Position tool bag on dominant hand side and fastener bag on opposite side.
3. Buckle the 3 in. Ranger belt at midpoint hole and adjust for comfort.
4. Load essential tools and fasteners into designated pockets and holders.
5. Fine tune bag placement for reach and working rhythm.

Occidental Leather 5080DBLH LG Key Features

• Left handed, hand specific layout
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Built in tape holster for tapes up to 30 ft
• Pockets and tool holders: 21
• Made in USA

Occidental Leather 5080DBLH LG Applications

• Framing and rough carpentry
• General construction tool carry
• Remodeling and jobsite setup
• Efficient organization of tools and fasteners
• Left handed trades needing balanced access

Occidental Leather 5080DBLH LG Installation Overview

1. Measure your current tool belt from buckle end to the used hole to determine belt size.
2. Select size to match the midpoint measurement for proper adjustment.
3. Position tool bag on dominant left side and fastener bag on right.
4. Secure the belt using the steel roller buckle and adjust for comfort.
5. Load tools and tapes into the hand specific holders and verify balanced carry.

Occidental Leather 8086LHLG Key Features

• Hand specific tool holders for a left handed layout
• Padded two ply bags maintain shape
• Industrial nylon body for high abrasion resistance
• Leather tool holders with leather reinforced corners
• Seven bag configuration with patented 2-in-1 outer pouch

Occidental Leather 8086LHLG Installation Overview

1. Lay your current belt flat and measure from the buckle end to the most used hole.
2. Select the belt size whose mid range is closest to that measurement.
3. If you do not have a belt, use your approximate mid range waist measurement to choose size.

Occidental Leather 6100T LG Features

• Premium top grain leather construction
• Hand specific tool holders for efficient workflow
• Copper rivets reinforce main bags
• NoSpill tool holder system keeps tools secure
• Function engineered for modern builders
• Made in USA

Occidental Leather 6100T LG Applications

• Trim carpentry and finish work
• Light framing tasks
• General jobsite tool organization

Occidental Leather 6100T LG Installation Overview

1. Measure current tool belt from buckle end to your most used hole.
2. Select the size closest to that measurement; this model is Large.
3. Load tools into hand specific holders and secure in NoSpill positions.
4. Seat tape in the high mount holster and adjust belt to midpoint hole.
5. Verify comfort and accessibility before starting work.

Occidental Leather 5080LH LG Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout promotes work rhythm
• Made in USA

Occidental Leather 5080LH LG Applications

• Framing and general carpentry
• Fastener and small tool organization on site
• Measuring and layout tasks
• Daily carry for hammers, tapes, and hand tools

Occidental Leather 5080LH LG Installation Overview

1. Put the belt on over work clothes where you normally wear it.
2. Note the hole used to fasten the belt.
3. Measure from the buckle to that hole to determine belt size.
4. Load tools into hand specific holders and adjust fit for comfort.

Occidental Leather 5080DBLH SM Features

• 21 pockets and tool holders
• Premium top-grain leather construction
• 12-oz belting leather with steel roller buckle
• Copper-riveted stress points
• NoSpill tool holder system
• Left-handed, hand-specific layout
• Built-in tape holster for tapes up to 30 ft
• Made in USA

Occidental Leather 5080DBLH SM Applications

• Framing and general carpentry tool organization
• Jobsite carry of fasteners, hand tools, and layout gear
• Left-handed workflows needing hand-specific placement
• Daily professional use in outdoor conditions

Occidental Leather 5080DBLH SM Installation Overview

1. Measure your current tool belt per size guide; select Small.
2. Thread the 5035 belt through tool and fastener bags.
3. For left-handed use: place tool bag on left, fastener bag on right.
4. Attach hammer holder and adjust buckle for secure fit.
5. Load tools and verify NoSpill holders keep items secure.

Occidental Leather 8585LH LG Key Features

• 25 pockets and tool holders
• Hand specific tool holder layout for left handed users
• Padded two ply bags hold shape
• Industrial nylon with leather reinforcements for abrasion resistance
• Full leather boot and FatLip leather mouth
• Made in USA

Occidental Leather 8585LH LG Applications

• Framing and general carpentry
• Production carpentry tool organization
• Fastener and small tool storage on the jobsite
• Left handed belt system setups

Occidental Leather 8585LH LG Installation Overview

1. Measure an existing belt from buckle to the hole used to determine belt size.
2. Wear the belt over normal work clothing and confirm fit.
3. Attach tool bags and holders to the belt in a left handed layout.
4. Distribute tools and fasteners and adjust for comfort and balance.
5. Check all rivets and loops before use.

Occidental Leather 8585 XXL Key Features

• 25 pockets and tool holders for organized storage
• Hand-specific layout increases efficiency
• Padded two-ply bags maintain shape under load
• Industrial-strength nylon with leather reinforcements
• Full leather boot and FatLip mouth for durability
• Made in USA

Occidental Leather 8585 XXL Applications

• Framing and production carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Heavy-duty daily use in demanding environments

Occidental Leather 8585 XXL Installation Overview

1. Measure an existing belt from buckle end to your most-used hole to confirm size.
2. Wear the belt over typical work clothing and position pouches as preferred.
3. Secure the buckle using the hole that provides a snug, comfortable fit.
4. Attach the hammer holder and adjust bag spacing for reach and balance.
5. Verify all pouches are seated and the set rides level before use.

Occidental Leather 8585LH XXXL Features

• 25 pockets and tool holders
• Left hand specific tool holder layout
• Padded two ply bags maintain shape
• Industrial nylon highly resistant to abrasion
• Leather tool holders with corner reinforcement
• Made in USA

Occidental Leather 8585LH XXXL Applications

• Framing and rough carpentry tool organization
• Finish carpentry and trim installation
• General construction and remodeling tasks
• Jobsite layout and measuring tools carry
• Fastener and small parts management

Occidental Leather 8585LH XXXL Installation Overview

1. Measure an existing belt or use a tape to determine belt size; wear over typical work clothing.
2. Measure from buckle to the hole you use to confirm XXXL belt size.
3. Slide tool bags and holders onto the belt in a left handed layout.
4. Adjust spacing for comfort; secure holders and attach hammer/tool shield.
5. Load tools and fasteners; check balance and tighten belt.

Occidental Leather 8585LH XXL Features

• FatLip leather mouth holds shape and resists wear
• Full leather boot for rugged durability
• Hand-specific tool layout for left-handed users
• Padded two-ply foam core helps bags keep form
• Industrial nylon exterior for high abrasion resistance
• 3 inch HD Ranger Belt for comfort and stability
• Includes center back 2-in-1 tool and hammer holder
• Made in USA

Occidental Leather 8585LH XXL Applications

• Framing and production carpentry
• Deck building and exterior construction
• Remodeling and general jobsite tool organization
• Finish prep and punch list tasks

Occidental Leather 8585LH XXL Installation Overview

1. Select the correct belt size and orient the left-handed layout.
2. Thread pouches onto the 3 inch Ranger belt in the preferred positions.
3. Attach the 2-in-1 holder at the center back.
4. Load tools and fasteners; adjust belt for secure fit.

Occidental Leather 8003 SM Key Features

• 3 in. padded industrial nylon belt body for comfort and support
• 2 in. heavy leather tongue with nickel plated steel roller buckle
• Lightweight design reduces fatigue during long wear
• Works with most tool bags and suspenders
• Made in USA

Occidental Leather 8003 SM Applications

• Foundation belt for building custom tool rig setups
• Daily jobsite tool carry for tradespeople
• Use with suspenders for added load distribution
• Compatible base for professional tool and fastener bags

Occidental Leather 8003 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine belt size.
2. Select size Small if your midpoint measurement is 34 in. (approx. pant waist 29 in. to 32 in.).
3. Thread the leather tongue through the roller buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags to the belt body as needed.
5. Optional: connect suspenders to distribute weight.

Occidental Leather 5035 SM Key Features

• 3 in wide main belt for support
• 2 in leather tongue with steel roller buckle
• Premium 12-14 oz bridle leather construction
• Edge stitched for long-term durability
• Ideal foundation for tool and fastener bags
• Made in USA

Occidental Leather 5035 SM Applications

• Base belt for professional tool carry systems
• Construction and carpentry tool rigs
• Framing, finish work, and general trades
• Pairing with pouches, holsters, and fastener bags

Occidental Leather 5035 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. Thread tool bags and accessories onto the 2 in tongue/loop.
4. Buckle at the midpoint hole; adjust within the 4 in range each way.
5. Ensure comfortable fit over work clothing before use.

Occidental Leather B5080DBLH M Key Features

• Premium top grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand specific tool layout for efficient workflow
• Copper rivets reinforce stress points
• Function driven design for professional framers

Occidental Leather B5080DBLH M Applications

• Framing and rough carpentry
• General jobsite tool and fastener carry
• Remodeling and construction tasks
• Layout work with tape and square holsters
• Left handed workflow setups

Occidental Leather B5080DBLH M Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to determine belt size.
2. Select Medium if your midpoint measurement is about 37 in.
3. Attach tool and fastener bags to the belt with tool bag on the left and fastener bag on the right for left handed use.
4. Secure hammer holder and adjust belt to a comfortable fit.
5. Load tools and verify access and balance.

Occidental Leather B5135 XXL Key Features

• 5 inch wide belt for enhanced back support
• Padded wool liner for comfort and moisture control
• 2 inch all leather overbelt keeps tool bags in place
• Nickel plated steel buckles and hardware
• Built in suspender attachment loops
• Edge stitched for durability and clean appearance
• Made in the USA

Occidental Leather B5135 XXL Applications

• Daily tool carry with improved back support
• Securing Occidental tool bags with minimal sliding
• Use with suspenders for balanced load distribution
• Carpentry, framing, and general construction work
• Comfort focused belt upgrade for heavy rigs

Occidental Leather B5135 XXL Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove and measure from the end of the buckle to the used hole.
3. Select the size closest to that measurement; this model is XX Large.
4. Attach tool bags to the overbelt loops; tighten to minimize sliding.
5. Connect compatible suspenders to the attachment loops if desired.

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 5530 XXL Key Features

• Round bottom full capacity bags for added space and durability
• NoSpill hand specific tool holder layout
• Premium top grain leather throughout
• 3 inch heavy duty English bridle leather belt with steel roller buckle
• Purpose built for framing, trim, and general carpentry
• Made in the USA

Occidental Leather 5530 XXL Applications

• Framing tasks requiring high capacity tool storage
• Trim work and finish carpentry organization
• General carpentry and remodeling
• Jobsite tool protection and quick access
• Daily professional use in demanding conditions

Occidental Leather 5530 XXL Installation Overview

1. Select correct belt size and position belt at working height.
2. Attach Big Oxy tool and fastener bags to the belt loops.
3. Clip on the Oxy Tool Shield and mount the 2 in 1 Tool and Hammer Holder.
4. Load tools into hand specific holders and adjust belt for comfort.
5. Verify secure fit and balance before use.

Occidental Leather 9850LH Features

• Adjust-to-Fit belt allows seasonal clothing changes
• D-rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• FatLip bag design with leather-reinforced corners and bottoms
• Left-handed layout (also available as 9850 for right-handed)

Occidental Leather 9850LH Applications

• Framing and general carpentry
• Production carpentry setups
• Jobsite tool organization and fastener storage
• Use with suspenders for heavy-load days

Occidental Leather 9850LH Installation Overview

1. Measure pant waist and set belt to the appropriate Adjust-to-Fit range.
2. Position left- and right-side bags for preferred reach.
3. Secure hammer holder and tool shield to belt as needed.
4. Load tools and fasteners; verify balance and comfort.
5. Attach suspenders to pre-installed D-rings if desired.

Occidental Leather 5135 M Key Features

• Wide 5 in belt for enhanced back support
• Built in suspender attachment loops
• Thick padded wool liner for comfort and moisture control
• Heavy duty buckles and belt loops reduce bag sliding
• Edge stitched leather for added strength
• Made in USA

Occidental Leather 5135 M Applications

• Securely carry tool bags and pouches on the job
• Provide back support during long workdays
• Use with suspenders for balanced load distribution
• Suitable for carpentry, framing, and general trades
• Comfortable wear in warm or active conditions

Occidental Leather 5135 M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to find belt size.
2. Select Medium if your measurement is near 37 in midpoint.
3. Wear over standard work clothing and tighten using the preferred hole.
4. Attach tool bags to the overbelt and loops; add suspenders if needed.
5. Confirm comfortable fit and adjust within the available holes.

Occidental Leather B5135 SM Key Features

• 5 in wide belt for enhanced back support
• Padded wool liner for moisture-wicking comfort
• 2 in all-leather overbelt helps prevent bag sliding
• Nickel-plated steel buckles and hardware
• Integrated suspender attachment loops
• Edge-stitched Latigo leather for strength and clean finish
• Handcrafted in the USA

Occidental Leather B5135 SM Applications

• Securely carry and stabilize tool bags and pouches
• Back support for all-day wear on construction sites
• Use with suspenders for balanced load distribution
• General carpentry, framing, remodeling, and trades work

Occidental Leather B5135 SM Installation Overview

1. Measure your existing tool belt from buckle end to the hole you use to confirm size.
2. Position the Stronghold belt where you wear your rig and buckle to the midpoint hole.
3. Slide tool bags onto the 2 in overbelt and secure in desired positions.
4. Attach compatible suspenders to the built-in loops if needed.
5. Fine-tune fit for comfort and even weight distribution.