How to Size your Suspenders?

Measuring Instructions:You'll need a flexible tape measure and your tool belt.With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.Round that measurement up to the nearest whole number.Sizing Chart:Small: ≤ 38" (96.5 cm)Standard: 38-48" (96.5 - 122 cm)Extension Kit: > 48" (122 cm)

How to Install Hammer Sleeve?

The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.Installation Tips:Take your time positioning the sleeve before making permanent holes - measure twice, drill once.The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.Make sure the hammer head will be easily accessible when you reach for it.Consider your dominant hand and work style when choosing placement.For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.What Are the Benefits?No More Leg Slapping: Keeps your hammer from swinging and hitting your legsQuick Access: Positions hammer at your fingertips for one-handed retrievalCompact Carry: Tucks hammer close to your body, ideal for working in tight spacesProtects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trimHigh Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movementHow Long Will It Last?Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.Can I Remove It Later?No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.Do I Need Special Tools?You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.

Occidental Leather 5031 Leather Utility Dee

Name: Occidental Leather 5031 Leather Utility Dee
Brand: Occidental Leather
SKU: 57280
Price: 14.90 USD
Availability: InStock

Leather utility dee ring for 3 in belts

Model : 5031

✓ Belt-worn dee ring for spring-snap tools
✓ Fits up to 3 inch belts
✓ 3/4 inch dee ring for secure clipping
✓ Leather strap with snap closure
✓ Made in USA

$14.90

10 in stock

Quantity

Pay with

Your transaction is protected with advanced security measures to keep your information confidential

Leather Gear Care

Brush off dust and grit regularly; wipe with a damp cloth.
Use mild soap and water for deeper cleaning; do not soak.
Air dry away from direct heat or prolonged sun exposure.
Condition leather periodically with a neutral leather conditioner to maintain suppleness.
Avoid harsh chemicals, solvents, or oil-based cleaners.
Store in a cool, dry place; keep metal hardware dry to prevent corrosion.

Belt-worn utility dee – provides secure attachment for spring snaps
Fits belt width – up to 3 inches
Dee ring size – 3/4 inch
Material – leather strap with snap closure
Made in USA
UPC – 759244164602

Occidental Leather 5031 Leather Utility Dee

$14.90

More About Occidental Leather 5031 Leather Utility Dee

Occidental Leather 5031 Description

Compact belt-worn dee ring attachment made of durable leather. Designed to clip spring-snap tools like telephone butt-sets and testers to your work belt. Fits up to a 3 inch belt and uses a 3/4 inch dee ring. Made in USA.

Occidental Leather 5031 Includes

(1) Leather Utility Dee

Occidental Leather 5031 Key Features

Belt-worn utility attachment for spring-snap tools
Fits up to a 3 inch work belt
3/4 inch dee ring for secure clipping
Leather strap construction for durability
Snap closure secures around belt
Made in USA

Occidental Leather 5031 Applications

Carry telephone butt-sets and testers from a belt
Attach meters, small tools, or lanyards via spring snaps
Add a quick-access ring point to tool belts
Organize clip-on accessories for electricians and technicians
Temporary attachment point for keys or ID holders on the job

Occidental Leather 5031 Installation Overview

Open the strap and place it around your work belt.
Position the dee ring where you want access.
Snap the closure to secure the strap to the belt.
Attach the spring snap from your tool or lanyard to the dee ring.
Confirm the snap and ring are fully engaged before use.

Occidental Leather 5031 Specifications

Fits Belt Size	Up to 3 inches
Dee Ring Size	3/4 inch
Material	Leather
Closure Type	Snap
UPC	759244164602
Country of Origin	USA

Sizing Guide

Important: Skip the Pants Size!

Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.

Measuring Your Belt Size:

The most accurate method is to measure a tool belt you already wear regularly. Here's how:

Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
Match your measurement to the sizing chart below.

Don't Have a Tool Belt Yet?

No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.

Sizing Tips:

Between sizes? Go with the larger option for optimal comfort.
These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
Always measure over your full work outfit – tool belts sit over everything you're wearing.

Sizing Chart:

Small: 34" (86.5 cm)
Medium: 37" (94 cm)
Large: 41" (104.5 cm)
X-Large: 45" (114.5 cm)
XX-Large: 49" (124.5 cm)
XXX-Large: 53" (135 cm)

Why Your Pants Size Doesn't Work:

Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
Tool belts go over your entire outfit, not just your waist.
Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.

Measuring Instructions:

You'll need a flexible tape measure and your tool belt.
With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
Round that measurement up to the nearest whole number.

Sizing Chart:

Small: ≤ 38" (96.5 cm)
Standard: 38-48" (96.5 - 122 cm)
Extension Kit: > 48" (122 cm)

The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:

Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.

Installation Tips:

Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
Make sure the hammer head will be easily accessible when you reach for it.
Consider your dominant hand and work style when choosing placement.
For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.

What Are the Benefits?

No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
Quick Access: Positions hammer at your fingertips for one-handed retrieval
Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement

How Long Will It Last?

Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.

Can I Remove It Later?

No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.

Do I Need Special Tools?

You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.