Occidental Leather Professional Tool Bags

Occidental Leather 5017 Features

• Popular two pouch layout without extra outer pouch and tape pocket
• Dedicated holders for pencils, work knife, lumber crayon, chisel, torpedo level, and hammer
• Right side wear for quick right hand access
• Hammer loop included
• Made in USA leather construction

Occidental Leather 5017 Applications

• Framing and general carpentry tool carry
• Trim and light finish work organization
• Daily-use tool access on the right side of the belt
• Hammer and small hand tool holstering

Occidental Leather 5017 Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for right hand access.
3. Load essential tools into the main and outer bags.
4. Place hammer in the loop and secure small items in dedicated holders.
5. Adjust placement for comfort and balance.

Key Features

• 12 pockets and tool holders in a compact, jobsite-efficient layout
• Two-ply foam-core construction maintains structure when empty or loaded
• Clip-on leather tab for tape or accessory pouches
• Steel hammer loop; interior leather tool sleeves
• Right-hand layout; left-hand model available as 9521LH

Applications

• Trim carpentry and finish work
• Light framing tasks
• Cabinetry and punch-list work
• Right-side tool carry for dominant-hand access

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for standard orientation.
3. Attach clip-on leather tab accessories as needed.
4. Insert the Oxy Tool Shield for chisels or knives.
5. Load tools and check balance and access.

Occidental Leather 5526 Key Features

• Round-bottom leather construction adds volume and resists collapse
• Tool-specific storage: torpedo level slot, bit holders, pencil and chisel pockets
• Right-hand layout; worn on the right side
• Includes Oxy Tool Shield for safe carry of sharp tools
• Not available in a left-hand model

Occidental Leather 5526 Applications

• Carpentry and framing tool organization on a work belt
• Right-hand access to frequently used tools
• Jobsite fastener and small tool storage
• General construction and remodeling tasks

Occidental Leather 5526 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for dominant-hand access.
3. Insert the Oxy Tool Shield into the designated pocket.
4. Load tools into dedicated holders and pockets.
5. Check balance and security before working.

Key Features

• Upright storage with 3 internal compartments for quick access
• 45 pockets and tool holders for organized carry
• All-leather main body with water-resistant rubber base
• Handcrafted leather handle that molds to your grip
• D-rings for shoulder strap attachment (strap not included)

Applications

• Carpentry and finish work tool organization
• Jobsite transport of hand tools, fasteners, and accessories
• Shop or service vehicle tool storage

Installation Overview

1. Attach clip-on accessories to exterior mounting points as needed.
2. Organize tools within the three compartments and outer pockets.
3. Secure small parts in the side zip pouch and tool shields.
4. Connect a compatible shoulder strap to D-rings if desired.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather 9503 Key Features

• Angle square holster for quick access
• Single clip-on, large capacity main bag
• Attaches to belts or waistbands for grab-and-go use
• Industrial nylon construction
• Made in USA

Occidental Leather 9503 Applications

• Carry nails, screws, and small hand tools
• Light-duty service calls and punch-list tasks
• DIY and weekend project setups
• Quick add-on storage to existing work belts

Occidental Leather 9503 Installation Overview

1. Clip the pouch onto a belt or waistband.
2. Seat the angle square in the holster slot.
3. Load fasteners or small tools into the main bag.
4. Verify secure attachment before use.

Occidental Leather 6101 Features

• Trim-ready compact leather design for finish work
• Tool-specific holders for nail sets, blade square, and cat's paw
• Streamlined layout reduces bulk and keeps tools organized
• No angle square holster
• Made in USA
• Left-hand version available as 6101LH

Occidental Leather 6101 Applications

• Trim and finish carpentry
• Light framing tasks
• Interior remodel and punch list work
• Organizing fasteners and layout tools on the left side

Occidental Leather 6101 Installation Overview

1. Attach the bag securely to your work belt.
2. Load fasteners and layout tools into dedicated pockets.
3. Wear on the left side for easy left-hand access.

Occidental Leather 5057 Features

• 4 pocket layout keeps small tools separated and easy to grab
• Premium leather construction with reinforced stitching
• In pocket carry or snap loop for belt use
• Fits most belts up to 2.5 inches wide
• Lightweight, compact design for everyday tasks
• Made in USA

Occidental Leather 5057 Applications

• Small repairs and service calls
• Electrical and shop maintenance
• Gardening and farm upkeep
• Cabinet and finish work

Occidental Leather 5057 Installation Overview

1. Load tools into the four pockets as needed.
2. Place the caddy in a front or rear pocket, or
3. Attach via the snap loop to a belt up to 2.5 inches wide.
4. Adjust position for comfortable access and secure carry.

Occidental Leather 9920 Key Features

• Pro Leather construction for long service life
• Bull pin loop on each side for convenient access
• Tunnel loop accepts work belts up to 3 inches
• Three total pockets and holders for organized storage
• Made in the USA

Occidental Leather 9920 Applications

• Carrying bolts and heavy fasteners on steel erection and ironwork
• Keeping bull pins and drift pins accessible on the job
• General construction tasks requiring a rugged fastener pouch

Occidental Leather 9920 Installation Overview

1. Thread the tunnel loop onto a work belt up to 3 inches wide.
2. Position the bag at preferred location on the belt.
3. Load bolts and fasteners into the main pocket.
4. Place bull pins in the side loops for quick access.

Occidental Leather 5564 Key Features

• All leather main bag with divided nylon double outer pouch
• Six black leather tool holders; four pouches total
• Optimized for wire nuts, couplers, and small fasteners
• Left side wear for fast access with the left hand
• Full grain leather and industrial nylon construction

Occidental Leather 5564 Applications

• Organizing and carrying fasteners and small parts
• Keeping layout and marking tools at hand
• Electrical and mechanical fittings storage
• Daily jobsite use with hybrid leather and nylon durability

Occidental Leather 5564 Installation Overview

1. Slide the belt loop over your work belt.
2. Position on the left side for non dominant hand access.
3. Distribute tools and fasteners among the divided pouches.
4. Secure frequently used layout tools in the leather holders.

Occidental Leather 6102 Key Features

• 9 total pockets and tool holders for finish essentials
• All-leather construction for durability
• Interior sleeves for pencil, knife, chisel, and lumber crayon
• Exterior tool snap clip and heavy-duty hammer loop
• Right-hand layout; worn on the right side
• Made in the USA

Occidental Leather 6102 Applications

• Trim and finish carpentry
• Cabinetry and installation work
• Light framing tasks
• Everyday carry for right-handed tool access

Occidental Leather 6102 Installation Overview

1. Slide pouch onto your work belt.
2. Position on the right side for optimal access.
3. Load primary tools into main and outer bags.
4. Place pencil, knife, chisel, and crayon in interior holders.
5. Secure hammer in loop and clip accessory to the tool snap.

Occidental Leather 5585 Key Features

• Divided upright interior — 16 screwdriver loops and 9 center compartments
• Exterior storage — 6 outside pockets and 6 outside tool loops
• Rugged build — heavy lock-stitched nylon thread and reinforced bottom
• Leather luggage-style handle for comfortable carry
• Steel Dee hardware for optional shoulder strap
• Includes snap clip and location strap for clip-on items
• Made in the USA

Occidental Leather 5585 Applications

• Organizing and transporting hand tools on the jobsite
• Electrician, maintenance, and service technician tool carry
• Workshop storage for frequently used tools and fasteners
• Clip-on accessory expansion with included 9501 bag and Tool Shields

Occidental Leather 5585 Installation Overview

1. Load tools into divided interior and loops for balanced weight.
2. Attach 9501 clip-on bag and Tool Shields to desired locations.
3. Use the leather handle for carry; add a shoulder strap to Dee rings if desired.
4. Inspect rivets and stitching periodically to ensure secure carry.

Occidental Leather B5611 Features

• All leather construction with classic black finish
• Integrated Oxy Tool Shield for sharp tools
• Upper bag with sleeve pockets and drill bit holsters
• Side by side 35 ft tape holster and angle square holster
• Reinforced back wall at stress points
• Pockets & tool holders: 10
• Available left-hand version: B5611LH

Occidental Leather B5611 Applications

• Fastener and small tool organization for framing and carpentry
• Quick access to tape, angle square, and drill bits
• Left-side wear for tools commonly accessed with the left hand

Occidental Leather B9019 Key Features

• Compact single-compartment pouch for fast access
• Padded, double wall industrial nylon for structure and durability
• Lightweight design suited for small jobs or as a third bag
• Slides onto work belts; compatible up to 3 in. belts
• Made in the USA

Occidental Leather B9019 Applications

• Carry fasteners, parts, or small hand tools
• Add-on storage for tool belt systems
• Service calls and light-duty tasks
• Organizing essentials for trim or punch list work

Occidental Leather B9019 Installation Overview

1. Thread the bag onto your work belt (fits up to 3 in.).
2. Position at preferred location for access.
3. Load with small tools, fasteners, or parts.
4. Check balance and adjust as needed on the belt.

Occidental Leather 9085 Features

• Purpose-built tool organization in a compact case
• 18 pockets and tool holders for screwdrivers, chisels, bits, and more
• Leather-lined bottom enhances durability and shape retention
• Four rigid interior walls keep tools upright
• Includes 2 Oxy Tool Shields for sharp tool protection
• Made in the USA

Occidental Leather 9085 Applications

• Finish carpentry tool organization
• Plant engineering and maintenance kits
• On-the-go tool access for service professionals
• Upright storage for hand tools and accessories

Occidental Leather 9085 Installation Overview

1. Load tools into dedicated pockets and holders.
2. Place sharp tools in the included Oxy Tool Shields.
3. Attach the case securely to your work belt.
4. Arrange tools upright using interior dividers for quick access.

Occidental Leather 9025 Key Features

• Compact 6-in-1 design combines pockets and holders
• Padded nylon fastener bag for added capacity
• Holds tape, hammer, knife or chisel, pencils and fasteners
• Space-saving add-on for tool belts or vests
• Ideal for trim, punch list, and small tasks

Occidental Leather 9025 Applications

• Carry essentials for quick service calls
• Trim and finish work where a light setup is needed
• Punch list tasks and small repairs
• Supplemental pouch for tool belts or vests

Occidental Leather B8064 Features

• Patented 2-in-1 outer pouch with angle square holster
• Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
• Four-bag layout for layered storage
• Holds fasteners and tools commonly accessed with the left hand
• Made in USA

Occidental Leather B8064 Applications

• Framing: Keep nails, square, and layout tools organized
• General carpentry: Quick access to bits, nail sets, and cat's paw
• Layout work: Integrated angle square holster for fast measurement
• Jobsite organization: Layered pouches separate fasteners and small tools

Occidental Leather B8064 Installation Overview

1. Select right- or left-handed variant to match your setup.
2. Slide the bag onto a compatible work belt and secure.
3. Position fastener bag on the left side for right-handed users; right side for left-handed users.
4. Load fasteners and layout tools into the designated sleeves and pouches.
5. Verify comfortable reach and adjust placement as needed.

Occidental Leather 5023B Key Features

• Two-pouch leather bag with open, holder-free layout
• Durable full-leather construction for long service life
• Streamlined design for fasteners and small tools
• Made in the USA
• Lightweight and compact for everyday carry

Occidental Leather 5023B Applications

• Fastener storage for carpentry and framing
• Small tool organization for service and maintenance
• Trim and finish work where a compact pouch is preferred
• General jobsite use with minimal bulk

Occidental Leather 5023B Installation Overview

1. Place the pouch on your work belt or system per your preferred layout.
2. Load fasteners or small tools into the main and outer pockets.
3. Adjust placement for comfortable access during work.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 5085 Key Features

• 17 pockets and holders for organized storage inside and out
• Divided interior for separated, easy-to-reach tool access
• Quick-release snap and strap for electrical tape
• Holster fits a 35 ft x 1 in tape measure
• Constructed from 8 oz top grain leather; Made in USA
• Tunnel loop fits up to a 3 in work belt

Occidental Leather 5085 Applications

• Organizing hand tools for jobsite or shop use
• Carrying screwdrivers, pliers, knives, chisels, markers, and strippers
• Holding torpedo level, hammer, and tape measure
• Attaching to belts up to 3 in for hands-free access

Occidental Leather 5085 Installation Overview

1. Thread a work belt (up to 3 in wide) through the tunnel loop.
2. Position the case at preferred location on your belt.
3. Load tools into divided pockets for balanced weight.
4. Secure tape to the strap and attach items to the quick-release snap as needed.
5. Verify pockets and snap are closed before use.

Occidental Leather 9512 Features

• Tool-specific storage for tape, pad, pens, pencils, screwdriver, utility knife, and pliers
• Accepts work belts up to 2 inches wide
• Industrial 2-ply Cordura fabric with foam core for structure
• Made in the USA

Occidental Leather 9512 Applications

• Punch list jobs and service calls
• Inspections and light-duty tasks
• Field technician essentials carry
• Belt-mounted tool organization

Occidental Leather 9512 Installation Overview

1. Slide the pouch onto a work belt up to 2 inches wide.
2. Position the pouch for comfortable access.
3. Load tools into the dedicated holders.
4. Ensure items are seated securely before use.

Occidental Leather 5024 Features

• Extra deep 10 in open pouch for maximum capacity
• Full grain leather construction for long term durability
• Minimalist design without internal tool holders
• Belt mount for easy integration with tool belts
• Made in the USA

Occidental Leather 5024 Applications

• Carrying fasteners and hardware
• Stowing bulky or odd shaped tools
• General purpose jobsite carry on a work belt

Occidental Leather 5024 Installation Overview

1. Slide the pouch onto your work belt through the belt loop.
2. Position for preferred reach on dominant or opposite side.
3. Load tools or fasteners into the main pocket.
4. Adjust load for balance and secure carry.

Occidental Leather 5070 Key Features

• All-leather build for long-term durability
• 11 total pockets and holders for drywall and lathing tools
• Main bag measures 8 in W x 6 in H
• Right-side dominant layout; worn on right side of body
• Fits 3 in work belts
• Made in the USA
• Approximate weight: 1.4 lbs

Occidental Leather 5070 Applications

• Organizing and carrying drywall cutting and shaping tools
• Lathing tasks requiring quick access to snips, knives, and saws
• Jobsite layout and marking with pencils and scribes
• General drywall installation and finishing support

Occidental Leather 5070 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Position on the right side for dominant-hand access.
3. Load tools into dedicated holders to balance weight.
4. Adjust belt and pouch position for comfort and reach.
5. Inspect rivets and stitching periodically during use.

Occidental Leather B5018DBLH Features

• 11 pockets and tool holders for common carpentry tools
• Main bag 9 x 8; outer bags 5 x 5.5 for organized access
• Integrated tape holster fits tapes up to 35 ft
• Premium black leather construction; left hand model
• Made in the USA

Occidental Leather B5018DBLH Applications

• Carry and organize chisels, knives, pencils and markers
• Secure holster for 35 ft tape measures
• Hold torpedo level and hammer for framing and finish work
• Left-side wear for left-hand tool access

Occidental Leather B5018DBLH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the left side for left-hand access.
3. Load tools into designated pockets and holders.
4. Place tape measure in the built-in holster.
5. Verify balance and adjust belt for comfort.