May Bestsellers

Occidental Leather 5055 Features

• Even load distribution for reduced hip and back fatigue
• Padded, contoured yoke lined with Dri-Lex for moisture wicking
• Chest pockets for pencils and clip-on items on both sides
• Easy on-off with adjustable chest strap
• Heavy-duty D-ring for hanging the rig
• One size fits most
• Made in USA

Occidental Leather 5055 Applications

• Support and stabilize loaded tool belts during long shifts
• Improve comfort and reduce strain for framing and carpentry work
• Keep suspenders and straps securely positioned while moving
• Hang up belt rig between tasks using center D-ring

Occidental Leather 5055 Installation Overview

1. Attach the leather loop connectors to your work belt (up to 3 in).
2. Clip the suspender straps to the belt loops.
3. Adjust the chest strap for a secure, comfortable fit.
4. Set strap lengths to distribute weight evenly across shoulders.
5. Confirm all connections are secure; D-ring is for hanging only.

Occidental Leather 5009 Features

• Heavy duty bridle leather construction
• Large wool lined shoulder pads for comfort
• Spring clip attachment with loop hardware
• Fully adjustable straps
• Made in USA

Occidental Leather 5009 Applications

• Distribute tool belt weight for reduced strain
• Stabilize heavy tool rigs during carpentry or framing
• Attach to Occidental and other work belts using clips
• Comfort support for long jobsite days

Occidental Leather 5009 Installation Overview

1. Attach spring clips and loop hardware to your work belt.
2. Position suspenders so pads rest on shoulders.
3. Clip suspenders to belt front and rear attachment points.
4. Adjust strap length evenly for desired fit.
5. Check all clips and loops for secure connection before use.

Occidental Leather 8580M Features

• Hand-specific tool holder layout for efficient workflow
• Padded two-ply bags maintain shape when empty or loaded
• Extremely abrasion-resistant industrial nylon exterior
• Full leather boot with distinctive FatLip leather mouth
• 3 in HD Ranger belt with rear 2-in-1 tool and hammer holder
• Pockets and tool holders: 25
• Made in USA

Occidental Leather 8580M Applications

• Framing and production carpentry
• General carpentry and remodeling
• Jobsite organization for tools and fasteners
• Finish work requiring hand-specific pouch layout

Occidental Leather 8580M Installation Overview

1. Put on the belt over your typical work clothing and note the hole you use.
2. Remove the belt, lay it flat, and measure from the end of the buckle to that hole.
3. Select Medium if your measurement is near 37 in; adjust using the midpoint hole for fit.

High Mount Hammer Holder Key Features

• High-mount profile reduces hammer swing
• 10 oz full-grain belting leather construction
• Heavy-duty 2.5 inch steel loop fits most hammers
• Fits work belts up to 3 inches wide
• Compact, comfortable carry; Made in the USA

High Mount Hammer Holder Applications

• Framing and roofing tasks
• Overhead work and ladder use
• Tight-space maneuvering
• General jobsite tool belt organization

High Mount Hammer Holder Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position at preferred height for a high-mount carry.
3. Insert hammer through the 2.5 inch steel loop.
4. Verify secure fit and comfortable clearance while moving.

Occidental Leather 8581 Key Features

• FatLip leather mouth keeps the bag formed, open, and protected from abrasion
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated sleeves and pouches for tri-square, cat's paw, nail sets, and driver bits
• Accepts belts up to 3 in wide
• Made in the USA

Occidental Leather 8581 Applications

• Carrying nails, screws, and common fasteners
• Organization for angle square, tri-square, and layout tools
• Holstering cat's paw and driver bits for framing and drywall tasks
• General construction use on the non-dominant side

Occidental Leather 8581 Installation Overview

1. Slide the bag onto a work belt up to 3 in wide.
2. Wear on the left side for right-handed setups.
3. Load fasteners and tools into main and outer compartments.
4. Seat the angle square in the built-in holster and secure small bits in dedicated pouches.
5. Verify comfortable position and accessibility before work.

Occidental Leather 5080DB-XL Key Features

• Premium top-grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand-specific layout supports natural workflow
• Copper-riveted reinforcement at stress points
• Built-in tape holster fits tapes up to 30 ft FatMax
• Made in USA

Occidental Leather 5080DB-XL Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Daily professional construction use

Occidental Leather 5080DB-XL Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm XL sizing.
2. Position tool bag on dominant hand side; fastener bag on opposite side.
3. Adjust belt to midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners; use NoSpill holders and tape holster as intended.
5. Re-check fit and balance before use.

Occidental Leather 8582 Key Features

• 10 in deep bag with full leather boot for structure and durability
• Leather FatLip mouth holds shape, stays open, and protects against abrasion
• Right-side layout for tools most accessed with the right hand
• 13 total pockets and holders for organized storage
• Made in the USA

Occidental Leather 8582 Applications

• Organizing and carrying hand tools on the jobsite
• Carpentry and framing tool storage
• General construction and remodeling
• Punch list and service work

Occidental Leather 8582 Installation Overview

1. Thread the pouch onto your work belt.
2. Wear on the right side for right-hand access.
3. Load tools into the dedicated pockets and holders.
4. Verify secure fit and balanced weight before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5018DB Features

• 11 total pockets and tool holders for efficient organization
• Integrated tape holster fits tapes up to a 35 ft FatMax
• Hammer loop for quick access
• Premium leather construction, made in USA
• Right-side wear for dominant hand access; left-hand version available

Occidental Leather 5018DB Applications

• General carpentry and framing tool organization
• Finish work where frequent tool access is required
• Jobsite carry for measuring, marking, and cutting tools

Occidental Leather 5018DB Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Position on the right side for dominant hand access.
3. Secure the tape, hammer, and hand tools in designated holders.
4. Confirm balance and adjust placement for comfort.

Occidental Leather 5080LG Key Features

• Premium top grain leather construction
• Hand specific tool holders for working rhythm
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders
• Left handed option available as 5080LH
• Made in USA

Occidental Leather 5080LG Applications

• Framing and general carpentry tool carry
• On site construction and renovation
• Efficient organization of fasteners and hand tools
• Daily use by professional builders

Occidental Leather 5080LG Installation Overview

1. Place belt over typical work clothing where it will be worn.
2. Measure from the buckle to the hole you use most.
3. Select the belt size mid range closest to that measurement.
4. Adjust using the 9 holes and position bags and holders as preferred.

Occidental Leather 5589 Key Features

• All leather commercial grade electricians case
• 25 pockets and holders for comprehensive tool organization
• Heavy duty electrical tape chain and metal utility clip
• Right side wear layout for right handed users
• Black leather tool holders with reinforced stitching
• Made in USA

Occidental Leather 5589 Applications

• Commercial and residential electrical work
• Organizing and carrying pliers, strippers, screwdrivers, and meters
• Quick access to electrical tape, markers, and small tools

Occidental Leather 5589 Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Position on the right side for right handed workflow.
3. Load frequently used tools into front holders; place bulk items in the main bag.
4. Attach electrical tape to the chain and clip small items to the utility clip.
5. Adjust placement on belt for comfort and balance.

Occidental Leather 5191 M Features

• Unique one-piece toolbelt assembly for balanced load
• Premium top-grain leather construction
• Sheepskin-lined interior for comfort
• Hand-specific tool holders with NoSpill system
• Copper-riveted main bags for durability
• Function-engineered layout based on 5060 and 5018 bags
• Made in USA

Occidental Leather 5191 M Applications

• Framing and general carpentry tool organization
• Remodeling projects requiring quick tool access
• Finish and trim work with hand-specific layout
• Jobsite setups needing secure, no-spill holders
• Daily professional use in demanding outdoor conditions

Occidental Leather 5191 M Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove and lay belt flat; measure from buckle end to the used hole.
3. Match measurement to size chart; select Medium if midpoint is 37 in.
4. Adjust fit using the midpoint hole with 4 in range each way.

Occidental Leather 9515 Features

• Adjustable fit for pant waist 32 to 41
• Fixed bag design prevents shifting
• D rings pre-installed for suspender attachment
• Padded two-ply bags hold their shape
• Extremely abrasion-resistant industrial nylon
• Leather tool holders and corner reinforcement
• Includes High Mount Hammer Holder 5059
• Hand-specific tool placement for efficient workflow
• Left-handed model available as 9515LH

Occidental Leather 9515 Applications

• Framing and rough carpentry
• Jobsite tool and fastener organization
• Use with suspender systems via pre-installed D rings
• Seasonal gear changes requiring belt size adjustment
• Daily professional construction work

Occidental Leather 9515 Installation Overview

1. Measure where you wear your tool belt and set belt size to fit 32 to 41 pant waist.
2. Position tool bag on dominant side and fastener bag on opposite side.
3. Secure the belt and lock the adjust-to-fit crossover system.
4. Attach the removable hammer holder and any suspenders to D rings.
5. Load tools and fasteners; confirm bags are fixed and balanced.

Occidental Leather 5017DB Key Features

• Most popular layout without a tape pocket
• Double outer bags for added organization
• Holders for hammer, pencils, knife, crayon, chisel, torpedo level
• Right side wear for tools accessed with the right hand
• Available in left hand version as 5017DBLH
• Made in USA

Occidental Leather 5017DB Applications

• Organizing core hand tools on the jobsite
• Framing and general carpentry work
• Remodeling and installation tasks
• Trim and finish carpentry tool carry
• Daily use on professional work belts

Occidental Leather 5017DB Installation Overview

1. Slide the bag onto a work belt up to 3 inches wide.
2. Position on the right side for right hand access.
3. Load tools into main and outer pockets and holders.
4. Adjust placement for balance and comfort.
5. Securely fasten belt and verify easy access to tools.

Occidental Leather 5047 Key Features

• Combo layout holds utility knife, two pencils, and a tape measure
• Accepts 35 ft tape or 25 ft FatMax; works as a chalk line holster
• Streamlined, lightweight design for finish work and tight spaces
• Rugged leather construction; riveted for durability
• Fits belts up to 3 inches wide; made in USA

Occidental Leather 5047 Applications

• Finish carpentry and punch list tasks
• Carrying tape, knife, and pencils for quick measurements and marking
• Chalk line holstering for layout work
• Streamlining tool access on compact belt setups

Occidental Leather 5047 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Seat the tape measure in the front pocket; remove the tape clip if needed for proper fit.
3. Allow leather to break in for snug, secure seating.
4. Insert utility knife and two pencils into their sleeves.
5. Verify comfortable placement and retention before use.

Occidental Leather 5328 Key Features

• Made in the USA
• 10 oz Latigo belting leather construction
• Heavy-duty spring steel belt clip
• Italian-style drop clasp
• Clips to belts up to 2 inches wide
• Sized for larger smartphones (iPhone Plus and similar)

Occidental Leather 5328 Applications

• Keep smartphones secure and accessible on the jobsite
• Belt-mounted carry for larger phones
• Protection from bumps, dust, and debris
• Everyday use for trades and field work

Occidental Leather 5328 Installation Overview

1. Attach the holster by clipping it to a belt up to 2 inches wide.
2. Place the phone inside the holster.
3. Close the drop clasp to secure the phone.
4. Check that the clip is fully engaged before use.

Occidental Leather 5022 Key Features

• Top-grain leather construction for comfort and durability
• Non-marring surface helps prevent floor scuffs
• High-density padding with inner plastic shield minimizes pressure points
• Quick release fasteners for easy on and off
• Made in the USA

Occidental Leather 5022 Applications

• Interior remodeling and finish work
• Flooring installation without scuffing surfaces
• General jobsite knee protection

Occidental Leather 5022 Installation Overview

1. Place pads over knees with curved edge down.
2. Secure quick release buckles and straps.
3. Adjust for snug, comfortable fit; avoid overtightening.
4. Verify pads do not shift during movement.

Occidental Leather 5026 Key Features

• Quick clip point for tape measures, clip on pouches and meters
• Fits belts up to 3 inches; accepts clips up to 1 inch
• Leather loop with steel rectangular ring for durability
• Compact add on for any tool belt
• Made in USA

Occidental Leather 5026 Applications

• Attach tape measures to your belt
• Hang small clip on bags or meter cases
• Add an extra hook point to existing tool belts
• Organize frequently used clip on tools

Occidental Leather 5026 Installation Overview

1. Slide the loop onto a work belt up to 3 inches wide.
2. Position where convenient on your belt.
3. Attach clip on tools or accessories with clips up to 1 inch wide.

Occidental Leather 6104 Key Features

• Streamlined 2-pouch utility design
• No tool holders inside or outside for simple storage
• Durable leather construction
• Lightweight and compact for belt setups
• Made in the USA

Occidental Leather 6104 Applications

• Storing fasteners and small hardware
• Carrying loose hand tools
• Expanding capacity on a tool belt
• Organizing overflow items on the jobsite

Occidental Leather 6104 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position for preferred access on your belt setup.
3. Load fasteners or small tools into main and outer pouches.
4. Check balance and adjust placement as needed.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather 5156 Key Features

• Steel cradle style holder for secure hammer carry
• 2 in. belt slot sized for narrow belts
• Steel hardware riveted to extra heavy leather back
• Compatible with 2 in. Leather Work Belt 5002 and Stronghold Beltless rear strap
• Made in the USA

Occidental Leather 5156 Applications

• Secure hammer carry on 2 in. belts
• Framing and carpentry belt setups
• Use with beltless suspenda style rear straps
• General construction and remodeling

Occidental Leather 5156 Installation Overview

1. Thread a 2 in. belt through the two vertical slots.
2. Position holder at desired location on the belt or rear strap.
3. Tighten belt and ensure the holder sits flat against your side.
4. Insert hammer into steel cradle and check for secure fit.

Occidental Leather 6101 Features

• Trim-ready compact leather design for finish work
• Tool-specific holders for nail sets, blade square, and cat's paw
• Streamlined layout reduces bulk and keeps tools organized
• No angle square holster
• Made in USA
• Left-hand version available as 6101LH

Occidental Leather 6101 Applications

• Trim and finish carpentry
• Light framing tasks
• Interior remodel and punch list work
• Organizing fasteners and layout tools on the left side

Occidental Leather 6101 Installation Overview

1. Attach the bag securely to your work belt.
2. Load fasteners and layout tools into dedicated pockets.
3. Wear on the left side for easy left-hand access.

Occidental Leather 9085 Features

• Purpose-built tool organization in a compact case
• 18 pockets and tool holders for screwdrivers, chisels, bits, and more
• Leather-lined bottom enhances durability and shape retention
• Four rigid interior walls keep tools upright
• Includes 2 Oxy Tool Shields for sharp tool protection
• Made in the USA

Occidental Leather 9085 Applications

• Finish carpentry tool organization
• Plant engineering and maintenance kits
• On-the-go tool access for service professionals
• Upright storage for hand tools and accessories

Occidental Leather 9085 Installation Overview

1. Load tools into dedicated pockets and holders.
2. Place sharp tools in the included Oxy Tool Shields.
3. Attach the case securely to your work belt.
4. Arrange tools upright using interior dividers for quick access.

Occidental Leather 5085 Key Features

• 17 pockets and holders for organized storage inside and out
• Divided interior for separated, easy-to-reach tool access
• Quick-release snap and strap for electrical tape
• Holster fits a 35 ft x 1 in tape measure
• Constructed from 8 oz top grain leather; Made in USA
• Tunnel loop fits up to a 3 in work belt

Occidental Leather 5085 Applications

• Organizing hand tools for jobsite or shop use
• Carrying screwdrivers, pliers, knives, chisels, markers, and strippers
• Holding torpedo level, hammer, and tape measure
• Attaching to belts up to 3 in for hands-free access

Occidental Leather 5085 Installation Overview

1. Thread a work belt (up to 3 in wide) through the tunnel loop.
2. Position the case at preferred location on your belt.
3. Load tools into divided pockets for balanced weight.
4. Secure tape to the strap and attach items to the quick-release snap as needed.
5. Verify pockets and snap are closed before use.