May Bestsellers

Occidental Leather 9855LH Features

• Adjust-to-Fit belt for pant waist 32 in to 41 in
• D rings pre installed for suspenders
• FatLip bag design with structured mouth
• Hand specific tool holders for improved rhythm
• Rear 2 in 1 tool and hammer holder; includes Oxy Tool Shield
• Made in USA

Occidental Leather 9855LH Applications

• Production carpentry tool carry and organization
• Framing and layout work
• General jobsite fastening and measuring tasks
• Use with suspension systems for extended wear

Occidental Leather 9855LH Installation Overview

1. Measure and adjust belt to fit within 32 in to 41 in range.
2. Position tool and fastener bags for left handed layout.
3. Attach hammer holder and accessories to belt loops.
4. Load tools and fasteners; confirm balanced carry.
5. Optionally connect suspenders to pre installed D rings.

Occidental Leather 5013 Key Features

• Holds most pliers and side cutters
• Ideal for Felco and other pruning shears
• Durable leather construction with closed bottom
• Fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5013 Applications

• Carry pruning shears for landscaping and gardening
• Keep pliers or side cutters accessible on the jobsite
• Organize everyday tools on a work belt

Occidental Leather 5013 Installation Overview

1. Slide the holster onto a belt up to 3 in. wide.
2. Seat the tool fully into the pocket.
3. Confirm the holster sits securely and does not obstruct movement.

Occidental Leather B8080DBSM Key Features

• Hand-specific tool holder layout for efficient workflow
• Double-wall padded nylon bags maintain structure
• Abrasion-resistant industrial nylon construction
• 12 oz belting leather belt with steel roller buckle
• Leather-reinforced corners and tool holders

Occidental Leather B8080DBSM Applications

• Framing and rough carpentry
• General construction tool carry
• Jobsite fastener and tool organization

Occidental Leather B8080DBSM Installation Overview

1. Measure belt fit from buckle end to your most used hole to confirm size.
2. Attach both outer bags to the belt in your preferred handed layout.
3. Secure the hammer holder at rear center and tighten belt at midpoint hole.
4. Load tools and fasteners; adjust pouch positions for balance and access.
5. Verify all rivets, snaps, and holders are seated before use.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather B5055 Features

• Even load distribution to relieve hip and lower back strain
• Padded, contoured yoke with sweat-wicking lining
• Secure fit keeps straps from wandering off shoulders
• Tool-friendly chest pockets on both sides
• Heavy-duty center D ring for hanging your rig
• Leather loop attachment system fits up to a 3 in. belt
• Made in USA

Occidental Leather B5055 Applications

• Support and stabilize heavy tool belts during daily use
• Reduce lower back and hip fatigue on framing and carpentry jobs
• Keep rigs balanced when carrying bulky tools and fasteners
• Quickly hang up complete belt systems between tasks

Occidental Leather B5055 Installation Overview

1. Attach leather loops to your tool belt (up to 3 in. width).
2. Connect front clips and set the chest strap to a comfortable tension.
3. Adjust strap lengths for even weight distribution.
4. Check shoulder yoke alignment and secure fit before use.
5. Use the center D ring to hang the rig when removing.

Occidental Leather 5191XL Key Features

• Unique one-piece tool belt assembly for balanced load distribution
• Premium top-grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper-riveted main bags for durability
• NoSpill tool holder system keeps tools secure
• Sheepskin-lined interior for comfort
• Made in USA
• Not available as left-hand model; suggested 9550LH

Occidental Leather 5191XL Applications

• Framing and general carpentry
• Remodeling and residential construction
• Jobsite tool organization and carry
• Finish carpentry tool layout

Occidental Leather 5191XL Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove the belt and measure from the buckle end to that hole to confirm size.
3. Adjust fit using midpoint hole; 4 inches of adjustment each way.
4. Load tools into hand-specific holders; secure sharp tools in dedicated holsters.
5. Verify balanced weight before use.

Occidental Leather 6530 Features

• Designed for standard 2.5 in round chew or dip cans
• 2 in proprietary steel belt clip; fits belts or waistbands up to 2 in wide
• Full-grain leather construction in classic OxBlood red
• Embossed Occidental Leather logo
• Made in USA

Occidental Leather 6530 Applications

• Jobsite carry for chew or dip cans
• Framing, welding, and general trades work
• Everyday belt or waistband accessory
• Walking the site while keeping hands free

Occidental Leather 6530 Installation Overview

1. Slide the steel clip onto a belt or waistband up to 2 in wide.
2. Insert the 2.5 in can into the leather holster.
3. Check retention and adjust holster position for easy access.
4. Remove the holster by lifting the clip and sliding off the belt.

Occidental Leather B5080DBLH M Key Features

• Premium top grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand specific tool layout for efficient workflow
• Copper rivets reinforce stress points
• Function driven design for professional framers

Occidental Leather B5080DBLH M Applications

• Framing and rough carpentry
• General jobsite tool and fastener carry
• Remodeling and construction tasks
• Layout work with tape and square holsters
• Left handed workflow setups

Occidental Leather B5080DBLH M Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to determine belt size.
2. Select Medium if your midpoint measurement is about 37 in.
3. Attach tool and fastener bags to the belt with tool bag on the left and fastener bag on the right for left handed use.
4. Secure hammer holder and adjust belt to a comfortable fit.
5. Load tools and verify access and balance.

Occidental Leather 8551 Features

• 2 inch steel clip enables fast on and off attachment
• Drawstring closure secures fasteners and small tools
• Dual layer 1000D sides and 1050D bottom for wear resistance
• Clips to most belts or waistbands up to 2 inches wide
• Made in the USA

Occidental Leather 8551 Applications

• Carry nails, screws, and small parts on the job
• Quick access storage for trim shims and wedges
• Add on pouch for tool belts and work vests
• Lightweight parts holder for service and install work

Occidental Leather 8551 Installation Overview

1. Slide or clip the pouch onto a belt or waistband up to 2 inches wide.
2. Load with fasteners or small tools.
3. Pull the drawstring to secure contents as needed.
4. Release the clip to remove when finished.

Occidental Leather 5135 XXL Key Features

• 5 in. wide belt for enhanced back support
• Built-in suspender attachment loops
• Thick padded wool liner for comfort and moisture control
• Heavy duty buckles and belt loops minimize bag sliding
• Edge stitched leather for added strength

Occidental Leather 5135 XXL Applications

• Securely carry tool bags and pouches
• Provide back support during long workdays
• Use with suspenders for balanced load distribution
• Carpentry, framing, and general construction tasks
• Comfortable wear over layered work clothing

Occidental Leather 5135 XXL Installation Overview

1. Measure your current tool belt from buckle end to the hole you use.
2. Select size based on midpoint measurement; size up if between.
3. Wear over typical work clothing and fasten at the midpoint hole.
4. Attach tool bags to the overbelt loops; tighten to prevent sliding.
5. Clip suspenders to built-in loops for added support if needed.

Occidental Leather 9515LH Key Features

• Fully adjustable for 32 in to 41 in pant waists; ideal for seasonal clothing changes
• D-rings pre-installed for use with suspension systems
• Hand-specific, left-handed layout promotes efficient workflow
• Padded two-ply bags keep their shape
• Extremely abrasion-resistant industrial nylon with leather corner reinforcement
• Removable High Mount Hammer Holder 5059 on rear
• Made in USA

Occidental Leather 9515LH Applications

• Framing and rough carpentry setups
• General construction and remodeling tool carry
• Jobsite organization for left-handed pros
• Use with suspenders via integrated D-rings

Occidental Leather 9515LH Installation Overview

1. Adjust belt to fit 32 in to 41 in pant size using the buckle and crossover system.
2. Position bags and hammer holder to preferred left-handed layout.
3. Secure D-rings to suspenders if desired.
4. Load tools and fasteners; verify bags are balanced and secure.

Occidental Leather 5018DBLH Key Features

• Double outer bag design for organized storage
• Holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape holster fits tapes up to 35 ft
• Left handed layout worn on the left side
• Premium leather construction

Occidental Leather 5018DBLH Applications

• Daily carry of hand tools on the jobsite
• Framing and carpentry tool organization
• Finish work where quick access to small tools is needed
• Measuring and marking with onboard tape and pencil holders

Occidental Leather 5018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the tape measure in the holster.
4. Load essential tools into designated pockets and holders.
5. Confirm balanced weight and comfortable reach before use.

Occidental Leather B5068 Features

• All-leather construction for long-term durability
• Snap closure secures calculator and allows quick access
• Fits up to a 3 inch work belt
• Compatible with Construction Master models I, II, III, IV and other brands
• Also available as clip-on model B6568

Occidental Leather B5068 Applications

• Jobsite calculator protection and portability
• Belt-mounted storage for quick measurement access
• Secure carry while walking, climbing, or working

Occidental Leather B5068 Installation Overview

1. Slide the case onto a belt up to 3 inches wide.
2. Insert the calculator into the pouch.
3. Close the snap to secure and check fit.

Occidental Leather B8018DB Key Features

• Most popular OxyLights tool bag
• Integrated tape holder fits up to 35 ft FatMax
• Tool-specific holders plus hammer loop for fast access
• Right-side orientation; not offered in left-hand model
• Durable leather and nylon construction

Occidental Leather B8018DB Applications

• Everyday carry of layout and cutting tools
• Framing and finish tasks requiring fast access to hand tools
• Jobsite organization with right-hand dominant layouts
• Tape, level, and marking tool storage on belt systems

Occidental Leather B8018DB Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into the dedicated holders and main pockets.
4. Place a tape measure in the leather holder; verify secure fit.
5. Check balance and adjust belt for comfortable carry.

Occidental Leather 9520LH Features

• Compact, lightweight bag ideal for trim, framing and finish work
• Round-bottom nylon main and outer bags for durability and easy access
• Speed square holder usable inside or outside
• Patented 2-in-1 outer bag increases fastener capacity
• Left-handed layout worn on right side for right-hand access
• Includes 2003 Oxy Tool Shield for sharp tool protection

Occidental Leather 9520LH Applications

• Trim carpentry organization and fastener access
• Framing tasks requiring quick tool retrieval
• Finish work where compact storage is preferred
• Left-handed setups worn on right side

Occidental Leather 9520LH Installation Overview

1. Attach bag securely to your work belt.
2. Position on the right side for left-handed layout.
3. Load fasteners and tools into main and 2-in-1 outer bag.
4. Place speed square in the designated holder (inside or outside).
5. Store sharp tools in the included Oxy Tool Shield.

Occidental Leather B5060LH Key Features

• Left-handed layout worn on the right side for quick access
• Three stacked pouches with top-access tier
• 9 pockets and tool holders for common layout tools
• Premium leather construction for long-term durability
• Made in the USA

Occidental Leather B5060LH Applications

• Framing and rough carpentry fastener storage
• General carpentry and remodel tasks
• Organizing layout squares, bits, and small tools

Occidental Leather B5060LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side to suit left-handed setups.
3. Load fasteners and layout tools into the designated pockets.
4. Check balance and adjust position for comfort.

Occidental Leather 8087 M Key Features

• 20 pockets and tool holders
• Hand-specific tool organization
• Padded two-ply bags maintain structure
• Abrasion-resistant industrial nylon with leather reinforcement
• Made in USA

Occidental Leather 8087 M Applications

• Metal framing and stud work
• Finish carpentry tasks
• Remodeling and general construction
• Organizing fasteners, layout tools, and clamps
• Holstering impact drivers or screw guns

Occidental Leather 8087 M Installation Overview

1. Measure and select the correct belt size; fasten at midpoint hole.
2. Attach included bags and holders to the 3" Ranger belt.
3. Adjust belt fit for comfort and balance.
4. Load tools and fasteners; place driver in the gun holster.
5. Verify secure attachment points and even weight distribution.

Occidental Leather 8585LHM Key Features

• Left-handed layout
• Leather FatLip bag mouth for structure and abrasion resistance
• Full leather boot with 10 in deep industrial nylon bags
• Hand-specific tool holders and padded two ply construction
• 25 pockets and holders; Made in USA

Occidental Leather 8585LHM Applications

• Framing and rough carpentry
• General construction and remodeling
• Finish and trim tasks requiring organized fasteners and tools
• Jobsite setups needing left-handed tool access

Occidental Leather 8585LHM Installation Overview

1. Measure an existing belt to confirm medium belt size.
2. Position the belt over work clothing and adjust for comfort.
3. Arrange tool and fastener bags on the left-handed layout.
4. Secure the hammer holder and clip-on accessories.
5. Load tools and verify balanced weight and access.

Occidental Leather 8080DBLH XXL Key Features

• 20 pockets and tool holders
• Hand-specific leather tool holders for efficient workflow
• Padded two-ply nylon bags maintain shape
• Industrial nylon with leather corner reinforcement for abrasion resistance
• Made in USA

Occidental Leather 8080DBLH XXL Applications

• Framing and general carpentry tool organization
• Jobsite fastener and tool carrying
• Left-handed workflows requiring hand-specific layout

Occidental Leather 8080DBLH XXL Installation Overview

1. Measure and select the correct XXL belt size.
2. Slide tool and fastener bags onto the Ranger belt.
3. Attach the hammer holder at the rear center slot.
4. Adjust belt to preferred hole and secure fit over work clothing.
5. Load tools and fasteners; verify balanced, left-handed layout.

Occidental Leather B5135 LG Key Features

• 5 in wide belt provides added back support
• Suspender attachment loops for optional load distribution
• Thick padded, moisture wicking interior for comfort
• Heavy duty buckles and belt loops minimize bag sliding
• 2 in all leather overbelt keeps pouches stable
• Nickel plated steel hardware; edge stitched for strength
• Handcrafted in the USA

Occidental Leather B5135 LG Applications

• Carrying and stabilizing tool pouches on the jobsite
• Reducing lower back strain during all day wear
• Use with suspenders for added weight distribution
• General construction, carpentry, electrical, and finish work

Occidental Leather B5135 LG Installation Overview

1. Select correct size; position belt around waist over work pants.
2. Thread tool bags onto the overbelt and place in desired positions.
3. Buckle the belt and tighten to a comfortable, secure fit.
4. Attach suspenders to the loops if using for extra support.
5. Recheck fit and adjust pouch spacing as needed.

Key Features

• Wide 5 in belt for enhanced back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• Heavy-duty buckles and belt loops minimize bag sliding
• 2 in all-leather overbelt; edge-stitched for strength
• Made in the USA

Applications

• Supporting tool bags and pouches on the jobsite
• Use with suspenders via integrated attachment loops
• Comfortable heavy-duty belt for framing, finish, or general carpentry

Installation Overview

1. Put the belt on over typical work clothing where you will wear it.
2. Measure from the buckle to the hole you use; that measurement is your belt size.
3. Select size XL (approx. 45 in belt size) and adjust using the 9-hole range.
4. Attach tool bags to the overbelt and secure through the belt loops.
5. Clip suspenders to the attachment loops if desired and check fit.

Occidental Leather 5135 LG Key Features

• 5 in wide belt for back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy-duty buckles and belt loops minimize bag movement
• Edge-stitched leather construction
• Made in USA

Occidental Leather 5135 LG Applications

• Daily wear with Occidental tool bags and systems
• Added back support for heavy tool loads
• Suspender-compatible setups for long shifts
• Carpentry, framing, electrical, and general construction

Occidental Leather 5135 LG Installation Overview

1. Measure an existing tool belt from buckle tip to your used hole to confirm size.
2. Select Large (41 in mid range) and adjust using the 9-hole range.
3. Attach tool bags to the overbelt and secure using belt loops.
4. Connect suspenders to the attachment loops as needed.
5. Check fit and tighten buckles to prevent sliding.

Occidental Leather B8554 Features

• 2 inch belt clip for quick attachment and removal
• Drawstring closure helps retain contents
• Durable build with dual layer 1000D nylon sides and 1050D nylon bottom
• Tall size: 5 in diameter x 8.5 in high
• Made in the USA

Occidental Leather B8554 Applications

• Holding fasteners, shims, and small hand tools
• Clip on storage for belts and vests
• Jobsite organization and quick access

Occidental Leather B8554 Installation Overview

1. Slide or clip the 2 inch belt clip onto your belt or strap.
2. Load tools or fasteners into the pouch.
3. Cinch the drawstring to secure contents.
4. Release clip to reposition or remove as needed.

Occidental Leather 8552 Key Features

• 2 inch belt clip for fast on off attachment
• Drawstring closure keeps contents secure yet accessible
• Dual layer 1000D nylon sides and 1050D nylon bottom for wear resistance
• Medium size: 6 in diameter x 7 in high
• Made in the USA

Occidental Leather 8552 Applications

• Carry fasteners, anchors, and small hardware
• Quick access storage for bits and small hand tools
• Add on pouch for tool belts and vests
• Jobsite organization for installers and carpenters

Occidental Leather 8552 Installation Overview

1. Slide the 2 inch clip over your belt, pocket, or strap.
2. Load hardware or tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Release the clip to reposition or remove as needed.