Leather Nail & Fastener Bags

Occidental Leather 8581 Features

• FatLip™ leather mouth keeps the bag formed, open, and protected
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Tri-square sleeve, cat’s paw loop, and external nail set/driver bit pouches
• 10 pockets & tool holders for efficient organization
• Designed to be worn on the non-dominant side for fastener access
• Made in the USA

Occidental Leather 8581 Applications

• Framing: Keep nails, angle square, and layout tools at hand
• Drywall installation: Store fasteners and driver bits for quick access
• General construction: Organize common hand tools and fasteners
• Remodeling: Versatile pouch setup for mixed trades

Occidental Leather 8581 Installation Overview

1. Thread the bag onto a compatible 3″ work belt.
2. Position on the non-dominant side for fastener access.
3. Load tools and fasteners into main, outer, and upper pockets.
4. Seat the angle square in the integrated holster; place tri-square and cat’s paw in their sleeves.
5. Verify comfortable reach and balance before use.

Occidental Leather 5062 Key Features

• 4-pouch stacked layout for expanded capacity
• 10 pockets and tool holders sized for fasteners and layout gear
• Dedicated slots for 1" blade square, angle square, driver bits, and cat’s paw
• Full-grain leather construction for durability
• Designed to be worn on the non-dominant side
• Made in the USA

Occidental Leather 5062 Applications

• Framing and general carpentry fastener storage
• Organizing layout tools and driver bits on belt
• Daily jobsite use where rugged leather pouches are preferred

Occidental Leather 5062 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the non-dominant side for balanced access.
3. Load fasteners and tools into the designated pockets and holders.
4. Check that the pouch is secure and pockets are seated before work.

Occidental Leather 5060 Features

• Three stacked pouches with top-access tier for efficient fastener storage
• 9 pockets and tool holders for layout tools and bits
• Dedicated holders fit cat’s paw, driver bits, angle square, and 1" blade square
• Premium, reinforced leather construction
• Available in left- or right-hand setups and multiple colors
• Made in the USA

Occidental Leather 5060 Applications

• Framing: Keep nails and layout tools at hand
• General carpentry: Organized storage for daily tools and fasteners
• Jobsite setup: Streamlined access to squares, bits, and cat’s paw

Occidental Leather 5060 Specifications

Occidental Leather 8062 Key Features

• Same features as the 8060 with an added outer pouch
• 10 pockets & tool holders with dedicated storage for squares, driver bits, and cat’s paw
• Streamlined layout for compact carry
• Optimized for left-side wear (fasteners accessed with left hand)
• OxyLights nylon construction with leather reinforcements
• Made in USA

Occidental Leather 8062 Applications

• Framing tasks needing organized fastener access
• General carpentry where compact storage is preferred
• Left-side wear for non-dominant hand tool retrieval
• Jobsite organization for squares, bits, nail sets, and small tools

Occidental Leather 8062 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for non-dominant hand access.
3. Load tools and fasteners into the designated pockets.
4. Confirm the bag is seated securely on the belt.
5. Adjust placement for comfortable reach and balance.

Occidental Leather 5061 Features

• All-leather construction for daily jobsite durability
• 9 pockets and holders arranged for efficient fastener and tool access
• Left-side tape holster in place of an upper bag
• Holds angle square, cat’s paw, driver bits, and more
• Available in right-hand (5061) and left-hand (5061LH) layouts
• Made in the USA

Occidental Leather 5061 Applications

• Framing and rough carpentry layouts
• Finish carpentry fastener organization
• General carpentry and remodel tool storage

Occidental Leather 5061 Installation Overview

1. Select right-hand (5061) or left-hand (5061LH) orientation to match your setup.
2. Slide the pouch onto your work belt through the built-in leather tunnel.
3. Position on the left side for fastener access opposite your primary tool bag.
4. Load tape, fasteners, and layout tools into dedicated pockets.
5. Adjust belt position for comfortable reach before starting work.

Occidental Leather 9520 Features

• Compact 2-in-1 outer bag adds fastener capacity without bulk
• Reinforced nylon construction with round-bottom bags that hold shape
• Built-in speed square slot for quick access
• Designed for left-side wear to access fasteners with the left hand
• Includes Oxy Tool Shield for safe storage of sharp tools

Occidental Leather 9520 Applications

• Trim carpentry: keep small fasteners and layout tools at hand
• Framing: carry nails, bits, and a speed square efficiently
• Finish work: organized storage for detail tools and hardware
• General carpentry: left-side fastener access for balanced setups

Occidental Leather 9520 Installation Overview

1. Slide the bag onto your work belt at the left side (right-handed setups) or right side (left-handed setups).
2. Seat the pouch so the round-bottom pockets face outward for easy access.
3. Load fasteners and organize tools in the main, outer, and small holders.
4. Insert the speed square into the dedicated slot as preferred (inside or outside).
5. Place sharp tools in the Oxy Tool Shield and verify comfortable reach.

Key Features

• 10 in. deep main bag for high-capacity storage
• Leather FatLip mouth keeps the bag formed, open, and protected against abrasion
• Full leather boot reinforces the base for rugged jobsite durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated sleeves/loops for tri-square, cat’s paw, nail sets or driver bits
• Pockets and tool holders: 10
• Made in the USA

Applications

• Organizing and carrying nails, screws, and small fasteners
• Quick access to angle square, driver bits, and layout tools
• Framing, drywall, and general construction tasks

Occidental Leather 5525 Key Features

• Round-bottom design adds structure and increases capacity
• 10 pockets & tool holders optimized for fasteners and layout tools
• Tape pocket holds tapes up to 35′
• Includes Oxy Tool Shield to protect sharp tools, bags, and body
• Right-hand layout; typically worn on the left side
• Made in the USA

Occidental Leather 5525 Applications

• Framing and general carpentry fastener carry
• Layout and measuring tools organization on the belt
• Jobsite tasks requiring frequent access to nails, screws, and bits
• Daily contractor use where durable leather storage is preferred

Occidental Leather 5525 Installation Overview

1. Thread the bag’s tunnel onto your work belt.
2. Position on the left side for right-handed use.
3. Load fasteners and layout tools into designated pockets/holders.
4. Place sharp tools in the included Oxy Tool Shield.
5. Check balance and adjust placement for comfortable reach.

Occidental Leather 8060 Key Features

• Lightweight OxyLights nylon construction for daily comfort
• 3-pouch layout: main, outer, and upper bags for organized access
• Tool-specific holders for blade square, angle square, cat’s paw, and driver bits
• Designed as a left-side fastener bag for framing and general carpentry
• Reinforced with leather at stress points for durability
• Made in the USA

Occidental Leather 8060 Applications

• Framing: Keep nails, layout tools, and bits organized
• General carpentry: Quick access to fasteners and small tools
• Jobsite setup: Left-hand fastener storage for balanced belt systems

Occidental Leather 8060 Installation Overview

1. Select handedness and position this fastener bag on the left side for right-handed setups.
2. Slide the bag onto a compatible work belt and secure in preferred position.
3. Load fasteners and layout tools into dedicated pockets/holders.
4. Verify balance and accessibility; adjust pouch position as needed.

Occidental Leather 6101 Features

• Trim-ready compact design ideal for finish work and interior tasks
• Tool-specific holders for nail sets/driver bits, 1” blade square, and cat’s paw sleeve
• Streamlined layout reduces bulk while organizing fasteners and tools
• Durable, professional-grade leather construction — Made in USA
• Fastener-bag layout intended for wear on the left side

Occidental Leather 6101 Applications

• Trim and finish carpentry
• Light framing and punch-list work
• Interior installation and layout tasks
• General fastener and small tool organization

Occidental Leather 6101 Installation Overview

1. Select left-side placement per fastener-bag layout.
2. Slide the bag’s tunnel onto your work belt and secure.
3. Load fasteners and hand tools into designated holders.
4. Verify comfortable reach and balance before use.

Occidental Leather 5564 Key Features

• Hybrid build: leather main bag with dual-compartment industrial nylon outer pouch
• Four total pouches for fasteners and small parts
• Six black leather tool holders for bits, cat’s paw, and layout tools
• Left-side wear for fastener access with the non-dominant hand
• Made in the USA

Occidental Leather 5564 Applications

• Electrical work: organize wire nuts, couplers, and connectors
• General carpentry: keep layout tools and small fasteners accessible
• Remodeling and finish tasks: carry driver bits and small fittings
• Jobsite service work: compact storage for frequently used parts

Occidental Leather 5564 Installation Overview

1. Thread onto a compatible work belt.
2. Position on the left side for fastener access with the non-dominant hand.
3. Load fasteners and tools into the main and divided outer pouches.
4. Secure and adjust for comfortable reach and balance.

Occidental Leather B5611 Features

• All?leather construction with classic black finish
• Side?by?side 35' tape holster plus angle square holster
• Upper bag with external sleeve pockets and drill bit holsters
• Integrated Oxy Tool Shield for sharp tools
• Reinforced back wall at stress points for long service life
• 10 total pockets/tool holders
• Made in the USA

Occidental Leather B5611 Applications

• Framing and carpentry fastener and tool carry
• Organizing tape, angle square, bits, and small hand tools
• General construction and remodel jobsite storage
• Left?side wear for right?handed workflows

Occidental Leather B5611 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right?hand access.
3. Load fasteners and tools into designated pockets/holsters.
4. Secure tape and angle square in their holsters; place sharp tools in the Oxy Tool Shield.

Occidental Leather B8064 Key Features

• 4-bag layout: main, outer, upper, and patented 2-in-1 outer pouch
• Integrated angle square holster between main and outer bags
• Dedicated holders for tri-square, cat’s paw, driver bits, and nail sets
• Right-handed layout — fastener bag is worn on the left side
• Industrial nylon with leather reinforcements for lightweight durability
• Pockets & tool holders: 10
• Made in USA

Occidental Leather B8064 Applications

• Framing and general carpentry tool and fastener organization
• Layout work requiring quick access to angle square and measuring tools
• Daily carry of nails, screws, and small hand tools on the jobsite

Occidental Leather B8064 Installation Overview

1. Thread onto a compatible work belt.
2. Position on the left side for right-handed setups.
3. Load fasteners and tools into the main, outer, and upper pouches.
4. Stow angle square in the integrated holster; place small bits in dedicated sleeves.
5. Adjust placement for comfort and balance during use.

Occidental Leather B8064LH Features

• Patented 2-in-1 outer pouch with built-in angle square holster
• Dedicated sleeves/loops for tri-square, cat’s paw, nail sets and driver bits
• Left-handed layout — worn on right side for fast access
• Lightweight OxyLights design for all-day comfort
• Made in USA

Occidental Leather B8064LH Applications

• Framing and general carpentry fastener organization
• Keeping layout tools (angle square, tri-square) readily accessible
• Storing small tools and driver bits on the jobsite

Occidental Leather B8064LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for left-handed setups.
3. Load fasteners and tools into the main, outer and upper pouches.
4. Use dedicated sleeves/loops for squares, cat’s paw and bits.

Key Features

• FatLip™ leather mouth keeps the bag open and protects against wear
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated storage for cat’s paw, tri-square, driver bits, and nail sets
• Left-handed layout — worn on the right side of the body
• Made in the USA

Applications

• Framing — fast access to nails and layout tools
• Drywall installation — organized storage for bits and fasteners
• General construction — durable pouch for daily jobsite tasks

Installation Overview

1. Wear on the right side for left-handed users.
2. Pair with your primary tool bag on the left side.
3. Load fasteners and frequently used layout tools into dedicated pockets.
4. Confirm comfortable position on your work belt before use.

Occidental Leather B5060LH Features

• Left-handed layout worn on the right side
• Three stacked pouch design with top-access tier
• 9 pockets & tool holders for efficient organization
• Dedicated holders for 1" blade square, angle square, driver bits, and cat’s paw
• Premium, reinforced leather construction
• Made in USA

Occidental Leather B5060LH Applications

• Framing tasks needing quick fastener access
• General carpentry tool and fastener organization
• Layout work with squares and driver bits
• Optimized carry for left-handed workflows

Occidental Leather 8060LH Key Features

• Left-handed layout — wear on right side
• 3-pouch design: main, outer, and upper bags
• Industrial nylon with leather reinforcements
• Dedicated holders for blade square, angle square, cat’s paw, driver bits
• 9 pockets & tool holders
• Lightweight, built for everyday comfort
• Made in the USA

Occidental Leather 8060LH Applications

• Framing: keep nails, layout tools, and fasteners at hand
• General carpentry: organized storage for common hand tools
• Layout work: carry blade square, angle square, and marking tools
• Remodeling: lightweight pouch for fastener management

Occidental Leather 8060LH Installation Overview

1. Thread your work belt through the leather tunnel on the pouch.
2. Position the fastener bag on the right side for left-handed setups.
3. Secure the pouch and verify comfortable reach to pockets and holders.
4. Load fasteners and layout tools into the designated pockets.

Occidental Leather 9520LH Key Features

• Compact, lightweight fastener bag for trim, framing & finish work
• Innovative round-bottom nylon main and outer bags maintain shape
• Patented 2-in-1 outer bag maximizes fastener capacity in a small footprint
• Speed square holder usable inside or outside
• Left-handed layout — wear on right side; includes Oxy Tool Shield
• Made in the USA

Occidental Leather 9520LH Applications

• Trim carpentry fastener organization
• Framing tasks needing quick access to nails, bits, and tools
• Finish work with dedicated storage for a speed square and small tools

Occidental Leather 9520LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Wear on the right side for left-handed setups.
3. Attach the Oxy Tool Shield to the bag or pocket as preferred.
4. Load tools and fasteners into designated pockets and holders.

Occidental Leather 5062LH Key Features

• 4-pouch stacked layout for expanded capacity
• 10 pockets & tool holders for fasteners and layout gear
• Left-handed orientation — worn on the right side
• Tool-specific slots for blade square, driver bits, cat’s paw, and angle square
• Full-grain leather construction for long-term durability
• Made in the USA

Occidental Leather 5062LH Applications

• Framing: Carry nails, cat’s paw, and layout squares
• General carpentry: Organize driver bits, nail sets, and fasteners
• Layout work: Store 1" blade square and angle square
• Jobsite setup: High-capacity pouch for daily tool access

Occidental Leather 5062LH Installation Overview

1. Select right side of body for left-handed orientation.
2. Slide the pouch onto a compatible work belt.
3. Secure positioning and balance with other bags.
4. Load fasteners and tools into dedicated pockets.
5. Verify comfortable access before use.

Occidental Leather 5060LH Features

• Left-handed fastener bag designed to be worn on the right side
• Three-pouch layout with top-access tier for efficient fastener storage
• Holders for 1" blade square, angle square, cat’s paw, driver bits & more
• Premium durable leather construction
• Made in the USA

Occidental Leather 5060LH Applications

• Framing — organized storage for nails and layout tools
• General carpentry — quick access to squares, bits, and fasteners

Occidental Leather 5060LH Installation Overview

1. Thread the bag onto a compatible work belt.
2. For left-handed users, position the fastener bag on the right side.
3. Load primary tools and fasteners into the three stacked pouches.
4. Place layout tools in the dedicated holders (square, bits, cat’s paw).
5. Check balance and adjust placement for comfortable access.

Key Features

• Popular OxyLights fastener bag for framing and general carpentry
• Left-handed layout — worn on the right side for right-hand access
• Holders for 1" blade square, angle square, cat’s paw, and driver bits
• 4 stacked compartments with 10 total pockets/tool holders
• Made in the USA

Applications

• Framing tasks requiring organized fasteners and layout tools
• General carpentry and remodeling
• Left-handed setups needing right-side wear
• Keeping driver bits, squares, and pry tools readily accessible

Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for left-handed use.
3. Load fasteners and tools into the designated pockets and holders.
4. Confirm the bag sits securely and allows clear tool access.

Occidental Leather B5060 Key Features

• Three-pouch fastener layout keeps hardware and small tools organized
• Holders for 1" blade square, angle square, cat’s paw, and driver bits
• Premium leather construction for long-term durability
• Highly recommended for framing and general carpentry
• Made in the USA

Occidental Leather B5060 Applications

• Framing: Carry nails, layout tools, and drivers within reach
• General Carpentry: Organized storage for fasteners and bits
• Belt-mounted storage for everyday jobsite tasks

Occidental Leather B5060 Installation Overview

1. Thread the bag onto a compatible work belt through the back slot.
2. Position on the side opposite your primary tool bag for balance.
3. Load fasteners and layout tools into the designated pouches and holders.
4. Adjust belt fit and verify clear access to tools before work.