Occidental Leather
Occidental Leather 5062LH Left Handed 4 Pouch Pro Fastener Bag
Occidental Leather 5062LH Description
The 5062LH Left Handed 4 Pouch Pro Fastener Bag delivers high-capacity organization in a compact, all-leather design. It builds on the 3-pouch layout with an added outer pouch and dedicated slots for layout tools and bits. Worn on the right side for left-handed users, it keeps fasteners and frequently used tools within easy reach. Made in the USA.
Occidental Leather 5062LH Includes
- (1) 5062LH Left Handed 4 Pouch Pro Fastener Bag
Occidental Leather 5062LH Key Features
- Left-handed layout worn on the right side
- Same features as 5060LH plus an additional outer pouch
- Holders for blade square, angle square, driver bits, and cat's paw
- 10 total pockets and tool holders
- Full-grain leather construction for durability
- Made in the USA
Occidental Leather 5062LH Applications
- Framing and rough carpentry fastener carry
- General carpentry tool and hardware organization
- Layout tasks requiring blade and angle squares
- Daily jobsite use where quick access to bits and small tools is needed
Occidental Leather 5062LH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the right side of the body for left-handed use.
- Load fasteners and tools into the four stacked compartments.
- Use dedicated holders for squares, bits, and cat's paw.
- Adjust placement for comfort and balanced carry.
Occidental Leather 5062LH Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 in x 8 in |
| Middle Bag | 7 in x 6 in |
| Outer Bag | 5.5 in x 5.5 in |
| Upper Bag | 4.5 in x 4.5 in |
| Material | Full-grain leather |
| Weight | 2.1 lb |
| Hand Orientation | Left handed; worn on right side |
| Country of Origin | USA |
Occidental Leather 5062LH Left Handed 4 Pouch Pro Fastener Bag
Left-handed 4 pouch leather fastener bag
✓ Left-handed layout worn on right side
✓ 4 stacked pouches for high-capacity storage
✓ 10 pockets and holders for tools and fasteners
✓ Full-grain leather construction
✓ Made in USA
Leather Gear Care
- Brush off jobsite grit daily; wipe with a damp cloth when dirty.
- Shake out debris from inside compartments periodically.
- For deeper cleaning, use mild soap and water only; let air dry.
- About once a year, clean with saddle soap or mild cleaner, then apply a small amount of non-oil-based leather conditioner.
- Store dry and out of direct sunlight. Avoid oil-based products that can weaken stitching.
- Wipe off mud, concrete, or drying compounds with a damp cloth before they harden.
- 4 Pouch Layout - Expanded capacity in a compact footprint
- 10 Pockets and Holders - Organizes fasteners, squares, bits, and more
- Full-Grain Leather - Durable, long-lasting construction
- Left-Handed Orientation - Wear on the right side of the body
- Dimensions: Main 9 in x 8 in; Middle 7 in x 6 in; Outer 5.5 in x 5.5 in; Upper 4.5 in x 4.5 in
- Weight: 2.1 lb
- Made in the USA
5 low in stock
Pay with
Top Sellers
Our Highest Quality Products
Newest Arrivals
Newest Arrivals to Tool Belt Outlet
Product Information
More About Occidental Leather 5062LH Left Handed 4 Pouch Pro Fastener Bag
Occidental Leather 5062LH Description
The 5062LH Left Handed 4 Pouch Pro Fastener Bag delivers high-capacity organization in a compact, all-leather design. It builds on the 3-pouch layout with an added outer pouch and dedicated slots for layout tools and bits. Worn on the right side for left-handed users, it keeps fasteners and frequently used tools within easy reach. Made in the USA.
Occidental Leather 5062LH Includes
- (1) 5062LH Left Handed 4 Pouch Pro Fastener Bag
Occidental Leather 5062LH Key Features
- Left-handed layout worn on the right side
- Same features as 5060LH plus an additional outer pouch
- Holders for blade square, angle square, driver bits, and cat's paw
- 10 total pockets and tool holders
- Full-grain leather construction for durability
- Made in the USA
Occidental Leather 5062LH Applications
- Framing and rough carpentry fastener carry
- General carpentry tool and hardware organization
- Layout tasks requiring blade and angle squares
- Daily jobsite use where quick access to bits and small tools is needed
Occidental Leather 5062LH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the right side of the body for left-handed use.
- Load fasteners and tools into the four stacked compartments.
- Use dedicated holders for squares, bits, and cat's paw.
- Adjust placement for comfort and balanced carry.
Occidental Leather 5062LH Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 in x 8 in |
| Middle Bag | 7 in x 6 in |
| Outer Bag | 5.5 in x 5.5 in |
| Upper Bag | 4.5 in x 4.5 in |
| Material | Full-grain leather |
| Weight | 2.1 lb |
| Hand Orientation | Left handed; worn on right side |
| Country of Origin | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
