Sort by:
Occidental Leather B5080DB XXL Description
Built for professional framers, this Pro Framer tool belt set is crafted from premium top grain leather with hand specific tool layout, copper rivet reinforcements, and the NoSpill tool holder system for secure, efficient access. Designed for heavy outdoor use.
Occidental Leather B5080DB XXL Includes
- (1) HD 3 inch Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with tape holder
Occidental Leather B5080DB XXL Key Features
- Premium top grain leather construction
- NoSpill tool holder system keeps tools secure
- Hand specific tool holder placement for workflow
- Copper rivets reinforce main bags
- Built in tape holster, fits tapes up to 30 ft
- Made in USA
Occidental Leather B5080DB XXL Applications
- Framing and general carpentry
- Jobsite tool and fastener organization
- Efficient workflow for right or left handed setups
- Daily use in outdoor construction environments
Occidental Leather B5080DB XXL Installation Overview
- Measure your current tool belt from buckle end to used hole to confirm size.
- Wear over typical work clothing and adjust to a comfortable midpoint hole.
- Place tool bag on dominant hand side and fastener bag opposite.
- Load tools and tapes into designated holders; confirm secure fit.
- Check rivets and seams periodically for wear and re-tighten belt as needed.
Occidental Leather B5080DB XXL Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | XXL |
| Weight | 5.3 lbs |
| Material | Leather |
| Color | Black, Tan |
| Built in Tape Holster | Up to 30 ft |
| Country of Origin | USA |
| Included Components | 5035 belt, 5060 fastener bag, 5018DB tool bag, 5012 hammer holder |
Occidental Leather B5135 SM Description
Handcrafted in the USA, the Stronghold Comfort Belt delivers day-long support with a wide 5 in leather body, moisture-wicking wool padding, and a 2 in all-leather overbelt that locks tool bags in place. Nickel-plated steel hardware and built-in suspender loops add durability and load-carrying comfort.
Occidental Leather B5135 SM Includes
- (1) Stronghold Comfort Tool Belt, Size Small, Black
Occidental Leather B5135 SM Key Features
- 5 in wide belt for enhanced back support
- Padded wool liner for moisture-wicking comfort
- 2 in all-leather overbelt helps prevent bag sliding
- Nickel-plated steel buckles and hardware
- Integrated suspender attachment loops
- Edge-stitched Latigo leather for strength and clean finish
- Handcrafted in the USA
Occidental Leather B5135 SM Applications
- Securely carry and stabilize tool bags and pouches
- Back support for all-day wear on construction sites
- Use with suspenders for balanced load distribution
- General carpentry, framing, remodeling, and trades work
Occidental Leather B5135 SM Installation Overview
- Measure your existing tool belt from buckle end to the hole you use to confirm size.
- Position the Stronghold belt where you wear your rig and buckle to the midpoint hole.
- Slide tool bags onto the 2 in overbelt and secure in desired positions.
- Attach compatible suspenders to the built-in loops if needed.
- Fine-tune fit for comfort and even weight distribution.
Occidental Leather B5135 SM Specifications
| Size | Small (midpoint 34 in) |
| Color | Black |
| Width | 5 in |
| Overbelt | 2 in all-leather overbelt |
| Liner | Padded wool, moisture wicking |
| Material | 12-14 oz Latigo leather |
| Hardware | Nickel-plated steel buckles and loops |
| Country of Manufacture | USA |
| Approx. Weight | 2.1 lb |
Occidental Leather 5135 SM Stronghold Belt System Description
Handcrafted 5 inch leather work belt built for all day support and comfort. Made from 12-14 oz Oxy Red Latigo leather with a padded wool liner, a 2 inch all leather overbelt to keep tool bags in place, nickel plated steel buckles, suspender loops, and edge stitching for strength. Made in the USA.
Includes
- (1) Tool Belt
Key Features
- 5 inch wide belt for added back support
- Padded wool liner for moisture wicking comfort
- 2 inch leather overbelt keeps bags from sliding
- Nickel plated steel buckles and built in suspender loops
- Edge stitched leather for durability
- Made in USA
Applications
- Comfortable support for heavy tool rigs
- Securing clip on tool bags and pouches
- Use with suspenders for balanced load carry
- General construction and carpentry work
Installation Overview
- Measure your existing tool belt from buckle end to the used hole to confirm size.
- Place the belt where you wear your rig over normal work clothing.
- Buckle using the midpoint hole for best adjustment range.
- Attach tool bags to the overbelt and secure through belt loops.
- Clip suspenders to the attachment loops if used.
Specifications
| Size | Small |
| Belt Width | 5 in |
| Overbelt Width | 2 in |
| Material | Leather with padded wool liner |
| Hardware | Nickel plated steel |
| Color | Brown, Tan |
| Weight | 5.4 lb |
| Country of Manufacture | USA |
Occidental Leather 5135 M Description
Handcrafted 5 in work belt built for support and comfort. Made from 12-14 oz OX Red Latigo leather with a moisture wicking wool liner. Features a 2 in all leather overbelt, nickel plated buckles, suspender loops, and edge stitching to hold tool bags in place and provide long lasting durability. Made in USA.
Occidental Leather 5135 M Includes
- (1) 5135 M Stronghold Comfort Belt
Occidental Leather 5135 M Key Features
- Wide 5 in belt for enhanced back support
- Built in suspender attachment loops
- Thick padded wool liner for comfort and moisture control
- Heavy duty buckles and belt loops reduce bag sliding
- Edge stitched leather for added strength
- Made in USA
Occidental Leather 5135 M Applications
- Securely carry tool bags and pouches on the job
- Provide back support during long workdays
- Use with suspenders for balanced load distribution
- Suitable for carpentry, framing, and general trades
- Comfortable wear in warm or active conditions
Occidental Leather 5135 M Installation Overview
- Measure an existing tool belt from buckle end to the most used hole to find belt size.
- Select Medium if your measurement is near 37 in midpoint.
- Wear over standard work clothing and tighten using the preferred hole.
- Attach tool bags to the overbelt and loops; add suspenders if needed.
- Confirm comfortable fit and adjust within the available holes.
Occidental Leather 5135 M Specifications
| Size | Medium |
| Belt Width | 5 in |
| Overbelt Width | 2 in |
| Material | 12-14 oz OX Red Latigo Leather |
| Liner | Padded wool |
| Hardware | Nickel plated steel |
| Color | OxyRed, Brown Tan |
| Weight | 5.4 lbs |
| Country of Manufacture | USA |
NOTE: Measure your belt, not your pant waist, to select the correct size.
Occidental Leather 5135 XL Description
Handcrafted in the USA from 12-14 oz OX Red Latigo leather with sweat wicking wool for all day comfort and support. The Stronghold Belt System features a wide 5 in belt for added back support, a 2 in all leather overbelt, and nickel plated steel buckles with belt loops that help keep tool bags from sliding. Edge stitched for strength and durability.
Occidental Leather 5135 XL Includes
- (1) Tool Belt
Occidental Leather 5135 XL Key Features
- Wide 5 in belt enhances back support
- Suspender attachment loops pre-installed
- Thick padded interior for comfort and moisture control
- Heavy duty buckles and belt loops minimize bag sliding
- Edge stitched leather construction
- Made in USA
Occidental Leather 5135 XL Applications
- Supporting tool bags for carpentry and construction
- Improving lower back support during long work days
- Use with suspenders for added load distribution
- Jobsite wear requiring durable leather work belts
Occidental Leather 5135 XL Installation Overview
- Measure an existing tool belt from buckle end to the most used hole.
- Select the size closest to that mid-range measurement.
- Put the belt on over normal work clothes and adjust to comfort.
- Attach suspenders to the built-in loops if desired.
- Secure tool bags to the overbelt and verify they do not slide.
Occidental Leather 5135 XL Specifications
| Size | XL |
| Belt Width | 5 in |
| Overbelt Width | 2 in |
| Material | Leather |
| Color | Brown, Tan |
| Weight | 5.4 lbs |
| UPC | 759244328004 |
| Country of Manufacture | USA |
Occidental Leather 8018DBLH Description
Left handed OxyLights 3 pouch tool bag designed for the left side carry. Organizes everyday tools with dedicated holders for pencils, knife, crayon, chisel, torpedo level, hammer, and a tape holster compatible with tapes up to 35 ft.
Occidental Leather 8018DBLH Includes
- (1) 8018DBLH OxyLights 3 Pouch Tool Bag
Occidental Leather 8018DBLH Features
- Left handed layout for wear on the left side
- Holders for pencils, utility knife, crayon, chisel, torpedo level, and hammer
- Tape holster fits up to a 35 ft FatMax
- Compact 3 pouch configuration with organized storage
- Lightweight OxyLights construction
Occidental Leather 8018DBLH Applications
- Daily tool organization for carpentry and framing tasks
- Measuring and layout work with quick tape access
- Punch list and trim installs requiring compact storage
Occidental Leather 8018DBLH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for left handed access.
- Load tools into dedicated holders for secure carry.
Occidental Leather 8018DBLH Specifications
| Pockets and Tool Holders | 10 |
| Main Tool Bag | 9 x 8 in |
| Outer Bag | 5 x 5.5 in |
| Weight | 1.3 lb |
| Hand | Left |
| Series | OxyLights |
| Pouch Count | 3 |
Occidental Leather B5060 Description
The Black Pro Fastener Bag delivers organized storage in a three pouch layout with holders for a 1 inch blade square, angle square, cats paw loop, and driver bits. Built from premium leather, it is a favorite for framing and general carpentry.
Occidental Leather B5060 Includes
- (1) Black Pro Fastener Bag
Occidental Leather B5060 Features
- Three pouch stacked layout for fastener organization
- Dedicated holders for 1 inch blade square, angle square, cats paw loop, and driver bits
- Premium leather construction for long term durability
- Recommended for framing and general carpentry
- Left hand option available as 5060LH
Occidental Leather B5060 Applications
- Framing tasks requiring quick access to nails and layout tools
- General carpentry fastener and tool organization
- Jobsite setup where squares, bits, and pry tools need dedicated storage
Occidental Leather B5060 Installation Overview
- Thread the bag onto a compatible work belt.
- Choose side based on hand preference and workflow.
- Load fasteners into main and outer pouches.
- Place layout tools and bits into the dedicated holders.
- Check balance and adjust position on belt for comfort.
Occidental Leather B5060 Specifications
| Pockets and Tool Holders | 9 |
| Weight | 2.1 lbs |
| Main Bag | 9 x 8 in |
| Outer Bag | 7 x 6 in |
| Upper Bag | 4.5 x 4.5 in |
| Left Hand Option | 5060LH |
| Material | Leather |
| Made in | USA |
Occidental Leather 9850LH Black Left Handed Adjust-to-Fit FatLip Tool Belt Set
Occidental Leather 9850LH Black Left Handed Adjust-to-Fit FatLip Tool Belt Set
Occidental Leather 9850LH Description
Left-handed Adjust-to-Fit FatLip tool belt set built for production carpenters. Main bags are 10 inches deep with leather-reinforced corners and bottoms. Belt section uses high density neoprene, rugged commercial nylon, and leather components, with D-rings for suspenders and hand-specific tool holders to optimize work rhythm.
Occidental Leather 9850LH Includes
- (1) Belt Assembly
- (1) Hammer Holder
Occidental Leather 9850LH Features
- Adjust-to-Fit belt allows seasonal clothing changes
- D-rings pre-installed for use with suspension systems
- Hand-specific tool holders for efficient workflow
- FatLip bag design with leather-reinforced corners and bottoms
- Left-handed layout (also available as 9850 for right-handed)
Occidental Leather 9850LH Applications
- Framing and general carpentry
- Production carpentry setups
- Jobsite tool organization and fastener storage
- Use with suspenders for heavy-load days
Occidental Leather 9850LH Installation Overview
- Measure pant waist and set belt to the appropriate Adjust-to-Fit range.
- Position left- and right-side bags for preferred reach.
- Secure hammer holder and tool shield to belt as needed.
- Load tools and fasteners; verify balance and comfort.
- Attach suspenders to pre-installed D-rings if desired.
Occidental Leather 9850LH Specifications
| Handedness | Left |
| Pockets and Tool Holders | 24 |
| Main Bag Depth | 10 in |
| Belt Adjustment Range | Pant waist 32 to 41 in |
| Color | Black |
| Materials | High density neoprene, rugged nylon, leather |
| Weight | 5.2 lb |
| UPC | 759244249200 |
| Country of Origin | USA |
Occidental Leather B5135 M Description
Handcrafted in the USA, the Stronghold Comfort Belt pairs 12-14 oz black Latigo leather with sweat wicking wool and thick padding to boost back support and comfort all day. A 2 in. leather overbelt and heavy duty buckles with belt loops keep tool bags secure, while integrated suspender loops add carry options.
Occidental Leather B5135 M Includes
- (1) Tool Belt
Occidental Leather B5135 M Key Features
- Wide 5 in. belt for added lower back support
- Suspender attachment loops
- Thick padded interior for comfort and moisture wicking
- 2 in. leather overbelt plus heavy duty buckles and belt loops minimize bag sliding
- Handcrafted in the USA from premium Latigo leather
Occidental Leather B5135 M Applications
- Support and stabilize tool bags and pouches on the job
- Use with suspenders for added load distribution
- Daily wear for construction, carpentry, electrical, and trades
- Upgrading comfort on existing Occidental Leather systems
Occidental Leather B5135 M Installation Overview
- Measure an existing work belt or measure from buckle to the hole you use to confirm size.
- Thread tool bags onto the 2 in. overbelt as desired.
- Position the belt at working height and buckle to a comfortable hole.
- Attach suspenders to the loops if used and adjust for balance.
- Reposition bags so weight is centered and movement is minimized.
Occidental Leather B5135 M Specifications
| Belt Size | Medium, 37 in. |
| Color | Black |
| Material | 12-14 oz Black Latigo Leather with sweat wicking wool |
| Belt Width | 5 in. |
| Overbelt Width | 2 in. |
| Connection | Buckle |
| Weight | 2.25 lb |
| Country of Origin | USA |
| UPC | 759244333909 |
Occidental Leather 8089 SM Description
Leather and industrial nylon combined to reduce weight while maintaining durability. OxyRed leather reinforces stress points and provides secure NoSpill leather tool holders. This OxyLights framer setup offers 22 pockets and tool holders in a lighter weight alternative. Made in USA.
Occidental Leather 8089 SM Includes
- (1) OxyLights 7 Bag Framer Set
- (1) HD 3 inch Ranger Leather Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag
Occidental Leather 8089 SM Key Features
- Hand specific tool holder layout
- Padded two ply bags keep their shape
- Industrial nylon is highly abrasion resistant
- Leather tool holders and corner reinforcement
- Made in USA
Occidental Leather 8089 SM Applications
- Framing and general carpentry
- Organizing fasteners and small tools
- Efficient hand specific tool access
- Jobsite carry for hammers, squares, and pliers
Occidental Leather 8089 SM Installation Overview
- Measure and select the correct belt size and position on waist.
- Attach tool and fastener bags to the belt in preferred left or right layout.
- Secure the hammer holder and any clip on accessories.
- Load tools and fasteners into designated pockets.
- Adjust belt fit for comfort and check all rivets and straps.
Occidental Leather 8089 SM Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | Small |
| Weight | 4.1 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Made in | USA |
| Components | 8018DB Tool Bag, 8062 Fastener Bag, 5012 Hammer Holder, 5035 HD 3 inch Ranger Work Belt |
Occidental Leather B5135 XXL Description
Handcrafted in the USA from 12-14 oz Black Latigo leather with a padded wool liner for moisture wicking comfort. This premium 5 inch work belt features a 2 inch all leather overbelt and belt loops to keep tool bags secure, nickel plated steel buckles, built in suspender attachment loops, and edge stitching for strength and a clean finish.
Occidental Leather B5135 XXL Includes
- (1) Tool Belt
Occidental Leather B5135 XXL Key Features
- 5 inch wide belt for enhanced back support
- Padded wool liner for comfort and moisture control
- 2 inch all leather overbelt keeps tool bags in place
- Nickel plated steel buckles and hardware
- Built in suspender attachment loops
- Edge stitched for durability and clean appearance
- Made in the USA
Occidental Leather B5135 XXL Applications
- Daily tool carry with improved back support
- Securing Occidental tool bags with minimal sliding
- Use with suspenders for balanced load distribution
- Carpentry, framing, and general construction work
- Comfort focused belt upgrade for heavy rigs
Occidental Leather B5135 XXL Installation Overview
- Put the belt on over typical work clothing and note the hole used.
- Remove and measure from the end of the buckle to the used hole.
- Select the size closest to that measurement; this model is XX Large.
- Attach tool bags to the overbelt loops; tighten to minimize sliding.
- Connect compatible suspenders to the attachment loops if desired.
Occidental Leather B5135 XXL Specifications
| Belt Size | XXL |
| Width | 5 inches |
| Overbelt Width | 2 inches |
| Color | Black |
| Material | 12-14 oz Black Latigo leather |
| Liner | Padded wool |
| Hardware | Nickel plated steel |
| Country of Manufacture | USA |
Occidental Leather 8585LH XL Description
Built for production carpenters, the Heritage FatLip left-handed setup pairs 10 inch deep bags with a full leather boot and the signature FatLip leather mouth that stays open and resists abrasion. Padded two ply construction wrapped in industrial nylon keeps shape and durability while the HD 3 inch Ranger belt delivers stable carry.
Occidental Leather 8585LH XL Includes
- (1) 8585LH XL Heritage FatLip Tool Bag Set
- (1) 8584 FatLip Tool Bag
- (1) 5035 HD 3 inch Ranger Work Belt
- (1) 5020 2-in-1 Tool and Hammer Holder
- (1) 8583 FatLip Fastener Bag
Occidental Leather 8585LH XL Features
- FatLip leather mouth holds shape and resists wear
- Full leather boot base with rugged nylon exterior
- Hand specific tool layout for left handed users
- Padded two ply bags maintain structure loaded or empty
- 3 inch HD Ranger belt with center back 2-in-1 holder
- 25 pockets and tool holders
- Made in USA
Occidental Leather 8585LH XL Applications
- Framing and production carpentry tool organization
- Jobsite carry for fasteners, hand tools, and layout gear
- Left handed workflow with hand specific pouch placement
- General construction where durable tool storage is needed
Occidental Leather 8585LH XL Installation Overview
- Measure to select proper belt size and fit at mid hole.
- Attach tool and fastener bags to the belt in left hand layout.
- Secure the 2-in-1 holder at center back and tighten belt.
- Load tools and fasteners; verify balance and access.
- Inspect stitching and hardware before use.
Occidental Leather 8585LH XL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XL |
| Weight | 5.2 lbs |
| Material | Leather and Nylon |
| Bag Depth | 10 inches |
| Belt Width | 3 inches |
| Color | Green, Tan |
| Handedness | Left |
| Made In | USA |
Occidental Leather 8087 SM OxyLights Driver Set Description
A lightweight yet jobsite tough driver tool belt setup for metal framing, finish carpentry and remodeling. The set combines abrasion resistant industrial nylon with leather reinforcements to reduce weight while maintaining durability. Right side bag 8068 features a holster for impact or screw guns and holders for commonly used tools; left side bag B8064 provides multi pouch storage for fasteners and layout tools. Made in the USA.
Includes
- (1) OxyLights Driver Tool Belt Set
- (1) HD 3 in Ranger Leather Work Belt
- (1) OxyLights Fastener Bag with Double Outer Bag
- (1) 2 in 1 Tool and Hammer Holder
- (1) Impact or Screw Gun and Drill Bag
Key Features
- 20 pockets and tool holders
- Hand specific tool organization
- Padded two ply bags hold their shape under load
- Industrial nylon with leather tool holders and corner reinforcement
- Right side gun holster for impact or screw guns
- Made in USA
Applications
- Metal stud framing and fastening
- Finish carpentry and trim installation
- Remodeling and punch list tasks
- General layout and fastening work
Installation Overview
- Measure and select the correct belt size for over garment wear.
- Thread the work belt through the bags and holders in preferred positions.
- Secure the hammer holder and accessories to the belt.
- Adjust the belt for a snug, balanced fit at the midpoint hole.
- Load tools and fasteners; verify balanced weight and accessibility.
Specifications
| Pockets and Holders | 20 |
| Belt Size | Small |
| Weight | 4.1 lbs |
| Materials | Leather, Nylon |
| Color | Black, Tan |
| Right Bag | 8068 Impact or Screw Gun and Drill Bag |
| Left Bag | B8064 OxyLights Fastener Bag with Double Outer Bag |
| Belt | 5035 HD 3 in Ranger Leather Work Belt |
| Holder | 5020 2 in 1 Tool and Hammer Holder |
| Origin | USA |
Occidental Leather 5080DBLHSM Small Left Handed Pro Framer Set with Double Outer Bag
$365.90
Unit price perOccidental Leather 5080DBLHSM Small Left Handed Pro Framer Set with Double Outer Bag
$365.90
Unit price perOccidental Leather 5080DBLH SM Description
Classic Pro Framer leather tool belt set updated with two medium outer pouches for added storage. Built from premium top grain leather with copper-riveted stress points, hand-specific holders for a left-handed layout, and the NoSpill system. Made in USA.
Occidental Leather 5080DBLH SM Includes
- (1) 5080DBLH SM Pro Framer Tool Belt Set
- (1) 5035 HD 3" Ranger Work Belt
- (1) 5060 3 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather 5080DBLH SM Features
- 21 pockets and tool holders
- Premium top-grain leather construction
- 12-oz belting leather with steel roller buckle
- Copper-riveted stress points
- NoSpill tool holder system
- Left-handed, hand-specific layout
- Built-in tape holster for tapes up to 30 ft
- Made in USA
Occidental Leather 5080DBLH SM Applications
- Framing and general carpentry tool organization
- Jobsite carry of fasteners, hand tools, and layout gear
- Left-handed workflows needing hand-specific placement
- Daily professional use in outdoor conditions
Occidental Leather 5080DBLH SM Installation Overview
- Measure your current tool belt per size guide; select Small.
- Thread the 5035 belt through tool and fastener bags.
- For left-handed use: place tool bag on left, fastener bag on right.
- Attach hammer holder and adjust buckle for secure fit.
- Load tools and verify NoSpill holders keep items secure.
Occidental Leather 5080DBLH SM Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | Small |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Handedness | Left-handed |
| Belt | HD 3" Ranger Work Belt |
| Tape Holster | Built-in, up to 30 ft |
Occidental Leather 5530 SM Stronghold Big Oxy Set
Premium leather tool belt setup built for maximum capacity and organization. Features round-bottom full-capacity bags, a 3 in heavy-duty English bridle leather work belt with steel roller buckle, and a hand-specific NoSpill layout. Includes the Oxy Tool Shield and 2-in-1 Tool and Hammer Holder. Made in the USA.
Includes
- (1) Stronghold Big Oxy Set 5530 SM
- (1) 5035 HD 3 in Ranger Work Belt
- (1) 5525 Big Oxy Fastener Bag
- (1) 5526 Big Oxy Tool Bag
- (1) 5020 2-in-1 Tool and Hammer Holder
- (1) 2003 Oxy Tool Shield
Key Features
- Round-bottom full-capacity leather bags for greater storage and durability
- NoSpill hand-specific tool holder layout
- Premium top-grain leather throughout
- 3 in heavy-duty English bridle leather belt with steel roller buckle
- 28 total pockets and tool holders
- Made in the USA
Applications
- Framing and layout work
- Trim and finish carpentry
- General carpentry and remodeling
- Jobsite tool organization and carry
- Daily professional contractor use
Installation Overview
- Measure for proper belt size per manufacturer sizing guide.
- Adjust the 3 in belt to a comfortable, secure fit.
- Position tool and fastener bags on preferred sides.
- Attach the 2-in-1 holder and Oxy Tool Shield to desired locations.
- Load tools evenly to balance weight and check all rivets and clips are secure.
Specifications
| Pockets and Holders | 28 |
| Weight | 6.3 lbs |
| Material | Premium top-grain leather |
| Belt Width | 3 in |
| Belt Material | 12 oz English bridle leather with steel roller buckle |
| Components | 5035 Belt, 5525 Fastener Bag, 5526 Tool Bag, 5020 2-in-1 Holder, 2003 Oxy Tool Shield |
| Sizes | SM to XXXL |
| Country of Manufacture | USA |
| Color | Brown, Tan |
Occidental Leather B5018DB Black Pro Tool Bag Description
Right-hand, all-leather professional tool bag in black with double outer bags and a built-in tape holder for tapes up to 35 ft. Compact yet roomy, it organizes everyday tools like knives, pencils, chisels, torpedo level, and hammer while riding on the right side for quick access.
Occidental Leather B5018DB Includes
- (1) B5018DB Black Pro Tool Bag
Occidental Leather B5018DB Key Features
- Right-side layout for tools most accessed with the right hand
- Integrated tape holster fits up to 35 ft tape
- Double outer bags for added organization
- Durable all-leather construction with reinforced stitching
- Made in the USA
Occidental Leather B5018DB Applications
- Daily carry of carpentry and framing hand tools
- Finish and trim work tool organization
- General construction and remodeling
- Measuring and layout tasks on site
Occidental Leather B5018DB Installation Overview
- Slide the pouch onto your work belt.
- Position on the right side for dominant-hand access.
- Load tools into main and outer pockets; place tape in the holster.
- Adjust belt for comfort and secure fit before use.
Occidental Leather B5018DB Specifications
| Pockets and Tool Holders | 11 |
| Weight | 2.1 lbs |
| Main Tool Bag | 9 x 8 in |
| Outer Bags | 5 x 5.5 in |
| Material | Leather |
| Color | Black |
| Hand Orientation | Right side wear |
| Country of Manufacture | USA |
Occidental Leather 5080LH LG Description
Pro Leather Series left handed framer belt set built from premium top grain leather. Designed for modern builders with hand specific tool holders and 21 pockets for organized performance.
Occidental Leather 5080LH LG Includes
- (1) 5080LH LG Pro Framer Package - Left set
- (1) HD 3 inch Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 2 Pouch Pro Tool Bag with tape holder
Occidental Leather 5080LH LG Features
- 21 pockets and tool holders
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- Copper rivets reinforce main bags
- NoSpill tool holder system
- Hand specific layout promotes work rhythm
- Made in USA
Occidental Leather 5080LH LG Applications
- Framing and general carpentry
- Fastener and small tool organization on site
- Measuring and layout tasks
- Daily carry for hammers, tapes, and hand tools
Occidental Leather 5080LH LG Installation Overview
- Put the belt on over work clothes where you normally wear it.
- Note the hole used to fasten the belt.
- Measure from the buckle to that hole to determine belt size.
- Load tools into hand specific holders and adjust fit for comfort.
Occidental Leather 5080LH LG Specifications
| Pockets and Tool Holders | 21 |
| Belt Size | Large |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Orientation | Left |
Occidental Leather 5080LH XL Pro Framer Package Left Description
Premium top grain leather belt set for left handed builders. Features hand specific tool holders, NoSpill organization, and rugged 12 oz belting leather with a steel roller buckle. Constructed to meet the demands of heavy outdoor use. Made in USA.
Includes
- (1) HD 3 in Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 2 Pouch Pro Tool Bag with Tape Holder
Key Features
- 21 pockets & tool holders
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- Hand set copper rivets reinforce main bags
- NoSpill tool holder system
- Hand specific layout for maximum working rhythm
- Made in USA
Applications
- Framing and general carpentry
- Jobsite tool and fastener organization
- Left handed belt setups for daily production work
- Remodeling and rough in tasks
- Outdoor construction where durable leather is preferred
Installation Overview
- Measure an existing belt from buckle to the hole used to confirm size.
- Wear the belt over typical work clothing and select the most comfortable hole.
- Position fastener and tool bags for left handed use; slide onto belt.
- Secure the steel roller buckle and check that pouches sit level on hips.
- Load tools and adjust pouch spacing for balance and access.
Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | XL |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Country of Origin | USA |
Occidental Leather 5064 Description
The 5064 Beltless 3 Pouch Pro Tool Bag delivers streamlined, right-side tool access with dual outer bags for superior organization. Built of premium leather and designed to integrate with the Stronghold Beltless System, it provides 10 total pockets and holders in a compact, 1.8 lb setup made in the USA.
Occidental Leather 5064 Includes
- (1) 5064 Beltless 3 Pouch Pro Tool Bag
Occidental Leather 5064 Key Features
- Beltless design integrates with Stronghold Beltless System
- 3-pouch layout with dual outer bags for organization
- Right-side orientation for quick access to frequently used tools
- 10 pockets and holders for hand tools and layout gear
- Premium leather construction; made in the USA
Occidental Leather 5064 Applications
- Right-side carry for hammers, knives, chisels, and pencils
- Beltless setups using Stronghold hubs and suspenders
- Carpentry, framing, trim, and general construction tasks
Occidental Leather 5064 Installation Overview
- Attach the bag to your Stronghold Beltless System hubs or suspenders.
- Position on the right side for preferred access.
- Load tools into the main and dual outer pouches for balance.
- Confirm rings and connectors are fully seated before use.
Occidental Leather 5064 Specifications
| Pockets and Holders | 10 |
| Weight | 1.8 lbs |
| Main Bag | 9 in x 8 in |
| Outer Bag | 5 in x 5.5 in |
| Orientation | Right side |
| Material | Leather |
| Compatibility | Stronghold Beltless System |
| Country of Origin | USA |
Occidental Leather 8583LH Description
Left handed Heritage FatLip fastener bag with a 10 inch deep main compartment, full leather boot, and a leather reinforced FatLip mouth that stays open and resists abrasion. The patented 2 in 1 outer bag integrates an angle square holster, with added sleeves and loops for tri square, cats paw, and driver bits.
Occidental Leather 8583LH Includes
- (1) 8583LH Left Handed Heritage FatLip Fastener Bag
Occidental Leather 8583LH Features
- 10 inch deep main bag with full leather boot
- Leather FatLip mouth keeps bag formed, open, and abrasion resistant
- Patented 2 in 1 outer bag with built in angle square holster
- Tri square sleeve, cats paw loop, and external pouches for nail sets or driver bits
- Left handed layout worn on the right side
- Made in USA
Occidental Leather 8583LH Applications
- Framing and carpentry fastener organization
- Drywall installation tool and bit storage
- General construction fastener and small tool management
Occidental Leather 8583LH Installation Overview
- Slide the bag onto your work belt.
- Position on the right side for left handed use.
- Load fasteners and tools into designated pockets.
- Confirm the FatLip mouth and compartments are clear for access.
Occidental Leather 8583LH Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 10 in x 10 in |
| Outer Bag | 9 in x 6 in |
| Upper Bag | 5 in x 4.5 in |
| Material | Leather and Nylon Hybrid |
| Weight | Approx. 1.7 lb |
| Color | Hunter Green |
| Handedness | Left handed, wear on right side |
Occidental Leather 8585LH LG Description
The Heritage FatLip Tool Belt Set is engineered for production carpenters. Ten inch deep bags feature a full leather boot and the distinctive FatLip leather mouth that keeps the bag open and protected from abrasion. Hand specific holder layout and padded two ply construction maintain shape and accessibility.
Occidental Leather 8585LH LG Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH LG Key Features
- 25 pockets and tool holders
- Hand specific tool holder layout for left handed users
- Padded two ply bags hold shape
- Industrial nylon with leather reinforcements for abrasion resistance
- Full leather boot and FatLip leather mouth
- Made in USA
Occidental Leather 8585LH LG Applications
- Framing and general carpentry
- Production carpentry tool organization
- Fastener and small tool storage on the jobsite
- Left handed belt system setups
Occidental Leather 8585LH LG Installation Overview
- Measure an existing belt from buckle to the hole used to determine belt size.
- Wear the belt over normal work clothing and confirm fit.
- Attach tool bags and holders to the belt in a left handed layout.
- Distribute tools and fasteners and adjust for comfort and balance.
- Check all rivets and loops before use.
Occidental Leather 8585LH LG Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Large |
| Weight | 5.2 lbs |
| Materials | Leather, Nylon |
| Color | Green, Tan |
| Hand | Left |
| Bag Depth | 10 in |
NOTE: Measure the belt itself to select the correct size; pant waist size does not equal belt size.
Occidental Leather 8089LH XXL Description
A lightweight, left-handed framer belt system blending abrasion resistant industrial nylon with leather reinforcements for durability and reduced weight. Hand specific NoSpill tool holders and padded two ply bags keep tools organized and the bag shape stable.
Occidental Leather 8089LH XXL Includes
- (1) OxyLights 7 Bag Framer Set - Left
- (1) HD 3 in Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH XXL Key Features
- 22 pockets and tool holders
- Hand specific tool layout with NoSpill leather holders
- Padded two ply bags maintain shape
- Industrial nylon with leather reinforcements
- Made in USA
Occidental Leather 8089LH XXL Applications
- Framing and general carpentry tool carry
- Fastener and small part organization on the jobsite
- Left handed workflow optimization
- Daily professional construction use
Occidental Leather 8089LH XXL Installation Overview
- Size the belt to your work clothing and buckle at the midpoint hole.
- Attach tool and fastener bags in the left handed layout.
- Secure the hammer holder and any clip on accessories.
- Load tools and fasteners into designated pockets.
- Adjust fit for comfort and balance before use.
Occidental Leather 8089LH XXL Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | XX-Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Belt Width | 3 in |
| UPC | 759244229707 |
| Components | 8018DB Tool Bag, 8062 Fastener Bag, 5012 Hammer Holder, 5035 Ranger Work Belt |
| Handedness | Left |
Occidental Leather 8585 XXXL Description
The Heritage FatLip Tool Bag Set is built for production carpenters, featuring 10 inch deep bags with a full leather boot and a distinctive leather FatLip mouth that stays open and resists abrasion. Padded two-ply tool bags keep their shape, while hand-specific holders organize tools for efficient workflow.
Occidental Leather 8585 XXXL Includes
- (1) Heritage FatLip Fastener Bag
- (1) Heritage FatLip Tool Bag
- (1) HD 3 inch Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
Occidental Leather 8585 XXXL Key Features
- 25 pockets and tool holders for organized storage
- Hand-specific tool holder layout
- Padded two-ply bags maintain structure
- Industrial nylon for high abrasion resistance
- Leather tool holders with reinforced corners
- Full leather boot and FatLip bag mouth
- Made in USA
Occidental Leather 8585 XXXL Applications
- Production carpentry and framing
- General construction tool organization
- Remodeling and installation tasks
- Finish and trim carpentry
- Jobsite tool carry with quick access
Occidental Leather 8585 XXXL Installation Overview
- Measure from belt buckle to the hole you use to determine belt size.
- Wear over normal work clothes and select the best buckle hole.
- Attach tool and fastener bags to preferred sides.
- Secure the 2-in-1 holder at the rear for hammer or specialty tools.
- Load tools and adjust for comfort and balance.
Occidental Leather 8585 XXXL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XXXL |
| Belt Length | 53 in. |
| Weight | 5.2 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| UPC | 759244282801 |
Occidental Leather 8585 XXL Description
The Heritage FatLip Tool Bag Set delivers a production-grade framer system with deep 10 in bags, a full leather boot, and the signature FatLip mouth that stays open and resists abrasion. Built from premium leather and industrial nylon, this XXL set provides hand-specific organization and long-term durability.
Occidental Leather 8585 XXL Includes
- (1) Heritage FatLip Tool Bag Set 8585 XXL
- (1) Heritage FatLip Fastener Bag
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
Occidental Leather 8585 XXL Key Features
- 25 pockets and tool holders for organized storage
- Hand-specific layout increases efficiency
- Padded two-ply bags maintain shape under load
- Industrial-strength nylon with leather reinforcements
- Full leather boot and FatLip mouth for durability
- Made in USA
Occidental Leather 8585 XXL Applications
- Framing and production carpentry
- General construction and remodeling
- Jobsite tool and fastener organization
- Heavy-duty daily use in demanding environments
Occidental Leather 8585 XXL Installation Overview
- Measure an existing belt from buckle end to your most-used hole to confirm size.
- Wear the belt over typical work clothing and position pouches as preferred.
- Secure the buckle using the hole that provides a snug, comfortable fit.
- Attach the hammer holder and adjust bag spacing for reach and balance.
- Verify all pouches are seated and the set rides level before use.
Occidental Leather 8585 XXL Specifications
| Pockets and Holders | 25 |
| Belt Size | XXL |
| Belt Width | 3 in |
| Weight | 5.2 lb |
| Materials | Leather, Nylon |
| Color | Green, Tan |
| UPC | 759244282702 |
| Country of Origin | United States |
