Sort by:
Occidental Leather 8089LH M Description
The OxyLights 7 Bag Framer Set combines industrial nylon with top-grain leather to cut weight while staying durable. A hand-specific layout with NoSpill leather holders keeps essential framing tools secure and accessible. Left-handed configuration. Made in USA.
Occidental Leather 8089LH M Includes
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 8062 OxyLights 4 Pouch Fastener Bag
- (1) 5012 Hammer Holder
- (1) 8018DB OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH M Features
- 22 pockets and tool holders for high-capacity carry
- Hand-specific tool layout for efficient workflow
- Padded two ply bags hold their shape
- Abrasion resistant industrial nylon with leather reinforcements
- NoSpill leather holders and OxyRed reinforced stress points
- Made in USA
Occidental Leather 8089LH M Applications
- Framing and rough carpentry tool organization
- General construction and jobsite carry
- Layout, measuring, and fastening tasks
- Left-handed workflow setups
Occidental Leather 8089LH M Installation Overview
- Measure and select proper belt size; position over typical workwear.
- Attach tool and fastener bags to the belt in left-handed layout.
- Secure hammer holder and adjust pouch spacing for balance.
- Tighten belt to a comfortable fit; verify free access to tools.
- Load tools and perform a final comfort and security check.
Occidental Leather 8089LH M Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | Medium |
| Weight | 4.0 lb |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Orientation | Left-handed |
| Belt Width | 3 in |
| Series | OxyLights |
| Made In | USA |
Occidental Leather 8089LH LG Description
The OxyLights 7 Bag Framer Set combines abrasion resistant industrial nylon with leather to cut weight while maintaining durability. Hand specific, all leather NoSpill tool holders keep essential tools secure, mirroring the layout of the all leather 5089LH in a lighter build. Made in USA.
Occidental Leather 8089LH LG Includes
- (1) OxyLights 7 Bag Framer Set - Left, Large
- (1) HD 3 in. Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH LG Features
- 22 pockets and tool holders
- Hand specific NoSpill leather holders for secure access
- Padded two ply tool bags hold their shape
- Extremely abrasion resistant industrial nylon construction
- Leather tool holders with leather reinforced corners
- Made in USA
Occidental Leather 8089LH LG Applications
- Framing and rough carpentry
- General carpentry tool organization on the jobsite
- Left handed tool layout for efficient workflow
- Residential and light commercial construction
- Daily use by professional builders seeking lightweight durability
Occidental Leather 8089LH LG Installation Overview
- Measure and size the belt to your work clothing.
- Position the fastener and tool bags for a left handed layout.
- Secure the hammer holder and accessories on the belt.
- Load tools and fasteners; adjust pouch positions for balance.
- Check fit and tighten belt for a secure, comfortable carry.
Occidental Leather 8089LH LG Specifications
| Pockets and Holders | 22 |
| Belt Size | Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Configuration | Left handed |
| Made In | USA |
Occidental Leather 8080DBLH XXXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLH XXXL OxyLights Framer Set with Double Outer Bags - Left Handed
Occidental Leather 8080DBLH XXXL Description
Leather and industrial nylon combine to create a lightweight, durable OxyLights framer system with double outer bags. Hand-specific, all-leather holders help prevent spills, and main bag corners are reinforced with OxyRed leather for long-term performance. Left-handed layout.
Occidental Leather 8080DBLH XXXL Includes
- (1) HD 3" Ranger Work Belt
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
- (1) OxyLights 3 Pouch Fastener Bag
Occidental Leather 8080DBLH XXXL Key Features
- 20 pockets and tool holders
- Hand-specific tool holder layout for efficiency
- Padded two-ply nylon bags hold their shape
- Industrial nylon resists abrasion
- Leather tool holders with reinforced corners
- Made in USA
Occidental Leather 8080DBLH XXXL Applications
- Framing tasks requiring fast access to tools and fasteners
- General carpentry and jobsite setup
- Organized carry for hammers, tape, squares, and hand tools
- Left-handed workflows needing mirrored pouch placement
Occidental Leather 8080DBLH XXXL Installation Overview
- Measure your existing tool belt from buckle end to used hole to confirm XXXL sizing.
- Attach tool and fastener bags to the belt in left-handed orientation.
- Secure hammer holder at rear center; adjust position for reach.
- Load tools and fasteners; balance weight across both sides.
- Check fit and tighten belt for comfortable, secure carry.
Occidental Leather 8080DBLH XXXL Specifications
| Pockets & Tool Holders | 20 |
| Belt Size | XXXL |
| Weight | 3.8 lbs |
| Material | Leather |
| Color | Green, Tan |
| Handedness | Left handed |
| UPC | 759244228502 |
Occidental Leather 5089LH XL Seven Bag Framer - Left Handed
Built for framers needing maximum capacity, this Pro Leather setup delivers seven pouches and 23 total pockets and tool holders. Premium top grain leather with copper-riveted stress points and a NoSpill tool holder layout provides long-lasting durability and secure organization for left-handed users.
Includes
- (1) Seven Bag Framer Tool Belt Set (5089LH XL)
- (1) HD 3 in Ranger Work Belt
- (1) 4 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Key Features
- Left-handed configuration for optimal workflow
- Premium top-grain leather construction
- 12 oz belting leather with steel roller buckle
- Copper rivet reinforcement at main bags
- NoSpill tool holder system for secure storage
- 23 pockets and tool holders for high capacity
- Made in the USA
Applications
- Framing and rough carpentry tool organization
- Jobsite fastener carrying and access
- Daily professional construction use
- Left-handed builders needing a hand-specific layout
Installation Overview
- Measure and confirm XL belt sizing per your work clothing.
- Slide tool and fastener bags onto the belt in left-handed layout.
- Attach hammer holder at rear center position.
- Buckle belt and adjust for a secure, comfortable fit.
- Load tools and verify balanced weight distribution.
Specifications
| Pockets & Tool Holders | 23 |
| Belt Size | XL |
| Weight | 5.4 lbs |
| Material | Top-grain leather |
| Color | Brown, Tan |
| Hand Orientation | Left Handed |
| Country of Manufacture | USA |
Occidental Leather 5089LH SM Description
Seven Bag Framer - Left Handed, Small. Built in the Pro Leather Series from premium top grain leather with oils and waxes for demanding outdoor use. High capacity layout with NoSpill tool holders and copper rivet reinforcement for durability.
Occidental Leather 5089LH SM Includes
- (1) Seven Bag Framer Tool Belt Set
- (1) HD 3 in Ranger Work Belt
- (1) 4 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather 5089LH SM Features
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- NoSpill tool holder system
- Copper rivets reinforce main bags
- 23 pockets and tool holders
- Function engineered for modern framers
- Made in USA
Occidental Leather 5089LH SM Applications
- Framing: organize fasteners and core tools for efficient workflow
- General carpentry: carry hand tools, square, and measuring gear
- Jobsite setup: high capacity pouch system for daily tasks
- Left-handed layout: tool bag on left, fasteners on right
Occidental Leather 5089LH SM Installation Overview
- Measure your current tool belt from buckle end to the hole used to determine size.
- Place belt over typical work clothing and adjust to midpoint hole.
- Attach tool and fastener bags in the left-handed configuration.
- Load tools and fasteners into dedicated NoSpill holders.
- Verify comfort and balance; fine tune pouch positions.
Occidental Leather 5089LH SM Specifications
| Pockets and Tool Holders | 23 |
| Pouch Count | 7 |
| Belt Size | Small |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Hand Orientation | Left handed |
Occidental Leather 8089LH XL Description
The OxyLights 7 Bag Framer Set blends industrial nylon with leather to cut weight while maintaining durability. Hand-specific NoSpill leather holders and padded two-ply bags keep tools organized and the bag shape stable. Built to mirror the layout of the all-leather 5089LH with less bulk. Made in USA.
Occidental Leather 8089LH XL Includes
- (1) HD 3 in. Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH XL Features
- 22 pockets and tool holders
- Hand-specific tool layout with NoSpill leather holders
- Padded two-ply bags hold their shape
- Abrasion-resistant industrial nylon with leather reinforcement
- Left-handed setup; Made in USA
Occidental Leather 8089LH XL Applications
- Framing and rough carpentry tool organization
- Jobsite fastener and hand tool carry
- Left-handed tool belt setup for carpenters
- General construction and remodeling
Occidental Leather 8089LH XL Installation Overview
- Size the HD Ranger belt to your work clothing and secure the buckle.
- Position fastener and tool bags on preferred sides for left-hand layout.
- Attach the hammer holder at center rear.
- Load tools and fasteners into hand-specific pockets.
- Check balance and tighten belt for a secure, comfortable fit.
Occidental Leather 8089LH XL Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | X-Large |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Configuration | Left-handed |
Occidental Leather 8585LH XXXL Description
The Heritage FatLip Tool Bag Set - Left is built for production carpenters. Ten inch deep bags feature a full leather boot with a distinctive leather FatLip bag mouth to keep the opening formed, open, and protected from abrasion. Hand specific holders and padded two ply construction deliver long lasting shape and comfort.
Occidental Leather 8585LH XXXL Includes
- (1) 8585LH XXXL Heritage FatLip Tool Bag Set - Left
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH XXXL Features
- 25 pockets and tool holders
- Left hand specific tool holder layout
- Padded two ply bags maintain shape
- Industrial nylon highly resistant to abrasion
- Leather tool holders with corner reinforcement
- Made in USA
Occidental Leather 8585LH XXXL Applications
- Framing and rough carpentry tool organization
- Finish carpentry and trim installation
- General construction and remodeling tasks
- Jobsite layout and measuring tools carry
- Fastener and small parts management
Occidental Leather 8585LH XXXL Installation Overview
- Measure an existing belt or use a tape to determine belt size; wear over typical work clothing.
- Measure from buckle to the hole you use to confirm XXXL belt size.
- Slide tool bags and holders onto the belt in a left handed layout.
- Adjust spacing for comfort; secure holders and attach hammer/tool shield.
- Load tools and fasteners; check balance and tighten belt.
Occidental Leather 8585LH XXXL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XXXL |
| Weight | 5.2 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Orientation | Left |
| Belt Length | 53 in |
| Belt Holes | 9 |
Occidental Leather 8080DB XL OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB XL OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB XL Description
Leather and industrial nylon are combined to reduce weight while maintaining durability. OxyRed leather reinforces high-wear corners and the all-leather NoSpill tool holders keep tools secure. A popular framer setup in a lighter OxyLights alternative.
Occidental Leather 8080DB XL Includes
- (1) OxyLights 3 Pouch Tool Bag
- (1) OxyLights 3 Pouch Fastener Bag
- (1) Hammer Holder
- (1) HD 3 in Ranger Work Belt
Occidental Leather 8080DB XL Key Features
- 21 pockets and tool holders
- Hand-specific holder layout for efficient access
- Padded two-ply bags hold shape under load
- Industrial nylon exterior resists abrasion
- Leather tool holders and reinforced corners
- Made in USA
Occidental Leather 8080DB XL Applications
- Framing and general carpentry tool organization
- Jobsite fastener and small parts storage
- Daily wear belt for professional builders
- Hands-free access to hammers, tape, and layout tools
Occidental Leather 8080DB XL Installation Overview
- Measure belt size from buckle to the hole you use; select XL.
- Thread the HD Ranger Work Belt through pouches and holders.
- Position tool and fastener bags for hand preference.
- Attach hammer holder and load tools evenly.
- Secure the belt; adjust for comfort and balance.
Occidental Leather 8080DB XL Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | XL |
| Weight | 3.8 lbs |
| Material | Leather |
Occidental Leather 8080DB M OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB M OxyLights Framer Set with Double Outer Bags
Occidental Leather 8080DB M Description
Leather and industrial nylon intelligently combined to lighten the builders load. OxyRed leather reinforces main bag corners and provides the NoSpill system of all leather tool holders. A popular framer setup in a lighter weight alternative with double outer bags.
Occidental Leather 8080DB M Includes
- (1) 8080DB M OxyLights Framer Set
- (1) OxyLights 3 Pouch Tool Bag
- (1) OxyLights 3 Pouch Fastener Bag
- (1) Hammer Holder
- (1) HD 3 in Ranger Work Belt
Occidental Leather 8080DB M Key Features
- 21 pockets and tool holders for organized carry
- Hand specific tool holder layout for efficiency
- Padded two ply nylon bags hold shape
- Industrial abrasion resistant nylon
- Leather tool holders with corner reinforcement
- Made in USA
Occidental Leather 8080DB M Applications
- Framing and general carpentry tool organization
- On site fastener and tool access for construction
- Deck building and exterior trim projects
- Remodeling tasks requiring multi tool carry
Occidental Leather 8080DB M Installation Overview
- Select Medium size; thread belt through both bags and hammer holder.
- Position tool bag on your dominant hand side; fastener bag opposite.
- Buckle belt and adjust fit using belt holes for comfortable support.
- Load tools and fasteners into dedicated pockets and holders.
- Verify balance and accessibility; re adjust as needed.
Occidental Leather 8080DB M Specifications
| Pockets & Tool Holders | 21 |
| Belt Size | Medium |
| Weight | 3.8 lbs |
| Material | Leather and Industrial Nylon |
Occidental Leather 8585LH SM Description
Built for production carpenters, the Heritage FatLip Tool Bag Set features 10 in deep bags with a full leather boot and a leather FatLip mouth that stays open and resists abrasion. Hand specific holder layout optimizes efficiency for left handed users. Padded two ply industrial nylon exteriors add durability and shape retention. Made in USA.
Occidental Leather 8585LH SM Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH SM Key Features
- FatLip leather mouth helps bags keep shape and resist wear
- Full leather boot for rugged, long term durability
- Hand specific tool layout for left handed workflows
- Padded two ply bags with abrasion resistant industrial nylon
- 3 in HD Ranger belt with center 2-in-1 tool and hammer holder
- Pockets and tool holders: 25
- Made in the USA
Occidental Leather 8585LH SM Applications
- Framing and production carpentry
- Organizing tools and fasteners on the jobsite
- Left handed tool belt setup for daily use
- General construction and remodeling tasks
Occidental Leather 8585LH SM Installation Overview
- Thread the pouches and 2-in-1 holder onto the HD 3 in Ranger belt.
- Configure as left handed: tool bag on left, fastener bag on right.
- Buckle belt and adjust for a secure, comfortable fit.
- Seat the hammer in the rear holder and load tools into dedicated pockets.
- Verify clearance and balance before working.
Occidental Leather 8585LH SM Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Small |
| Weight | 5.2 lbs |
| Materials | Leather, Nylon |
| Color | Green, Tan |
| Bag Depth | 10 in |
| Belt Width | 3 in |
| Hand | Left |
| Country of Origin | USA |
Occidental Leather 5089LH M Description
Built for framers, this left-handed Pro Leather setup delivers maximum capacity with seven pouches and 23 pockets and tool holders. Crafted from premium top-grain leather with copper-riveted reinforcements and a NoSpill tool holder system for secure, efficient organization.
Occidental Leather 5089LH M Includes
- (1) Seven Bag Framer Tool Belt Setup (5089LH M)
- (1) 5035 HD 3 inch Ranger Work Belt
- (1) 5062 4 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather 5089LH M Key Features
- Premium top-grain leather construction
- Seven-pouch framer layout; 23 pockets and tool holders
- 12 oz belting leather with steel roller buckle
- Copper-riveted reinforcement on main bags
- NoSpill tool holder system for secure layout
- Function engineered for modern framing workflows
- Made in USA
Occidental Leather 5089LH M Applications
- Framing: carry and organize nails, layout tools, and hand tools
- Carpentry: keep essential tools and fasteners accessible
- Jobsite setup: left-handed configuration for efficient workflow
- General construction tasks requiring high-capacity storage
Occidental Leather 5089LH M Installation Overview
- Size the belt: select Medium and adjust the steel roller buckle for a secure fit.
- Attach components: slide tool and fastener bags onto the Ranger belt; add hammer holder.
- Configure for left-hand use: place tool bag on left, fastener bag on right.
- Load tools and fasteners: distribute weight evenly across pouches.
- Final check: ensure rivets, stitching, and buckle are secure before use.
Occidental Leather 5089LH M Specifications
| Pockets & Tool Holders | 23 |
| Pouch Count | 7 |
| Belt Size | Medium |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Hand Orientation | Left-handed |
| Components | 5035 Belt; 5062 Fastener Bag; 5012 Hammer Holder; 5018DB Tool Bag with tape holder |
| UPC | 759244099805 |
| Country of Manufacture | USA |
Occidental Leather 8585LH XXL Description
Built for production carpenters, this left-handed Heritage FatLip setup features 10 inch deep bags with full leather boots and the signature leather FatLip mouth that stays open and resists abrasion. Padded, two-ply foam core pouches wrapped in industrial nylon keep their shape and stand up to heavy use.
Occidental Leather 8585LH XXL Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 inch Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH XXL Features
- FatLip leather mouth holds shape and resists wear
- Full leather boot for rugged durability
- Hand-specific tool layout for left-handed users
- Padded two-ply foam core helps bags keep form
- Industrial nylon exterior for high abrasion resistance
- 3 inch HD Ranger Belt for comfort and stability
- Includes center back 2-in-1 tool and hammer holder
- Made in USA
Occidental Leather 8585LH XXL Applications
- Framing and production carpentry
- Deck building and exterior construction
- Remodeling and general jobsite tool organization
- Finish prep and punch list tasks
Occidental Leather 8585LH XXL Installation Overview
- Select the correct belt size and orient the left-handed layout.
- Thread pouches onto the 3 inch Ranger belt in the preferred positions.
- Attach the 2-in-1 holder at the center back.
- Load tools and fasteners; adjust belt for secure fit.
Occidental Leather 8585LH XXL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XXL |
| Weight | 5.2 lbs |
| Material | Leather and Nylon |
| Bag Depth | 10 in |
| Belt Width | 3 in HD Ranger Belt |
| Handedness | Left |
| Made In | USA |
Occidental Leather 8087 XXL OxyLights Driver Set Description
Built for metal framing, finish carpentry and remodeling, this lightweight driver setup blends industrial nylon with leather reinforcements to reduce weight while staying jobsite tough. The right side gun bag 8068 includes a holster for impact or screw guns plus clamp and tool holders. The left side fastener bag B8064 features a double outer pouch layout for fasteners and small tools. Made in USA.
Includes
- (1) 8087 XXL OxyLights Driver Set
- (1) HD 3 in Ranger Leather Work Belt
- (1) OxyLights Fastener Bag with Double Outer Bag B8064
- (1) 2-in-1 Tool and Hammer Holder 5020
- (1) Impact or Screw Gun and Drill Bag 8068
Key Features
- 20 pockets and tool holders
- Hand specific tool holder layout
- Padded two ply bags maintain shape
- Industrial nylon with leather reinforced corners and holders
- HD 3 in Ranger leather belt included
- Made in USA
Applications
- Metal stud framing and layout
- Finish carpentry tasks
- Remodeling and punch list work
- Fastener and small tool organization
Installation Overview
- Measure your existing tool belt from buckle end to used hole to confirm XXL size.
- Thread the 8068 and B8064 bags onto the HD Ranger belt in your preferred layout.
- Secure the belt at the midpoint hole for optimal adjustment range.
- Load tools and fasteners into dedicated pockets and holsters.
- Adjust fit and balance as needed for comfort and access.
Specifications
| Pockets and Tool Holders | 20 |
| Belt Size | XXL |
| Weight | 4.1 lb |
| Materials | Leather, Industrial Nylon |
| Color | Black and Tan |
| Components | 8068 Gun Bag, B8064 Fastener Bag, 5020 Tool and Hammer Holder, 5035 HD 3 in Ranger Belt |
Occidental Leather B5080DBLH XL Pro Framer Set - Black
Professional leather tool belt system built for framers. Premium top grain leather bags with hand specific tool layout, NoSpill holders, and copper rivet reinforcement deliver jobsite durability and efficient workflow. XL size in OxyBlack with tan trim.
Includes
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5060 3 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Key Features
- Premium top grain leather construction for weather resistant durability
- NoSpill tool holder system keeps tools secure and accessible
- Hand specific tool placement supports natural working rhythm
- Copper rivet reinforced stress points
- Built in tape holster fits tapes up to 30 ft
- Made in USA
Applications
- Framing and rough carpentry
- General construction and remodeling
- Jobsite tool and fastener organization
- Left handed professional workflow setups
Installation Overview
- Select the correct belt size and position bags for left hand use.
- Thread the 5035 Ranger belt through each bag and the hammer holder.
- Buckle and adjust to a comfortable, balanced fit.
- Load tools and fasteners by function for efficient access.
- Recheck fit and tighten as needed before work.
Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | XL |
| Weight | 5.3 lbs |
| Material | Leather |
| Color | Black, Tan |
| Handedness | Left hand layout |
| Tape Holster Capacity | Up to 30 ft |
| Country of Origin | USA |
Occidental Leather B5080DBLHLG Description
Built for professional framers, this left-handed Pro Framer tool belt set is crafted from premium top grain leather for long-term, weather-resistant durability. The set delivers a balanced, hand-specific layout with 22 total pockets and holders, reinforced with copper rivets and the NoSpill system for secure, efficient tool access. Includes a 3 in. Ranger work belt, a 3 pouch Pro Tool Bag with tape holder, a 3 pouch Pro Fastener Bag, and a hammer holder. Made in the USA.
Occidental Leather B5080DBLHLG Includes
- (1) B5080DBLHLG Pro Framer Tool Belt Set — Left-Handed, Large
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5060 3 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather B5080DBLHLG Key Features
- Premium top grain leather construction for work-ready durability
- Left-handed, hand-specific layout supports natural workflow
- NoSpill tool holder system keeps tools secure yet accessible
- Copper-riveted stress points for extended service life
- Built-in tape holster fits tapes up to 30 ft
- 22 total pockets and tool holders
- Made in the USA
Occidental Leather B5080DBLHLG Applications
- Framing carpentry where fast access to tools and fasteners is essential
- General carpentry tasks in demanding outdoor jobsite conditions
- Organizing and carrying hand tools, fasteners, and layout accessories
- Professional builder setups requiring a left-handed tool layout
Occidental Leather B5080DBLHLG Installation Overview
- Measure your current tool belt from the buckle end to the hole you use to confirm Large sizing per the size guide.
- Position the left-handed layout: Tool Bag on left side, Fastener Bag on right side.
- Adjust the 3 in. Ranger belt to the midpoint hole for a secure fit over work clothing.
- Load tools and fasteners into the intended holders; seat tape in the built-in holster.
- Walk and work briefly; re-adjust belt tension and bag placement for comfort.
Occidental Leather B5080DBLHLG Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | Large |
| Material | Leather |
| Weight | 5.3 lbs |
| Color | Black, Tan |
| Orientation | Left-handed layout |
| Built-in Tape Holster | Fits up to 30 ft tapes |
| Components | 5035 Belt, 5018DB Tool Bag, 5060 Fastener Bag, 5012 Hammer Holder |
| Country of Origin | USA |
Occidental Leather 5530 XXXL Description
The Stronghold Big Oxy Set delivers maximum capacity and organization with round bottom full capacity leather bags and a heavy duty 3 in work belt. Built for demanding pros, it features a hand specific NoSpill holder layout and premium top grain leather construction.
Occidental Leather 5530 XXXL Includes
- (1) HD 3 in Ranger Work Belt
- (1) Big Oxy Fastener Bag
- (1) 2-in-1 Tool and Hammer Holder
- (1) Big Oxy Tool Bag
Occidental Leather 5530 XXXL Key Features
- Round bottom full capacity bags for added space and durability
- NoSpill hand specific tool holder system
- Premium top grain leather construction
- 3 in heavy duty work belt made of 12 oz English bridle leather with steel roller buckle
- Function engineered for framing, trim, and general carpentry
Occidental Leather 5530 XXXL Applications
- Framing and rough carpentry setups
- Trim and finish carpentry tool organization
- General construction and remodeling
- Jobsite tool carry and protection
Occidental Leather 5530 XXXL Installation Overview
- Measure where you wear the belt to confirm size.
- Attach the fastener and tool bags to the belt in preferred positions.
- Clip on the 2-in-1 tool and hammer holder to the belt center or side.
- Load tools and adjust belt for comfort and balance.
- Check all rivets, clips, and holders before use.
Occidental Leather 5530 XXXL Specifications
| Pockets and Tool Holders | 28 |
| Weight | 6.3 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Belt Size | XXX-Large |
Occidental Leather 5530 XXL Description
Built for demanding pros, the Stronghold Big Oxy tool belt setup delivers maximum capacity and organization with round bottom leather bags, a 3 inch heavy duty English bridle leather belt, and 28 pockets and tool holders. Includes Oxy Tool Shield and 2 in 1 Tool and Hammer Holder. Made in USA.
Occidental Leather 5530 XXL Includes
- (1) Stronghold Big Oxy Tool Belt Set
- (1) HD 3 inch Ranger Work Belt
- (1) Big Oxy Fastener Bag
- (1) 2 in 1 Tool and Hammer Holder
- (1) Big Oxy Tool Bag
- (1) Oxy Tool Shield
Occidental Leather 5530 XXL Key Features
- Round bottom full capacity bags for added space and durability
- NoSpill hand specific tool holder layout
- Premium top grain leather throughout
- 3 inch heavy duty English bridle leather belt with steel roller buckle
- Purpose built for framing, trim, and general carpentry
- Made in the USA
Occidental Leather 5530 XXL Applications
- Framing tasks requiring high capacity tool storage
- Trim work and finish carpentry organization
- General carpentry and remodeling
- Jobsite tool protection and quick access
- Daily professional use in demanding conditions
Occidental Leather 5530 XXL Installation Overview
- Select correct belt size and position belt at working height.
- Attach Big Oxy tool and fastener bags to the belt loops.
- Clip on the Oxy Tool Shield and mount the 2 in 1 Tool and Hammer Holder.
- Load tools into hand specific holders and adjust belt for comfort.
- Verify secure fit and balance before use.
Occidental Leather 5530 XXL Specifications
| Pockets and Tool Holders | 28 |
| Weight | 6.3 lbs |
| Material | Premium leather |
| Color | Brown and Tan |
| Belt Width | 3 in |
| Belt Size | XX Large |
| Country of Manufacture | USA |
NOTE: Always size your tool belt using a belt measurement, not pant waist size, to ensure proper fit and comfort.
Occidental Leather 8060LH OxyLights 3 Pouch Fastener Bag - Left Handed
Occidental Leather 8060LH OxyLights 3 Pouch Fastener Bag - Left Handed
Occidental Leather 8060LH Description
The OxyLights 3 pouch fastener bag for left handed users is built from industrial nylon with leather reinforcements. Designed for framing and general carpentry, it provides dedicated holders for a 1 inch blade square, angle square, cat's paw loop, driver bits and more. Left handed layout is worn on the right side for quick access.
Occidental Leather 8060LH Includes
- (1) 8060LH OxyLights 3 Pouch Fastener Bag
Occidental Leather 8060LH Features
- 9 pockets and tool holders for organized storage
- Industrial nylon body with leather trim for durability
- Left handed layout, worn on right side
- Dedicated holders for blade square, angle square, cat's paw, driver bits
- Made in the USA
Occidental Leather 8060LH Applications
- Framing tasks requiring quick access to fasteners and layout tools
- General carpentry tool and fastener organization
- Left handed setups worn on the right side of the belt
Occidental Leather 8060LH Installation Overview
- Thread the bag onto a compatible work belt.
- Position on the right side for left handed use.
- Load fasteners and tools into the designated pockets and holders.
- Check access and balance before starting work.
Occidental Leather 8060LH Specifications
| Pockets and Tool Holders | 9 |
| Material | Leather, Nylon |
| Color | Brown, Green |
| Weight | 1.2 lbs |
| Main Bag Size | 9 x 8 in |
| Outer Bag Size | 8 x 6 in |
| Upper Bag Size | 4.5 x 4.5 in |
| Orientation | Left Handed, worn on right side |
| Country of Origin | USA |
Occidental Leather 8062LH Description
The left handed OxyLights 4 pouch fastener bag is built from premium leather and industrial nylon for durable, lightweight organization. Designed for framing and general carpentry, it provides dedicated holders for a 1 inch blade square, angle square, cat's paw loop, driver bits, and more, and is worn on the right side for left handed users.
Occidental Leather 8062LH Includes
- (1) Bag
Occidental Leather 8062LH Features
- Popular OxyLights fastener bag for framing and general carpentry
- Left handed layout worn on the right side
- Holders for 1 inch blade square, angle square, cat's paw loop, driver bits
- Premium leather and industrial nylon construction
- Made in USA
Occidental Leather 8062LH Applications
- Framing tool and fastener organization
- General carpentry tasks
- Left handed jobsite setup worn on right side
Occidental Leather 8062LH Installation Overview
- Slide the bag onto a compatible work belt.
- Wear on the right side for left handed access.
- Place squares, bits, and small tools into designated holders.
- Load fasteners into the main and secondary pouches.
- Check balance and adjust position for comfort.
Occidental Leather 8062LH Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 in x 8 in |
| Middle Bag | 8 in x 6 in |
| Outer Bag | 5.5 in x 5.5 in |
| Upper Bag | 4.5 in x 4.5 in |
| Material | Premium leather and industrial nylon |
| Color | Green |
| Weight | 1.3 lbs |
| Handedness | Left handed (wear on right side) |
| Country of Origin | USA |
| UPC | 759244100303 |
Occidental Leather 8585 SM Description
Heritage FatLip tool belt set built for production carpenters. Ten inch deep bags feature a full leather boot and a distinctive leather FatLip mouth that holds its shape, stays open, and resists abrasion. Hand specific holders and padded two ply construction deliver comfort and organization.
Occidental Leather 8585 SM Includes
- (1) Heritage FatLip Fastener Bag
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in. Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
Occidental Leather 8585 SM Features
- 25 pockets and tool holders
- Hand specific tool organization
- Padded two ply bags maintain shape
- Industrial nylon with leather reinforcements for durability
- Full leather boot and FatLip leather mouth for abrasion resistance
- Made in USA
Occidental Leather 8585 SM Applications
- General carpentry and framing tasks
- Layout, measuring, and fastening workflows
- Trim and finish punch lists
- Jobsite tool and fastener organization
Occidental Leather 8585 SM Installation Overview
- Select the correct belt size and thread the tongue through the buckle.
- Position tool and fastener bags on each side for hand preference.
- Attach the 2-in-1 holder and any accessories to desired locations.
- Load tools evenly and adjust belt for a snug, comfortable fit.
- Verify pouches are secure before use.
Occidental Leather 8585 SM Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Small |
| Bag Depth | 10 in. |
| Weight | 5.2 lb |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Main Bag | 10 in. x 10 in. |
| Outer Bag | 9 in. x 6 in. |
| Upper Bag | 5 in. x 4.5 in. |
| UPC | 759244282306 |
Occidental Leather 9525LH SM Description
Engineered for trim, finish, and light framing work, this left-handed Finisher Set combines abrasion-resistant nylon bags with leather reinforcements on a padded 3 in work belt. Round-bottom foam-core bags hold their shape, and the set includes the Oxy Tool Shield for sharp tool protection. Small size, 25 total pockets and holders, and a lightweight 3.1 lb build.
Occidental Leather 9525LH SM Includes
- (1) 3 in Leather & Nylon Work Belt
- (1) OxyFinisher Fastener Bag
- (1) 2-in-1 Tool & Hammer Holder
- (1) OxyFinisher Tool Bag
Occidental Leather 9525LH SM Key Features
- Left-handed layout to optimize workflow
- Round-bottom, full-capacity bags with two-ply foam core maintain shape
- Padded 3 in nylon belt with leather tongue and steel roller buckle
- Includes Oxy Tool Shield for sharp tool protection
- 25 pockets and tool holders; compact, lightweight system
- Leather and industrial nylon construction; Made in USA
Applications
- Trim carpentry and finish work
- Light framing tasks
- Cabinetry and interior trim installation
- Punch list and detail work in tight spaces
Installation Overview
- Put on the belt over typical work clothing where you will wear it.
- Select the hole that gives a secure, comfortable fit.
- Arrange tool bag on dominant side for left-hand use and fastener bag opposite.
- Seat pouches and holders; add the Oxy Tool Shield where desired.
- Load tools and adjust for balance and access.
Occidental Leather 9525LH SM Specifications
| Pockets & Tool Holders | 25 |
| Belt Size | Small |
| Belt Width | 3 in |
| Weight | 3.1 lb |
| Material | Leather, Nylon |
| Color | Black, Tan |
| Orientation | Left-handed |
| Made In | USA |
| UPC | 759244210804 |
Occidental Leather 5080LH SM Pro Framer Package - Left Description
Built for professional framers, this left-handed Pro Leather setup uses premium top-grain leather with NoSpill tool holders and hand-specific layout for efficient workflow. Reinforced with copper rivets and a 12-oz belting leather belt with steel roller buckle, it provides durable, weather-ready performance. Made in USA.
Includes
- (1) 5035 HD 3 in Ranger Work Belt
- (1) 5060 3 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018 2 Pouch Pro Tool Bag with Tape Holder
Key Features
- Premium top-grain leather construction
- NoSpill tool holder system keeps tools secure
- Hand-specific, left-handed layout for optimized rhythm
- Hand-set copper rivets reinforce high-wear points
- 12-oz belting leather with steel roller buckle
- 21 total pockets and tool holders
- Made in USA
Applications
- Framing and carpentry tool carry
- General construction and remodeling
- Jobsite organization of tools and fasteners
- Left-handed trades requiring hand-specific layout
Installation Overview
- Measure and select correct belt size; fasten at midpoint hole.
- Position tool bag on left side and fastener bag on right for left-handed use.
- Secure hammer holder at rear and adjust belt for comfort.
- Load tools and fasteners; verify balance and access.
Specifications
| Pockets and Holders | 21 |
| Belt Size | Small |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Hand | Left |
| Country of Origin | USA |
Occidental Leather B8080DBXL XL Black OxyLights Framer Set with Double Outer Bags
$344.90
Unit price perOccidental Leather B8080DBXL XL Black OxyLights Framer Set with Double Outer Bags
$344.90
Unit price perOccidental Leather B8080DB XL Description
The OxyLights framer tool belt set pairs abrasion resistant industrial nylon with leather reinforcements to cut weight without sacrificing durability. Hand specific holder layout, double outer bags, and a heavy duty 3 in. Ranger Work Belt deliver organization and comfort for framing and general carpentry.
Occidental Leather B8080DB XL Includes
- (1) HD 3 in. Ranger Work Belt (5035)
- (1) OxyLights 3 Pouch Fastener Bag (B8060)
- (1) OxyLights 3 Pouch Tool Bag (B8018DB)
- (1) Hammer Holder (5012)
Occidental Leather B8080DB XL Key Features
- Hand specific tool holders for efficient workflow
- Padded two ply nylon bags hold their shape
- Leather reinforced corners and tool holders
- 12 oz belting leather with steel roller buckle
- Extremely abrasion resistant industrial nylon
Occidental Leather B8080DB XL Applications
- Framing and rough carpentry
- Deck and wall layout work
- General carpentry and remodeling
- Jobsite fastener and tool organization
- Daily production building tasks
Occidental Leather B8080DB XL Installation Overview
- Measure and select the correct belt size per manufacturer sizing guidance.
- Thread pouches and hammer holder onto the Ranger belt in your preferred order.
- Buckle the belt and adjust for a snug, comfortable fit at the midpoint hole.
- Load essential tools and fasteners; balance weight across both bags.
- Optionally attach suspenders if desired and verify secure carry before use.
Occidental Leather B8080DB XL Specifications
| Pockets and Holders | 21 |
| Material | Leather, Industrial Nylon |
| Ideal For | Framers |
| Belt Size | X-Large |
| Color | Black |
| Weight | 4.5 lb |
| Made In | USA |
Occidental Leather 9525LHM Description
Left-handed Finisher tool belt system built for trim, finish, and light framing. Hand-specific tool placement, round-bottom bags that hold their shape, and a padded 3 inch work belt deliver comfort and efficiency. Includes Oxy Tool Shield protection in each bag and a 2-in-1 Tool and Hammer Holder.
Occidental Leather 9525LHM Includes
- (1) 3 inch Leather and Nylon Work Belt
- (1) OxyFinisher Fastener Bag
- (1) 2-in-1 Tool and Hammer Holder
- (1) OxyFinisher Tool Bag
Occidental Leather 9525LHM Key Features
- 25 pockets and tool holders
- Innovative round-bottom, full-capacity tool bags
- Includes 2003 Oxy Tool Shield in each bag
- Hand-specific tool holder layout for left-handed users
- Engineered for trim, finish, and light framing tasks
- 12 oz belting leather with steel roller buckle and padded nylon 3 inch work belt
Occidental Leather 9525LHM Applications
- Trim carpentry and punch list work
- Finish carpentry and cabinet install
- Light framing and layout
- General tool organization on the jobsite
Occidental Leather 9525LHM Installation Overview
- Measure an existing belt you wear over work clothes to find belt size.
- Buckle the belt on your waist where it will be worn and note the hole used.
- Measure from the buckle to that hole; select the belt size that matches.
- Position tool and fastener bags for a left-handed layout; secure holders.
- Load tools and check balance and fit; adjust for comfort.
Occidental Leather 9525LHM Specifications
| Pockets and Holders | 25 |
| Belt Size | Medium |
| Weight | 3.1 lbs |
| Material | Leather, Nylon |
| Color | Black, Tan |
| Hand | Left |
