Occidental Leather
Occidental Leather 8585LH LG Heritage FatLip Tool Bag Set - Left
Occidental Leather 8585LH LG Description
The Heritage FatLip Tool Belt Set is engineered for production carpenters. Ten inch deep bags feature a full leather boot and the distinctive FatLip leather mouth that keeps the bag open and protected from abrasion. Hand specific holder layout and padded two ply construction maintain shape and accessibility.
Occidental Leather 8585LH LG Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH LG Key Features
- 25 pockets and tool holders
- Hand specific tool holder layout for left handed users
- Padded two ply bags hold shape
- Industrial nylon with leather reinforcements for abrasion resistance
- Full leather boot and FatLip leather mouth
- Made in USA
Occidental Leather 8585LH LG Applications
- Framing and general carpentry
- Production carpentry tool organization
- Fastener and small tool storage on the jobsite
- Left handed belt system setups
Occidental Leather 8585LH LG Installation Overview
- Measure an existing belt from buckle to the hole used to determine belt size.
- Wear the belt over normal work clothing and confirm fit.
- Attach tool bags and holders to the belt in a left handed layout.
- Distribute tools and fasteners and adjust for comfort and balance.
- Check all rivets and loops before use.
Occidental Leather 8585LH LG Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Large |
| Weight | 5.2 lbs |
| Materials | Leather, Nylon |
| Color | Green, Tan |
| Hand | Left |
| Bag Depth | 10 in |
NOTE: Measure the belt itself to select the correct size; pant waist size does not equal belt size.
Occidental Leather 8585LH LG Heritage FatLip Tool Bag Set - Left
Left hand Heritage FatLip belt set, large
✓ Left-handed layout (wear on right side)
✓ FatLip leather mouth stays open & resists abrasion
✓ Full leather boot for rugged durability
✓ 2-in-1 outer holder for tools or hammer
✓ Made in USA
Leather and Nylon Gear Care
- Brush off dust and debris after use; wipe with a damp cloth.
- Clean tough grime with mild soap and water; air dry fully.
- Condition leather periodically with leather conditioner to maintain suppleness.
- Avoid prolonged sun exposure and harsh chemicals that can degrade materials.
- Store in a cool, dry place; do not compress bags to preserve shape.
- FatLip leather mouth keeps bag open and resists wear
- Full leather boot with padded two ply body for structure
- Hand specific layout for left handed users
- Industrial nylon with leather reinforcements
- Pockets and holders: 25
- Belt Size: Large
- Bag Depth: 10 in
- Weight: 5.2 lbs
- Materials: Leather, Nylon
- Color: Green, Tan
- Made in USA
2 low in stock
Pay with
Top Sellers
Our Highest Quality Products
Newest Arrivals
Newest Arrivals to Tool Belt Outlet
Product Information
More About Occidental Leather 8585LH LG Heritage FatLip Tool Bag Set - Left
Occidental Leather 8585LH LG Description
The Heritage FatLip Tool Belt Set is engineered for production carpenters. Ten inch deep bags feature a full leather boot and the distinctive FatLip leather mouth that keeps the bag open and protected from abrasion. Hand specific holder layout and padded two ply construction maintain shape and accessibility.
Occidental Leather 8585LH LG Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH LG Key Features
- 25 pockets and tool holders
- Hand specific tool holder layout for left handed users
- Padded two ply bags hold shape
- Industrial nylon with leather reinforcements for abrasion resistance
- Full leather boot and FatLip leather mouth
- Made in USA
Occidental Leather 8585LH LG Applications
- Framing and general carpentry
- Production carpentry tool organization
- Fastener and small tool storage on the jobsite
- Left handed belt system setups
Occidental Leather 8585LH LG Installation Overview
- Measure an existing belt from buckle to the hole used to determine belt size.
- Wear the belt over normal work clothing and confirm fit.
- Attach tool bags and holders to the belt in a left handed layout.
- Distribute tools and fasteners and adjust for comfort and balance.
- Check all rivets and loops before use.
Occidental Leather 8585LH LG Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Large |
| Weight | 5.2 lbs |
| Materials | Leather, Nylon |
| Color | Green, Tan |
| Hand | Left |
| Bag Depth | 10 in |
NOTE: Measure the belt itself to select the correct size; pant waist size does not equal belt size.
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
