Occidental Leather Framing Tool Belts & Carpenter Bags

Occidental Leather 5035 SM Key Features

• 3 in wide main belt for support
• 2 in leather tongue with steel roller buckle
• Premium 12-14 oz bridle leather construction
• Edge stitched for long-term durability
• Ideal foundation for tool and fastener bags
• Made in USA

Occidental Leather 5035 SM Applications

• Base belt for professional tool carry systems
• Construction and carpentry tool rigs
• Framing, finish work, and general trades
• Pairing with pouches, holsters, and fastener bags

Occidental Leather 5035 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. Thread tool bags and accessories onto the 2 in tongue/loop.
4. Buckle at the midpoint hole; adjust within the 4 in range each way.
5. Ensure comfortable fit over work clothing before use.

Occidental Leather 5002 M Features

• Premium 12-14 oz bridle leather, custom tanned in the USA
• Edge stitched for durability and clean look
• Heavy duty 2 in steel roller buckle with nickel finish
• Slim 2 in width for compact tool bag setups
• Made in the USA

Occidental Leather 5002 M Applications

• Base belt for tool rigs and pouch systems
• Replacement belt for Occidental Leather setups
• Low profile carry for compact tool bags
• General jobsite wear requiring a durable work belt

Occidental Leather 5002 M Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the most used hole.
2. Select the size closest to that midpoint measurement.
3. If no belt to measure, add 4 in to pant waist for approximate midpoint.
4. Thread the buckle and secure at the midpoint hole; adjust as needed.

Occidental Leather 1546 Features

• Ultra-light industrial nylon construction with padded shoulders
• Even weight distribution for improved comfort
• Chest-height pockets for pencils or clip-on items
• Heavy duty spring clips for quick on/off
• Leather loop attachment system fits up to 3 inch tool belts
• Made in USA

Occidental Leather 1546 Applications

• Support and balance heavy tool belt loads
• Reduce back and hip strain during prolonged wear
• Hold small items at chest height for quick access
• Integrate with tool belts up to 3 inches wide
• Jobsite use for carpenters, electricians, and general trades

Occidental Leather 1546 Installation Overview

1. Slide your tool belt through the leather loop attachments.
2. Secure the heavy duty spring clips.
3. Adjust shoulder straps and back/front buckles for fit.
4. Fasten the chest strap.
5. Load tools and confirm balanced weight distribution.

Occidental Leather 8580M Features

• Hand-specific tool holder layout for efficient workflow
• Padded two-ply bags maintain shape when empty or loaded
• Extremely abrasion-resistant industrial nylon exterior
• Full leather boot with distinctive FatLip leather mouth
• 3 in HD Ranger belt with rear 2-in-1 tool and hammer holder
• Pockets and tool holders: 25
• Made in USA

Occidental Leather 8580M Applications

• Framing and production carpentry
• General carpentry and remodeling
• Jobsite organization for tools and fasteners
• Finish work requiring hand-specific pouch layout

Occidental Leather 8580M Installation Overview

1. Put on the belt over your typical work clothing and note the hole you use.
2. Remove the belt, lay it flat, and measure from the end of the buckle to that hole.
3. Select Medium if your measurement is near 37 in; adjust using the midpoint hole for fit.

Occidental Leather 5509 Features

• Made in USA
• Fits up to a 3 in work belt
• Pre-riveted D ring loops for slip-on attachment
• Compatible with suspenders models 1546, 5009 and 5055

Occidental Leather 5509 Applications

• Add D ring attachment points to non-suspender belts
• Convert work belts to be suspenders-ready
• Replace or expand attachment loops on belts
• Set up multiple belts for quick suspender transfer

Occidental Leather 5509 Installation Overview

1. Slide each loop onto the belt and position evenly.
2. Align D rings at front and rear as preferred.
3. Attach suspender clips to the D rings.
4. Put on belt and adjust suspender length for comfort.

Occidental Leather 8581 Key Features

• FatLip leather mouth keeps the bag formed, open, and protected from abrasion
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated sleeves and pouches for tri-square, cat's paw, nail sets, and driver bits
• Accepts belts up to 3 in wide
• Made in the USA

Occidental Leather 8581 Applications

• Carrying nails, screws, and common fasteners
• Organization for angle square, tri-square, and layout tools
• Holstering cat's paw and driver bits for framing and drywall tasks
• General construction use on the non-dominant side

Occidental Leather 8581 Installation Overview

1. Slide the bag onto a work belt up to 3 in wide.
2. Wear on the left side for right-handed setups.
3. Load fasteners and tools into main and outer compartments.
4. Seat the angle square in the built-in holster and secure small bits in dedicated pouches.
5. Verify comfortable position and accessibility before work.

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 2003 Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, diagonal cutter; plus one round pencil
• Lightweight, compact, and jobsite-ready
• Made in the USA

Occidental Leather 2003 Applications

• Safe storage of sharp edge tools on the belt or in bags
• Protecting tool pouches and clothing from blade damage
• Keeping a round pencil handy alongside primary tool
• Organizing chisels, knives, and cutters for quick access

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it to a tool bag edge or pocket.
2. Insert the primary tool into the main compartment.
3. Place a round pencil in the dedicated side slot.
4. Ensure the clip is fully seated and the tool is secure before use.

Occidental Leather 5062 Features

• 4 pouch layout for compact, expanded capacity
• 10 pockets and tool holders for fasteners and layout gear
• Tool-specific slots for blade square, angle square, driver bits, and cat's paw
• Full-grain leather construction for long-term durability
• Worn on the non-dominant side; available as left-hand 5062LH
• Made in the USA

Occidental Leather 5062 Applications

• Framing and general carpentry tool and fastener carry
• Organizing layout tools like blade and angle squares
• Quick access to driver bits, nail sets, and cat's paw
• Left-side fastener storage for right-handed users

Occidental Leather 5062 Installation Overview

1. Slide the pouch onto a 3 in belt or compatible work belt.
2. Position on the left side for right-handed use or select 5062LH for left-handed layout.
3. Load fasteners and tools into the four stacked compartments.
4. Place blade square and angle square in designated holders; store bits and cat's paw in slots.
5. Confirm secure fit and balanced carry before use.

Occidental Leather 8089 LG Key Features

• Hand specific tool layout for efficient workflow
• Padded two ply bags maintain shape
• Extremely abrasion resistant industrial nylon body
• Leather tool holders and corner reinforcements
• 12 oz belting leather with steel roller buckle
• Pockets and tool holders: 22
• Weight: 4.1 lbs

Occidental Leather 8089 LG Applications

• Framing and general carpentry tool organization
• Jobsite fastener and hand tool carry
• Daily wear belt system for professional builders

Occidental Leather 8089 LG Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. If you do not have a belt, add 4 inches to pant waist to estimate mid range.
4. Adjust the 5035 belt using the roller buckle for a secure fit.

Occidental Leather 5080DB-XL Key Features

• Premium top-grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand-specific layout supports natural workflow
• Copper-riveted reinforcement at stress points
• Built-in tape holster fits tapes up to 30 ft FatMax
• Made in USA

Occidental Leather 5080DB-XL Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Daily professional construction use

Occidental Leather 5080DB-XL Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm XL sizing.
2. Position tool bag on dominant hand side; fastener bag on opposite side.
3. Adjust belt to midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners; use NoSpill holders and tape holster as intended.
5. Re-check fit and balance before use.

Occidental Leather 8582 Key Features

• 10 in deep bag with full leather boot for structure and durability
• Leather FatLip mouth holds shape, stays open, and protects against abrasion
• Right-side layout for tools most accessed with the right hand
• 13 total pockets and holders for organized storage
• Made in the USA

Occidental Leather 8582 Applications

• Organizing and carrying hand tools on the jobsite
• Carpentry and framing tool storage
• General construction and remodeling
• Punch list and service work

Occidental Leather 8582 Installation Overview

1. Thread the pouch onto your work belt.
2. Wear on the right side for right-hand access.
3. Load tools into the dedicated pockets and holders.
4. Verify secure fit and balanced weight before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5080LG Key Features

• Premium top grain leather construction
• Hand specific tool holders for working rhythm
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders
• Left handed option available as 5080LH
• Made in USA

Occidental Leather 5080LG Applications

• Framing and general carpentry tool carry
• On site construction and renovation
• Efficient organization of fasteners and hand tools
• Daily use by professional builders

Occidental Leather 5080LG Installation Overview

1. Place belt over typical work clothing where it will be worn.
2. Measure from the buckle to the hole you use most.
3. Select the belt size mid range closest to that measurement.
4. Adjust using the 9 holes and position bags and holders as preferred.

Occidental Leather 9525XXL Key Features

• 25 pockets and tool holders
• Round bottom, full capacity bags maintain shape
• Includes 2003 Oxy Tool Shield
• Hand specific tool layout for work rhythm
• 12 oz belting leather with steel roller buckle and padded nylon belt

Occidental Leather 9525XXL Applications

• Trim installation and finish carpentry
• Light framing and punch list tasks
• Cabinet, door, and window setting
• General tool carry and organization on site

Occidental Leather 9525XXL Installation Overview

1. Measure existing belt from buckle to the hole used to determine belt size.
2. Adjust the work belt so pouches ride at a comfortable height.
3. Place fastener bag on left and tool bag on right for standard layout.
4. Attach Oxy Tool Shield and 2-in-1 holder to preferred positions.
5. Load tools and confirm balance and comfort before use.

Occidental Leather 5020 Key Features

• Two tools, one footprint for belt space efficiency
• Slides easily onto standard tool belts
• 12 oz English bridle leather construction for durability
• Purpose built for pros and DIY users
• Made in USA

Occidental Leather 5020 Applications

• Carry a hammer and pliers or similar hand tool at the ready
• Carpentry and framing work on site
• General construction and remodel tasks
• Workshop and home project tool carry

Occidental Leather 5020 Installation Overview

1. Thread the holder loop onto your work belt.
2. Position at the preferred hip location.
3. Insert hammer into the metal loop.
4. Place a hand tool into the leather pocket.
5. Check clearance and adjust belt position for comfort.

Key Features

• 0.75 in plus thick sheepskin pads for maximum cushioning
• Wool naturally insulates, cools, and wicks moisture
• Straps adjust to fit belts up to 3 in wide
• Premium leather outer for durability
• Made in USA

Applications

• Adds comfort and padding to tool or safety belts
• Reduces pressure points and edge bite during heavy loads
• Suitable for year-round jobsite wear
• Compatible with most 3 in wide work belts

Installation Overview

1. Loosen or remove your existing work belt.
2. Position the liner with sheepskin toward the body.
3. Thread or buckle the adjustable straps around the belt.
4. Tighten evenly; allow 1 to 2 in extra belt length.
5. Check fit and make final adjustments for comfort.

Occidental Leather 8018DB Features

• Popular OxyLights configuration with right-hand layout
• Dedicated holders for common hand tools and tape up to 35 ft
• Main bag corners reinforced for durability
• Leather and industrial nylon construction
• Made in the USA

Occidental Leather 9855 Key Features

• FatLip bag mouth stays open and resists abrasion
• Main bags 10 in deep with full leather boot
• Adjust-to-Fit belt fits 32 in to 41 in waist sizes
• D rings pre installed for suspension system compatibility
• Includes rear 2 in 1 Tool and Hammer Holder and Oxy Tool Shield
• 24 total pockets and tool holders
• Made in USA

Occidental Leather 9855 Applications

• Carry and organize hand tools, fasteners, and accessories on the jobsite
• Framing and general carpentry tasks
• Remodeling and punch list work requiring frequent tool access
• Use with suspension systems for added support

Occidental Leather 9855 Installation Overview

1. Measure where you wear your tool belt and select the Adjust to Fit range accordingly.
2. Place belt over work clothing and buckle at a comfortable midpoint hole.
3. Adjust belt tabs to fit 32 in to 41 in waist sizes.
4. Position tool and fastener bags on preferred sides and secure.
5. Attach the 2 in 1 holder and Oxy Tool Shield; add suspenders to D rings if desired.

Occidental Leather 5093 Key Features

• Padded shoulder yoke lined with Dri-Lex for moisture management
• Fully adjustable straps for a personalized fit
• Even weight distribution to reduce lower back strain
• 25 total pockets and holders keep tools accessible
• Right-handed layout; hand-specific tool placement
• Includes 5156 Cradle Hammer Holder on rear
• One size fits most; expansion kit 5045 available for builders over 6 ft 2 in
• Made in the USA

Occidental Leather 5093 Applications

• Framing and general carpentry tool carry
• Remodeling projects requiring high-capacity organization
• Jobsites where belt-free load distribution is preferred
• All-day wear to reduce hip and lower back fatigue
• Use with clip-on holders and accessories for custom setups

Occidental Leather 5093 Installation Overview

1. Adjust shoulder straps and chest strap for a secure, comfortable fit.
2. Attach fastener and tool bags to the suspension rings.
3. Clip on the hammer holder and accessory holders as desired.
4. Load tools evenly across both sides to balance weight.
5. Fine-tune strap tension and verify unrestricted movement.

Occidental Leather 5191 M Features

• Unique one-piece toolbelt assembly for balanced load
• Premium top-grain leather construction
• Sheepskin-lined interior for comfort
• Hand-specific tool holders with NoSpill system
• Copper-riveted main bags for durability
• Function-engineered layout based on 5060 and 5018 bags
• Made in USA

Occidental Leather 5191 M Applications

• Framing and general carpentry tool organization
• Remodeling projects requiring quick tool access
• Finish and trim work with hand-specific layout
• Jobsite setups needing secure, no-spill holders
• Daily professional use in demanding outdoor conditions

Occidental Leather 5191 M Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove and lay belt flat; measure from buckle end to the used hole.
3. Match measurement to size chart; select Medium if midpoint is 37 in.
4. Adjust fit using the midpoint hole with 4 in range each way.

Occidental Leather 9515 Features

• Adjustable fit for pant waist 32 to 41
• Fixed bag design prevents shifting
• D rings pre-installed for suspender attachment
• Padded two-ply bags hold their shape
• Extremely abrasion-resistant industrial nylon
• Leather tool holders and corner reinforcement
• Includes High Mount Hammer Holder 5059
• Hand-specific tool placement for efficient workflow
• Left-handed model available as 9515LH

Occidental Leather 9515 Applications

• Framing and rough carpentry
• Jobsite tool and fastener organization
• Use with suspender systems via pre-installed D rings
• Seasonal gear changes requiring belt size adjustment
• Daily professional construction work

Occidental Leather 9515 Installation Overview

1. Measure where you wear your tool belt and set belt size to fit 32 to 41 pant waist.
2. Position tool bag on dominant side and fastener bag on opposite side.
3. Secure the belt and lock the adjust-to-fit crossover system.
4. Attach the removable hammer holder and any suspenders to D rings.
5. Load tools and fasteners; confirm bags are fixed and balanced.

Occidental Leather 5530 XL Features

• Round bottom full-capacity leather bags for greater storage and wear
• Premium top-grain leather with heritage-quality construction
• Hand-specific NoSpill tool holder system
• 3 in English bridle leather belt with steel roller buckle
• Pockets and tool holders: 28
• Includes Oxy Tool Shield and 2-in-1 tool and hammer holder
• Belt size: XL

Occidental Leather 5530 XL Applications

• Framing and rough carpentry tool carry
• Trim carpentry and finish work organization
• General construction and remodeling
• On-belt storage for measuring, cutting, and fastening tools
• Daily professional jobsite use

Occidental Leather 5530 XL Installation Overview

1. Size the belt to XL fit and fasten the steel roller buckle.
2. Slide tool and fastener bags onto the belt and position as preferred.
3. Attach the 2-in-1 tool and hammer holder and Oxy Tool Shield to the belt or bag loops.
4. Load tools into hand-specific pockets to prevent spills.
5. Adjust belt and bag placement for balance and comfort.

Occidental Leather 2500 Features

• Wide padded shoulder support lined with Dri Lex for comfort
• Fully adjustable straps for a personalized fit
• Even load distribution to reduce fatigue
• 17 pockets and holders to minimize tool clutter
• Quick release chest strap buckle for fast on off
• Heavy duty D ring for hanging storage

Occidental Leather 2500 Applications

• Framing tasks where balanced tool carry is needed
• Electrical work requiring quick access to hand tools
• Concrete work and general construction
• Trim and finish work in tight spaces

Occidental Leather 2500 Installation Overview

1. Adjust shoulder straps and chest buckle for a comfortable fit.
2. Attach compatible tool bags to the 3 inch leather belting as needed.
3. Load tools evenly across pockets to balance weight.
4. Snap the chest strap buckle to secure the vest.
5. Use the D ring for hanging storage when not in use.