Electrician Tool Belts & Bags

Occidental Leather 5589 Features

• All leather construction for durability
• 25 pockets and holders to organize electrician essentials
• Heavy-duty electrical tape chain and metal utility clip
• Designed specifically for journeyman electricians
• Black leather tool holders with reinforced stitching
• Right-hand wear layout; left-hand version available

Occidental Leather 5589 Applications

• Commercial and residential electrical work
• Daily organization and carry of electrician hand tools
• Belt-mounted access to screwdrivers, pliers, meters, and testers
• Handed layouts to match preferred workflow

Occidental Leather 5589 Installation Overview

1. Select right- or left-hand version.
2. Slide case onto work belt; position on dominant-hand side.
3. Load tools into dedicated pockets and sleeves.
4. Attach tape rolls to the chain and small items to the utility clip.
5. Check fit and comfort before use.

Occidental Leather 5006 Key Features

• Natural sheepskin lining for maximum comfort
• Thick harness leather exterior with .75"+ wool padding
• No leading edge to dig into hips or restrict circulation
• Slides under tool bags; fits belts up to 3" wide
• Requires 1–2" additional belt length
• Dimensions of hip area between belt slots: 10" x 6"
• Handmade in USA

Occidental Leather 5006 Applications

• Increase comfort when carrying loaded tool belts
• Distribute belt weight across hips to reduce pressure points
• Add cushioning under tool bags for long workdays
• Upgrade for most 3" and narrower work belts

Occidental Leather 5006 Installation Overview

1. Remove or loosen tool bags from your belt.
2. Slide each pad onto the belt so it sits under the bag location.
3. Allow 1–2" extra belt length for the added padding.
4. Reposition and secure tool bags over the pads.
5. Adjust fit for comfort and even weight distribution.

Occidental Leather 9501 Features

• Cost-efficient fastener management
• Single clip-on design for fast application changes
• Keeps multiple pouches preloaded and organized
• Adds fastener storage or sub-divides larger bags
• Secure steel clip mounts to belts up to 2" wide; can clip to toolboxes or bags
• Compact and lightweight for tight setups
• Made in USA

Occidental Leather 9501 Applications

• Expand fastener storage on existing tool belts
• Organize task-specific screws, nails, and small parts
• Sub-divide main tool bags for better part separation
• Clip to toolbox or truck interior for on-the-go organization

Occidental Leather 9501 Installation Overview

1. Verify the mounting surface (belt up to 2" wide, toolbox edge, or bag rim).
2. Position the steel clip over the edge or belt.
3. Press down until the clip fully engages and the pouch is secure.
4. Load fasteners and confirm balanced, accessible placement.

Occidental Leather 9596 Key Features

• NoSpill™ leather tool holders form to tools and help prevent drops
• Hand-specific organization for efficient workflow
• Adjust-to-Fit belt for 32"–40" waists
• Ergonomic design for balanced weight and all-day comfort
• All-leather bag construction; built for long-term jobsite use
• Made in the USA

Occidental Leather 9596 Applications

• Industrial and commercial electrical installations
• Service calls and troubleshooting
• Rough-in and trim-out electrical work
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the used hole to confirm sizing.
2. Set the Adjust-to-Fit belt to your measurement (within 32"–40" range).
3. Position pouches and holders for hand-specific access.
4. Secure the belt at the midpoint hole for best adjustment range.
5. Load tools and confirm comfort and balance before use.

Occidental Leather 5500 Features

• All-leather construction for durability
• 15 pockets & tool holders for organized access
• Flashlight loop & heavy-duty hammer holder
• Electrical tape chain & quick-release tool snap
• Tunnel loop mount fits belts up to 3″ wide
• Made in the USA

Occidental Leather 5500 Applications

• Daily electrical service work
• Organized on-belt storage for tools
• Maintenance & repair tasks
• Residential & commercial installations

Occidental Leather 5500 Installation Overview

1. Slide the tunnel loop over a work belt (up to 3″ wide).
2. Position pouch for preferred tool access.
3. Load tools into designated pockets & holders.
4. Use quick-release snap & tape chain for attachments.
5. Confirm secure fit & balance before use.

Occidental Leather 5022 Features

• Top-grain leather exterior for durability and comfort
• Non-marring design won’t scuff finished floors
• Thick high-density padding for all-day support
• Internal plastic shield helps eliminate pressure points
• Quick-release fasteners for rapid on/off
• Made in USA

Occidental Leather 5022 Applications

• Flooring installs without scuffing surfaces
• Trim and finish carpentry
• Cabinetry work
• Interior remodeling tasks
• General low-height work where knee comfort matters

Occidental Leather 5022 Installation Overview

1. Place pads over knees with straps positioned behind the leg.
2. Engage quick-release fasteners and tighten to a secure, comfortable fit.
3. Check alignment; ensure padding and shield sit centered on the knee.
4. Test mobility and readjust straps as needed.
5. Release fasteners to remove when finished.

Occidental Leather 9502 Features

• Double clip-on design adds fastener capacity and subdivides existing bags
• Leather clip-on patch ideal for phone, notebook, or small tools
• Clips securely to belts up to 2″ or to toolboxes
• Industrial nylon construction for lightweight durability
• Made in the USA

Occidental Leather 9502 Applications

• Add-on fastener storage for existing tool belts
• Organize small tools & hardware on the job
• Sub-divide main bags for better workflow
• Preload and clip to toolbox or truck for quick access
• Use on work belts up to 2″ wide

Occidental Leather 9502 Installation Overview

1. Position pouch clip on a work belt up to 2″ wide or on a toolbox edge.
2. Secure the clip fully and check for a tight hold.
3. Load fasteners or small tools into the main and outer bags.
4. Optionally use it to sub-divide items in your primary bags.
5. Remove and store when not in use.

Occidental Leather 5010 Features

• 1″ wide full-grain leather loop with safety release snap
• Quick access for saw keys, hex wrenches, tag tools, and more
• Slides onto most standard work belts
• Durable leather construction with metal snap hardware
• Lightweight, low-profile accessory — Made in USA

Occidental Leather 5010 Applications

• Quick-access storage for small hand tools
• Organizing keys and tag tools on a work belt
• Adding utility to tool belts, vests, and rigs

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt or rig.
2. Position it where it is most accessible.
3. Clip your tool or key to the safety snap and verify it is secure.

Key Features

• Divided upright interior — 16 screwdriver loops and 9 compartments
• Exterior storage — 6 pockets and 6 tool loops for fast access
• Rugged leather luggage-style handle for comfortable carry
• Steel D-rings ready for optional shoulder strap (not included)
• Heavy, lock-stitched nylon thread and reinforced bottom for durability
• Comes with 9501 Clip-On Bag and two 2003 Oxy Tool Shields
• Upright design keeps tools standing for easy identification
• Made in the USA

Applications

• Electrician and service technician tool organization
• Jobsite carry for hand tools, testers, and fasteners
• Bench-side storage for frequently used screwdrivers and pliers
• Clip-on accessory use for fastener and small-part access
• Daily professional maintenance and repair tasks

Installation Overview

1. Organize the interior: place screwdrivers in the 16 loops and sort tools into the 9 center compartments.
2. Use exterior storage: load pliers, drivers, and markers into the 6 pockets and 6 tool loops.
3. Attach accessories: clip on the 9501 bag and use the snap clip/location strap for add-ons.
4. Protect sharp tools: insert chisels or knives into the Oxy Tool Shields (2003).
5. Optional carry: attach a shoulder strap to the steel D-rings if desired (strap not included).

Occidental Leather 6568 Features

• All-leather construction with reinforced stitching for durability
• Secure snap closure keeps devices protected
• Clip-on attachment for quick belt or pocket mounting
• Fits Construction Master models I, II, III, IV and other brands
• Also available as a belt-worn model (5068)

Occidental Leather 6568 Applications

• Carry and protect construction calculators on the jobsite
• Quick access to calculator during layout and measurement tasks
• Hands-free storage while climbing ladders or moving materials

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the flap and snap to secure.
3. Slide the metal clip over your belt or waistband until fully seated.
4. Verify the case is firmly attached before working.

Occidental Leather 5031 Features

• Belt-worn dee provides a secure snap point for tools and testers
• Fits work belts up to 3″ wide
• 3/4″ dee ring sized for common spring snaps
• Leather strap with metal hardware for durability

Occidental Leather 5031 Applications

• Attaching telephone butt-sets and testers
• Securing small tools with spring snaps
• Adding an auxiliary connection point to a work belt

Occidental Leather 5031 Installation Overview

1. Slide the leather loop onto a work belt up to 3″ wide.
2. Position at the desired location on the belt.
3. Attach your tool’s spring snap or lanyard to the 3/4″ dee ring.
4. Verify the snap is fully engaged before use.

Occidental Leather 9511 Features

• Cost-efficient fastener management
• Single clip-on design enables quick swaps between tasks
• Deeper, narrower profile than model 9501 for added capacity with a compact footprint
• Heavy-duty clip secures to belts up to 2" wide; also clips to toolboxes or truck interiors
• Quick-access storage for nails, screws, and small fasteners
• Made in the USA

Occidental Leather 9511 Applications

• Carry and organize nails, screws, and small hardware
• Create modular, swap-in/out fastener setups by task
• Clip-on storage for belts, toolboxes, or vehicle interiors
• General carpentry, framing, finish work, and DIY projects

Occidental Leather 9511 Installation Overview

1. Attach the pouch clip to a work belt up to 2" wide or a secure edge on a toolbox/truck panel.
2. Load with fasteners and ensure the pouch is seated and balanced.
3. Verify the clip is fully engaged before use.

Occidental Leather 2580LH Features

• Maximum comfort with wide, padded shoulder support lined with Dri-Lex to wick away perspiration
• Fully adjustable straps for freedom of movement; one size fits most
• Even load distribution to reduce lower-back fatigue
• 36 total pockets & tool holders for quick, clutter-free access
• Quick-release chest buckle for fast on/off
• Heavy-duty rear "D" ring for hanging storage
• Quick disconnect 3" leather belting; accepts tunnel-loop bags up to 8.5" wide
• Belt-free system with removable bags for finish work or tight spaces
• Left-handed layout; right-handed version available as 2580
• Made in USA

Occidental Leather 2580LH Applications

• Framing crews seeking balanced carry & fast access
• Electrical work with distributed tool load
• Concrete forming and finishing tasks
• Trim/finish carpentry in tight spaces (bags removable)

Occidental Leather 2580LH Installation Overview

1. Adjust shoulder and side straps for a centered, comfortable fit.
2. Attach tool bags to the 3" leather belting via tunnel loops (up to 8.5").
3. Distribute tools evenly across both sides to balance weight.
4. Secure the chest buckle and confirm full range of motion.
5. Use the rear D-ring for hanging storage when not in use.