Occidental Leather
Occidental Leather 461020 SM Sawdust Sage Carpenter Set Small
Occidental Leather 461020 SM Sawdust Sage Carpenter Set Description
A durable, lightweight carpenter tool belt set built from 1000D CORDURA® nylon with water-repellent coating. Designed for all-day comfort and organization, it features purpose-built tool and fastener pouches, a padded hammer sleeve, and a metal COBRA® buckle on a contoured belt for secure, quick adjustment.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch (3 along back, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo up front with three small slots and one deep pocket
- Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, dual outside pouches, slots in each fastener pouch, reinforced bar slot underneath
- Contoured belt with Austrian-made metal COBRA® buckle
- American-made foam, military-grade tactical webbing and hardware; heavyweight thread
- 1000 Denier CORDURA® Nylon with water-repellent coating; reinforced pouch bottoms for puncture and abrasion resistance
- Padded hammer sleeve on tool side; lightweight yet rugged construction
Applications
- General carpentry and remodeling
- Framing and rough-in tasks
- Finish work and trim installation
- Jobsite tool and fastener organization
- Multi-trade construction tasks requiring mobility
Installation Overview
- Select the correct size and place the contoured belt at waist/hips.
- Position tool and fastener pouches to dominant and non-dominant sides.
- Secure the COBRA® buckle and snug the belt for a comfortable fit.
- Load tools and fasteners into designated slots and pouches.
- Fine-tune belt and pouch placement for balance and access.
Specifications
| Brand | Occidental Leather |
| Model | 461020 SM |
| Type | Carpenter Set |
| Size | Small |
| Color | Sawdust Sage |
| Padded Portion of Belt | 29″ (74 cm) |
| Belt Height Measurement | 30″ – 34″ |
| Material | 1000D CORDURA® Nylon, tactical webbing, foam padding |
| Buckle | Metal COBRA® quick-release |
| Country of Origin | USA (buckle foreign-made) |
Occidental Leather 461020 SM Sawdust Sage Carpenter Set Small
Small Sawdust Sage carpenter tool belt set
✓ 1000D CORDURA® nylon with water-repellent finish
✓ COBRA® metal buckle on contoured padded belt
✓ Dedicated tool & fastener pouches with reinforced bottoms
✓ Padded hammer sleeve on tool side
✓ Small size in Sawdust Sage
Out of stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Care and Maintenance:
- Remove all tools and debris from the pouches and shake out dust before cleaning.
- Spot clean or hand wash the 1000D Cordura nylon with lukewarm water and a mild soap/detergent using a soft brush or cloth.
- Rinse thoroughly to remove soap residue; avoid prolonged soaking of the metal/plastic hardware.
- Do not use bleach, solvents, or fabric softeners and do not dry clean.
- Air dry completely in a well?ventilated area out of direct heat or sunlight; do not tumble dry or iron.
- After exposure to heavy sweat or salt water, rinse with fresh water and dry fully to protect hardware.
- If water repellency diminishes, reapply a suitable DWR (water?repellent) fabric spray to the Cordura when dry.
- Store in a cool, dry place; do not store wet or with heavy loads left in the pouches.
- Organized tool side — 5-slot main pouch, outside lower pouch with tool slot, rear tool loop; pencil/utility combo with 3 small slots and 1 deep pocket
- Fastener side — tape pouch nail set slots, speed square slot, lower tool slot, dual outside pouches, reinforced bar slot
- Rugged build — 1000D CORDURA® nylon, American-made foam, tactical webbing, heavy thread; water-repellent coating
- COBRA® buckle on contoured belt for quick, secure closure
- Size: Small; Padded belt: 29″; Belt height: 30″–34″; Color: Sawdust Sage; Made in USA
More About Occidental Leather 461020 SM Sawdust Sage Carpenter Set Small
Occidental Leather 461020 SM Sawdust Sage Carpenter Set Description
A durable, lightweight carpenter tool belt set built from 1000D CORDURA® nylon with water-repellent coating. Designed for all-day comfort and organization, it features purpose-built tool and fastener pouches, a padded hammer sleeve, and a metal COBRA® buckle on a contoured belt for secure, quick adjustment.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch (3 along back, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo up front with three small slots and one deep pocket
- Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, dual outside pouches, slots in each fastener pouch, reinforced bar slot underneath
- Contoured belt with Austrian-made metal COBRA® buckle
- American-made foam, military-grade tactical webbing and hardware; heavyweight thread
- 1000 Denier CORDURA® Nylon with water-repellent coating; reinforced pouch bottoms for puncture and abrasion resistance
- Padded hammer sleeve on tool side; lightweight yet rugged construction
Applications
- General carpentry and remodeling
- Framing and rough-in tasks
- Finish work and trim installation
- Jobsite tool and fastener organization
- Multi-trade construction tasks requiring mobility
Installation Overview
- Select the correct size and place the contoured belt at waist/hips.
- Position tool and fastener pouches to dominant and non-dominant sides.
- Secure the COBRA® buckle and snug the belt for a comfortable fit.
- Load tools and fasteners into designated slots and pouches.
- Fine-tune belt and pouch placement for balance and access.
Specifications
| Brand | Occidental Leather |
| Model | 461020 SM |
| Type | Carpenter Set |
| Size | Small |
| Color | Sawdust Sage |
| Padded Portion of Belt | 29″ (74 cm) |
| Belt Height Measurement | 30″ – 34″ |
| Material | 1000D CORDURA® Nylon, tactical webbing, foam padding |
| Buckle | Metal COBRA® quick-release |
| Country of Origin | USA (buckle foreign-made) |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
