Occidental Leather
Occidental Leather 461020 LG Sawdust Sage Carpenter Set Large
Occidental Leather 461020 LG Sawdust Sage Carpenter Set Description
A versatile carpenter tool belt set in Sawdust Sage built from 1000 Denier CORDURA® nylon with water-repellent coating and rugged tactical webbing reinforcements. Features a metal COBRA buckle, padded contoured belt, and thoughtfully organized tool and fastener pouches for efficient workflow from framing through finish work. Size: Large.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch (3 rear, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo with 3 small slots and one deep pocket
- Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, side-by-side outer pouches, slots in each fastener pouch, reinforced bar slot under bag
- Metal COBRA buckle; contoured padded belt for comfort
- 1000D CORDURA® nylon with water-repellent finish; USA-made foam and tactical webbing reinforcements
- Hammer sleeve on tool side; lightweight yet highly durable construction
Applications
- General carpentry and remodeling
- Framing tasks requiring fastener and tool organization
- Finish work where quick access to small tools is needed
- Jobsite tool and fastener carry for multi-trade use
Installation Overview
- Measure at belt height to confirm Large size (fits 42"–46").
- Adjust the padded belt and secure the metal COBRA buckle.
- Load dominant-side pouch with hand tools; stock fasteners in the opposite pouch.
- Place speed square, tape, and nail sets in designated slots.
- Use hammer sleeve and rear loops to secure long-handled tools.
Specifications
| Size | Large |
| Padded Portion of Belt | 41" (104 cm) |
| Your Measurement at Belt Height | 42"–46" (107–117 cm) |
| Color | Sawdust Sage |
| Type | Carpenter Set |
| Fabric | 1000D CORDURA® nylon, water-repellent |
| Buckle | Metal COBRA |
| Reinforcement | USA-made tactical webbing on pouch bottoms |
| Hammer Sleeve | On tool side |
| Made In | USA (COBRA buckle is Austrian-made) |
NOTE: Verify fit at belt height and load-out before use to ensure comfort and balance.
Occidental Leather 461020 LG Sawdust Sage Carpenter Set Large
Large Sawdust Sage carpenter tool belt set
✓ Large size fits 42"–46" at belt height
✓ 1000D CORDURA® with water-repellent finish
✓ Metal COBRA buckle with contoured padded belt
✓ Dedicated slots for tape, speed square & nail sets
✓ Hammer sleeve on tool side
Out of stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Care & Maintenance (CORDURA Nylon Tool Belt)
- Routine cleaning: Shake out debris from pouches and brush off dust. Wipe the exterior/interior with a damp cloth.
- Spot clean by hand with mild soap and lukewarm water using a soft cloth or brush; rinse thoroughly.
- Do not machine wash, tumble dry, iron, or dry clean.
- Avoid bleach, harsh detergents, solvents, and fabric softeners, as they can damage the water?repellent coating and webbing.
- Air dry completely in a well?ventilated area away from direct sunlight or high heat before storage or use.
- Hardware care: Keep the COBRA buckle and other metal/plastic hardware free of dirt; wipe clean and ensure fully dry. Do not lubricate or submerge hardware.
- Water repellency: If repellency diminishes over time, apply a DWR (durable water?repellent) treatment suitable for nylon according to the product instructions.
- Storage: Remove heavy tools, then store the belt hanging in a cool, dry place. Do not store while wet or compressed.
- After exposure to saltwater or cement dust, rinse with fresh water and allow to air dry fully.
- Periodic inspection: Check stitching and webbing for wear; discontinue use if structural damage is observed.
- Organized pouch layout — dedicated slots for tape, speed square, nail sets, pencils & hand tools
- Durable build — 1000D CORDURA® nylon with USA-made tactical webbing reinforcements
- Comfortable fit — padded contoured belt with metal COBRA buckle
- Hammer sleeve on tool side
- Size: Large; Padded Belt: 41"; Fits at Belt Height: 42"–46"
- Color: Sawdust Sage
- Made in USA (buckle is Austrian-made)
More About Occidental Leather 461020 LG Sawdust Sage Carpenter Set Large
Occidental Leather 461020 LG Sawdust Sage Carpenter Set Description
A versatile carpenter tool belt set in Sawdust Sage built from 1000 Denier CORDURA® nylon with water-repellent coating and rugged tactical webbing reinforcements. Features a metal COBRA buckle, padded contoured belt, and thoughtfully organized tool and fastener pouches for efficient workflow from framing through finish work. Size: Large.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch (3 rear, 2 front), outside lower pouch with tool slot, rear tool loop; pencil/utility combo with 3 small slots and one deep pocket
- Fastener side: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, side-by-side outer pouches, slots in each fastener pouch, reinforced bar slot under bag
- Metal COBRA buckle; contoured padded belt for comfort
- 1000D CORDURA® nylon with water-repellent finish; USA-made foam and tactical webbing reinforcements
- Hammer sleeve on tool side; lightweight yet highly durable construction
Applications
- General carpentry and remodeling
- Framing tasks requiring fastener and tool organization
- Finish work where quick access to small tools is needed
- Jobsite tool and fastener carry for multi-trade use
Installation Overview
- Measure at belt height to confirm Large size (fits 42"–46").
- Adjust the padded belt and secure the metal COBRA buckle.
- Load dominant-side pouch with hand tools; stock fasteners in the opposite pouch.
- Place speed square, tape, and nail sets in designated slots.
- Use hammer sleeve and rear loops to secure long-handled tools.
Specifications
| Size | Large |
| Padded Portion of Belt | 41" (104 cm) |
| Your Measurement at Belt Height | 42"–46" (107–117 cm) |
| Color | Sawdust Sage |
| Type | Carpenter Set |
| Fabric | 1000D CORDURA® nylon, water-repellent |
| Buckle | Metal COBRA |
| Reinforcement | USA-made tactical webbing on pouch bottoms |
| Hammer Sleeve | On tool side |
| Made In | USA (COBRA buckle is Austrian-made) |
NOTE: Verify fit at belt height and load-out before use to ensure comfort and balance.
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
